TMSPe 1.2 smart scheduler not loading

I have installed new version of TMS 14.4 and TMSPe 1.2 on two redundant server which are load balanced through F5.The redundancy between the two  servers are working as expected but there is an issue with Smart scheduler interface not loading up on one of the server while the for other server it loads up with necessary icons without any issues.
Both the server have same configuration and same set of application installed as per the guide, also tried accessing using different version for IE (9&10) & Chrome but with same error
The server which does not load up the smart scheduler interface comes up with following error when i debug the webpage using console
Failed to load resource: the server responded with a status of 404 (Not Found)
Failed to load resource: the server responded with a status of 503 (Service Unavailable)
Any pointers will highly be appreciated !

The issue got finally resolved by running the following commands on TMS server (run the command as administrator on command prompt) & restart the server
%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe -i
%windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe -i

Similar Messages

  • Smart Album Not Loading Images

    I have not seen a discussion (nor Apple support document) that answers my newest Aperture 3 dilemma. First of all, let me say that I am not new to Aperture. I've been using the program since Aperture 2 was introduced. I have successfully used Smart Albums in the past so I'm familiar with the function.
    I take photos for my son's sports teams. We give a 16x20 framed action shot to the Seniors as a grad gift. I use the jersey number to keyword every image with a senior player. I then create a Smart Album (under the Project in which the images are located) for each senior and select their Keyword (jersey #) as my sort setting... I also select "All" that "Match".
    This usually works like a charm. This sorting is important because I'll have all of "John's" images in one folder and then I export the best ones to a folder on my photo website for the parents/players to view and select their favorite for the enlargement.
    The Smart Albums were working fine a few weeks ago but now the images are not getting loaded into them. Some albums are empty... some have only a dozen photos when I know I have 300+. I have double-checked the metadata and the keywords are still there. I have even deleted the Keyword and retyped it and that image still does not show in the Smart Album. I have double-checked my settings in the album's "Smart Settings" window and all appears correct and normal. These Smart Albums are located under my project so the photos are "there" to find.
    I started experimenting and adding the kid's initials as another keyword, then adding that as a sort preference... the altered ones seem to be showing up (or, at least I have more images than before). So, somehow my original keyword entries are not being recognized. I am in the process of "Updating Previews" hoping that somehow this will "refresh" or "restore" the recognition of the Keywords. Would repairing Aperture permissions or database help?
    I have over 7,000 images in this season's project library (almost 70,000 collective images). I have a tight deadline and cannot afford the time to review every image and either add a new keyword or drag the image to a new album or folder. I really need the Smart Albums to work with the original Keywords.
    My Mac Store (for "one to one" assistance) is over an hour away... does anyone have a suggestion that I can try right away?
    Many thanks for your time.

    Hi Tony,
    Thank you for your ideas. The "Source" library is correct but I have also experimented by creating a new Smart Album outside the project using my entire Library as the Source... it didn't make a difference.
    I feel confident that I have set up the Smart Folder correctly. I believe this is a glitch in my software because I have many Smart Albums set up in various projects and I just discovered that none of them are working properly. I have a Smart Album that contained over 1000 "Fox" images... it's now empty. I have an "Elk/Deer" Smart Album that now only has 20 images (instead of hundreds). I'm not sure where the corruption happened but I know it was recent. The way the program is picking and choosing the images to include/exclude in a Smart Album has no rhyme or reason.
    I don't know if restoring my library from the back-up will make a difference or if my back-up (updated recently) is also corrupted.
    I can tell you this for sure: When you have over 70,000 sorted throughout your system... the prospect of starting over is daunting.
    If anyone else has experienced this, please share the resolution. In the meantime, I think I'll take the computer to a Mac one to one or the Genius Bar and see if they can think of a fix.
    Tony and Kirby, thank you for your time. I appreciate it.

  • Smart Recorder will not load in Audigy 4

    I recently re-installed Audigy 4 and installed all the current updates and Smart recorder will not load. I get a message saying "Smart Recorder has encountered a problem and needs to close". All the other Creative Apps work fine. I am running XP Sp3. Any ideas out there

    anyone?

  • I have the Cruzer Titanium 8GB U3 Smart. Fire-Fox Will not load.

    I have the Sandisk, Fire fox Browser will not load. Do you not support it any more. If you do, or not how would I go about rein-stalling Fire-Fox? Could you help me with this matter?

    Mozilla doesn't make a U-3 version of Firefox. All USB stick / "Portable" versions of Firefox are made by a 3rd party.
    http://portableapps.com/apps/internet/firefox_portable

  • TV listings not loading. (Oops something unexpected happened) etc etc.

    I'm trying to find out what's wrong with the tv listings. Theses pages are loading way too slow or not loading at all. When you click on program info, I get the  "Oops something unexpected happened etc etc".This has been going on for over a week. I'm using Windows 7 and have all updates. Also I'm using the most recent Google Chrome. I have cookies enabled for Comcast/Xfinity. I use a ad block add on but this condition persist regardless of it's settings. I deleted all cookies, cleared the cache and started over on all that with no luck. There appears to be some spy ware associated with the listings page after I used "PageSpeed Insight" to look at the page. I saw reference to Facebook, some ad stuff, and some errors after the program analyzed the page, but I believe the problem is somewhere else. I would appreciate any help with this. I've seen others post similar problems with this tv schedule, but I have not seen much in a remedy besides, "use another listing service". I depend on this but it appears to be undependable. Thanks...jim  

        A technician did call today and he was sure, in a more than non cordial way, that the problems were on our end. He was also sure that Comcast could come out and load the grid on their laptop for 49.95 + tax, which may be true. While this guy was explaining how smart he was, he also explained that Comcast did not fix computers (again, in a more than uncongenial way)  You could tell that this tech did not want to be bothered on his day off, and I may try to contact corporate on that.  Anyway, I tried 3 of the top browsers...IE, Chrome, and Firefox, all with the same results. I also un-installed Flash Player and Java and re-installed those with no luck. In the end, I may have a technician come out to check my pc. The reason I doubt that the pc is the problem is that I just re-installed the operating system. Sunday night....Suddenly, everything is trying to load correctly. It may be a cookie issue. I just checked the option to allow 3rd party cookies (which I don't care to do) All the followers on this subject may try that. I'm going to try to fine tune the cookie thing for Comcast only. By the way...thanks to the very smart Comcast tech...for nothing.

  • IE 11 Does not load pages and "Stops Responding" After 11/26/2013 Windows Update

    I have Windows 7 Pro 64 bit. IE 11. (Doesn't matter if I try to open 32 or 64 bit IE)
    I keep Automatic Updates on and they install as soon as they are available.
    Everything on my PC was running fine 11/25/13.
    I came to it 11/26/13 after Windows Updates ran and now whenever I open any webpages, it does not load the web page 100%, no hyperlinks can be clicked on and once you attempt to click on anything. I get the "IE 11 has stopped responding" bubble.
    It also seemed to affect Firefox which does not completely load pages either.
    Any shove in the correct way to help solve this would be helpful.

    Robert -
    Anyone who has gathered over 13,000 points is certainly to be respected as being super smart and uber helpful.  However, your response is inadequate on two counts.
    First, "stopped working" is not an inexact phrase, nor is it a euphemism trotted out by a newbie who hasn't the skill to describe the problem accurately. "stopped working" is an exact part of the error message issued by Windows.  Of course it would
    help if Windows would issue error messages that are more useful, but that is a different issue. For the purposes of this discussion, "stopped working" as part of the exact error message is a useful piece of information.
    Second, despite your excellent suggestions for hunting down the problem, I'm guessing that few people here have the time or inclination to be beta testers for Microsoft.  Even if the exact cause is found, it is not likely that anyone here will
    be able to fix the problem.  There are literally hundreds of people complaining about this problem in multiple forums.  If you know your consumer behavior metrics, then you know that means tens of thousands are affected.  This is systemic, not
    a random problem on a few errant machines.  Microsoft needs to know that they have a major problem on their hands and they need to fix it.  I saw this problem starting with IE 10.  Is it any wonder that in that time, IE usage has fallen greatly
    while Chrome has become the dominant browser?  (The only reason I am bothering to write instead of just shifting to Chrome is that Chrome also has its bugs, one of which affects a web app I use several times a week, so I need a functioning version of
    IE.)
    So thanks Robert for all your help in the past, but this response isn't helpful.
    Microsoft, are you listening?  Fix your browser.

  • [Regression] KDE4 does not load anymore after recent kernel update.

    Hi,
    I have updated my system to latest packages and now KDE4 does not load. i get a Blank Screen.
    I can't reach virtual terminals(I tried ALT+F1 to F11, but no response)
    Control + ALT + BACKSPACE does not work.
    even magic SysRq key(Alt+SysRq+REISUB) has no effect.
    So I had to hard reset my machine. somehow I managed to get logs.
    /var/log/Xorg.o
    X.Org X Server 1.6.2
    Release Date: 2009-7-7
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH x86_64
    Current Operating System: Linux moody 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64
    Build Date: 18 July 2009 03:49:37PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 30 06:43:33 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Layout0"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Device0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Mouse0"
    (**) Option "Xinerama" "0"
    (**) Option "AutoAddDevices" "False"
    (**) Not automatically adding devices
    (==) Automatically enabling devices
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Loader magic: 0xb40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0:1:0:0) 10de:00f3:0000:0000 nVidia Corporation NV43 [GeForce 6200] rev 162, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf9000000/16777216, BIOS @ 0x????????/131072
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded by default.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "freetype"
    (WW) Warning, couldn't open module freetype
    (II) UnloadModule: "freetype"
    (EE) Failed to load module "freetype" (module does not exist, 0)
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
    (II) NVIDIA GLX Module 185.18.14 Wed May 27 01:53:56 PDT 2009
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.4.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) NVIDIA dlloader X Driver 185.18.14 Wed May 27 01:30:19 PDT 2009
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 01@00:00:0
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "wfb"
    (II) LoadModule: "wfb"
    (II) Loading /usr/lib/xorg/modules//libwfb.so
    (II) Module wfb: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Option "NoLogo" "True"
    (**) NVIDIA(0): Option "RenderAccel" "True"
    (**) NVIDIA(0): Option "TwinView" "0"
    (**) NVIDIA(0): Option "MetaModes" "1280x1024 +0+0"
    (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
    (**) NVIDIA(0): Option "TripleBuffer" "True"
    (**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
    (**) NVIDIA(0): Option "PixmapCacheSize" "300000"
    (**) NVIDIA(0): Enabling RENDER acceleration
    (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) NVIDIA(0): enabled.
    (II) NVIDIA(0): NVIDIA GPU GeForce 6200 (NV43) at PCI:1:0:0 (GPU-0)
    (--) NVIDIA(0): Memory: 131072 kBytes
    (--) NVIDIA(0): VideoBIOS: 05.43.02.80.00
    (II) NVIDIA(0): Detected AGP rate: 8X
    (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
    (--) NVIDIA(0): Samsung SyncMaster (CRT-0)
    (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
    (II) NVIDIA(0): Assigned Display Device: CRT-0
    (II) NVIDIA(0): Validated modes:
    (II) NVIDIA(0): "1280x1024+0+0"
    (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
    (--) NVIDIA(0): DPI set to (104, 113); computed from "UseEdidDpi" X config
    (--) NVIDIA(0): option
    (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) NVIDIA(0): Initialized AGP GART.
    (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    (II) NVIDIA(0): configuration option may not be set correctly. When the
    (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    (II) NVIDIA(0): Config Options in the README.
    (II) NVIDIA(0): Initialized AGP GART.
    (II) NVIDIA(0): Initialized AGP GART.
    (II) NVIDIA(0): Initialized AGP GART.
    (II) NVIDIA(0): Initialized AGP GART.
    (II) NVIDIA(0): Initialized AGP GART.
    (II) NVIDIA(0): Initialized AGP GART.
    (II) NVIDIA(0): Initialized AGP GART.
    /var/log/errors.log
    Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
    Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
    Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
    Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
    Jul 27 12:08:50 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
    Jul 27 12:08:54 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
    Jul 27 12:09:04 moody kdm[4164]: X server startup timeout, terminating
    Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
    Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
    Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
    Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
    Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
    Jul 30 06:43:36 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
    Jul 30 06:43:40 moody kernel: NVRM: Xid (0001:00): 6, PE0000 18d8 e46e72b0 00000000 ffffffff 00000000
    Jul 30 06:43:50 moody kdm[4165]: X server startup timeout, terminating
    Jul 30 06:44:15 moody kdm[4165]: X server for display :0 cannot be started, session disabled
    /etc/X11/xorg.conf
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 1.0 (buildmeister@builder62) Tue Jan 6 09:44:34 PST 2009
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 1.0 (buildmeister@builder58) Wed Oct 1 15:12:53 PDT 2008
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "Module"
    Load "dbe"
    Load "extmod"
    # Load "type1"
    Load "freetype"
    Load "glx"
    EndSection
    Section "ServerFlags"
    Option "AutoAddDevices" "False"
    Option "Xinerama" "0"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Samsung SyncMaster"
    HorizSync 30.0 - 71.0
    VertRefresh 50.0 - 160.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 6200"
    Option "NoLogo" "True"
    Option "RenderAccel" "True"
    Option "TripleBuffer" "True"
    Option "BackingStore" "True"
    Option "PixmapCacheSize" "300000"
    Option "OnDemandVBlankInterrupts" "True"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "TwinViewXineramaInfoOrder" "CRT-0"
    Option "metamodes" "1280x1024 +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Looks like X server is not starting for some reason and this is the root cause of the problem.
    Here is the list of Packages which were Updated
    /var/log/pacman.log
    [2009-07-25 07:36] synchronizing package lists
    [2009-07-25 07:37] starting full system upgrade
    [2009-07-25 10:03] synchronizing package lists
    [2009-07-25 10:03] starting full system upgrade
    [2009-07-25 10:07] upgraded boost (1.39.0-1 -> 1.39.0-2)
    [2009-07-25 10:07] upgraded cups (1.3.10-3 -> 1.3.11-1)
    [2009-07-25 10:07] upgraded device-mapper (1.02.32-2 -> 1.02.33-1)
    [2009-07-25 10:07] upgraded dmapi (2.2.10-1 -> 2.2.10-2)
    [2009-07-25 10:07] upgraded dri2proto (2.0-1 -> 2.1-1)
    [2009-07-25 10:07] upgraded gcc-libs (4.4.0-5 -> 4.4.1-1)
    [2009-07-25 10:08] upgraded gcc (4.4.0-5 -> 4.4.1-1)
    [2009-07-25 10:08] upgraded hwdetect (2009.07-1 -> 2009.07-2)
    [2009-07-25 10:08] upgraded kbd (1.15-1 -> 1.15-2)
    [2009-07-25 10:08] >>> Updating module dependencies. Please wait ...
    [2009-07-25 10:08] >>> MKINITCPIO SETUP
    [2009-07-25 10:08] >>> ----------------
    [2009-07-25 10:08] >>> If you use LVM2, Encrypted root or software RAID,
    [2009-07-25 10:08] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2009-07-25 10:08] >>> More information about mkinitcpio setup can be found here:
    [2009-07-25 10:08] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2009-07-25 10:08]
    [2009-07-25 10:08] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2009-07-25 10:08] ==> Building image "default"
    [2009-07-25 10:08] ==> Running command: /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2009-07-25 10:08] :: Begin build
    [2009-07-25 10:08] :: Parsing hook [base]
    [2009-07-25 10:08] :: Parsing hook [udev]
    [2009-07-25 10:08] :: Parsing hook [autodetect]
    [2009-07-25 10:08] :: Parsing hook [ide]
    [2009-07-25 10:08] :: Parsing hook [scsi]
    [2009-07-25 10:08] :: Parsing hook [sata]
    [2009-07-25 10:08] :: Parsing hook [usb]
    [2009-07-25 10:08] :: Parsing hook [usbinput]
    [2009-07-25 10:08] :: Parsing hook [keymap]
    [2009-07-25 10:08] :: Parsing hook [filesystems]
    [2009-07-25 10:08] :: Generating module dependencies
    [2009-07-25 10:08] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2009-07-25 10:08] ==> SUCCESS
    [2009-07-25 10:08] ==> Building image "fallback"
    [2009-07-25 10:08] ==> Running command: /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2009-07-25 10:08] :: Begin build
    [2009-07-25 10:08] :: Parsing hook [base]
    [2009-07-25 10:09] :: Parsing hook [udev]
    [2009-07-25 10:09] :: Parsing hook [ide]
    [2009-07-25 10:09] :: Parsing hook [scsi]
    [2009-07-25 10:09] :: Parsing hook [sata]
    [2009-07-25 10:09] :: Parsing hook [usb]
    [2009-07-25 10:09] :: Parsing hook [usbinput]
    [2009-07-25 10:09] :: Parsing hook [keymap]
    [2009-07-25 10:09] :: Parsing hook [filesystems]
    [2009-07-25 10:10] :: Generating module dependencies
    [2009-07-25 10:10] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2009-07-25 10:10] ==> SUCCESS
    [2009-07-25 10:10] upgraded kernel26 (2.6.30.1-1 -> 2.6.30.2-1)
    [2009-07-25 10:10] upgraded lib32-libgl (7.4.4-1 -> 7.5-1)
    [2009-07-25 10:10] upgraded lib32-libpng (1.2.37-1 -> 1.2.38-1)
    [2009-07-25 10:10] upgraded lib32-mesa (7.4.4-1 -> 7.5-1)
    [2009-07-25 10:10] upgraded lib32-pango (1.24.4-2 -> 1.24.5-1)
    [2009-07-25 10:10] upgraded libtool (2.2.6a-2 -> 2.2.6a-3)
    [2009-07-25 10:10] upgraded libv4l (0.5.99-1 -> 0.6.0-1)
    [2009-07-25 10:10] upgraded lvm2 (2.02.47-2 -> 2.02.48-1)
    [2009-07-25 10:10] upgraded mesa (7.4.4-1 -> 7.5-1)
    [2009-07-25 10:10] upgraded pango (1.24.4-2 -> 1.24.5-1)
    [2009-07-25 10:10] upgraded perl-html-parser (3.60-1 -> 3.61-1)
    [2009-07-25 10:10] upgraded perl-libwww (5.825-1 -> 5.829-1)
    [2009-07-25 10:10] upgraded qtcurve-gtk2 (0.65.3-1 -> 0.66.0-1)
    [2009-07-25 10:10] upgraded qtcurve-kde4 (0.65.4-1 -> 0.66.1-1)
    [2009-07-25 10:10] upgraded smplayer (0.6.7-1 -> 0.6.8-1)
    [2009-07-25 10:10] upgraded xorg-server (1.6.1.901-3 -> 1.6.2-1)
    System Config:
    AMD Athlon 64 3000+
    Archlinux 2.6.30.2 X86_64
    KDE 4.2 Unstable
    Nvidia Geforce 6200 Video card
    please tell me how to get my desktop back.:)
    Last edited by cool (2009-07-30 17:06:32)

    Installed the nvidia-beta driver from AUR. version:190.18. it crashed on me.
    [code]____________________________________________
    Start of NVIDIA bug report log file.  Please include this file
    when reporting a graphics driver bug via the nV News NVIDIA
    Linux forum (see www.nvnews.net) or by sending email to
    '[email protected]'.
    nvidia-bug-report.sh Version: 3969188
    Date: Sat Aug  1 18:50:38 PDT 2009
    uname: Linux moody 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64 AMD Athlon(tm) 64 Processor 3000+ AuthenticAMD GNU/Linux
    X.Org X Server 1.6.2
    Release Date: 2009-7-7
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH x86_64
    Current Operating System: Linux moody 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64
    Build Date: 18 July 2009  03:49:37PM
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug  1 18:30:08 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Layout0"
    (**) |-->Screen "Screen0" (0)
    (**) |   |-->Monitor "Monitor0"
    (**) |   |-->Device "Device0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Mouse0"
    (**) Option "Xinerama" "0"
    (**) Option "AllowEmptyInput" "off"
    (**) Option "AutoAddDevices" "False"
    (**) Not automatically adding devices
    (==) Automatically enabling devices
    (==) FontPath set to:
        /usr/share/fonts/misc,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/TTF,
        /usr/share/fonts/Type1,
        built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Loader magic: 0xb40
    (II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 5.0
        X.Org XInput driver : 4.0
        X.Org Server Extension : 2.0
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0:1:0:0) 10de:00f3:0000:0000 nVidia Corporation NV43 [GeForce 6200] rev 162, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf9000000/16777216, BIOS @ 0x????????/131072
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
        [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [4] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [5] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [6] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [7] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [8] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [9] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [10] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [11] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [12] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [13] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [14] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [15] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [16] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [17] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [18] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [19] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [20] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [21] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [22] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [23] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [24] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [25] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [26] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [27] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [28] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [29] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [30] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [31] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [32] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [33] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [34] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [35] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [36] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [37] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [38] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [39] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [40] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [41] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [42] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [43] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [44] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [45] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [46] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [47] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [48] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [49] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [50] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [51] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [52] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [53] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [54] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [55] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [56] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [57] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [58] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [59] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded by default.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.6.2, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.6.2, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "freetype"
    (WW) Warning, couldn't open module freetype
    (II) UnloadModule: "freetype"
    (EE) Failed to load module "freetype" (module does not exist, 0)
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
        compiled for 4.0.2, module version = 1.0.0
        Module class: X.Org Server Extension
    (II) NVIDIA GLX Module  190.18  Wed Jul 22 16:35:50 PDT 2009
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
        compiled for 1.6.2, module version = 1.13.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
        compiled for 1.6.2, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
        compiled for 1.6.2, module version = 1.1.0
        ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
        compiled for 4.0.2, module version = 1.0.0
        Module class: X.Org Video Driver
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
        compiled for 1.6.0, module version = 1.3.2
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
        compiled for 1.6.0, module version = 1.4.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 4.0
    (II) NVIDIA dlloader X Driver  190.18  Wed Jul 22 15:47:48 PDT 2009
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 01@00:00:0
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
        compiled for 1.6.2, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "wfb"
    (II) LoadModule: "wfb"
    (II) Loading /usr/lib/xorg/modules//libwfb.so
    (II) Module wfb: vendor="X.Org Foundation"
        compiled for 1.6.2, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) resource ranges after probing:
        [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [4] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [5] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [6] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [7] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [8] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [9] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [10] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [11] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [12] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [13] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [14] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [15] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [16] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [17] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [18] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [19] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [20] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [21] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [22] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [23] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [24] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [25] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [26] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [27] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [28] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [29] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [30] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [31] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [32] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [33] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [34] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [35] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [36] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [37] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [38] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [39] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [40] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [41] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [42] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [43] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [44] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [45] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [46] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [47] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [48] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [49] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [50] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [51] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [52] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [53] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [54] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [55] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [56] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [57] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [58] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [59] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Option "NoLogo" "True"
    (**) NVIDIA(0): Option "RenderAccel" "True"
    (**) NVIDIA(0): Option "TwinView" "0"
    (**) NVIDIA(0): Option "MetaModes" "1280x1024 +0+0"
    (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
    (**) NVIDIA(0): Option "TripleBuffer" "True"
    (**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
    (**) NVIDIA(0): Option "PixmapCacheSize" "300000"
    (**) Aug 01 18:30:10 NVIDIA(0): Enabling RENDER acceleration
    (II) Aug 01 18:30:10 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) Aug 01 18:30:10 NVIDIA(0):     enabled.
    (II) Aug 01 18:30:12 NVIDIA(0): NVIDIA GPU GeForce 6200 (NV43) at PCI:1:0:0 (GPU-0)
    (--) Aug 01 18:30:12 NVIDIA(0): Memory: 131072 kBytes
    (--) Aug 01 18:30:12 NVIDIA(0): VideoBIOS: 05.43.02.80.00
    (II) Aug 01 18:30:12 NVIDIA(0): Detected AGP rate: 8X
    (--) Aug 01 18:30:12 NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) Aug 01 18:30:12 NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
    (--) Aug 01 18:30:12 NVIDIA(0):     Samsung SyncMaster (CRT-0)
    (--) Aug 01 18:30:12 NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
    (II) Aug 01 18:30:12 NVIDIA(0): Assigned Display Device: CRT-0
    (II) Aug 01 18:30:12 NVIDIA(0): Validated modes:
    (II) Aug 01 18:30:12 NVIDIA(0):     "1280x1024+0+0"
    (II) Aug 01 18:30:12 NVIDIA(0): Virtual screen size determined to be 1280 x 1024
    (--) Aug 01 18:30:12 NVIDIA(0): DPI set to (104, 113); computed from "UseEdidDpi" X config
    (--) Aug 01 18:30:12 NVIDIA(0):     option
    (==) Aug 01 18:30:12 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC?  No, I don't.
    (II) resource ranges after preInit:
        [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [4] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [5] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [6] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [7] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [8] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [9] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [10] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [11] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [12] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [13] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [14] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [15] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [16] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [17] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [18] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [19] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [20] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [21] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [22] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [23] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [24] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [25] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [26] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [27] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [28] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [29] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [30] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [31] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [32] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [33] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [34] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [35] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [36] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [37] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [38] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [39] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [40] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [41] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [42] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [43] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [44] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [45] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [46] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [47] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [48] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [49] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [50] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [51] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [52] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [53] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [54] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [55] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [56] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [57] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [58] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [59] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    (WW) Aug 01 18:30:12 NVIDIA(0): Failed to allocate GLX video capture device array.
    (II) Aug 01 18:30:12 NVIDIA(0): Initialized AGP GART.
    (II) Aug 01 18:30:12 NVIDIA(0): Setting mode "1280x1024+0+0"
    Backtrace:
    0: /usr/bin/X(xorg_backtrace+0x26) [0x4ee2e6]
    1: /usr/bin/X(xf86SigHandler+0x6f) [0x47b1cf]
    2: /lib/libc.so.6 [0x7f4b2a26cf90]
    3: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv000988X+0x23) [0x7f4b27067893]
    4: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b2702f988]
    5: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv001911X+0x2e) [0x7f4b2707975e]
    6: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b27075814]
    7: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv002497X+0xaa) [0x7f4b27075faa]
    8: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv000979X+0x19d) [0x7f4b270503fd]
    9: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b2704cf69]
    10: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b272a9d88]
    11: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b272aa53e]
    12: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0x7f4b2729b0bc]
    13: /usr/bin/X(AddScreen+0x1d4) [0x433114]
    14: /usr/bin/X(InitOutput+0x76f) [0x46e12f]
    15: /usr/bin/X(main+0x1fe) [0x43381e]
    16: /lib/libc.so.6(__libc_start_main+0xfd) [0x7f4b2a2599ed]
    17: /usr/bin/X [0x432e59]
    Fatal server error:
    Caught signal 11.  Server aborting
    Please consult the The X.Org Foundation support
         at http://wiki.x.org
    for help.
    Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    /etc/X11/xorg.conf
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings:  version 1.0  (buildmeister@builder62)  Tue Jan  6 09:44:34 PST 2009
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig:  version 1.0  (buildmeister@builder58)  Wed Oct  1 15:12:53 PDT 2008
    Section "ServerLayout"
        Identifier     "Layout0"
        Screen      0  "Screen0" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "Module"
        Load           "dbe"
        Load           "extmod"
    #    Load           "type1"
        Load           "freetype"
        Load           "glx"
    EndSection
    Section "ServerFlags"
        Option         "AutoAddDevices" "False"
        Option         "Xinerama" "0"
        Option       "AllowEmptyInput" "off"
    EndSection
    Section "InputDevice"
        # generated from default
        Identifier     "Mouse0"
        Driver         "mouse"
        Option         "Protocol" "auto"
        Option         "Device" "/dev/psaux"
        Option         "Emulate3Buttons" "no"
        Option         "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
        # generated from default
        Identifier     "Keyboard0"
        Driver         "kbd"
    EndSection
    Section "Monitor"
        Identifier     "Monitor0"
        VendorName     "Unknown"
        ModelName      "Samsung SyncMaster"
        HorizSync       30.0 - 71.0
        VertRefresh     50.0 - 160.0
        Option         "DPMS"
    EndSection
    Section "Device"
        Identifier     "Device0"
        Driver         "nvidia"
        VendorName     "NVIDIA Corporation"
        BoardName      "GeForce 6200"
        Option         "NoLogo" "True"
        Option         "RenderAccel" "True"
        Option         "TripleBuffer" "True"
        Option         "BackingStore" "True"
        Option         "PixmapCacheSize" "300000"
        Option         "OnDemandVBlankInterrupts" "True"
    EndSection
    Section "Screen"
        Identifier     "Screen0"
        Device         "Device0"
        Monitor        "Monitor0"
        DefaultDepth    24
        Option         "TwinView" "0"
        Option         "TwinViewXineramaInfoOrder" "CRT-0"
        Option         "metamodes" "1280x1024 +0+0"
        SubSection     "Display"
            Depth       24
        EndSubSection
    EndSection
    ldd /usr/bin/glxinfo
        linux-vdso.so.1 =>  (0x00007fff7bdff000)
        libGL.so.1 => /usr/lib/libGL.so.1 (0x00007f02ea6dc000)
        libm.so.6 => /lib/libm.so.6 (0x00007f02ea45a000)
        libc.so.6 => /lib/libc.so.6 (0x00007f02ea107000)
        libX11.so.6 => /usr/lib/libX11.so.6 (0x00007f02e9dcc000)
        libGLcore.so.1 => /usr/lib/libGLcore.so.1 (0x00007f02e89a2000)
        libnvidia-tls.so.1 => /usr/lib/libnvidia-tls.so.1 (0x00007f02ea9b8000)
        libXext.so.6 => /usr/lib/libXext.so.6 (0x00007f02e8790000)
        libdl.so.2 => /lib/libdl.so.2 (0x00007f02e858c000)
        /lib/ld-linux-x86-64.so.2 (0x00007f02ea8cb000)
        libxcb.so.1 => /usr/lib/libxcb.so.1 (0x00007f02e8370000)
        libXau.so.6 => /usr/lib/libXau.so.6 (0x00007f02e816e000)
        libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0x00007f02e7f69000)
    /usr/sbin/lspci -d "10de:*" -v -xxx
    01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6200] (rev a2) (prog-if 00 [VGA controller])
        Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 16
        Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
        Memory at e0000000 (32-bit, prefetchable) [size=256M]
        Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
        [virtual] Expansion ROM at fa000000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [44] AGP version 3.0
        Kernel driver in use: nvidia
        Kernel modules: nvidia, nvidiafb
    00: de 10 f3 00 07 00 b0 02 a2 00 00 03 00 f8 00 00
    10: 00 00 00 f8 08 00 00 e0 00 00 00 f9 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 05 01
    40: 00 00 00 00 02 00 30 00 1b 0e 00 ff 02 03 00 1f
    50: 00 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
    60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00
    70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    90: 00 00 00 00 00 80 00 00 01 04 40 c1 00 00 00 00
    a0: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    /usr/sbin/lspci -t
    -[0000:00]-+-00.0
               +-00.1
               +-00.2
               +-00.3
               +-00.4
               +-00.7
               +-01.0-[0000:01]----00.0
               +-0f.0
               +-0f.1
               +-10.0
               +-10.1
               +-10.2
               +-10.3
               +-10.4
               +-11.0
               +-11.5
               +-12.0
               +-18.0
               +-18.1
               +-18.2
               \-18.3
    /usr/sbin/dmidecode
    # dmidecode 2.10
    SMBIOS 2.3 present.
    33 structures occupying 998 bytes.
    Table at 0x000F0800.
    Handle 0x0000, DMI type 0, 20 bytes
    BIOS Information
        Vendor: Phoenix Technologies, LTD
        Version: 6.00 PG
        Release Date: 06/01/2005
        Address: 0xE0000
        Runtime Size: 128 kB
        ROM Size: 512 kB
        Characteristics:
            ISA is supported
            PCI is supported
            PNP is supported
            APM is supported
            BIOS is upgradeable
            BIOS shadowing is allowed
            ESCD support is available
            Boot from CD is supported
            Selectable boot is supported
            BIOS ROM is socketed
            EDD is supported
            5.25"/360 kB floppy services are supported (int 13h)
            5.25"/1.2 MB floppy services are supported (int 13h)
            3.5"/720 kB floppy services are supported (int 13h)
            3.5"/2.88 MB floppy services are supported (int 13h)
            Print screen service is supported (int 5h)
            8042 keyboard services are supported (int 9h)
            Serial services are supported (int 14h)
            Printer services are supported (int 17h)
            CGA/mono video services are supported (int 10h)
            ACPI is supported
            USB legacy is supported
            AGP is supported
            LS-120 boot is supported
            ATAPI Zip drive boot is supported
            BIOS boot specification is supported
    Handle 0x0001, DMI type 1, 25 bytes
    System Information
        Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD
        Product Name: MS-7142
        Version: 1.00
        Serial Number: 
        UUID: Not Present
        Wake-up Type: Power Switch
    Handle 0x0002, DMI type 2, 8 bytes
    Base Board Information
        Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD
        Product Name: MS-7142
        Version: 1.00
        Serial Number: 
    Handle 0x0003, DMI type 3, 17 bytes
    Chassis Information
        Manufacturer: 
        Type: Desktop
        Lock: Not Present
        Version: 
        Serial Number: 
        Asset Tag: 
        Boot-up State: Unknown
        Power Supply State: Unknown
        Thermal State: Unknown
        Security Status: Unknown
        OEM Information: 0x00000000
    Handle 0x0004, DMI type 4, 35 bytes
    Processor Information
        Socket Designation: Socket 754
        Type: Central Processor
        Family: Athlon 64
        Manufacturer: AMD
        ID: C0 0F 00 00 FF FB 8B 07
        Signature: Family 15, Model 12, Stepping 0
        Flags:
            FPU (Floating-point unit on-chip)
            VME (Virtual mode extension)
            DE (Debugging extension)
            PSE (Page size extension)
            TSC (Time stamp counter)
            MSR (Model specific registers)
            PAE (Physical address extension)
            MCE (Machine check exception)
            CX8 (CMPXCHG8 instruction supported)
            APIC (On-chip APIC hardware supported)
            SEP (Fast system call)
            MTRR (Memory type range registers)
            PGE (Page global enable)
            MCA (Machine check architecture)
            CMOV (Conditional move instruction supported)
            PAT (Page attribute table)
            PSE-36 (36-bit page size extension)
            CLFSH (CLFLUSH instruction supported)
            MMX (MMX technology supported)
            FXSR (Fast floating-point save and restore)
            SSE (Streaming SIMD extensions)
            SSE2 (Streaming SIMD extensions 2)
        Version: AMD Athlon(tm) 64 Processor 3000+
        Voltage: 1.5 V
        External Clock: 200 MHz
        Max Speed: 3000 MHz
        Current Speed: 2000 MHz
        Status: Populated, Enabled
        Upgrade: Socket 754
        L1 Cache Handle: 0x0008
        L2 Cache Handle: 0x0009
        L3 Cache Handle: Not Provided
        Serial Number: 
        Asset Tag: 
        Part Number: 
    Handle 0x0005, DMI type 5, 20 bytes
    Memory Controller Information
        Error Detecting Method: 64-bit ECC
        Error Correcting Capabilities:
            None
        Supported Interleave: One-way Interleave
        Current Interleave: One-way Interleave
        Maximum Memory Module Size: 4096 MB
        Maximum Total Memory Size: 8192 MB
        Supported Speeds:
            70 ns
            60 ns
            50 ns
        Supported Memory Types:
            Standard
            DIMM
        Memory Module Voltage: 2.9 V
        Associated Memory Slots: 2
            0x0006
            0x0007
        Enabled Error Correcting Capabilities: None
    Handle 0x0006, DMI type 6, 12 bytes
    Memory Module Information
        Socket Designation: A0
        Bank Connections: None
        Current Speed: 5 ns
        Type: Unknown EDO
        Installed Size: Not Installed
        Enabled Size: Not Installed
        Error Status: OK
    Handle 0x0007, DMI type 6, 12 bytes
    Memory Module Information
        Socket Designation: A1
        Bank Connections: 2 3
        Current Speed: 5 ns
        Type: Unknown EDO
        Installed Size: 1024 MB (Double-bank Connection)
        Enabled Size: 1024 MB (Double-bank Connection)
        Error Status: OK
    Handle 0x0008, DMI type 7, 19 bytes
    Cache Information
        Socket Designation: Internal Cache
        Configuration: Enabled, Not Socketed, Level 1
        Operational Mode: Write Back
        Location: Internal
        Installed Size: 128 kB
        Maximum Size: 128 kB
        Supported SRAM Types:
            Synchronous
        Installed SRAM Type: Synchronous
        Speed: Unknown
        Error Correction Type: Unknown
        System Type: Unknown
        Associativity: Unknown
    Handle 0x0009, DMI type 7, 19 bytes
    Cache Information
        Socket Designation: External Cache
        Configuration: Enabled, Not Socketed, Level 2
        Operational Mode: Write Back
        Location: Internal
        Installed Size: 512 kB
        Maximum Size: 512 kB
        Supported SRAM Types:
            Synchronous
        Installed SRAM Type: Synchronous
        Speed: Unknown
        Error Correction Type: Unknown
        System Type: Unknown
        Associativity: Unknown
    Handle 0x000A, DMI type 8, 9 bytes
    Port Connector Information
        Internal Reference Designator: PRIMARY IDE
        Internal Connector Type: On Board IDE
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other
    Handle 0x000B, DMI type 8, 9 bytes
    Port Connector Information
        Internal Reference Designator: SECONDARY IDE
        Internal Connector Type: On Board IDE
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: Other
    Handle 0x000C, DMI type 8, 9 bytes
    Port Connector Information
        Internal Reference Designator: FDD
        Internal Connector Type: On Board Floppy
        External Reference Designator: Not Specified
        External Connector Type: None
        Port Type: 8251 FIFO Compatible
    Handle 0x000D, DMI type 8, 9 bytes
    Port Connector Information
        Internal Reference Designator: COM1
        Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
        External Reference Designator: 
        External Connector Type: DB-9 male
        Port Type: Serial Port 16450 Compatible
    Handle 0x000E, DMI type 8, 9 bytes
    Port Connector Information
        Internal Reference Designator: COM2
        Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
        External Reference Designator: 
        External Connector Type: DB-9 male
        Port Type: Serial Port 16450 Compatible
    Handle 0x000F, DMI type 8, 9 bytes
    Port Connector Information
        Internal Reference Designator: LPT1
        Internal Connector Type: DB-25 female
        External Reference Designator: 
        External Connector Type: DB-25 female
        Port Type: Parallel Port ECP/EPP
    Handle 0x0010, DMI type 8, 9 bytes
    Port Connector Information
        Internal Reference Designator: Keyboard
        Internal Connector Type: PS/2
        External Reference Designator: 
        External Connector Type: PS/2
        Port Type: Keyboard Port
    Handle 0x0011, DMI type 8, 9 bytes
    Port Connector Information
        Internal Reference Designator: PS/2 Mouse
        Internal Connector Type: PS/2
        External Reference Designator: 
        External Connector Type: PS/2
        Port Type: Mouse Port
    Handle 0x0012, DMI type 8, 9 bytes
    Port Connector Information
        Internal Reference Designator: Not Specified
        Internal Connector Type: None
        External Reference Designator: USB0
        External Connector Type: Other
        Port Type: USB
    Handle 0x0013, DMI type 9, 13 bytes
    System Slot Information
        Designation: PCI0
        Type: 32-bit PCI
        Current Usage: Available
        Length: Long
        ID: 1
        Characteristics:
            5.0 V is provided
            PME signal is supported
    Handle 0x0014, DMI type 9, 13 bytes
    System Slot Information
        Designation: PCI1
        Type: 32-bit PCI
        Current Usage: Available
        Length: Long
        ID: 2
        Characteristics:
            5.0 V is provided
            PME signal is supported
    Handle 0x0015, DMI type 9, 13 bytes
    System Slot Information
        Designation: PCI2
        Type: 32-bit PCI
        Current Usage: Available
        Length: Long
        ID: 3
        Characteristics:
            5.0 V is provided
            PME signal is supported
    Handle 0x0016, DMI type 9, 13 bytes
    System Slot Information
        Designation: PCI3
        Type: 32-bit PCI
        Current Usage: In Use
        Length: Long
        ID: 0
        Characteristics:
            5.0 V is provided
            PME signal is supported
    Handle 0x0017, DMI type 9, 13 bytes
    System Slot Information
        Designation: AGP
        Type: 32-bit AGP
        Current Usage: In Use
        Length: Long
        ID: 8
        Characteristics:
            5.0 V is provided
    Handle 0x0018, DMI type 13, 22 bytes
    BIOS Language Information
        Installable Languages: 3
            n|US|iso8859-1
            n|US|iso8859-1
            r|CA|iso8859-1
        Currently Installed Language: n|US|iso8859-1
    Handle 0x0019, DMI type 16, 15 bytes
    Physical Memory Array
        Location: System Board Or Motherboard
        Use: System Memory
        Error Correction Type: None
        Maximum Capacity: 8 GB
        Error Information Handle: Not Provided
        Number Of Devices: 2
    Handle 0x001A, DMI type 17, 27 bytes
    Memory Device
        Array Handle: 0x0019
        Error Information Handle: Not Provided
        Total Width: 64 bits
        Data Width: 64 bits
        Size: No Module Installed
        Form Factor: DIMM
        Set: None
        Locator: A0
        Bank Locator: Bank0/1
        Type: Unknown
        Type Detail: None
        Speed: Unknown
        Manufacturer: None
        Serial Number: None
        Asset Tag: None
        Part Number: None
    Handle 0x001B, DMI type 17, 27 bytes
    Memory Device
        Array Handle: 0x0019
        Error Information Handle: Not Provided
        Total Width: 64 bits
        Data Width: 64 bits
        Size: 1024 MB
        Form Factor: DIMM
        Set: None
        Locator: A1
        Bank Locator: Bank2/3
        Type: Unknown
        Type Detail: None
        Speed: Unknown
        Manufacturer: None
        Serial Number: None
        Asset Tag: None
        Part Number: None
    Handle 0x001C, DMI type 19, 15 bytes
    Memory Array Mapped Address
        Starting Address: 0x00000000000
        Ending Address: 0x0003FFFFFFF
        Range Size: 1 GB
        Physical Array Handle: 0x0019
        Partition Width: 0
    Handle 0x001D, DMI type 20, 19 bytes
    Memory Device Mapped Address
        Starting Address: 0x00000000000
        Ending Address: 0x000000003FF
        Range Size: 1 kB
        Physical Device Handle: 0x001A
        Memory Array Mapped Address Handle: 0x001C
        Partition Row Position: 1
    Handle 0x001E, DMI type 20, 19 bytes
    Memory Device Mapped Address
        Starting Address: 0x00000000000
        Ending Address: 0x0003FFFFFFF
        Range Size: 1 GB
        Physical Device Handle: 0x001B
        Memory Array Mapped Address Handle: 0x001C
        Partition Row Position: 1
    Handle 0x001F, DMI type 32, 11 bytes
    System Boot Information
        Status: No errors detected
    Handle 0x0020, DMI type 127, 4 bytes
    End Of Table
    /sbin/modinfo nvidia | grep vermagic
    vermagic:       2.6.30-ARCH SMP preempt mod_unload
    Scanning kernel log files for NVRM messages:
    /var/log/messages is not readable
      /var/log/kernel.log:
    Aug  1 17:43:55 moody kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  185.18.14  Wed May 27 01:23:47 PDT 2009
    Aug  1 18:26:08 moody kernel: NVRM: API mismatch: the client has the version 190.18, but
    Aug  1 18:26:08 moody kernel: NVRM: this kernel module has the version 185.18.14.  Please
    Aug  1 18:26:08 moody kernel: NVRM: make sure that this kernel module and all NVIDIA driver
    Aug  1 18:26:08 moody kernel: NVRM: components have the same version.
    Aug  1 18:27:04 moody kernel: NVRM: API mismatch: the client has the version 190.18, but
    Aug  1 18:27:04 moody kernel: NVRM: this kernel module has the version 185.18.14.  Please
    Aug  1 18:27:04 moody kernel: NVRM: make sure that this kernel module and all NVIDIA driver
    Aug  1 18:27:04 moody kernel: NVRM: components have the same version.
    Aug  1 18:29:30 moody kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.18  Wed Jul 22 15:36:09 PDT 2009
    Aug  1 18:30:12 moody kernel: NVRM: Xid (0001:00): 6, PE0000 0104 00000000 00000000 ffffffff 00000000
    Aug  1 18:30:12 moody kernel: NVRM: Xid (0001:00): 6, PE0000 0104 00000000 00000000 ffffffff 00000000
    dmesg:
    Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.0 20090630 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009
    Command line: root=/dev/disk/by-uuid/ee4f81b6-1e0f-4ab9-a1e2-d6109732dbc5 ro
    KERNEL supported cpus:
      Intel GenuineIntel
      AMD AuthenticAMD
      Centaur CentaurHauls
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
    BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
    BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
    BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
    DMI 2.3 present.
    Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
    e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    last_pfn = 0x3fff0 max_arch_pfn = 0x100000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
      00000-9FFFF write-back
      A0000-BFFFF uncachable
      C0000-C7FFF write-protect
      C8000-CFFFF uncachable
      D0000-D7FFF write-back
      D8000-FFFFF uncachable
    MTRR variable ranges enabled:
      0 base 0000000000 mask FFC0000000 write-back
      1 base 00F0000000 mask FFF8000000 write-combining
      2 disabled
      3 disabled
      4 disabled
      5 disabled
      6 disabled
      7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Scanning 0 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009f400 (usable)
    modified: 000000000009f400 - 00000000000a0000 (reserved)
    modified: 00000000000f0000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 000000003fff0000 (usable)
    modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
    modified: 000000003fff3000 - 0000000040000000 (ACPI data)
    modified: 00000000fec00000 - 00000000fec01000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000ffff0000 - 0000000100000000 (reserved)
    init_memory_mapping: 0000000000000000-000000003fff0000
    0000000000 - 003fe00000 page 2M
    003fe00000 - 003fff0000 page 4k
    kernel direct mapping tables up to 3fff0000 @ 10000-13000
    RAMDISK: 37f00000 - 37fefc8d
    ACPI: RSDP 00000000000f6b80 00014 (v00 VIAK8M)
    ACPI: RSDT 000000003fff3040 0002C (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000)
    ACPI: FACP 000000003fff30c0 00074 (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000)
    ACPI: DSDT 000000003fff3180 04D34 (v01 VIAK8M AWRDACPI 00001000 MSFT 0100000E)
    ACPI: FACS 000000003fff0000 00040
    ACPI: APIC 000000003fff7f00 0005A (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000)
    ACPI: Local APIC address 0xfee00000
    (7 early reservations) ==> bootmem [0000000000 - 003fff0000]
      #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
      #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
      #2 [0000200000 - 000082c0d0]    TEXT DATA BSS ==> [0000200000 - 000082c0d0]
      #3 [0037f00000 - 0037fefc8d]          RAMDISK ==> [0037f00000 - 0037fefc8d]
      #4 [000009f400 - 0000100000]    BIOS reserved ==> [000009f400 - 0000100000]
      #5 [000082d000 - 000082d0b6]              BRK ==> [000082d000 - 000082d0b6]
      #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
    found SMP MP-table at [ffff8800000f4b80] f4b80
    [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0
    Zone PFN ranges:
      DMA      0x00000010 -> 0x00001000
      DMA32    0x00001000 -> 0x00100000
      Normal   0x00100000 -> 0x00100000
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
        0: 0x00000010 -> 0x0000009f
        0: 0x00000100 -> 0x0003fff0
    On node 0 totalpages: 262015
      DMA zone: 56 pages used for memmap
      DMA zone: 1680 pages reserved
      DMA zone: 2247 pages, LIFO batch:0
      DMA32 zone: 3528 pages used for memmap
      DMA32 zone: 254504 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x4008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    SMP: Allowing 1 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
    NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:1 nr_node_ids:1
    PERCPU: Embedded 25 pages at ffff88000100a000, static data 72352 bytes
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256751
    Kernel command line: root=/dev/disk/by-uuid/ee4f81b6-1e0f-4ab9-a1e2-d6109732dbc5 ro
    Initializing CPU#0
    NR_IRQS:768
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    Fast TSC calibration using PIT
    Detected 1999.604 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
    Checking aperture...
    AGP bridge at 00:00:00
    Aperture from AGP @ f0000000 old size 32 MB
    Aperture from AGP @ f0000000 size 128 MB (APSIZE f20)
    Node 0: aperture @ f0000000 size 128 MB
    Memory: 1024112k/1048512k available (3409k kernel code, 452k absent, 23372k reserved, 1239k data, 460k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.84 BogoMIPS (lpj=6665346)
    Security Framework initialized
    Mount-cache hash table entries: 256
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    tseg: 0000000000
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 20k freed
    ACPI: Core revision 20090320
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
    CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00
    Brought up 1 CPUs
    Total of 1 processors activated (4000.84 BogoMIPS).
    CPU0 attaching NULL sched-domain.
    net_namespace: 1888 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    node 0 link 0: io port [1000, fffff]
    TOM: 0000000040000000 aka 1024M
    node 0 link 0: mmio [a0000, bffff]
    node 0 link 0: mmio [40000000, ff70ffff]
    bus: [00,ff] on node 0 link 0
    bus: 00 index 0 io port: [0, ffff]
    bus: 00 index 1 mmio: [a0000, bffff]
    bus: 00 index 2 mmio: [40000000, fcffffffff]
    ACPI: bus type pci registered
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI Warning (dsobject-0502): Package List length (6) larger than NumElements count (3), truncated
    [20090320]
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: No dock devices found.
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
    pci 0000:00:01.0: supports D1
    pci 0000:00:0f.0: reg 10 io port: [0xe000-0xe007]
    pci 0000:00:0f.0: reg 14 io port: [0xe100-0xe103]
    pci 0000:00:0f.0: reg 18 io port: [0xe200-0xe207]
    pci 0000:00:0f.0: reg 1c io port: [0xe300-0xe303]
    pci 0000:00:0f.0: reg 20 io port: [0xe400-0xe40f]
    pci 0000:00:0f.0: reg 24 io port: [0xe500-0xe5ff]
    pci 0000:00:0f.1: reg 20 io port: [0xe600-0xe60f]
    pci 0000:00:10.0: reg 20 io port: [0xe700-0xe71f]
    pci 0000:00:10.0: supports D1 D2
    pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.0: PME# disabled
    pci 0000:00:10.1: reg 20 io port: [0xe800-0xe81f]
    pci 0000:00:10.1: supports D1 D2
    pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.1: PME# disabled
    pci 0000:00:10.2: reg 20 io port: [0xe900-0xe91f]
    pci 0000:00:10.2: supports D1 D2
    pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.2: PME# disabled
    pci 0000:00:10.3: reg 20 io port: [0xea00-0xea1f]
    pci 0000:00:10.3: supports D1 D2
    pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.3: PME# disabled
    pci 0000:00:10.4: reg 10 32bit mmio: [0xfb000000-0xfb0000ff]
    pci 0000:00:10.4: supports D1 D2
    pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.4: PME# disabled
    HPET not enabled in BIOS. You might try hpet=force boot option
    pci 0000:00:11.5: reg 10 io port: [0xeb00-0xebff]
    pci 0000:00:11.5: supports D1 D2
    pci 0000:00:12.0: reg 10 io port: [0xec00-0xecff]
    pci 0000:00:12.0: reg 14 32bit mmio: [0xfb001000-0xfb0010ff]
    pci 0000:00:12.0: supports D1 D2
    pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:12.0: PME# disabled
    pci 0000:01:00.0: reg 10 32bit mmio: [0xf8000000-0xf8ffffff]
    pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xefffffff]
    pci 0000:01:00.0: reg 18 32bit mmio: [0xf9000000-0xf9ffffff]
    pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
    pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfaffffff]
    pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
    ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
    ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
    ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
    PCI: Using ACPI for IRQ routing
    pci 0000:00:00.0: BAR 0: can't allocate resource
    NetLabel: Initializing
    NetLabel:  domain hash size = 128
    NetLabel:  protocols = UNLABELED CIPSOv4
    NetLabel:  unlabeled traffic allowed by default
    agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
    agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: mem resource (0xdcc00-0xdffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
    pnp 00:00: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
    pnp 00:00: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
    pnp 00:00: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
    pnp 00:00: mem resource (0x100000-0x3ffeffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
    pnp: PnP ACPI: found 12 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved
    system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
    system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved
    system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
    system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
    system 00:02: ioport range 0x4000-0x407f has been reserved
    system 00:02: ioport range 0x5000-0x500f has been reserved
    system 00:03: ioport range 0xb78-0xb7b has been reserved
    system 00:03: ioport range 0xf78-0xf7b has been reserved
    system 00:03: ioport range 0xa78-0xa7b has been reserved
    system 00:03: ioport range 0xe78-0xe7b has been reserved
    system 00:03: ioport range 0xbbc-0xbbf has been reserved
    system 00:03: ioport range 0xfbc-0xfbf has been reserved
    system 00:03: ioport range 0x4d0-0x4d1 has been reserved
    system 00:03: ioport range 0x290-0x297 has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0:   IO window: disabled
    pci 0000:00:01.0:   MEM window: 0xf8000000-0xfaffffff
    pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
    pci 0000:00:01.0: setting latency timer to 64
    pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
    pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
    pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfaffffff]
    pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
    TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs...
    Freeing initrd memory: 959k freed
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1249151352.183:1): initialized
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 2003
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:01.0: disabling DAC on VIA PCI bridge
    pci 0000:01:00.0: Boot video device
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    serio: i8042 KBD port at 0x60,0x64 irq 1
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 460k freed
    Uniform Multi-Platform E-IDE driver
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    via82cxxx 0000:00:0f.1: VIA vt8237 (rev 00) IDE UDMA133
    via82cxxx 0000:00:0f.1: IDE controller (0x1106:0x0571 rev 0x06)
    ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
    VIA_IDE 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
    via82cxxx 0000:00:0f.1: not 100% native mode: will probe irqs later
        ide0: BM-DMA at 0xe600-0xe607
        ide1: BM-DMA at 0xe608-0xe60f
    Probing IDE interface ide0...
    Switched to high resolution mode on CPU 0
    Probing IDE interface ide1...
    hdc: BENQ DVD DD DW1650, ATAPI CD/DVD-ROM drive
    hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
    hdc: UDMA/33 mode selected
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    ide1 at 0x170-0x177,0x376 on irq 15
    SCSI subsystem initialized
    libata version 3.00 loaded.
    sata_via 0000:00:0f.0: version 2.4
    sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
    sata_via 0000:00:0f.0: routed to hard irq line 11
    scsi0 : sata_via
    scsi1 : sata_via
    ata1: SATA max UDMA/133 cmd 0xe000 ctl 0xe100 bmdma 0xe400 irq 20
    ata2: SATA max UDMA/133 cmd 0xe200 ctl 0xe300 bmdma 0xe408 irq 20
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-7: ST380815AS, 4.AAB, max UDMA/133
    ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
    ata1.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access     ATA      ST380815AS       4.AA PQ: 0 ANSI: 5
    ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
    ide-cd driver 5.00
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
    ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
    ehci_hcd 0000:00:10.4: EHCI Host Controller
    ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:10.4: irq 21, io mem 0xfb000000
    ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda:<6>ide-cd: hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
    Uniform CD-ROM driver Revision: 3.20
    sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:10.0: UHCI Host Controller
    uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e700
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:10.1: UHCI Host Controller
    uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e800
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:10.2: UHCI Host Controller
    uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e900
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:10.3: UHCI Host Controller
    uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:10.3: irq 21, io base 0x0000ea00
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    usb 1-5: new high speed USB device using ehci_hcd and address 3
    usb 1-5: configuration #1 chosen from 1 choice
    Initializing USB Mass Storage driver...
    scsi2 : SCSI emulation for USB Mass Storage devices
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usb-storage: device found at 3
    usb-storage: waiting for device to settle before scanning
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs: mounted filesystem with writeback data mode.
    usb 2-2: new low speed USB device using uhci_hcd and address 2
    usb 2-2: configuration #1 chosen from 1 choice
    rtc_cmos 00:05: RTC can wake from S4
    rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, y3k, 242 bytes nvram
    udev: starting version 141
    via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
    via-rhine: Broken BIOS detected, avoid_D3 enabled.
    ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
    via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23
    eth0: VIA Rhine II at 0x1ec00, 00:11:09:06:18:c6, IRQ 23.
    eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
    ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
    VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
    VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
    vboxdrv: Trying to deactivate the NMI watchdog permanently...
    vboxdrv: Successfully done.
    vboxdrv: Found 1 processor cores.
    VBoxDrv: dbg - g_abExecMemory=ffffffffa02a36a0
    vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    vboxdrv: Successfully loaded version 3.0.2 (interface 0x000e0000).
    VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0447ec0
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    ACPI: Power Button [PWRF]
    input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    ACPI: Power Button [PWRB]
    processor ACPI_CPU:00: registered

  • Can I delete extensions that do not load or am I looking for trouble

    After running EtreCheck I noticed that many extensions do not load.  So my question is: Can I delete extensions that do not load or am I looking for trouble?
    Here is the EtreCheck report:
    Problem description:
    slow with Yosemite
    EtreCheck version: 2.1.8 (121)
    Report generated February 19, 2015 at 12:11:22 PM EST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        Mac Pro (Late 2013) (Technical Specifications)
        Mac Pro - model: MacPro6,1
        1 3 GHz 8-Core Intel Xeon E5 CPU: 8-core
        32 GB RAM Upgradeable
            DIMM1
                8 GB DDR3 ECC 1866 MHz ok
            DIMM2
                8 GB DDR3 ECC 1866 MHz ok
            DIMM3
                8 GB DDR3 ECC 1866 MHz ok
            DIMM4
                8 GB DDR3 ECC 1866 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en2: 802.11 a/b/g/n/ac
    Video Information: ℹ️
        AMD FirePro D500 - VRAM: 3072 MB
        AMD FirePro D500 - VRAM: 3072 MB
            Thunderbolt Display 2048 x 1152
            Thunderbolt Display 2048 x 1152
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 2:10:13
    Disk Information: ℹ️
        APPLE SSD SM1024F disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 999.32 GB (760.04 GB free)
                Core Storage: disk0s2 999.70 GB Online
    USB Information: ℹ️
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        American Power Conversion Smart-UPS 3000 XL FW:691.18.D USB FW:7.3
        Prolific Technology Inc. USB-SATA Bridge
        Apple Inc. Display Audio
        Apple Inc. FaceTime HD Camera (Display)
        Apple Inc. Apple Thunderbolt Display
        Apple, Inc. Keyboard Hub
            Apple Inc. Apple Keyboard
        Apple Inc. FaceTime HD Camera (Display)
        Apple Inc. Apple Thunderbolt Display
        Apple Inc. Display Audio
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus_2
            Apple Inc. Thunderbolt Display
        Apple Inc. thunderbolt_bus_1
        Apple Inc. thunderbolt_bus_0
            Promise Technology, Inc. Pegasus2-R
                Drobo 5D
            Apple Inc. Thunderbolt Display
    Configuration files: ℹ️
        /etc/hosts - Count: 1
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/MacX Video Converter Pro.app
        [not loaded]    com.macxdvd.driver.goodSysAudioCapture (1 - SDK 10.10) [Click for support]
            /Library/Extensions
        [loaded]    com.TrustedData.driver.VendorSpecificType00 (1.7.0 - SDK 10.7) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.iokit.driver (10.3.4 - SDK 10.9) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.3.4 - SDK 10.9) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.3.4 - SDK 10.9) [Click for support]
        [not loaded]    com.blackmagic-design.driver.BlackmagicIO (10.3.4 - SDK 10.9) [Click for support]
        [not loaded]    com.blackmagic-design.driver.BlackmagicUsbIO (10.3.4 - SDK 10.9) [Click for support]
        [loaded]    com.drobo.SCSI.ThunderBolt (1.1 [70504] - SDK 10.8) [Click for support]
        [loaded]    com.promise.driver.stex (5.2.10 - SDK 10.9) [Click for support]
            /Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
        [not loaded]    com.blackmagic-design.desktopvideo.firmware (10.3.4 - SDK 10.9) [Click for support]
            /System/Library/Extensions
        [loaded]    com.Cycling74.driver.Soundflower (1.5.3 - SDK 10.6) [Click for support]
        [not loaded]    com.FTDI.driver.FTDIUSBSerialDriver (2.2.14) [Click for support]
        [not loaded]    com.Maxtor.driver.PowSecDriver (4.2.7) [Click for support]
        [not loaded]    com.SiliconImage.driver.Si3124u (2.0.3) [Click for support]
        [not loaded]    com.Susteen.driver.PL2303 (1.2.0) [Click for support]
        [loaded]    com.airgrab.driver.AirGrabFirewallModule (3.0) [Click for support]
        [not loaded]    com.aliph.driver.jstub (1.1.2 - SDK 10.7) [Click for support]
        [not loaded]    com.alwaysthinking.thinkinghomeUSB (1.1.7) [Click for support]
        [loaded]    com.attotech.driver.ATTOiSCSI (3.4.1b1 - SDK 10.6) [Click for support]
        [not loaded]    com.cy.iokit.Morpheus (1.4) [Click for support]
        [not loaded]    com.detto.iokit.M2MantiClassic (2.1) [Click for support]
        [not loaded]    com.devguru.driver.SamsungComposite (1.4.26 - SDK 10.6) [Click for support]
        [loaded]    com.globaldelight.driver.BoomDevice (1.1 - SDK 10.1) [Click for support]
        [not loaded]    com.hzsystems.driver.CDSDAudioCaptureSupport (1.5) [Click for support]
        [loaded]    com.hzsystems.terminus.driver (4) [Click for support]
        [not loaded]    com.perceptiveautomation.indigo_overrides.kext (1.0.0d1) [Click for support]
        [not loaded]    com.prolific.driver.PL2303 (1.2.1) [Click for support]
        [not loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.33) [Click for support]
        [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.33) [Click for support]
        [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
        [not loaded]    com.shed.PowerLinc.kext (1.0.0) [Click for support]
        [not loaded]    com.shed.PowerLincCU.kext (1.0.0) [Click for support]
        [not loaded]    com.shed.cm15.kext (1.0.0) [Click for support]
        [not loaded]    com.smithmicro.nke.NetBlockade (4.0) [Click for support]
        [not loaded]    com.wdc.driver.IOFireWireWDHID (1.1.2) [Click for support]
            /System/Library/Extensions/IOFireWireMxBt.kext
        [not loaded]    com.maxtor.iokit.IOFireWireMxBt (3.0.0) [Click for support]
            /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
        [not loaded]    com.devguru.driver.SamsungACMControl (1.4.26 - SDK 10.6) [Click for support]
        [not loaded]    com.devguru.driver.SamsungACMData (1.4.26 - SDK 10.6) [Click for support]
        [not loaded]    com.devguru.driver.SamsungMTP (1.4.26 - SDK 10.5) [Click for support]
        [not loaded]    com.devguru.driver.SamsungSerial (1.4.26 - SDK 10.6) [Click for support]
            /Users/[redacted]/Library/PreferencePanes/Contents/PlugIns/TechTool Pro 7.app
        [not loaded]    com.micromat.driver.spdKernel (1 - SDK 10.8) [Click for support]
        [not loaded]    com.micromat.driver.spdKernel-10-8 (1 - SDK 10.8) [Click for support]
            /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
        [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
        [running]    com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
        [running]    com.micromat.TechToolProAgent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer_desktop.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [running]    com.attotech.iscsid.plist [Click for support]
        [running]    com.backblaze.bzserv.plist [Click for support]
        [loaded]    com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
        [running]    com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
        [running]    com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
        [running]    com.datarobotics.ddservice64d.plist [Click for support]
        [running]    com.datarobotics.ddserviced.plist [Click for support]
        [running]    com.micromat.TechToolProDaemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.starfield.backupservice.plist [Click for support]
        [loaded]    com.teamviewer.Helper.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer_service.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [running]    com.backblaze.bzbmenu.plist [Click for support]
        [loaded]    com.bittorrent.uTorrent.plist [Click for support]
    User Login Items: ℹ️
        Cookie    Application  (/Applications/Cookie.app)
        Network Speed Monitor    Application  (/Applications/Network Speed Monitor.app)
        CleanAgent    Application  (/Applications/Clean.app/Contents/Resources/CleanAgent.app)
        SpeechSynthesisServer    Application  (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
        ClamXav Sentry    Application  (/Applications/ClamXav.app/Contents/Resources/ClamXav Sentry.app)
    Internet Plug-ins: ℹ️
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        LogMeInSafari32: Version: 1.0.1001 - SDK 10.7 [Click for support]
        Scorch: Version: Unknown - SDK 10.2 [Click for support]
        AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
        DirectorShockwave: Version: 11.0.3r472 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Click for support]
        AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 [Click for support]
        CANONiMAGEGATEWAYDL: Version: 3.1.0.2 [Click for support]
        DivXBrowserPlugin: Version: 2.2 [Click for support]
        Musicnotes: Version: 1.19.0 [Click for support]
        LogMeIn: Version: 1.0.1001 - SDK 10.7 [Click for support]
        OVSHelper: Version: 1.1 [Click for support]
        Google Earth Web Plug-in: Version: 6.1 [Click for support]
        AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flip4Mac WMV Plugin: Version: 2.3.4.1 [Click for support]
        SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
        OfficeLiveBrowserPlugin: Version: 12.2.8 [Click for support]
    User internet Plug-ins: ℹ️
        WbeTools64_14: Version: 1.0.23.53 © 2013 - SDK 10.6 [Click for support]
        WebEx: Version: 1.0 [Click for support]
        WebEx64: Version: 1.0 - SDK 10.5 [Click for support]
        Folx3Plugin: Version: 4.0 - SDK 10.6 [Click for support]
        fileEditTool64_15: Version: 1.0.35.65 © 2013 - SDK 10.6 [Click for support]
    Safari Extensions: ℹ️
        Open in Internet Explorer
        SaveFrom.net helper
    3rd Party Preference Panes: ℹ️
        Akamai NetSession Preferences  [Click for support]
        APC PowerChute Personal Edition  [Click for support]
        Backblaze Backup  [Click for support]
        Blackmagic Desktop Video  [Click for support]
        Flash Player  [Click for support]
        Java  [Click for support]
        TechTool Protection  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 999.32 GB Disk used: 239.28 GB
        Destinations:
            Time Machine-Drobo [Local]
            Total size: 17.59 TB
            Total number of backups: 77
            Oldest backup: 2014-07-18 01:39:12 +0000
            Last backup: 2015-02-19 16:04:28 +0000
            Size of backup disk: Excellent
                Backup size 17.59 TB > (Disk size 999.32 GB X 3)
    Top Processes by CPU: ℹ️
            11%    WindowServer
             6%    Safari
             5%    Mail
             2%    firefox
             1%    bzfilelist
    Top Processes by Memory: ℹ️
        790 MB    firefox
        378 MB    mds_stores
        344 MB    clamd
        309 MB    Safari
        241 MB    Mail
    Virtual Memory Information: ℹ️
        21.17 GB    Free RAM
        6.67 GB    Active RAM
        4.12 GB    Inactive RAM
        2.38 GB    Wired RAM
        6.47 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Feb 19, 2015, 10:00:50 AM    Self test - passed
        Feb 18, 2015, 03:49:35 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/AgileTransCmd_2015-02-18-15493 5_[redacted].crash
        Feb 18, 2015, 03:44:30 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/AgileTransCmd_2015-02-18-15443 0_[redacted].crash
        Feb 16, 2015, 12:12:51 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-02-16-121251_[re dacted].crash

    Starting your Mac in "Safe Mode" (see below) will load only Apple-provided kernel extensions. Observing its perfomance in that mode will be instructive.
    The problems you describe are likely to have been caused by garbage software of which "TechTool Pro" is only one example. That system has been altered from its factory configuration through the installation of several third party system modifications, any one of which can cause poor performance. Interaction between two or more is another possibility. Running a torrent client is another way of inviting malware intrusion.
    Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
    You must disable FileVault before you can start your Mac in Safe Mode.
    Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
    Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
    To end Safe Mode restart your Mac normally. Shutdown will take longer as well.

  • Oracle.DataAccess.dll not loading in 64 - bit OS

    Hi All
    I have a console application that needs to be scheduled in task manager. My system is 32-bit operating system and I’m using Oracle.DataAccess.dll in my application to establish connection to the oracle db. The version is 2.112.1.0 and the processor architecture of this dll in C:\Windows\Assembly is x86. In my local m/c this dll works fine with all 3 build and target platforms – x64, x86 or AnyCPU. But when I copy the files to my staging server which is a 64-bit OS I’m getting the following exception. (Note: I’m also having Oracle.DataAccess version 10.2.0.100 which is also x86 available in C:\Windows\Assembly)
    System.BadImageFormatException: Could not load file or assembly 'Oracle.DataAccess, Version=2.112.1.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. An attempt was made to load a program with an incorrect format.
    File name: 'Oracle.DataAccess, Version=2.112.1.0, Culture=neutral, PublicKeyToken=89b483f429c47342' at
    Assembly manager loaded from: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll
    Running under executable D:\ProjectFolder\MyExecutable.exe
    Assembly manager loaded from: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll
    Running under executable D:\ ProjectFolder\MyExecutable.exe
    --- A detailed error log follows.
    === Pre-bind state information ===
    LOG: User = UserId
    LOG: DisplayName = Oracle.DataAccess, Version=2.112.1.0, Culture=neutral, PublicKeyToken=89b483f429c47342
    (Fully-specified)
    LOG: Appbase = file:///D:/ ProjectFolder/
    LOG: Initial PrivatePath = NULL
    Calling assembly : MyAssembly, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null.
    ===
    LOG: This bind starts in default load context.
    LOG: Using application configuration file: D:\ ProjectFolder\MyExecutable.exe.Config
    LOG: Using host configuration file:
    LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\config\machine.config.
    LOG: Post-policy reference: Oracle.DataAccess, Version=2.112.1.0, Culture=neutral, PublicKeyToken=89b483f429c47342
    LOG: Attempting download of new URL file:///D:/ ProjectFolder/ Oracle.DataAccess.DLL.
    ERR: Failed to complete setup of assembly (hr = 0x8007000b). Probing terminated.
    I have tried to build the application to target AnyCPU / x64 / x86. It fails in all 3 scenarios.
    There are other applications in the staging server where Oracle connection can be established. So ODP.Net should be registered in the server. So looks like problem with my console app. Does anyone have any idea what could be the problem?
    Thanks & Regards,
    Sree

    If I'm reading your post correctly, your application is built using ODP.net 2.112.1.0 (an 11gR2 client) and your other system has 10.2.0.100 (a 10g client).
    That's your problem. When .net tries to load the assembly, it looks for 2.112.1.0. Policy files that get installed when you install the client would allow it to use a newer version instead (like 2.112.3.0), but not to use an older version. So .net doesn't think you have a compatible Oracle client installed.
    You could manually add assembly binding redirects to force it to load 10.2.0.100, but I really don't recommend that given some differences between 10g and 11g (I tried that once and had some weird problems). You could also build the application using 10.2.0.100 instead.
    The best fix for this is to install 2.112.1.0 on the other system, or try out the managed client when it's out of beta (which doesn't need to be installed at all).

  • Web Pages not loading on Mobile Devices

    Browsing web pages not working on mobile devices
    I have bt inifinity 2, from my laptop and mac (with same wifi connection) webpages load no problem, from my android tablet and iphone (with same wifi connection) web pages not loading. On these devices I can load youtube videos, and apps have connections/load data, it seems to be limited just to browsing webpages.
    I have tried changing ssid for the 2 channels, I have tried disabling wifi on the router, and using apple time capsule as the router, everything seems to result in the same problem, you cannot browse web pages on mobile devices.
    previously i had adsl from bt and didnt have these issues.
    Solved!
    Go to Solution.

    Try turning Smart Setup off.
    http://bt.custhelp.com/app/answers/detail/a_id/44328/~/switching-smart-setup-on-and-off-on-the-bt-ho...
    Devices where there are known to be problems include:
    Some Apple devices including iPhone 5 and Apple TV
    some Android smartphones
    Xbox<
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Google Web Pages not loading...

    Hello everyone, I need some help, because I literally have no clue what is going on.
    For some reason, Google websites are not loading on my computer. Gmail notifier does not show me my mail, google.com is not coming up, saying that it was timed out.
    Every other website that I type work correctly and load.
    I am at whits end and these boards seem to have very smart people.
    Thanks again.
    YoHenYo

    also, just to add, i downloaded a version of AOL, to try and see if they would load on there, and the google family of website all loaded.
    So what is up with Safari?

  • Facebook not loading right

    My facebook page will not load right. It looks like it is all starting in the middle and all the pop ups are already opened. Any ideas?

    HI,
    From your Safari menu bar click Safari / Preferences then select the Security tab. Now click: *Show Cookies*. Delete all Facebook cookies.
    Now select the Autofill tab. Click the Edit button next to *Other Forms*. Delete all Facebook url'sl.
    Quit Safari (Command + Q) then relaunch Safari.
    Try accessing Facebook again.
    Mac OS X (10.6.3)
    if you are running v10.6.3, there are software updates available either from your Apple menu / Software Update or System Preferences / Software Update. Select the *Scheduled Check* tab then click *Check Now*
    Carolyn
    Message was edited by: Carolyn Samit

  • I have firfox installed on computer but when i double click on it it does not open or does not load

    i had issue with windows so i hit restore to put computer back to earlier point to fix problem i tried to open firefox and it would not load or open up

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Itunes Store is not loading..can't create an account.=c

    I have read a lot of discussions here to resolve my issue, but I came up with the same result.. my itunes store is not loading. It was working very fine before but now, it really doesn't load. I want to make my newest and first account in itunes store, but it says, "Itunes Store maybe busy. Please check your internet connection".. I have been experiencing this for 1 week now.
    I also ran a diagnostic and it says:
    Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
    Hewlett-Packard HP Pavilion dv2000 (RR096EA#ABV)
    iTunes 8.2.1.6
    QuickTime 7.6.2
    FairPlay 1.4.10
    iPod Updater Library 8.1d19
    CD Driver 2.1.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.5.2.2
    Apple Mobile Device Driver 1.43.0.0
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number ADD5E1CA6820301F
    Current user is an administrator.
    The current local date and time is 2009-09-02 06:30:23.
    iTunes is not running in safe mode.
    Video Display Information
    Mobile Intel(R) 945GM Express Chipset Family
    Mobile Intel(R) 945GM Express Chipset Family
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {18FD773A-1BC0-448B-A6EA-214EF698B868}
    Description: Bluetooth LAN Access Server Driver - Packet Scheduler Miniport
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway:
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Thu Jan 01 03:00:03 1970
    Lease Expires: Thu Jan 01 03:00:03 1970
    DNS Servers:
    Adapter Name: {C7180C43-EAD0-46A8-89D5-CFE98C4D50C8}
    Description: Intel(R) PRO/Wireless 3945BG Network Connection - Packet Scheduler Miniport
    IP Address: 192.168.1.100
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    DHCP Enabled: Yes
    DHCP Server: 192.168.1.1
    Lease Obtained: Wed Sep 02 05:46:42 2009
    Lease Expires: Thu Sep 03 05:46:42 2009
    DNS Servers: 212.77.192.59
    212.77.192.59
    212.77.192.60
    Adapter Name: {0D0E9D39-60BC-4AF4-BA21-8C019D6D8FED}
    Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway:
    DHCP Enabled: Yes
    DHCP Server: 192.168.1.1
    Lease Obtained: Sun May 03 22:17:25 2009
    Lease Expires: Mon May 04 22:17:25 2009
    DNS Servers:
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Disabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    Last successful store access was 2009-09-02 05:33:11.
    Thanks for your help.

    Close itunes
    Check your internet settings.
    Control Panel – Internet Options – Advanced
    Check SSL 3.0 and TLS 1.0
    Uncheck “Check for server certificate revocation (requires restart)”
    Click Apply
    Click Okay
    Open itunes and try again.
    You will need to allow itunes in your security software firewall.

  • Analyzer 7.0: Excel add-ins not loaded on opening workbook

    Hi all,
    we are having a problem with some of our workbooks which are using additional functions from a standard microsoft add-in (Analysis Toolpak - function "mduration" for exmaple).
    The add-in is checked as "load" under Extras->Add-Ins.
    Opening the workbook without analyzer is just fine.
    When opening BEx Analyzer 7.0 and then the Excel workbook, all functions from the add-in (such as "mduration") only return #NAME, as if the add-in is not loaded properly.
    Using BEx Analyzer 3.5 this DOES work, however.
    We are on SAP GUI 7.10 PL11 with BI 7.0 Add-On SP10. Excel version is 2003.
    Does anyone kow whether this is a known problem or if a solution exists (maybe with latest BI Add-On SP)?
    Thanks,
    Hendrik
    Edited by: HMaeder on Jan 21, 2010 9:57 AM

    Hi
    Go through this blog
    /people/john.appleby3/blog/2009/11/09/sap-netweaver-bw-70-excel-workbook-precalculation-or-scheduling
    and also do the global settings
    http://help.sap.com/saphelp_nw70/helpdata/en/f1/0a551ce09411d2acb90000e829fbfe/content.htm
    santosh

Maybe you are looking for