/TMWFLOW/CMSCONF error
Dear All
Upon executing transaction /TMWFLOW/CMSCONF, I am encountering the following error:
Runtime Errors IMPORT_ALIGNMENT_MISMATCH
Except. CX_SY_IMPORT_MISMATCH_ERROR
Date and Time 10.11.2009 15:00:57
Short text
Error when importing object "GS_SYST".
What happened?
Error in the ABAP Application Program
The current ABAP program "/TMWFLOW/SAPLCONFIG_SERVICES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
Can somebody help me out ??
Regards
Bilal Nazir
Is nobody aware of this error ???
Here is the error analysis !
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
not caught in
procedure "/TMWFLOW/ONE_SYSTEM_CHANGE_GET" "(FUNCTION)", nor was it propagated
by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When importing object "GS_SYST", the structure did not match the
structure of the target object. The error occurred in component
no. 55.
Similar Messages
-
/n/tmwflow/cmsconf
Hi,
In Transaction '/n/tmwflow/cmsconf' i am only getting two tabs
1)System Change Option &
2)Critical Objects.
I believe it should have someother tab like General Settings,Distribution Routes & Project structure.
Why its missing here.I am on Solution manager 4 with latest SP's.
Regards,
CherryHi All,
Any solution for this error, I am also getting same error
I have activated Change request management, It refresh successfully, But when i create New Maintenance Cycle it gives 'Solution Manager and Change Request
Management are not consistent'.
SLG1 Error
1) Message no. /TMWFLOW/TASKLIST139
Diagnosis
The task list could not be created correctly. Other messages are in the Application Log, which you can reach as follows:
with the 'Messages about Changes' (next to the 'Display/Change...' radio button ) or 'Creation Messages' (next to the 'Create...' radio button) pushbutton, in the Maintenance Cycle and Projects tabs, in the Environment -> Scheduling menu, in the /TMWFLOW/CMSCONF transaction.
with the transaction SLG1, object /TMWFLOW/CMSCV
2) Message no. /TMWFLOW/TASKLIST145
Diagnosis
The settings in Change Request Management do not correspond to the settings in Solution Manager: The projects of the Change and Transport System (CTS projects) for the Solution Manager project TESTPJ are different.
System Response
The system does not allow you to complete the task list.
Procedure
Go to the central configuration tool of Change Request Management and synchronize the configuration.
3) I have checked the application log from /n/tmwflow/charmchk and found no error -
Systems missing in /TMWFLOW/CMSCONF
Hi Experts,
We have configured ChaRM in solution manager for several landscapes(PI,BI,CRM,SRM..etc). We now want to activate CSOL and unable to see few systems in /TMWFLOW/CMSCONF.
Example my PI Landscape is :T11, A11, P11. i am able to see T11 but not A11 and P11. similar is heh case with BI landscape too.if anybody has encountered this issue and has solution, please help
Appreciate your quick help
AnandHi,
You missed some more config steps, pls follow the christian guidlelines as stated below
[Specifying Critical Transport Objects under Change Management Extend config|Specifying Critical Transport Objects under Change Management Extend config]
[No system listed in /TMWFLOW/CMSCONFIG|No system listed in /TMWFLOW/CMSCONFIG]
let us knw once you checked.
Jansi -
Tab missing in Transaction /n/TMWFLOW/CMSCONF
We have upgraded our SMR 3.2 to SMR 4.0, in SMR 3.2 i can able to see the tab named "Distribution Routes" using /TMWFLOW/CMSCONF transaction.when i used the same t-code SMR 4.0 , i can only able to see System Change Options and Critical objects,Other tabs are not in visible mode ??? how can we retrive the same tab . or else is there any other t-code for Distribution routes ???? guide me ..
im struck up while following the SPRO settings in ChaRM.Send me is there any step by step weblogs are available ???Hi Prakash,
If you are trying to create project cycles with /TMWFLOW/CMSCONF-> Distribution Routes-> Project environment, go to SOLAR_PROJECT_ADMIN -> System landscape-> Project cycles. With Release 4.0, some functions that existed in 3.20 outside of the original tools of the Solution Manager have been reintroduced.
If you need to go to Transport Domains and to navigate to TMS system configuration, go to Transaction SMSY-> Environment -> Domain Controller Overview.
If you need this tab for other function, let us know.
Regards,
Raquel Cunha. -
No systems found in /tmwflow/cmsconf
Hi,
I have included a 4 system landscape DEV -> QAS -> PPR -> PRD in my Maintenance project. Activated Change request Management.
Created Maitenance Cycle.
CTS was configured successfuly.
I could see all green messages in /tmwflow/charmchk
Created Trusted RFCs as well.
But I could not see my system under System Change Options in /tmwflow/cmsconf. Contradicting this, I could see my system under Critical Objects in /tmwflow/cmsconf.
Really wondering what am I missing.
Any pointings will definitely be rewared. Please help.
--RaguHi,
maybe a job is missing.
Try report /TMWFLOW/CONFIG_BATCH_GET to fix this manually or schedule job /TMWFLOW/CONFIG_BATCH_GET
see: http://help.sap.com/saphelp_sm40/helpdata/EN/d1/489ba9e6a94a508aee01797d06f912/frameset.htm
regards
Andy -
Transaction /n/TMWFLOW/CMSCONF
Hello!
If I execute the Tcode /n/TMWFLOW/CMSCONF I can see the projects created in tcode "SOLAR_PROJECT_ADMIN" but there are red.
Is there some activation steps to do it?
Other issue:
I have SOLMAN 4.0 and can see only two tabs, but not the tabs like "Distribution routes", etc.
Are these tabs only by SOLMAN 3.2?
<b>Is there some configuration guide or .sim-file describing the usage of Change Request Management?</b>
Thank you!
regardsHey Thom,
Issue 1).
In SOLAR_PROJ_ADMIN, the reason you get those red icons because settings which are maintained are not as recemmended by SAP,
For e.g
if you define a Production sytem in your project landscape, then Cross-client changes are NOT permitted, however its permitted if it were a Development system.
Just click on the red icon and then on your right, you will see the tab where you get know what went wrong and correct it if neccssary.
Issue 2)
With Solman 4.0 distribution routes tabs are not present.
There are *.sim files and configuration available for Change request management in sap marketplace, but they are valid only for SOLMAN 3.2.
This is where you get them.
<a href="https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000633637&">https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000633637&</a>
Just click on Techincal or functional roles on your right and there you get everthing.
For SOLMAN 4.0, there are no config guide or SIM files available yet.
Please Reward for usefull post and close this thread if your problem is solved
Regards,
Anand. -
Re: /n/tmwflow/cmsconf - how to find tcode central configuration
Hi gurus,
Iam configuring the ChaRM for this i have done the IMG,TMS all the activities but i can t find the systems in the /tmwflow/cmsconf transaction. The distribution button and the sceduling button are hided ,how to enable it !
solutions awarded for sure!
regards,
esr kumarHey Thom,
Issue 1).
In SOLAR_PROJ_ADMIN, the reason you get those red icons because settings which are maintained are not as recemmended by SAP,
For e.g
if you define a Production sytem in your project landscape, then Cross-client changes are NOT permitted, however its permitted if it were a Development system.
Just click on the red icon and then on your right, you will see the tab where you get know what went wrong and correct it if neccssary.
Issue 2)
With Solman 4.0 distribution routes tabs are not present.
There are *.sim files and configuration available for Change request management in sap marketplace, but they are valid only for SOLMAN 3.2.
This is where you get them.
<a href="https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000633637&">https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000633637&</a>
Just click on Techincal or functional roles on your right and there you get everthing.
For SOLMAN 4.0, there are no config guide or SIM files available yet.
Please Reward for usefull post and close this thread if your problem is solved
Regards,
Anand. -
Re:/tmwflow/cmsconf transaction - scheduling and distribution routes hided
Hi gurus,
Iam configuring the ChaRM for this i have done the IMG,TMS all the activities but i can t find the systems in the /tmwflow/cmsconf transaction. The distribution button and the sceduling button are hided ,how to enable it !
solutions awarded for sure!
regards,
esr kumarHi,
Please kindly ensure that the IMG has been configured correctly especially in the perspective for ChaRM;
SAP Solution Manager
- Advanced Configuration
-Scenario-Specific Settings
-Change Request Management
-Standard Configuration
-Transport Management System
Extended Configuration is for the purpose, if you need to specify
Critical Transport Objects, or Reproting Service. But before coming to
this part, the standard configuration has to be completed and working.
Hope this helps.
Cheers
SH -
/n/TMWFLOW/CMSCONF lists no systems
Hi,
I have configured STMS and other CHARM related activities.
When I execute above tcode, no system is listed for CSOL.
solman7.1SP04
per your experience, what is missing?
Thanks a lot!Hi,
Try to execute report /TMWFLOW/CONFIG_BATCH_GET in se38 and check if you get list of systems in /n/TMWFLOW/CMSCONF .
Regards,
Archana -
We are implementig ChaRM and we have the following situation:
Some domain control are configured in production systems and other in
development systems.
Only the systems that are domain control in development system appear
correctly in /tmwflow/cmsconf transaction and is possible set up
"project assignment" to mandatory. When the domain control is in the
production system is not possible set up this. In change Attribute
definition screen, only productions clients appears.
When we change the domain control to development system, this problem
doesn't occurs.
Is mandatory that domain control to be in development systems? I have
system that is better domain control in production system.Hi,
Do you have a domain link between SOLMAN domain contoller with the other domain controllers?
What does /TMWFLOW/CHARMCHK say?
Feel free to revert back.
--Ragu -
/TMWFLOW/CMSCONF - Unable to see overview of systems
Hi
I am unable to see an overview of systems at /TMWFLOW/CMSCONF.
I have configured the system landscape at SMSY. I have 3 clients in the landscape which I use as DEV, QA and PRD.
At SOLAR_PROJET_ADMIN, I have added these components to teh landscape.
However I am unable to see any "Change Request Management" relevant tabs in the "System landscape" tab here (as some posts in this forum suggest).
Are these two issue related?
Regards
SNHi
Yes I have created the project as "Internal Maintenance Project".
The problems that I see are:
1. I do not see any "Project Cycle" tab in System Landscape tab at SOLAR_PROJECT_ADMIN.
2. At SOLAR_PROJECT_ADMIN-> System Landscape-> Systems: When I check the System Landscape, It says: Logical component ZECCis not used in Project ZPRJ. (However it shows a green light.) At SMSY however I see the project ZPRJ and the logical component assigned to the project with all its systems.
3. /TMWFLOW/CMSCONF is not showing any projects/components. For projects to show up at this transaction I think there are some settings tht I have missed.
Can anyone walk me through the steps that I need to have done in SMSY, DSWP, Transport management etc that can help me see what I have missed? I must have missed some configuration?
Is there any Configuration in SPRO to be done?
Regards
SN -
Error in creating task list /TMWFLOW/PROJCTC
Hello,
We are implementing charm in release 7.1. We are getting an error some times that says that user was not able to create a task list for an urgent correction SMHF.
The error message says:
There is no active task list in the associated project
However we run the charmcheck transaction and no error for the project. Error SOCM_ACTION_LOG014.
Then we got the error saying
"Task list H.xxxxxxxx not created by user mmmmmmmmm
Error writing to table /TMWFLOW/PROJCTC"
Errors are
/TMWFLOW/TASKLIST304
/TMWFLOW/TASKLIST177
When we start testing early in the morning we can create the first ticket with no problem (every day the system is down for backup and then restarted). However, subsequent ticket show this same error.
We checked SLG1, ST22, and SM12 to find any error, however we are not able to find any problem.
We think that problem is that something is blocking, however we are not able to find the error.
Please advice
Many thanks
Javier MandiroalHello all,
We are facing the same issue. While creating ZMHF (custom Urgent Change) users "sometime" receive error "There is no active task list in the associated project"
Hi Mateus , the document is you mentioned is currently expired / unavailable. Can you kindly upload the same again please?
Thanks in advance,
Shaji Narayanan -
Error in background job for program RSGET_SMSY error message No active job
Hello!
I would like to set up the Change Request Management functionality in SAP Solution Manager.
The only red warning by executing Test-button in Tcode SOLAR_ADMIN_PROJECT is:
<b>Error in background job for program RSGET_SMSY error message No active job found</b>
Can someone please tell me how to solve this problem?
(tcodes, technical steps)
Thank you very much!
regards
ThomThank you very much!
Can you also help me with the warning "Errors occurred during synchronization of the system landscape" in tcode SOLAR_PROJECT_ADMIN" --> System landscape --> Change requests --> "Refresh"?
The second issue I cannot see any projects in Tcode "/TMWFLOW/CMSCONF"
according to the SPRO-step "Set Project Assignment of Requests as Mandatory"
Thank you!
regards -
Error while makingProject assignment Mandatory
Hi ,
In /tmwflow/cmsconf, When i try to make the project assignment mandatory, i am getting teh belwo Error. Can anyone help in fixing this issue.
System cancel RFC destination SM_<SID>CLNT000_TRUSTED, Call TMW_CHANGE_PROJECT_SETTING: Screen output without connection to user.
I have wide authorization in solman and Trusted authorization also in satellite system
AnandHi,
I Still guess it could be missing authorization. check for s_rfc and s_rfcacl objects for that user.
Check these links.
Re: "Screen output without connection to user"
http://www.sapnet.ru/abap_docu/ABENRFC_SYS_FAIL.htm
This should help.
Feel free to revert back.
-=-Ragu -
Error whiel activating cross system object lock
Hi ,
when I am trying to activate the cross system object lock functionality for developement system in tcode /TMWFLOW/CMSCONF from our solman system , it showing the following error
'Error RFC destination SM_SMDCLNT000_TRUSTED: You are not authorized to logon to the target system (error code 1).
Message no. /TMWFLOW/TRACK_N106'
In the above RFC connection the 'Current user' is provided.
Can anyone please let me know what I am missing in this?Hi Farzan,
I dont have autorization in Client 000 of SMD system thats why its giving authorization error but when I am trying to activate the object locking for SMD client 321 why the system is trying to logging into the SMD : 000 can we somewhere modify the RFC conection which needs to be used.
Regards,
Amar Kamat
Maybe you are looking for
-
Using multiple UIWebView objects with a Tab Bar Controller.
So, I'm pretty new to this cocoa touch language and seem to be hitting a road block. I have an application that will use a Tab Bar Controller as a navigation. Each tab will display a different UIWebView object that's been linked to their own URL's. I
-
Import data channel after PicLoad
Hi everyone, After loading a TDR file I want to construct a script for loading data channels into the existing axis systems in the report automatically. Maybe the command like "GraphObjNew" doesn't help in this situation. Is there any command that ca
-
TestStand v3.0 for multiple test sequence runs
I am trying to setup the TestStandv3.0 so that it can execute multiple test sequences. Currently it executes one sequence and then rather than reporting the test results in an HTML format, it terminates and the entire tool quits execution. How do I f
-
Missing or blank .exe icon
A similar inquiry was posted in an old post (http://forums.ni.com/ni/board/message?board.id=170&message.id=178926) but does not seem to ever have been answered or solved. I'm running LV 8.6.1 I create and save a custom icon using the Icon Editor in
-
Wireless Signal Weak - Tap into Outside Box Coax Cable and Convert to RJ45 Somehow?
Garage PC is too far away from Verizon Wireless Router MI424WR. The cable from the underground comes in at the garage and is tantalizingly close! Can a 75 ohm video type splitter be installed at the garage and some sort of converter box be installed