/TMWFLOW/CMSCONF - Unable to see overview of systems

Hi
I am unable to see an overview of systems at /TMWFLOW/CMSCONF.
I have configured the system landscape at SMSY. I have 3 clients in the landscape which I use as DEV, QA and PRD.
At SOLAR_PROJET_ADMIN, I have added these components to teh landscape.
However I am unable to see any "Change Request Management" relevant tabs in the "System landscape" tab here (as some posts in this forum suggest).
Are these two issue related?
Regards
SN

Hi
Yes I have created the project as "Internal Maintenance Project".
The problems that I see are:
1. I do not see any "Project Cycle" tab in System Landscape tab at SOLAR_PROJECT_ADMIN.
2. At SOLAR_PROJECT_ADMIN-> System Landscape-> Systems: When I check the System Landscape, It says: Logical component ZECCis not used in Project ZPRJ. (However it shows a green light.) At SMSY however I see the project ZPRJ and the logical component assigned to the project with all its systems.
3. /TMWFLOW/CMSCONF is not showing any projects/components. For projects to show up at this transaction I think there are some settings tht I have missed.
Can anyone walk me through the steps that I need to have done in SMSY, DSWP, Transport management etc that can help me see what I have missed? I must have missed some configuration?
Is there any Configuration in SPRO to be done?
Regards
SN

Similar Messages

Unable to see created File System Repository

Hi,
I have created a File System Repository following the link below:
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
I am not able to do user mapping by going in personalize as I can found my windows System there.
Do I have to create a new system mwhere else.
BTW, I am mapping to a remote window system with the KM.
Please give useful suggestions.
Points given for problem solving answers.
Sumit

Hi,
Example configuration of a WINDOWS® file system repository manager given in the Help.sap.com.
Creating System:
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
Specifying User Mapping:
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
Senthil K.

Transaction /n/TMWFLOW/CMSCONF

Hello!
If I execute the Tcode /n/TMWFLOW/CMSCONF I can see the projects created in tcode "SOLAR_PROJECT_ADMIN" but there are red.
Is there some activation steps to do it?
Other issue:
I have SOLMAN 4.0 and can see only two tabs, but not the tabs like "Distribution routes", etc.
Are these tabs only by SOLMAN 3.2?
<b>Is there some configuration guide or .sim-file describing the usage of Change Request Management?</b>
Thank you!
regards

Hey Thom,
Issue 1).
In SOLAR_PROJ_ADMIN, the reason you get those red icons because settings which are maintained are not as recemmended by SAP,
For e.g
if you define a Production sytem in your project landscape, then Cross-client changes are NOT permitted, however its permitted if it were a Development system.
Just click on the red icon and then on your right, you will see the tab where you get know what went wrong and correct it if neccssary.
Issue 2)
With Solman 4.0 distribution routes tabs are not present.
There are *.sim files and configuration available for Change request management in sap marketplace, but they are valid only for SOLMAN 3.2.
This is where you get them.
<a href="https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000633637&">https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000633637&</a>
Just click on Techincal or functional roles on your right and there you get everthing.
For SOLMAN 4.0, there are no config guide or SIM files available yet.
Please Reward for usefull post and close this thread if your problem is solved
Regards,
Anand.

Systems missing in /TMWFLOW/CMSCONF

Hi Experts,
We have configured ChaRM in solution manager for several landscapes(PI,BI,CRM,SRM..etc). We now want to activate CSOL and unable to see few systems in /TMWFLOW/CMSCONF.
Example my PI Landscape is :T11, A11, P11. i am able to see T11 but not A11 and P11. similar is heh case with BI landscape too.if anybody has encountered this issue and has solution, please help
Appreciate your quick help
Anand

Hi,
You missed some more config steps, pls follow the christian guidlelines as stated below
[Specifying Critical Transport Objects under Change Management Extend config|Specifying Critical Transport Objects under Change Management Extend config]
[No system listed in /TMWFLOW/CMSCONFIG|No system listed in /TMWFLOW/CMSCONFIG]
let us knw once you checked.
Jansi

No systems found in /tmwflow/cmsconf

Hi,
I have included a 4 system landscape DEV -> QAS -> PPR -> PRD in my Maintenance project. Activated Change request Management.
Created Maitenance Cycle.
CTS was configured successfuly.
I could see all green messages in /tmwflow/charmchk
Created Trusted RFCs as well.
But I could not see my system under System Change Options in /tmwflow/cmsconf. Contradicting this, I could see my system under Critical Objects in /tmwflow/cmsconf.
Really wondering what am I missing.
Any pointings will definitely be rewared. Please help.
--Ragu

Hi,
maybe a job is missing.
Try report /TMWFLOW/CONFIG_BATCH_GET to fix this manually or schedule job /TMWFLOW/CONFIG_BATCH_GET
see: http://help.sap.com/saphelp_sm40/helpdata/EN/d1/489ba9e6a94a508aee01797d06f912/frameset.htm
regards
Andy

Unable to see DB13 and ST04 logs in the system.

Hi All,
We are unable to see the DB13 logs in our SAP system. The same is happening while trying to look into the ST04 logs for Database Message Logs. In both the cases we find the same kind of log:
[in DB13 log]************************************************************************
BR252E Function fopen() failed for '/sapdba/sapcheck/cdvxzfrv.aly' at location file_printout-1
BR253E errno 2: No such file or directory
External program terminated with exit code 5
[in ST04 log]*************************************************************************
BR252E Function fopen() failed for '/sapdba/saptrace/background/alert_PIN.log' at location file_printout-1
BR253E errno 2: No such file or directory
External program terminated with exit code 5
SAP is running on Varitas cluster on two different nodes. One node is having SAP services and the another one Oracle services on it. Since the last week when we shifted the Oracle services from one node to another for monthly maintenace work, we are facing this problem.
Our system details are:
SAP 46C (kernel 46D_EXT) 32 bit
SuSe Linux 2.6.5-7 64 bit
Oracle 9.2.0.6.0
Can someone please help me on it.
Anil

Thanks Padmaja/Eric for your reply !!!
File systems are properly mounted and I can see these said files at OS level. Following are the env variable:
USER=dinadm
LOGNAME=dinadm
HOME=/home/dinadm
PATH=/oracle/DIN/920_64/bin:.:/home/dinadm:/usr/sap/DIN/SYS/exe/run:/opt/kde3/bin:/opt/gnome/bin:/usr/games:/home/dinadm/bin:/usr/bin/X11:/usr/bin:/bin:/usr/sbin:/sbin:/usr/lib/java/jre/bin
MAIL=/var/mail/dinadm
SHELL=/bin/tcsh
SSH_CLIENT=10.234.14.33 1364 22
SSH_CONNECTION=10.234.14.33 1364 10.234.13.50 22
SSH_TTY=/dev/pts/0
TERM=xterm
HOSTTYPE=x86_64-linux
VENDOR=suse
OSTYPE=linux
MACHTYPE=x86_64
SHLVL=1
PWD=/usr/sap/trans/data
GROUP=sapsys
HOST=insapr3din01
HOSTNAME=insapr3din01.pdc.in.ap.holcim.net
MANPATH=/usr/share/man:/usr/X11R6/man:/usr/local/man:/opt/gnome/share/man
MINICOM=-c on
INFODIR=/usr/local/info:/usr/share/info:/usr/info
INFOPATH=/usr/local:/opt/gnome:/usr
LESS=-M -I
LESSOPEN=lessopen.sh %s
LESSCLOSE=lessclose.sh %s %s
LESSKEY=/etc/lesskey.bin
PAGER=/usr/bin/less
MORE=-sl
GZIP=-9
CSHEDIT=emacs
COLORTERM=1
NNTPSERVER=news
XFILESEARCHPATH=/usr/lib/X11/%L/%T/%N%C:/usr/lib/X11/%l/%T/%N%C:/usr/lib/X11/%T/%N%C:/usr/lib/X11/%L/%T/%N:/usr/lib/X11/%l/%T/%N:/usr/lib/X11/%T/%N:/var/X11R6/%T/%N%C:/var/X11R6/%T/%N
INPUTRC=/etc/inputrc
LANG=en_US.UTF-8
QTDIR=/usr/lib/qt3
no_proxy=localhost
WINDOWMANAGER=/usr/X11R6/bin/kde
JAVA_BINDIR=/usr/lib/java/jre/bin
JAVA_ROOT=/usr/lib/java
JAVA_HOME=/usr/lib/java/jre
JRE_HOME=/usr/lib/java/jre
CVS_RSH=ssh
G_BROKEN_FILENAMES=1
GNOME_PATH=/opt/gnome:/usr
GNOMEDIR=/opt/gnome
ACLOCAL_PATH=/opt/gnome/share/aclocal
PKG_CONFIG_PATH=/opt/gnome/lib/pkgconfig
GTK_PATH=/usr/local/lib64/gtk-2.0:/opt/gnome/lib64/gtk-2.0:/usr/lib64/gtk-2.0
MODULE_VERSION=3.1.6
MODULE_VERSION_STACK=3.1.6
MODULESHOME=/usr/share/modules
MODULEPATH=/usr/share/modules/versions:/usr/share/modules/modulefiles
LOADEDMODULES=
CSHRCREAD=true
LS_OPTIONS=-N --color=tty -T 0
SAPSYSTEMNAME=DIN
DIR_LIBRARY=/usr/sap/DIN/SYS/exe/run
LD_LIBRARY_PATH=/usr/sap/DIN/SYS/exe/run:/oracle/client/92x_32/lib
THREAD=NOPS
dbms_type=ORA
dbs_ora_tnsname=DIN
dbs_ora_schema=SAPR3
ORACLE_PSRV=DIN
ORACLE_SID=DIN
ORACLE_HOME=/oracle/DIN/920_64
ORACLE_BASE=/oracle
ORA_NLS=/oracle/DIN/920_64/ocommon/NLS_723/admin/data
ORA_NLS32=/oracle/DIN/920_64/ocommon/NLS_733/admin/data
ORA_NLS33=/oracle/client/92x_32/ocommon/nls/admin/data
NLS_LANG=AMERICAN_AMERICA.WE8DEC
SAPDATA_HOME=/sapdata/oracle/DIN
waiting for your reply,
Anil

I am unable to see business systems in ID

Hi Experts,
I have created Technical and business systems in SLD,
I have done mapping every thing working fine but when go to integration directory
i am unable assign business systems, i didn't find my busuiness systems in ID.
Can u please tell me where i have done wrong.
Thanks in addvance.
Manisha.

Hi Manisha,
There is a simple solution for this problem,
1. If you use the same business system to map more than one scenario U can't see the Business system in the ID directly.i.e., at assign business systems in ID.
2. Go to next tab which is Objects (ID) there you can see all the business systems which are using by XI server please do like this to get the business system.
3 select the business system which u want to work on- right click and select add to acenario(current ID scenario)
4. come out of that tab then u can see the business system added to the scenario. then rest is normal.
hope you understand
regards
praveen

Par file customization (Am unable to see .par files in System Admin)

Hi,
Am unable to see any of .par files in system administration->support-->portal runtime-Browse Deployment
can any one help me.
Thanks in advance.

Hi Mahesh,
Please check at System Administration >> Support >> Portal Content >> Administration Console >> Archive Deployment Checker >> Look for your deployed PAR file here.
Hope it will helps
Regards
Arun Jaiswal

Unable to see system variable no in sap b1 due to watch

Dear Sir,
In SAP B1
I am generating report Customer Aging Report.
In PLD Customer Code is displaying buy i am unable to display customer name in PLD because when i am unable to see
system variable number.
The watch cover that variable no. how can i find system variable no.
is there any other method to see system variable no.

Hi,
what you are seeing in system-> status is not the installation number that is the status of your system's SAP License
when you have not installed the license properly after the installation, it shows the status as initial
go to SM51
there you can find the instance number along with the Hostname_SID_InstNumber of your server
thanks and regards
Abdul Hadi

/n/TMWFLOW/CMSCONF lists no systems

Hi,
I have configured STMS and other CHARM related activities.
When I execute above tcode, no system is listed for CSOL.
solman7.1SP04
per your experience, what is missing?
Thanks a lot!

Hi,
Try to execute report /TMWFLOW/CONFIG_BATCH_GET in se38 and check if you get list of systems in /n/TMWFLOW/CMSCONF .
Regards,
Archana

Tab missing in Transaction /n/TMWFLOW/CMSCONF

We have upgraded our SMR 3.2 to SMR 4.0, in SMR 3.2 i can able to see the tab named "Distribution Routes" using /TMWFLOW/CMSCONF transaction.when i used the same t-code SMR 4.0 , i can only able to see System Change Options and Critical objects,Other tabs are not in visible mode ??? how can we retrive the same tab . or else is there any other t-code for Distribution routes ???? guide me ..
im struck up while following the SPRO settings in ChaRM.Send me is there any step by step weblogs are available ???

Hi Prakash,
If you are trying to create project cycles with /TMWFLOW/CMSCONF-> Distribution Routes-> Project environment, go to SOLAR_PROJECT_ADMIN -> System landscape-> Project cycles. With Release 4.0, some functions that existed in 3.20 outside of the original tools of the Solution Manager have been reintroduced.
If you need to go to Transport Domains and to navigate to TMS system configuration, go to Transaction SMSY-> Environment -> Domain Controller Overview.
If you need this tab for other function, let us know.
Regards,
Raquel Cunha.

Re: /n/tmwflow/cmsconf - how to find tcode central configuration

Hi gurus,
Iam configuring the ChaRM for this i have done the IMG,TMS all the activities but i can t find the systems in the /tmwflow/cmsconf transaction. The distribution button and the sceduling button are hided ,how to enable it !
solutions awarded for sure!
regards,
esr kumar

Hey Thom,
Issue 1).
In SOLAR_PROJ_ADMIN, the reason you get those red icons because settings which are maintained are not as recemmended by SAP,
For e.g
if you define a Production sytem in your project landscape, then Cross-client changes are NOT permitted, however its permitted if it were a Development system.
Just click on the red icon and then on your right, you will see the tab where you get know what went wrong and correct it if neccssary.
Issue 2)
With Solman 4.0 distribution routes tabs are not present.
There are *.sim files and configuration available for Change request management in sap marketplace, but they are valid only for SOLMAN 3.2.
This is where you get them.
<a href="https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000633637&">https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000633637&</a>
Just click on Techincal or functional roles on your right and there you get everthing.
For SOLMAN 4.0, there are no config guide or SIM files available yet.
Please Reward for usefull post and close this thread if your problem is solved
Regards,
Anand.

Unable to see interface on ASA 5510 Firewall

Hi All,
I am unable to see 4th interface on my firewall i.e fastether0/3 on my firewall ASA 5510.
Below is the output.
ciscoasa# sh int ip br
Interface                  IP-Address      OK? Method Status                Protocol
Ethernet0/0                x.x.x.x           YES CONFIG up                    up
Ethernet0/1                x.x.x.x           YES CONFIG up                    up
Ethernet0/2                unassigned      YES unset administratively down down
Internal-Control0/0        127.0.1.1       YES unset up                    up
Internal-Data0/0           unassigned      YES unset up                    up
Management0/0              192.168.1.1     YES CONFIG up                    up
Please suggest what could be the reason.
Regards
Pankaj

Hi Ramraj,
Even i have the base license for my ASA 5510 which is showing all the 4 interfaces in sh ver. I don't think so license would be an issue. There should be some IOS code bug that needs to be upgraded. If this goes for an OS upgrade it should get resolved.
Its not showing up in sh ver . As Karsten said he might be running on old IOS version.
fy-a# sh ver
Cisco Adaptive Security Appliance Software Version 8.4(4)1
Device Manager Version 6.4(5)
Compiled on Thu 14-Jun-12 11:20 by builders
System image file is "disk0:/asa844-1-k8.bin"
Config file at boot was "startup-config"
fy-a up 1 day 1 hour
Hardware:   ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW016 @ 0xfff00000, 2048KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                             Boot microcode   : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode : CNlite-MC-IPSECm-MAIN-2.06
                             Number of accelerators: 1
0: Ext: Ethernet0/0         : address is 2c54.2d0c.8f1a, irq 9
1: Ext: Ethernet0/1         : address is 2c54.2d0c.8f1b, irq 9
2: Ext: Ethernet0/2         : address is 2c54.2d0c.8f1c, irq 9
3: Ext: Ethernet0/3         : address is 2c54.2d0c.8f1d, irq 9
4: Ext: Management0/0       : address is 2c54.2d0c.8f1e, irq 11
5: Int: Not used            : irq 11
6: Int: Not used            : irq 5
Licensed features for this platform:
Maximum Physical Interfaces       : Unlimited      perpetual
Maximum VLANs                     : 50             perpetual
Inside Hosts                      : Unlimited      perpetual
Failover                          : Disabled       perpetual
VPN-DES                           : Enabled        perpetual
VPN-3DES-AES                      : Enabled        perpetual
Security Contexts                 : 0              perpetual
GTP/GPRS                          : Disabled       perpetual
AnyConnect Premium Peers          : 2              perpetual
AnyConnect Essentials             : Disabled       perpetual
Other VPN Peers                   : 250            perpetual
Total VPN Peers                   : 250            perpetual
Shared License                    : Disabled       perpetual
AnyConnect for Mobile             : Disabled       perpetual
AnyConnect for Cisco VPN Phone    : Disabled       perpetual
Advanced Endpoint Assessment      : Disabled       perpetual
UC Phone Proxy Sessions           : 2              perpetual
Total UC Proxy Sessions           : 2              perpetual
Botnet Traffic Filter             : Disabled       perpetual
Intercompany Media Engine         : Disabled       perpetual
This platform has a Base license.
Serial Number: JMX1AXXXXX
Running Permanent Activation Key: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Configuration register is 0x1
Configuration has not been modified since last system restart.
fy-a#
Ramraj please do correct me if am wrong.
Please do rate if the given information helps.
By
Karthik

Unable to see pipe line steps in the SXMB_MONI

HI,
i have done the development and quality work for my p i7.1
i was testing the messages in the Quality System.
So i went to SXMB_MONI to see the messages.
After double clicking on the successfully processed message, it shows
pipe line steps.
in that I am able to see
1.inbound message(CENTRAL)
2.XML Validation inbound channel Request
3. call adapter
4. Response
but i am unable to see
1. Receiver Determination
2. Interface Determination
3. Receiver Grouping
4. Request Message Mapping
5. Technical Routing
whereas in the develoment system i am able to see the above all.
is there any configuration i have to do in the SXMB_ADM?

can i know that Configuration objects were created/ imported by using transport mechanisum?
if created ,
check the cache status and re activated those objects whatever u r posted in thread.
if transported :
u ll follow ,whatever posted by Earlier

Unable to see data in Table in smartform

Hi all,
I need to create a smartform where I have to print the header details at the start and then below that details for all line items for a particular document.
so i have data ;ike :
Header data :
field 1 : field 2:
Field3 : field4:
field5: field6:
Item data :
field1 field2 field3 field4 --> Item 1
field1 field2 field3 field4 -->Item 2
field 1 field2 field3 field4 -->Item3
For the Header data,Im planning to use a template in a secondary window.
However for the item data,i need to use a table (As i know the no of records only at runtime).Also another reason for usng table would be that I dont need the header on each flloowing page but only the Line item details on the following pages.
Now my ques is :
1.I hav ecreated the form and put some constant /texts to just test the form.I am able to see the texts/data in the header data.However Im unable to see the data for the Item i.e. in the TABLE.
I have used template for Header details which I can see.
I dont know what Im doing wrong.Is it because in the DATA tab under TABLES,I have given an interna table but there is no data in the table?
I have defined only 1 line type in my table an dthat has 4 cells (as I need to print 4 item fields under the Item data)
PLease let me know what I am doig wrong because of which Im unable to see the item data in table form.
Thanks!

Hi,
Have you used any exists?
in exists is there any system date kind?
Can you try to run your report thru RSRT and use debug option there.
before reporting please check your all connected targets have data for reporting.
mean at targets-->request tab, reporting symbol was there or not.
Any master data objects included in multi provider?
if yes then please check those, if any ACR was running then it may cause you.
if possible try to develop simple query with as per needs(mean to see 2015 data only).
As my guess selections/filters migth be hidden, please check those.
Thanks

/TMWFLOW/CMSCONF - Unable to see overview of systems

Similar Messages

Maybe you are looking for