TNAPR vs NACE
Folks,
what is the relation between these two?
If we find an output type,driver prog and std script in TNAPR,does the same shud exist in NACE also?
In my issue there is an output type like that, which does exist in TNAPR and not in NACE...is that possible?
If so if wanna to appear that in NACE under V3 do i add that entry to NACE?
I welcome all your suggestions on this issue, as i have to solve the above..
Thanks in advance.
Regards,
Raja.
Hi,
1.Shall i add that in NACE , is that OK?
<b> Output types are added basically by BASIS people
contact ur basis .</b>2.actually my user want to test a document format for a paritcular output type (FETR). So if i maintain that output type in NACE, is that enough to test him for that docu format?
<b>Yes maintain FETR entry in Nace for form layout.</b>
3.If not ...what else i have to do to make that output available for him?
<b> Above configuration will work.</b>
Please have a talk to your basis guys also.
Regards
Amole
Similar Messages
-
What is the meaning of output type in NACE ?
Check out these threads on NACE
SAP Script - NACE
TNAPR vs NACE
Condition records in NACE?
NACE is used to create output type while creating the output type you will mention forms, and driver program.
that will be maintained in the table TNAPR.if you create the output type using NACE then it will be automatically visible in table NAST and TNAPR.
so check in NAST, TNAPR table
Output types are added basically by BASIS people
contact ur basis
Output types are represent how you want to output information. In SAP Script context it links the print program with SAP script. Output types are part of Output determination procedure which is linked to the application (e.g. Purchsing). Output types are also linked to Access sequence, which allows you to create condition records so that output types can be processed automatically.
http://help.sap.com/saphelp_nw04/helpdata/en/c8/19884743b111d1896f0000e8322d00/frameset.htm
By using NACE transaction we will assign Sap script and driver program to O/P type in an aplication for different mediums (like print/fax , mail) .
Example :
NACE--> Application EA --> means for PO > check O/P "NEU" (SAP standard)> Medium "Print" --> You can find the Driver program and Sap script associated to it.
If you have your Own o/p, Script and program. Then you will assign the by using T/code NACE. Then this will appear when you want to print PO or other.
NACE transaction
In this transaction you can attached your Form ad your driver program .
As you know you have got a Form say ZForm
and a driver program say ZDriver.
In NACE you assign an output type say ZOUT in which you attached these two so that you can identify which form is attached to which layout (Very important steps).
**how otput typpe will help you
say in the transaction say IW32 , if you want to hava a preview of ur output , then it will ask for ur output type . then u can select ur output type ZOUT which u had created in NACE transaction and then u will be able to view ur layout preview.
Few tables are also important in thisaspect.
TNAPR
**where can we get the print program for that exising form
Say if ur using any standar transaction then u can go to
System --> status
there you can find the driver of print program -
i want to send purchase order data from sap toxi ..how to configure output types in nace transaction
Hii Chandra
NACE is used to create output type while creating the output type you will mention forms, and driver program.
that will be maintained in the table TNAPR.if you create the output type using NACE then it will be automatically visible in table NAST and TNAPR.
so check in NAST, TNAPR table
Output types are added basically by BASIS people
contact ur basis team
Output types are represent how you want to output information. In SAP Script context it links the print program with SAP script. Output types are part of Output determination procedure which is linked to the application (e.g. Purchsing). Output types are also linked to Access sequence, which allows you to create condition records so that output types can be processed automatically.
http://help.sap.com/saphelp_nw04/helpdata/en/c8/19884743b111d1896f0000e8322d00/frameset.htm
By using NACE transaction we will assign Sap script and driver program to O/P type in an aplication for different mediums (like print/fax , mail) .
Example :
NACE--> Application EA --> means for PO > check O/P "NEU" (SAP standard)> Medium "Print" --> You can find the Driver program and Sap script associated to it.
If you have your Own o/p, Script and program. Then you will assign the by using T/code NACE. Then this will appear when you want to print PO or other.
it is from the link
Re: about NACE and output types
also chk this links
<b>SAP Script - NACE
TNAPR vs NACE
Condition records in NACE?
Reward points if helpful
Regards
Naresh -
Hi all,
I need to send the smartform through e-mail to the supplier,
i have the code to send it in mail,
1) now where do i put that code in print program,
how does a print program work?
2) how do i configure the processing routine for the same output type?
my output type is NEU, i need to have 3 mediums for this printer, fax and mail,
how do i control it?
Thanks in advance.Hi,
1. The code for sending mail should be written after the function module of smartform is called.
2. Output types can be configured in NACE transaction
NACE is used to create output type while creating the output type you will mention forms, and driver program.
that will be maintained in the table TNAPR.if you create the output type using NACE then it will be automatically visible in table NAST and TNAPR.
so check in NAST, TNAPR table
Output types are added basically by BASIS people
contact ur basis team
Output types are represent how you want to output information. In SAP Script context it links the print program with SAP script. Output types are part of Output determination procedure which is linked to the application (e.g. Purchsing). Output types are also linked to Access sequence, which allows you to create condition records so that output types can be processed automatically.
http://help.sap.com/saphelp_nw04/helpdata/en/c8/19884743b111d1896f0000e8322d00/frameset.htm
By using NACE transaction we will assign Sap script and driver program to O/P type in an aplication for different mediums (like print/fax , mail) .
Example :
NACE--> Application EA --> means for PO > check O/P "NEU" (SAP standard)> Medium "Print" --> You can find the Driver program and Sap script associated to it.
If you have your Own o/p, Script and program. Then you will assign the by using T/code NACE. Then this will appear when you want to print PO or other.
it is from the link
Re: about NACE and output types
also chk this links
SAP Script - NACE
TNAPR vs NACE
Condition records in NACE?
<b>Reward if helpful.</b> -
How to find Driver program for an Particular Script Excluding TNAPR, NACE
Hi Friends,
I had an problem now, that I need to find the driver program for Dunning 'F150' which I already checked in TNAPR table and NACE transaction code, but I couldn't find any desired results on this search. Kindly can anybody suggest me for getting out of it as I need to make some changes over the driver program. Your help is mostly appreciated.
Thanks in Advance,
Murali.hi,
try this.
goto se71 transaction.give your form name click display.in menu goto form - check -texts and press enter.
you will get all the print programs used for that script. -
Difference between NACE and TNAPR
hi gurus
can anyone suggest me
what is NACE transaction
what is TNAPR
difference between thse two..
thank you
regards
kals.NACE is the Tcode used to link the Application type, Output Types and its processing Routines like ( Driver programs and attached Script forms or Smartforms).
You should know the Application of a document first Like:
for PO it is EF, for sales Doc's it is V1, for Delivery docs it is V2, for billing Doc's it is V3 etc.
so first select the Application type (ex: EF) for PO and press OUtput types
then a list will come in that you should know the related output type for PO.
in this case it is NEU,
select that and click on the processing Routines button on the left side
it will display the Medium, Driver Program and the Script form or smartform related to that document..
All nace entries are stored in TNAPR table
1. In simple words, it
is used for printing documents eg. purchase order, sales order etc.
2. eg.
For company1, there is purchase order A,
for company2, there is purchase order B,
for purchasing organisation 3, there is purchase order C.
Now, this type of MAPPING (which is totally dynamic and changeable)
cannot be HARDCODED in the standard sap program.
3. Hence, NACE,
provides this facility to MAP
as per users requirement.
ie. We can determine the OUTPUT using NACE.
Output means for eg. Printing of purchase order
Determine means = dynamically detecting which output (PO eg)
hence, it is also called OUTPUT DETERMINATION using NACE.
In NACE transaction, We will assign the Form name and the driver program name and the corresponding routine to be triggered in the driver program.
We should be able to tell the system to pick up the desired form layout and trigger the routine and get the data from the database and put it on to the form. All these stuff the system will come to know from the NACE settings.
NACE is used to create output type while creating the output type you will mention forms, and driver program.
that will be maintained in the table TNAPR.if you create the output type using NACE then it will be automatically visible in table NAST and TNAPR.
so check in NAST, TNAPR table
You can view all forms and driver programs for standard SAP Scripts.
Assigning Form and Driver proram to an Output type is as follows.
1) Go to NACE transaction
2) Select an Applicatin(V1-Sales,V2-Shipping,V3-Billing)
3) Click on Outputtypes Button
4) Comes to Change Mode
5) Click on New Entries button
6) Specify Output type,Form name and Program and Save it.
Check these links
/people/venkata.ramisetti/blog/2006/09/21/configuring-output-types-for-pdf-based-print-forms
http://help.sap.com/saphelp_erp2005/helpdata/en/c8/1989fe43b111d1896f0000e8322d00/frameset.htm
Condition records in NACE?
NACE is the transaction code where you can maintain the output types for the applications...
NACE - Initial Customizing Screen
where your going to attach the layout which u have designed to the particular output type - Specifies the kind of output to be produced.
The output type can specify, for example, a printed form that you need for internal use or a form that you want to send to a customer or vendor (for example, an order confirmation). The output type can also be an internal electronic mail message that you want to send to staff in another department.
print program - If you want to inform a partner about changes to output that was already issued, you enter the name of a program and a routine in the Form routine field.
The routine in the program checks which changes should result in a changed output being sent.
Have a look at below link:
http://help.sap.com/saphelp_erp2005/helpdata/en/c8/1989fe43b111d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/198a1843b111d1896f0000e8322d00/frameset.htm
Regards.
Chandru -
OUTPUT CUSTOMISING: TNAPR-NACHA empty
Dear all,
I have customised a new Output attached to sales document header:
When doing unit test I get error following error when trying to priint.
Processing program missing for output ZIRP (medium 1)
Message no. VN020
Diagnosis
No processing program is defined in table TNAPR for output type ZIRP (transmission medium 1) in application V1.
System Response
This output cannot be entered.
Procedure
In Customizing, enter a processing program for output type ZIRP and transmission medium 1.
Now:
1. I see that TNAPR-NACHA is empty and filled in the rest of the outputs.
2. VN_T685B-NACHA is filled correctly
3. Transaction VP01 has a valid condition record
4. Transaction VV12 filled correctly.
Can someone tell me why TNAPR-NACHA is empty?
This looks like being the source of the issue.
Thanks!Hi,
Go to tcode NACE, and selection application V1 and for your output type in Default values..please chose a relevant value from the dropdown tranmission medium and save it.
Re-create the document and test it.
Regards
RS. -
List of script and smart forms(except TNAPR) with output type or print prog
How to find out List of SAP SCRIPT and SMART FORMS (except TNAPR)with output type or print program..I like to chk in output type WMTA whch form should use.kindly help on this
Hi
WMTA is special msg and doesn't create any print: so you can't find a sapscript or smartform to link to it.
WMTA is a message for delivery, so you can find it by NACE trx or TNAPR table (It's the same): infact here it can find only all messages of logistic modules (SD & MM).
The routine ENTRY of RLAUTA20 is called by WMTA and creates a Transfer Order (for WM, Warehouse Management, module), so if you need to create a print for that msg you need to change prg RLAUTA20,
Max -
hi gurus
can u tell me the use of t code NACE in sap script
rgds
mojibhi,
NACE
You can track the form and the print program used for that form
The Tcode NACE is used to link the Standard SAP forms (SCRIPTFORM or SMARTFORM) or the customized form or the new form to its respective print programs. Also the output types, Form entry are linked with their forms and print programs. In short term, i can tell u that configuration or customization of forms to print programs, assigning output types, form entry to the forms are done using this Tcode.
NACE is used to create output type while creating the output type you will mention forms, and driver program.
that will be maintained in the table TNAPR.if you create the output type using NACE then it will be automatically visible in table NAST and TNAPR.
so check in NAST, TNAPR table
http://help.sap.com/saphelp_erp2005/helpdata/en/c8/1989fe43b111d1896f0000e8322d00/frameset.htm
Condition records in NACE?
and
NACE is used for message control customizing.
Take a look at the following link
http://help.sap.com/saphelp_nw04/helpdata/en/c8/198a1843b111d1896f0000e8322d00/frameset.htm
and also
NACE is used for message control customizing.
Take a look at the following link
http://help.sap.com/saphelp_nw04/helpdata/en/c8/198a1843b111d1896f0000e8322d00/frameset.htm
Hope this helps, Do reward. -
Whats the use of PARTNER FUNCTIONS node in NACE transaction
hello
i would like to know when a output type is selected as medium EDI or ALE what needs to be entered in the PARTNER FUNCTIONS node and what is the main purpose of this node. Pls help
~SureshHi Suresh,
Partner Functions Uses
You use partner functions in transactions, in all areas of partner processing and in some areas of business partner master data.
· For example, you have a real estate business and define the function tenant to refer to your customers.
· Tenant is then displayed in the header and Partner tab page in transactions, and on the Buying Center tab page, when relevant.
· It appears in the Customizing settings for access sequences, partner determination procedures and partner teams
· It appears in business partner master data when you assign partners to partner functions as part of maintaining sales area-specific data, and when you enter excluded partner functions.
Nace Transaction
The Tcode NACE is used to link the Standard SAP forms (SCRIPTFORM or SMARTFORM) or the customized form or the new form to its respective print programs. Also the output types, Form entry are linked with their forms and print programs. In short term, i can tell u that configuration or customization of forms to print programs, assigning output types, form entry to the forms are done using this Tcode.
NACE is used to create output type while creating the output type you will mention forms, and driver program.
that will be maintained in the table TNAPR.if you create the output type using NACE then it will be automatically visible in table NAST and TNAPR.
so check in NAST, TNAPR table
Reward if useful.
Thankyou,
Regards. -
Hi,
Sorry for the question but i'm new to adobe forms.
I've created a adobe forms report to replace an existing Purchase Order SAP Script report.
Now i need to "attach" it to the ME22N, ME23N transactions.
I know i have to do this is NACE, what i don't know is how to do it... I guess i need to create a program, but i don't know what code to wirte or how i'm going to pass the PO number parameter from the transaction to the report.
Can anyone help me?
Thanks
Hugohi vishal,
inside form endform i written code like this
FORM ENTRY USING RETCODE XSCREEN.
TABLES:NAST,
TNAPR.
DATA:L_EBELN TYPE EBELN.
DATA:L_FONAME TYPE TDSFNAME,
FM_NAME TYPE RS38L_FNAM.
XSCREEN = US_SCREEN.
L_EBELN = NAST-OBJKY.
SELECT EBELN BUKRS AEDAT ERNAM FROM EKKO INTO TABLE T_FINAL WHERE EBELN = L_EBELN.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZSAPLE_FORM'
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
* EXCEPTIONS
* NO_FORM = 1
* NO_FUNCTION_MODULE = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION FM_NAME
TABLES
T_FINAL = T_FINAL.
ENDFORM. -
how to attach a program in output types of nace (i.e) simple mail
Hi Aswini,
If you have your Own o/p program , Script and program, then you will assign this by using the transaction code: NACE. Then this thing will appear when you want to print Purchase order or other.
Mainly, NACE is used to create o/p type. So, while creating the output type you will mention forms, and driver program.
Those will be maintained in the table TNAPR. If you create the output type using NACE then it will be automatically visible in table NAST and TNAPR.
With the help of NACE transaction, we can assign assign Sap script and driver program to O/P type in an aplication for different mediums (like print/fax , mail) .
For an example:
NACE--> Application EA --> means for PO > check O/P "NEU" (SAP standard)> Medium "Print" --> You can find the Driver program and Sap script associated to it.
Output types are basically added by the BASIS team.
Output types are part of Output determination procedure which is linked to the application (e.g. Purchsing). Output types represents how you want to output the information. In SAP Script context it links the print program with SAP script. Output types are also linked to Access sequence, which allows you to create condition records so that output types can be processed automatically.
For more information on output type, You can view the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/c8/19884743b111d1896f0000e8322d00/frameset.htm.
Hope this will help you...... -
How to assign scripts in nace?
what is the use of nace?
Hi,
In NACE transaction, We will assign the Form name and the driver program name and the corresponding routine to be triggered in the driver program.
We should be able to tell the system to pick up the desired form layout and trigger the routine and get the data from the database and put it on to the form. All these stuff the system will come to know from the NACE settings.
NACE is used to create output type while creating the output type you will mention forms, and driver program.
that will be maintained in the table TNAPR.if you create the output type using NACE then it will be automatically visible in table NAST and TNAPR.
so check in NAST, TNAPR table
You can view all forms and driver programs for standard SAP Scripts.
Assigning Form and Driver proram to an Output type is as follows.
1) Go to NACE transaction
2) Select an Applicatin(V1-Sales,V2-Shipping,V3-Billing)
3) Click on Outputtypes Button
4) Comes to Change Mode
5) Click on New Entries button
6) Specify Output type,Form name and Program and Save it.
Regards,
Priyanka.
http://help.sap.com/saphelp_erp2005/helpdata/en/c8/1989fe43b111d1896f0000e8322d00/frameset.htm
Condition records in NACE? -
TNAPR:We use this table to findout which sapscript uses which driver program.
Does this table holds all sapscripts information(which we do) or only default sapscripts.I tried finding my sapscript,but it says no values.Why?
Anything similar for Smartforms?
Thank youHi Gopi,
No it is not always the case, TNAPR holds the value as per what has been customized inside tcode NACE, for many modules like MM, SD output types are requried, output types are nothing but assignment of script or smartform + print program and each output type has different sap script or smartform in use as per the functional requirements.
TNAPR only holds value for those script and smartform + print program for which output types have been defined.
The one that you are trying to look the entry for inside TNAPR it may belong to finance or controlling or QM areas and scripts which belong to these are not there inside TNAPR, they work on direct printing methods.
Thanks,
Mark -
Hi Friends,
Can any one explain me what is condition records in nace and what is its use ? and what is form routine and what is its use.
Kindly explain.
Regards,
DVNSIn NACE transaction, We will assign the Form name and the driver program name and the corresponding routine to be triggered in the driver program.
We should be able to tell the system to pick up the desired form layout and trigger the routine and get the data from the database and put it on to the form. All these stuff the system will come to know from the NACE settings.
NACE is used to create output type while creating the output type you will mention forms, and driver program.
that will be maintained in the table TNAPR.if you create the output type using NACE then it will be automatically visible in table NAST and TNAPR.
so check in NAST, TNAPR table
You can view all forms and driver programs for standard SAP Scripts.
Assigning Form and Driver proram to an Output type is as follows.
1) Go to NACE transaction
2) Select an Applicatin(V1-Sales,V2-Shipping,V3-Billing)
3) Click on Outputtypes Button
4) Comes to Change Mode
5) Click on New Entries button
6) Specify Output type,Form name and Program and Save it.
Check these links
/people/venkata.ramisetti/blog/2006/09/21/configuring-output-types-for-pdf-based-print-forms
http://help.sap.com/saphelp_erp2005/helpdata/en/c8/1989fe43b111d1896f0000e8322d00/frameset.htm
Condition records in NACE?
Regards,
Maybe you are looking for
-
System will not fully boot to display desktop
I HAVE A IMAC MID 2007 INTEL CHIP 2GIG RAM 250 HD, PROBLEM STARTED A FEW DAYS AGO WHEN I WAS UNABLE TO LOGIN INTO MY USER ACCOUNT, OTHER USERS WERE ABLE, CHATING WITH APPLE I DID EVERYTHING POSSIBLE, CHANGED PASSWORD, RESET, NVRAM,, SAFE MODE, NOTHI
-
Vendor Confirmation on a PO in creation mode.
Hi , We have a requirement in our project such that we need to put the vendor confirmation on a PO in the creation mode of PO ( ME21N / ME59 ). Is it possible in standard SAP ? As per my analysis , the Confirmation can come on a PO only after it has
-
ADF Swing Search form based on readonly VO
Hello, Does somebody know how to use the JUNavigationBar search form, when it is binded to ViewObject, that is readonly? The problem is that the form begins readonly too... Thanks, Jordan
-
Workflow hanging - ST22 and SWU2 empty
Hi all, Some of my workflows are regularly hanging (i.e. background task stuck in status "In process"). This happens on a random basis, and the only way to continue them is via SWPC. When I look at short dumps in ST22 or at tRFC in SWU2 I do not see
-
Discussion Forum Portlets - Anyone using in Production?
This is a followup to another post. Is anyone using the sample Discussion Forum and Discussion Forum Admin portlets provided in WebLogic Portal 8.1 in a production environment? I've already received feedback from one person who had difficulties and d