TNS-01150: The address of the specified listener name is incorrect
hi
I am trying to connect to sql server using oracle.
using http://www.dbasupport.com/oracle/ora10g/connection02.shtml
this link.
but i am getting this error like
C:\Documents and Settings\umesh>lsnrctl start listener1
LSNRCTL for 32-bit Windows: Version 10.1.0.2.0 - Production on 20-MAR-2008 05:58:09
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.1.0.2.0 - Production
System parameter file is E:\oracle\product\10.1.0\Db_1\network\admin\listener.ora
Log messages written to E:\oracle\product\10.1.0\Db_1\network\log\listener1.log
Error listening on: (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.103)(PORT=1522))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
Listener failed to start. See the error message(s) above...
my entries in initdata.ora
are like
# This is a sample agent init file that contains the HS parameters that are
# needed for an OLEDB Agent.
# HS init parameters
HS_FDS_CONNECT_INFO =data
HS_FDS_TRACE_LEVEL =off
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
my entries in listener.ora file is
LISTENER1 =
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.103)(PORT=1522))
(ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))
SID_LIST_LISTENER1=
(SID_LIST=
(SID_DESC=
(SID_NAME=data)
(ORACLE_HOME = E:\oracle\product\10.1.0\Db_1)
(PROGRAM=hsodbc)
my entries in tnsname.ora.ora file is
data =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.103)(PORT=1522))
(CONNECT_DATA=(SID = data))
(HS=OK)
)as give in the documentation in the link every thing work fine.
except when i start the listener.
thanks.
As usual, you probably followed this algorithm
1) gets an error
2) doesn't read error
3) copy of error screen
4) visit this forum
5) paste of error screen
Where the first two errror messages should be descriptive.
They are so descriptive, this is conclusive proof you didn't read them.
I'll repeat them here
Error listening on: (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.103)(PORT=1522))
TNS-12545: Connect failed because target host or object does not exist
Questions:
Did you try to ping 192.168.1.103?
If so, what was the result?
Did you try to telnet into port 1522?
If not so: why did you post this without makint any effort yourself?
Sybrand Bakker
Senior Oracle DBA
Similar Messages
-
TNS-01150: The address of the specified listener name is incorrect TNS-011
Hi Gurus,
Good day!
I would like to seek your expertise on how to resolve the errors below:
TNS-01150: The address of the specified listener name is incorrect
TNS-01153: Failed to process string: (ADDRESS=(COMMUNITY=sap.world)(PROTOCOL=TCP)(Host=155.125.167.74)(Port=1521))
Here's my listener.ora configuration:
LISTENER =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = 155.125.167.74)
(PORT = 1521)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 0
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = L50)
(ORACLE_HOME = /oracle/L50/102_64)
Appreciate your help.
Cheers,
VirgilioSQL NET files has own stream format:
bash-2.05$ cat listener.ora
# listener.ora Network Configuration File: /u01/app/ora10g/product/10.2.0/Db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER10G =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = MYHOST)(PORT = 1523))
(ADDRESS = (PROTOCOL = IPC)(KEY = extproc32))
)But if I change format as below:
LISTENER10G =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = MYHOST)(PORT = 1523))
(ADDRESS = (PROTOCOL = IPC)(KEY = extproc32))
)bash-2.05$ lsnrctl start LISTENER10g
LSNRCTL for Solaris: Version 10.2.0.4.0 - Production on 02-APR-2010 14:46:28
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting /u01/app/ora10g/product/10.2.0/Db_1/bin/tnslsnr: please wait...
TNSLSNR for Solaris: Version 10.2.0.4.0 - Production
System parameter file is /u01/app/ora10g/product/10.2.0/Db_1/network/admin/listener.ora
Log messages written to /u01/app/ora10g/product/10.2.0/Db_1/network/log/listener10g.log
TNS-01150: The address of the specified listener name is incorrect
Listener failed to start. See the error message(s) above...
Back to orijinal format again everyhing is OK. -
Anyone can help with the below issue please? Much appreciated.
We have about 2k+ messages in sys.transmission_queue
Telnet to the ports 4022 is working fine.
Network connectivity has been ruled out.
The firewalls are OFF.
We also explicitly provided the permissions to the service account on Server A and Server B to the Service broker end points.
GRANT
CONNECT ON
ENDPOINT <broker> <domain\serviceaccount>
Currently for troubleshooting purposes, the DR node is also out of the Availability Group, which means that we right now have only one replica the server is now a traditional cluster.
Important thing to note is when a SQL Server service is restarted, all the messages in the sys.transmission queue is cleared immediately. After about 30-40 minutes, the errors are continued to be seen with the below
The
connection was
closed by the
remote end,
or an
error occurred while
receiving data:
'64(The specified network name is no longer available.)'We were able to narrow down the issue to an irrelevant IP coming into play during the data transfer. We tried ssbdiagnose runtime and found this error:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>SSBDIAGNOSE -E RUNTIME -ID 54F03D35-1A94-48D2-8144-5A9D24B24520 Connect to -S <SourceServer> -d <SourceDB> Connect To -S <DestinationServer> -d <DestinationDB>
Microsoft SQL Server 11.0.2100.60
Service Broker Diagnostic Utility
An internal exception occurred: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
P 29830 Could not find the connection to the SQL Server that
corresponds to the routing address tcp://XX.XXX.XXX.199:4022. Ensure the tool is connected to this server to allow investigation of runtime events
The IP that corresponds to routing address is no where configured within the SSB. We are yet unsure why this IP is being referred despite not being configured anywhere. We identified that this IP belongs to one of nodes other SQL Server cluster, which has
no direct relation to the source server. We failed over that irrelevant SQL Server cluster and made another node active and to our surprise, the data from sys.transmission_queue started flowing. Even today we are able to reproduce the issue, if we bring
back this node [XX.XXX.XXX.199] as active. Since, its a high business activity period, we are not investigating further until we get an approved downtime to find the root cause of it.
When we get a approved downtime, we will bring the node [XX.XXX.XXX.199] as active and we will be running Network Monitor, Process Monitor and the SSB Diagnose all in parallel to capture the process/program that is accessing the irrelevant IP.
Once, we are able to nail down the root cause, I will share more information. -
WinXP to Mac - The Specified Network Name is No Longer Available
Hello,
I cannot figure out, for the life of me, why our WinXP machine won't connect to our Mac.
Mac: Powerbook G4 running OS X 10.4.7, WIndows File Sharing is active and an account is selected which will use Windows sharing.
PC: Windows XP Home Edition, SP2. A file share is active.
We're both using wireless connections via a D-Link DI-624 router. Both the Mac and PC are on the same workgroup and have different machine names. Both are on the same subnet.
The Mac can connect to Windows XP share directories and printers without a problem. The Windows XP machine can browse to the Mac's web page when the Personal Web Sharing on the Mac is active. The XP machine can even ping the Mac's address with no packet losses.
However, when the XP machine tries to connect to the Mac (via Map Network Drive or from the command line) using \\machine\share, we get the following error: "The Specified Network Name is No Longer Available". The Mac's machine name shows up when we do a search for computers, but gives us that same error when we double click on it. Furthermore, the printer name does not show up in the printer list, although the Mac's machine name does.
Any ideas? Any more information needed?
Thanks a lot. This problem is driving me insane. :/
ScottI finally figured it out! It had to do with the smb.conf file and a missing file. Here's what happened (for people with future problems like this):
o Looked at the log.smbd file (in /var/log/samba) and saw errors about not being able to convert from CP0. Searched online and found (from http://discussions.apple.com/thread.jspa?messageID=2490054�) that I needed to change 'dos charset = 0' to 'CP850'...
o In Terminal, did a 'sudo pico /etc/smb.conf' and changed the line "dos charset = 0" to "dos charset = CP850"
o Still didn't work, and found from the log.smbd file that the convert msg was gone, but was replaced with a "Failed to open /private/var/db/samba/secrets.tdb" msg.
o I saw that the directory (at the ..../samba level) didn't exist, so, from Terminal, I used sudo to create the /private/var/db/samba directory (sudo mkdir /private/var/db/samba), and did a 'sudo touch secrets.tdb' to create the file, then 'sudo chown root:wheel secrets.tdb' to assign the correct user/group.
Used 'sharepoints' program to create shares and voila! It works great now!
To share my printer, I'm using bonjour, which is a free printer/etc. sharing program from Apple for those with OS X 10.4 (Tiger) and WinXP/2000/2003 machines (http://www.apple.com/macosx/features/bonjour/). -
The Exchange Management Shell fails to connect in Exchange 2013 environment, this is a DAG environment and previously it indicates another error message, which is in my another thread. We fixed that error by delete the retired proxy entry in the server registry,
after that the error is gone but changed to below one, anyway the EMS still fails to connect to all servers:
VERBOSE: Connecting to NSWVIP999WTMBX.air.abc.au.
New-PSSession : [NSWVIP999WTMBX.air.abc.au] Connecting to remote server NSWVIP999WTMBX.air.abc.au failed with the
following error message : WinRM cannot complete the operation. Verify that the specified computer name is valid, that
the computer is accessible over the network, and that a firewall exception for the WinRM service is enabled and allows
access from this computer. By default, the WinRM firewall exception for public profiles limits access to remote
computers within the same local subnet. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : WinRMOperationTimeout,PSSessionOpenFailed
Failed to connect to an Exchange server in the current site.
Enter the server FQDN where you want to connect.:
Then it just show can't connect to all the exchange servers, from the wording it seems pointing to the Windows firewall settings for winRM, but when I look at the windows firewall found it's turned off. We use Sophos enterprise for the security, but all
other 3 exchange servers didn't have the same issue.Hi Lynn,
Thanks for your analyst and reply, I run the command as you suggested and checked accordingly to Task Manager, but seems none of them indicates a firewall or anti-virus.
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:808 0.0.0.0:0 LISTENING 2260
TCP 172.17.2.123:444 172.16.2.127:8050 ESTABLISHED 4
TCP 172.17.2.123:444 172.16.2.127:8069 ESTABLISHED 4
TCP 172.17.2.123:444 172.17.2.127:8053 ESTABLISHED 4
TCP 172.17.2.123:10952 172.16.2.68:80 ESTABLISHED 3296
TCP 172.17.2.123:11185 172.16.2.90:8080 SYN_SENT 468
TCP 172.17.2.123:11190 172.16.2.90:8080 SYN_SENT 15268
TCP 172.17.2.123:11330 172.16.2.90:8080 SYN_SENT 1296
TCP [::]:80 [::]:0 LISTENING
4
TCP [::]:808 [::]:0 LISTENING
2260
TCP [::1]:6001 [::1]:8028 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8029 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8030 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8031 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8032 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8033 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8034 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8035 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8036 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8037 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8040 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8041 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8048 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8049 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8059 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8060 ESTABLISHED 4764
TCP [::1]:8028 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8029 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8030 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8031 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8032 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8033 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8034 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8035 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8036 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8037 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8040 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8041 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8048 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8049 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8059 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8060 [::1]:6001 ESTABLISHED 9980
TCP [fe80::9054:e8f5:f885:8105%20]:808 [fe80::9054:e8f5:f885:8105%20]:9901
ESTABLISHED 2260
TCP [fe80::9054:e8f5:f885:8105%20]:9901 [fe80::9054:e8f5:f885:8105%20]:808
ESTABLISHED 4868
This is the full result, among them
4 -- System -- NT Kernel & System
468 -- There is no process associated with PID 468
1296 -- svchost.exe -- Host Process for Windows Service
2260 -- SMSvcHost.exe -- SMSvcHost.exe
3296 -- CcmExec.exe -- CCM Executive
4764 -- Microsoft.Exchange.RpcClientAccess.Service.exe -- Microsoft.Exchange.RpcClientAccess.Service.exe
4868 -- Microsoft.Exchange.ServiceHost.exe -- Microsoft.Exchange.ServiceHost.exe
9980 -- w3wp.exe -- IIS Worker Process
15268 -- ServerManager.exe -- Server Manager -
Hi!
We have two companies in our building, Company A and Company B. Company A has 50 client computers and one brand new DC (Win 2012 R2 Std). Company B has 5 clients and one established DC (Win 2008 R2 Foundation).
I work for Company A and I have the job of connecting all 50 clients to the new DC. Up until last week we had a workgroup set up and it has been my task to migrate our clients onto the domain. I have done 10 migrations of Win 7 machines so far, but three
others seem to be unable to connect with the error: The specified network name is no longer available.
I have connected these successfully to Company B Domain Controller successfully so this seems to point towards Company A DC being wrong somewhere, but doesn't make sense as to why 10 other clients have connected fine.
Here are the troubleshooting steps I have taken so far:
I am in the Domain Admin group on Company A Active Directory
Computer Browser Service is running on server and affected client
Workstation Service is running on server and affected client
Server Service is running on server and affected client
To connect to the domain I have tried using the NetBIOS and the FQDN, I get the same error message.
NETLOGON service is enabled tried restarting - no difference
Windows Firewall is off
No AV installed at the moment. I have Sophos waiting to go on once the machine is hooked onto the domain.
DNS Reverse lookup manually created as it wasn't there
Tried ipconfig /flushdns /release /renew
NSLookup sucessful, can ping NETBIOS, FQDN of server and both client and server IP both directions
Affectted clients are configured with one network card.
I've been pulling my hair out for a few days on this one. Anyone have a possible solution for this.
Many thanks,
MattHi!
We have two companies in our building, Company A and Company B. Company A has 50 client computers and one brand new DC (Win 2012 R2 Std). Company B has 5 clients and one established DC (Win 2008 R2 Foundation).
I work for Company A and I have the job of connecting all 50 clients to the new DC. Up until last week we had a workgroup set up and it has been my task to migrate our clients onto the domain. I have done 10 migrations of Win 7 machines so far, but three others
seem to be unable to connect with the error: The specified network name is no longer available.
I have connected these successfully to Company B Domain Controller successfully so this seems to point towards Company A DC being wrong somewhere, but doesn't make sense as to why 10 other clients have connected fine.
Here are the troubleshooting steps I have taken so far:
I am the Domain Admin group on Company A Active Directory and have full Admin rights to Company B
Computer Browser Service is running on server and affected client
Workstation Service is running on server and affected client
Server Service is running on server and affected client
NETLOGON service is enabled tried restarting - no difference
IPv6 is enabled, but not used
DCDIAG tests all pass
NIC 2 has been disabled as it is not used
NIC 1 is first priority
To connect to the domain I have tried using the NetBIOS and the FQDN, I get the same error.
Windows Firewall is off
No AV installed at the moment. I have Sophos waiting to go on once the machine is hooked onto the domain.
DNS Reverse lookup manually created as it wasn't there
Tried ipconfig /flushdns /release /renew /registerdns
NSLookup sucessful, can ping NETBIOS, FQDN of server and both client and server IP both directions
Affected clients are configured with one network card.
*****Domain Controller*****
C:\>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : AG-ADDS
Primary Dns Suffix . . . . . . . : aggora.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : aggora.local
Ethernet adapter NIC1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
Physical Address. . . . . . . . . : F8-BC-12-3D-C7-6A
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::b499:7b3b:5ee7:618c%12(Preferred)
IPv4 Address. . . . . . . . . . . : 10.0.0.251(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.0.0.4
DHCPv6 IAID . . . . . . . . . . . : 318290962
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1B-3E-88-37-F8-BC-12-3D-C7-6A
DNS Servers . . . . . . . . . . . : ::1
10.0.0.251
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{F2A8A31C-01D2-4F6F-8CFF-A5AB69F344A8}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
*****Problematic Client*****
C:\>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : AG21
Primary Dns Suffix . . . . . . . : aggora.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : aggora.local
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : aggora.local
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : 00-19-99-9B-90-5B
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 10.0.0.115(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 23 July 2014 10:12:30
Lease Expires . . . . . . . . . . : 24 July 2014 10:12:30
Default Gateway . . . . . . . . . : 10.0.0.4
DHCP Server . . . . . . . . . . . : 10.0.0.253
DNS Servers . . . . . . . . . . . : 10.0.0.251
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.aggora.local:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : aggora.local
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
I'd be grateful for any assistance.
Many thanks, -
Cannot copy file: The specified network name is no longer available
After several tries stretching over weeks or months, I finally solved this problem. Internet sharing and transferring small files worked fine over the wireless network, but files over about 50 - 100 MB would fail giving the message "Cannot copy : The specified network name is no longer available. After suggesting numerous changes to the router setup, telling me that my Ethernet NIC in my desktop must be bad, and that I my file sharing or memory configuration was wrong, Linksys support finally suggested upgrading the router's firmware. Problem solved. I can now transfer 1 GB files with no problem over the wireless network. This is on a WRT54GS wireless router.
Upgrading the firmware isn't a 5-minute operation. Allow 1-2 hours. Before you do anything, make a copy of all router setup info. The firmware upgrade resets the router to defaults, so you lose your wireless network setup and any other setup info that you changed. Also, customer support sent me a more involved procedure than what was in the router Help info. It included things like temporarily assigning a static IP address to the computer wired to the router for the update. You might want to get that procedure from them. Also, some of the info about reconfiguring the wireless network after the upgrade was incorrect for my network; another reason to make sure you have all the details of your router setup saved before you upgrade.Hi! I'm Engr. Michael, a network engineer from the Philippines. Firmware upgrade does not take 1-2 hours believe me. Try this instead ok? The
version of your router is on CPN alert which means it needs upgrading. So, connect your pc
first directly to the modem and go to this website -- www.linksys.com/connect. select
easylink firmware tool and save it to your desktop. Now connect your the modem back to the
router (internet port) and pc to port number 1. Run the file you have downloaded and it will
automatically upgrade the firmware of your router.Then follow instructions and That's it. You're good to go..
Tell me if
it works ok? Thanks for your time. -
RDS Gateway + Smart Card Error [ The specified user name does not exist.]
I have the following Windows Server 2008 R2 servers:
addsdc.contoso.com, AD DS Domain Controller for contoso.com
adcsca.contoso.com, AD CS Enterprise CA, CDPs/AIAs published externally.
fileserver.contoso.com, RDS Session Host for Administration enabled
rdsgateway.contoso.com, RDS Gateway enabled
tmgserver.contoso.com, 'Publishing' rdsgateway.contoso.com but with pass-through authentication
And the following Windows 7 PCs:
internalclient.contoso.com
externalclient.fabrikam.com
There's no trust between the domains, the external client is completely separate on the internet but the CA certificate for contoso.com has been installed in the trusted Root CA store. All servers have certificates for secure RDP.
I enrolled for a custom 'Smart Card Authentication' certificate with Client Authentication and Smart Card Logon EKUs from the CA, stored on my new Gemalto smart card using the Microsoft Base Smart Card CSP.
From internalclient.contoso.com, I can RDP to fileserver.contoso.com
using the smart card just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using a username and password just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using the smart card to authenticate to the gateway, and a username and password to authenticate to the end server, just fine.
BUT from when using a smart card to authenticate to the end server via the gateway, it fails with:
The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support.
When I move the client into the internal network and try the connection again (still via the RDS Gateway), it works fine - the only thing I can think of is being outside the network and not being able to contact the AD DS DC for Kerberos is causing the issue
- but I'm pretty sure this is a supported scenario?
The smart card works fine internally, the subject of the certificate is the user's common name (John Smith) and the only SAN is
[email protected] which matches the UPN of the user account as it was auto-enrolled.
Does anyone have any ideas?I had a similar issue where I am using a smart card through a Remote Desktop Gateway. I had to disable Network Level Authentication (NLA) on the destination Remote Desktop Server. If anyone has another way around this, I'd appreciate hearing it. I'd prefer
to use NLA. -
64 The specified network name is no longer available
Hi Experts,
We have been using TMG 2010 from last 5 years as a reverse web proxy for OWA , outlook anywhere , active sync etc. Of late users from one particular site have been complaining of regular disconnections on outlook and OWA.
We don't have complaint from any other site except to this , whereas users in this site can browse other secure web sites without any challenge.
I have diagnosed the packets coming from their public IP and i could see that lot of connections happen successfully whereas few it shows either denied connection or failed connection attempt.
if i concentrate on failed connection attempt , i get the below information. Can some one provide any hint on the possible resolution for this issue.
Any help would be much appreciated
Failed Connection Attempt
3/19/2015 1:29:14 PM
<id id="L_LogPane_LogType">Log type:
</id><id id="L_LogPane_WebProxyForward">Web Proxy (Reverse)</id>
<id id="L_LogPane_Status">Status: </id>64 The specified network name is no longer available.
<id id="L_LogPane_Rule">Rule:
</id>Outlook anywhere success rule
<id id="L_LogPane_Source">Source:
</id>External (91.230.41.193:53933)
<id id="L_LogPane_Destination">Destination:
</id>Local Host
<id id="L_LogPane_FilterInfo">Filter information:
</id>Req ID: 19374dc2; Compression: client=No, server=No, compress rate=0% decompress rate=0% ; FBA cookie: exists=no, valid=no, updated=yes, logged off=no, client type=unknown, user activity=yes
<id id="L_LogPane_Protocol">Protocol:
</id>https
<id id="L_LogPane_User">User:
</id>anonymous
Md.Abubakar Noorani IT Systems Engineer Serco Ltd.Hi,
>>64 The specified network name is no longer available
This error is very general. You need to collect a network trace and analyze it. The most common one is when the backend server is performing a dirty TCP connection reset.
You could have a look at the blog below.
Error 64 “ The specified network name is no longer available” while accessing a
HTTPS site through ISA 2006
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
BMR-SS backup fails with error "the specified network name is no longer available"
We are running DPM 2012 SP1 on a Windows Server 2008 R2 system, backing up a Windows Server 2012 system that is a DC. The agent version is 4.1.3417.0. Both the DPM server and the DC are physical systems - brand new HP Proliant 360's.
When creating the replicas for the 2012 server the first time, the backups work fine, and then for a day or so after that. After a couple of days, the BMR-SS backups fail with the error "the specified network name is no longer available".
I can watch the backup happening in the Windows Server Backup console on the protected server - the BMR backup goes up to 99% and then fails. BMR backups on all the other servers are working - we have a mix of Win2008R2 and Win2012.
Here is what I have tried:
I can connect to the UNC path on the backup server without a problem during and after the backup is happening.
Tried reinstalling the DPM agent.
Tried backing up directly from the protected server to another server's network share, which worked.
I can copy multiple gigabyte files directly from the protected server to the DPM file share without a problem (the same one that DPM uses for the replica)
Tried turning off the SCEP real-time protection during the backup.
Any help would be appreciated - thanks.
KWllo Boudewijn
I followed Boudewijn's suggestion.
The Windows 2012R2 servers had no recovery partition in disk C. I created one (400MB) following http://support.microsoft.com/kb/2930294/en-us and
DPM system restore worked. But just once.
So this is not the solution to the problem......
Is no one else having issues with DPM bare metal protection of Windows 2012R2 servers? -
"the specified network name is no longer available"
I have a weird situation. I am using both iMac and Dell laptop. I use AEBS a1s a bridge - AT & T installed a wireless router and one hard line, and I plug my AEBS on the hard line. Dell is connected to AT&T router (and then to AEBS through hard ethernet line) with 801g. I connect my iMac to AEBS with 801n. I also attach a USB printer and 500G external HDD to AEBS. I formatted HDD with FAT32.
In terms of iMac, everything is working fine; I can print, I can read (or play) the files in Airdisk, and I can write (or copy) the files on Airdisk. No problem.
Dell laptop is a problem. Good things: I can print to the USB printer plugged in AEBS. I can read/play files stored in Airdisk. BAD THINGS: Every time I try to copy a file(s) to the HDD plugged in Airdisk, this error message appears: "the specified network name is no longer available"
If I cannot see the Airdisk at all, or cannot print any documents to AEBS-connected printer, then I may believe the network problem. Well, I can print a paper, I can read/play files in the HDD, but I cannot copy a file to the HDD! The size is less than 400MB, so the size should not be a matter.
I called Apple Tech Support, and they have kept me waiting for 32 minutes (and counting - now is 5:50pm PST - 10 minutes to go!). I have searched Apple discussion, Google, whatever, in vain.
Please share any tips with me. My iMac is run by Leopard, and I have Win XP SP3 for my Dell; Airport Utility is 5.3.2.I solved the problem in this way: i had the hard disk and the printer connected to a usb hub. I tried to directly connect the hard disk to my airport and everything was ok! Now I can copy files without any problem...
Hope to help someone else! -
"The Specified Network name is no longer enough"
Hi,
We have our (Windows Server 2008 R2) file server in remote location. I have a Linux server in my location...and I am using Windows 7 Pro 64-Bit.
we have Firewall to Firewall(Both are Sonicwall) VPN enabled between remote site and our location.
I have a Samba Share in my Linux server. I mapped this share as "P"drive in my Windows 7 PC.
While I am copying files from "File server" to local "P" drive....{ I am using xcopy command to copy the files: xcopy "\\fileserver\criss\" "P:\criss\" /Y}..it copies for few seconds and then it says " The specified
network name is no longer enough". some times it copies for long time and then says the same error.
I was able to do this till last week...Some how suddenly its not working...I automated this using Task Scheduler...it worked for 2 months without any issues.
Everything works fine in my Windows XP PC. (Clearly it seems to be an issue with windows 7)
Please help me with this.Kdhara wrote:
M able to copy the files from server to local C, and able to copy to
samba server.....However somehow, when I try to access the fileserver
using RUN command (Eg:\\fileserver <file://\\fileserver>) sometimes
it works fine and sometimes it wont connect and says "The Specified
Network name is no longer available"....I observerd the both ways
around 1-2 Hours ....
So you do not have the issue, that a filecopy operation aborts in the
middle of the operation as you said in your root-post, but that you
sometimes cannot access your W2008R2 server via UNC-path?
In this situation I'd first check, that you do not have any
offline-files defined for that server (- because you need to be
patient, if using this feature, as it takes awhile for this feature to
detect changes in connectivity).
Further as you are using Netbios name resolution and accessing a server
in another subnet do you have a valid WINS-server, which has an entry
for your W2008R2 server, configured on your Win7 PC - or do you have a
correct entry in the LMHOSTS file for your W2008R2 server?
But generally speaking it is quite normal for Netbios name resolution
to fail for quite some time if the Master Browser service in your
subnet changes due to a change of network topology like shutting down a
computer or starting up a computer, etc. . If you don't need the
browsing capabilities, which netbios delivers, it is much more reliable
and quicker to use DNS as name resolution for Windows networks, too.
Wolfgang -
I get a pop-up message saying "A server with the specified host name could not be found", whenever I try to access any streaming websites/apps or even WhatApp over Wi-Fi and I cannot access the specific THING for that moment, and I've tried switching Wi-Fi On and Off both in my Phone and also in the Router. I got an internet connection and a Wi-Fi router just before two days, and it's happening since. I got the internet speed around 80kbps and i can easily stream YouTube videos except sometimes, I receive that annoying message. I can't even browse the internet in Safari, which says "No Internet Connection"(Even though the Wi-Fi is connected), and I can access it after somewhile (say 10 minutes, it'll be perfectly alright). I use iPhone 4s. And everything about the internet connection is totally fine in my Computer, but not in my iPhone, as I've explained the issues, above. If there are any technical settings that I should change/modify, either on my computer(Windows 7 OS) or in my iPhone(iOS 7.0.4), PLEASE let me know
I hope I've provided enough information for the reader to understand my point. (I apologize for my verbal mistakes, if there are )
THANKSHello Paneesh,
Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone 4s. I recommend the following steps:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
If the issue is still unresolved Wi-Fi disconnects or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
You can find the full article here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for using Apple Support Communities.
Best,
Sheila M. -
The specified resource name cannot be found in the image file.
Dear Experts,
I have developed an import too and it imports many of the Business Objects from a temporary data base to SAP B1. It was running fine for more than 6 months now.
Currently when the Tool is importing Credit Notes in to SAP B1, the following error is thrown.
The specified resource name cannot be found in the image file.
And I have no Clue about the error. Any one had any experience regarding the above error???
Thanks in Advance,
Vasu Natari.Hello VAsu,
Somethimes this unexpected, ununderstandable eroor messages caused by corrupted observer dll.
Do a clean up (delete %TEMP%SM_OBS_DLL) folder, and see the result ! (i had several issues in the past with some strange messages...)
Regards
János -
Hi,
We have a cluster with 2 nodes. Everything works fine in Node1. When I try to failover TEST1 database to Node-2 it fails with this message.
Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.
Any help is much appreciated.
ThanksHello,
The error message is pretty straight forward, it's saying either the service isn't installed or it's not installed as the same service on that node. Did you install analysis services on the second node (from the error it seems like it isn't)?
Sean Gallardy | Blog |
Twitter
Maybe you are looking for
-
Using SQL Server 2008 R2. Tempdb resides on disks W and X both of those are 250 GB each. Nothing else resides on these disks. The recovery mode for tempdb is set to Simple and is split in 8 files and one log file. Each of the tempdb file is set for a
-
Hi We have ECC6.0, BI and EP7.0 (Nw2004s) in 3 different boxes (one for each). The Sld is configured in the BW box. Now I would like to configure the SLD in the EP box. Is there way where I can transport the SLD to the Ep system? If yes How? Also if
-
The power button on my Tungsten E2 not working consistently. What do I need to do to it? Hard to turn my palm on when the button does not work properly. Post relates to: Tungsten E2
-
HT5622 Apple ID and password don't work on iTunes!
My apple ID and password are rejected on itunes, but works elsewhere... why? Help!
-
Here is an app which will let you browse the market on your pc then you can sync with your phone and install what ever you want. WWW.APPBRAIN.COM