TNS-12538: TNS:no such protocol adapter, and install MS loopback adapter

Hello,
I am trying to install oracleAS Infrastructure and portal on my windows xp pc. (Oracle Application Server 10g Release 2 (10.1.2)
At some point of the installation for Internet Directory Configuration Assistant, there is an error:
===========================================================
Output generated from configuration assistant "Internet Directory Configuration Assistant" (attempt 2):
Myinfra.mypcname.domainname
java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionat oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
===========================================================
After did some searching, I find I may need to install MS loopback adapter.
So I followed http://support.microsoft.com/kb/839013 to install the MS Loopback adapter.
After I installed, When I open the Network Connetcions, I found there are two local area connetcions. One of then called local area connection 2, and it's MS loopback adapter. I got a warning for local area connection 2, it says that my pc does not have a IP address assigned, and its status is : limited or no connectivity .
I tried to repair to establish the full connection by clicking on the repair button, but the process is failed.
I also tried to run command: tnsping orcl ( orcl is my database service name ), after installed the loopback adapter.
tnsping orcl, still got this error:
======================================================
C:\>tnsping orcl
TNS Ping Utility for 32-bit Windows: Version 9.0.1.4.1 - Production on 16-MAR-20
06 22:41:35
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
E:\oracle\product\10.1.0\Db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =mypcname.mydomainname)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))
TNS-12538: TNS:no such protocol adapter
===================================================
btw. my pc IP was assigned by DHCP, and pc host name is something like: abcd.abc.edu
Q1. I am wondering which local area connection is currently used by default ? If it's the old one, how to configure it to use the new added one? ( local area connetcion 2 ).
Q2. Do I have to install MS Loopback adapter for installing Oracle Application Server 10g Release 2 (10.1.2)?
I don't have a fixed IP, however my IP is seldom changed. And I'm ok with 127.0.0.1
Any suggestion ?
Thanks for your reply,
Emily

Similar Messages

TNS-12538: TNS:no such protocol adapter, please delete this thread, Sorry!

Hello,
I am trying to install oracleAS Infrastructure and portal on my windows xp pc,
At some point of the installation for Internet Directory Configuration Assistant, there is an error:
===========================================================
Output generated from configuration assistant "Internet Directory Configuration Assistant" (attempt 2):
Myinfra.mypcname.domainname
java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionat oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
===========================================================
After did some searching, I find I may need to install MS loopback adapter.
So I followed http://support.microsoft.com/kb/839013 to install the MS Loopback adapter.
After I installed, When I open the Network Connetcions, I found there are two local area connetcions. One of then called local area connection 2, and it's MS loopback adapter. I got a warning for local area connection 2, it says that my pc does not have a IP address assigned, and its status is : limited or no connectivity .
I tried to repair to establish the full connection by clicking on the repair button, but the process is failed.
I also tried to run command: tnsping orcl ( orcl is my database service name )
tnsping orcl, still got this error:
======================================================
C:\>tnsping orcl
TNS Ping Utility for 32-bit Windows: Version 9.0.1.4.1 - Production on 16-MAR-20
06 22:41:35
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
E:\oracle\product\10.1.0\Db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =mypcname.mydomainname)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = o
rcl)))
TNS-12538: TNS:no such protocol adapter
===================================================
btw. my pc IP was assigned by DHCP, and pc host name is something like: abcd.abc.edu
Q1. I am wondering which local area connection is currently used by default ? If it's the old one, how to configure it to use the new added one? ( local area connetcion 2 )
Q2. Do I have to install MS Loopback adapter ? I don't have a fixed IP, however my IP is seldom changed. And I'm ok with 127.0.0.1
Any suggestion ?
Thanks for your reply,
Emily

Hi Rajesh Vig
Thank for your help.
I did change follow your advice. But it doesn't work at all.
However, before finishing configured listener, something warn me as popup message.
"The information provided for this listener is currently in use by other software on this computer.
You can proceed with the configuration as it is, but it will not be possible to start this listener until
the conflict is resolved."
I'm so doubt, what wrong with my listener. Why did oracle warn me that my listener was conflict with another. Although, there was no listener.ora at that time. ?????
Here is my new listener.ora created by netca.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/ZTDB3/bin/oracle10/product/10.2.0)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.104.131.92)(PORT = 1530))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
$ lsnrctl start
TNSLSNR for Solaris: Version 10.2.0.3.0 - Production
System parameter file is /oracle/ZTDB3/bin/oracle10/product/10.2.0/network/admin/listener.ora
Log messages written to /oracle/ZTDB3/bin/oracle10/product/10.2.0/network/log/listener.log
TNS-01150: The address of the specified listener name is incorrect
TNS-01153: Failed to process string: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ztdb3)(PORT=1530)))
Listener failed to start. See the error message(s) above...
$ netstat -an | grep 1530
no result shown up.
If you have found something wrong, please advise me. Thank you.

TNS-12538: TNS:no such protocol adapter

hi, i'm a newbie for oracle... now I face some problem while i try to create database.
After i installed Oracle 10g on Solaris 10x86-64, I created listener.ora by using netca.
but I cannot start it. error shown as
$ lsnrctl start
TNSLSNR for Solaris: Version 10.2.0.3.0 - Production
System parameter file is /oracle/ZTDB3/bin/oracle10/product/10.2.0/network/admin/listener.ora
Log messages written to /oracle/ZTDB3/bin/oracle10/product/10.2.0/network/log/listener.log
TNS-01150: The address of the specified listener name is incorrect
TNS-01153: Failed to process string: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.104.131.92)(PORT=1524)))
Listener failed to start. See the error message(s) above...
$ lsnrctl status
LSNRCTL for Solaris: Version 10.2.0.3.0 - Production on 12-SEP-2008 10:05:30
Copyright (c) 1991, 2006, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.104.131.92)(PORT=1524)))
TNS-12538: TNS:no such protocol adapter
TNS-12560: TNS:protocol adapter error
TNS-00508: No such protocol adapter
how can I fix this problem? also I cannot sqlplus / as sysdba
error shown as
$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Sep 12 10:28:56 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
ERROR:
ORA-12157: TNS:internal network communication error
please help me...thank you.

Hi Rajesh Vig
Thank for your help.
I did change follow your advice. But it doesn't work at all.
However, before finishing configured listener, something warn me as popup message.
"The information provided for this listener is currently in use by other software on this computer.
You can proceed with the configuration as it is, but it will not be possible to start this listener until
the conflict is resolved."
I'm so doubt, what wrong with my listener. Why did oracle warn me that my listener was conflict with another. Although, there was no listener.ora at that time. ?????
Here is my new listener.ora created by netca.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/ZTDB3/bin/oracle10/product/10.2.0)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.104.131.92)(PORT = 1530))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
$ lsnrctl start
TNSLSNR for Solaris: Version 10.2.0.3.0 - Production
System parameter file is /oracle/ZTDB3/bin/oracle10/product/10.2.0/network/admin/listener.ora
Log messages written to /oracle/ZTDB3/bin/oracle10/product/10.2.0/network/log/listener.log
TNS-01150: The address of the specified listener name is incorrect
TNS-01153: Failed to process string: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ztdb3)(PORT=1530)))
Listener failed to start. See the error message(s) above...
$ netstat -an | grep 1530
no result shown up.
If you have found something wrong, please advise me. Thank you.

Database link : TNS-12538: TNS:no such protocol adapter

I have created a database link on schema1:
CREATE public DATABASE LINK db_link
CONNECT TO schema2 IDENTIFIED BY schema2
USING 'schema2' (service name);
While I am testing this link to access the object of schema 2 on schema1
i am getting error:TNS-12538: TNS:no such protocol adapter
In tnsnames.ora file of schema1,i have also included the details for schema2.
Please tell me the solution of this problem
Thanks in advance

Hi,
Can you ping the schema2 which is another DB or can you connect to schema2 DB with the service which you have used for DB link.
Check that first functioning correct or not.
Check this link.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/ds_admin.htm#sthref4108
Pavan Kumar N

Is the Apple Digital AV Adapter and the Apple VGA Adapter the same thing

is the Apple Digital AV Adapter and the Apple VGA Adapter the same thing i want to get a ipad and i want to no if there the same thing before i buy it i would want it for the web for pic but for videos too

VGA is an analog signal, while HDMI is an uncompressed digital image.
The uncompressed digital image is more superior.

HT201272 How to "unhide" a previously purchased app (such as "iMovie") and install it on my new iPad?

How to "unhide" a previously purchased app (such as "iMovie") and install it on my new iPad?

From http://support.apple.com/kb/HT4919 :
Depending on the content type, open the App Store, iBooks, or iTunes Store on your device.
Scroll to the bottom of the main page.
If you're not already signed in, tap Sign In.
Tap your Apple ID name, then tap View Account.
Scroll down on the Account pane, and tap Hidden Purchases.
Locate the item you would like to unhide then tap the Unhide button.

Microsoft Teredo Tunneling Adapter and Microsoft Teredo Tunneling Adapter #2

I have a Dell XPS STUDIO 7100, with MS Windows 7 Home Premium
for the past several days my system is running poorly.
In device manager there's yellow hi-lite for MS Teredo Tunneling Adapter
and Adapter #2.
the postings I've seen are not current. What is the most current info
regarding these Adapters and do I really need them?

Hi,
Here i share my test for such issue, which you can try:
Press Win + R, type regedit in Run.
Loate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\TCPIP6\Parameters.
Find DisableComponents value, ( if you can not find it, please attempt to create one vaule ), then modify the Dword value to 0.
Reboot your computer.
Andy Altmann
TechNet Community Support

My MBP Retina doesn't allow the use of two Thunderbolt to DVI adapters. It only works with one TB - VGA adapter and one TB - DVI adapter. However now the color on the VGA connected monitor is slightly different.

The monitors are Viewsonic VA2406m-LED. The Display preferences show all three monitors but one monitor always says "No Signal" if they are both connected TB -> DVI.
The Color on the VGA connected one is slighly off. It seems like I should be able to connect two DVI monitors not sure why this is stopped. Does it have something to do with the Graphics card?

The problem was with the newEgg adapter. I just went to the Apple Store and bought an Apple adapter and the monitor now displays correctly.
For future reference, in case anyone experiences this problem:
the newEgg adapter is part number 9SIA1PU0P88920, described as a Thunderbolt Mini Displayporrt Display Port DP to DVI Adapter for APPLE Macbook Pro Air and the full description says it works for macbook pro, etc.
when this adapter is used, the macbook pro recognizes the monitor, but the monitor displays nothing.
When the apple adapter (MB507Z/B Mini Display Port to DVI Adapater) is used, the monitor displays correctly.
Of course, the individual newEgg part might simply be defective, but I doubt it. moral -- spend the extra $$ and buy the Apple adapter.

How to install Microsoft Loopback Adapter

I want to install the Microsoft Lookback Adapter in Windows 7. I have done this under Vista either via:
1) Control Panel, Classic View, Add Hardware
2) Device Manager, right click on root node and select Add Legacy Hardware
I can't find the equivalent under Windows 7 - any suggestions?
Thanks!

I have a video that covers the steps to install the Microsoft Loopback Adapter in Windows 7. Hope this helps...
http://www.youtube.com/watch?v=R9674zGHxrE
Guides and tutorials, visit
ITGeared.com.

Do i really need to install Microsoft Loopback Adapter ?

i am installing oracle 10g on windows xp proffessional + AMD sempron 3100+
when started oracle universal installer, i received a warning like following :
DHCP configuration detected , you need to configure ur primary loopback adapter to MICROSOFT LOOPBACK ADAPTER
i m using belkin wireless card to connect to internet and i dont need to change it anyway.
please someone suggest me : whether i shud continue with this warning OR do i need something more before installing oracle 10g ???
thanks in advance,
-imranmca

I have Windows XP professional SP2 with a static ip address of my internal lan.
The installation don't pass the check about lan with the same message as you
"DHCP configuration detected , you need to configure ur primary loopback adapter to MICROSOFT LOOPBACK ADAPTER". Why?
I followed the instructions and now is all working adding in the hosts file 2 lines and not only one:
IP_addr computer_name.domain computer_name
IP_addr sid_name.domain sid_name
I'm not convinced of my euristic solution... can someone explain me why i have to configure the microsoft loopback adapter when i don't have a dhcp configuration?

Installing a Loopback adapter without a Domain Name

Im trying to install the microsoft loopback adapter for the oracle 10g database. In one of the steps I was supposed to configure the "hosts" file within the driver directory of the windows folder.
Below is the precise directions... I dont have a domain name, I just have a internet service that gives me a dynamic IP address... what do I do?
Add a line to the SYSTEM_DRIVE:\WINDOWS\system32\drivers\etc\hosts file with the following format, after the localhost line:
IP_address hostname.domainname hostname
where:
IP_address is the non-routable IP address you entered in step 16.
hostname is the name of the computer.
domainname is the name of the domain.
For example:
10.10.10.10 mycomputer.mydomain.com mycomputer

Make one up.
Or not.
The domain name in the /etc/hosts is optional.
Since you use /etc/hosts, you are not using a DNS server for that specific interpretation. Therefore you can use whatever you want. I'd use something like 'glomph.tst' just so I can have thje joy of typing that in the browser URL box.

Travel Adapter and iPod USB Power Adapter

I know this is going to sound like a stupid question but this is all new to me so please bear with me I just bought an iPod video, a World Travel Adapter kit and the Power Duo kit - which contains a power block wall charger, USB mini cable, and car charger. I was looking at the plugs in the travel kit and do not see how they work. The product data says that it works with the USB power adapter - which at this point I am assuming is different than the power block wall charger? Can someone verify this for me? Also, can someone then tell me how these travel adapters plug into the USB power adapter (or power block wall charger) so that they can be used when traveling overseas. I can't tell from the photo of the USB adapter how this would be done...I don't want to buy yet another power adapter if I don't need one, but I sure can't see how they work with what I have so far or how they would work with the USB power adapter..I would have thought that the travel kit would have some with everything that I need but apparently it doesn't.
Thanks in advance.
Leslie
ipod video Other OS

Now I have hooked it up to a PC without itunes on it. The ipods says it is charging but when you disconnect you can see that the battery level is even lower. Does this mean that I should just take back the ipod to exchange it for a working one?
Thanks

Sender RFC Adapter AND Rec. File Adapter

Hi
Workflow of my scenario is like this :
SAP R/3 ---> Sender RFC Adapter ---> XI Server -
> Rec. File Adapter -
> Legacy System
I am using Async Inbound interface for this as I dont need any response back & I just need to create file.
I am just picking some data from BAPI & creating a file on a folder in Legacy System.
Now during execution, file is getting created but I am getting dump on SAP R/3 and even when I am using Async communication, response is coming back from Legacy Business System ( service ) & giving an error " No Mapping Program Found " in sxmb_moni.
Kindly suggest how can I avoid getting response from Legacy System. Pls. take note again I am using Async Inbound Interface.
Regards
- Lalit -

Hi Lalit,
When your RFC is called from R/3 by default it would be in Sync mode. When this is in Sync mode it obviously will expect a response and where as in your scenario XI dose'nt give any response and there is no mapping for that and I think that is the reason you are getting that error.
So when your Sender RFC is triggered it will like this in ABAP
CALL Function "Function Name" <SM59 Destination>
and this is Sync call. To make it Async i should be
CALL Function "Function Name" IN BACKGROUND TASK <SM59 Destination>
Hoep this helps
Thanks,
Prakash

TNS:no such protocol adapter

Hai,
When i tried to start lsnrctl>start
i got the following error messages please if some one could resolve my problem it is very urgent
LSNRCTL> start
Starting /usr2/oracle/u01/app/oracle/product/8.1.6/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 8.1.6.0.0 - Production
System parameter file is /usr2/oracle/u01/app/oracle/product/8.1.6/network/admin/listener.ora
Log messages written to /usr2/oracle/u01/app/oracle/product/8.1.6/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC)))
Attempted to listen on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=dbserver)(PORT=1521)))
TNS-12538: TNS:no such protocol adapter
TNS-12560: TNS:protocol adapter error
TNS-00508: No such protocol adapter
null

<BLOCKQUOTE>quote:<HR>Originally posted by Anand Sengodan ([email protected]):
Hai,
When i tried to start lsnrctl>start
i got the following error messages please if some one could resolve my problem it is very urgent
LSNRCTL> start
Starting /usr2/oracle/u01/app/oracle/product/8.1.6/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 8.1.6.0.0 - Production
System parameter file is /usr2/oracle/u01/app/oracle/product/8.1.6/network/admin/listener.ora
Log messages written to /usr2/oracle/u01/app/oracle/product/8.1.6/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC)))
Attempted to listen on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=dbserver)(PORT=1521)))
TNS-12538: TNS:no such protocol adapter
TNS-12560: TNS:protocol adapter error
TNS-00508: No such protocol adapter
<HR></BLOCKQUOTE>
Would probably have to see your listener.ora to know for sure but two things I would look for: AFAIK you can use either tcp or udp for the PROTOCOL= statement in the listener.ora, the Oracle Listener listens on port 1521 so you should add port 1521 to your SERVICES file in the /etc directory. See if either of those help any..
dmm
null

R12 Vision Install Fails, TNS-12560: TNS:protocol adapter error

Below please find the NetServiceHandler.log from the install and an excerpt from ApplyDBTechStack...log
OS: Windows Server 2003 SP2 x86
I have installed the loopback adapter, modified the hosts file, and entered the DNS info. Not sure what else I can do.
-----------begin NetServiceHandler.log-------------------------
Classpath : ;D:\oracle\VIS\db\tech_st\11.1.0\jdbc\lib\ojdbc6.jar;D:\oracle\VIS\db\tech_st\11.1.0\appsutil\java\xmlparserv2.jar;D:\oracle\VIS\db\tech_st\11.1.0\appsutil\java;D:\oracle\VIS\db\tech_st\11.1.0\jlib\netcfg.jar;D:\oracle\VIS\db\tech_st\11.1.0\jlib\ldapjclnt11.jar
===============================================================================
NetServiceHandler 120.19 started for oracleebs at Wed Jun 13 09:32:30 PDT 2012
===============================================================================
[ Context Information ]
Host : oracleebs
Domain : demo.com
Out Dir : D:\oracle\VIS\db\tech_st\11.1.0/appsutil/out/VIS_oracleebs/06130932
Tier Type : DATABASE TIER
Getting connection...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : oracleebs
sDbDomain : demo.com
sDbPort : 1521
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@oracleebs.demo.com:1521:VIS
Exception occurred: java.sql.SQLException: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracleebs.demo.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Exception occurred: java.sql.SQLException: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracleebs.demo.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=VIS.demo.com)))
Exception occurred: java.sql.SQLException: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
Could not get connection to the database.
Exiting with status 100 to instantiate the tnsnames.ora template
Creation of Directory - D:\oracle\VIS\db\tech_st\11.1.0\NETWORK\ADMIN\VIS_oracleebs Succeeded.
instantiate file:
source : D:\oracle\VIS\db\tech_st\11.1.0\appsutil\template\ad8itns.ora
dest : D:\oracle\VIS\db\tech_st\11.1.0\network\admin\VIS_oracleebs\tnsnames.ora
AutoConfig is exiting with status 0
instantiate file:
source : D:\oracle\VIS\db\tech_st\11.1.0\appsutil\template\ad8ilsnr.ora
dest : D:\oracle\VIS\db\tech_st\11.1.0\network\admin\VIS_oracleebs\listener.ora
AutoConfig is exiting with status 0
adgentns.pl exiting with status 0
ERRORCODE = 0 ERRORCODE_END
----------------end NetServiceHandler.log------------------------
-------------------begin excerpt ApplyDBTechStack...log--------------------
SNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2012 09:32:41
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=oracleebs.demo.com)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2012 09:32:43
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting tnslsnr: please wait...
Failed to open service <OracleTNSListenerVIS>, error 1060.
TNSLSNR for 32-bit Windows: Version 11.1.0.7.0 - Production
Message 459 not found; No message file for product=NETWORK, facility=NL
Message 279 not found; No message file for product=NETWORK, facility=NL
Message 1073 not found; No message file for product=NETWORK, facility=TNS
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=oracleebs.demo.com)(PORT=1521)))
STATUS of the LISTENER
Alias VIS
Version TNSLSNR for 32-bit Windows: Version 11.1.0.7.0 - Production
Start Date 13-JUN-2012 09:32:46
Uptime 0 days 0 hr. 0 min. 2 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\oracle\VIS\db\tech_st\11.1.0\network\admin\VIS_oracleebs\listener.ora
Listener Log File D:\oracle\VIS\db\tech_st\11.1.0/network/admin\vis.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.0.0.68)(PORT=1521)))
Services Summary...
Service "VIS" has 1 instance(s).
Instance "VIS", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
addlnctl.cmd exiting with status 0
OpenService failed
adsvdlsn.cmd exiting with status 1007
ERRORCODE = 1007 ERRORCODE_END
.end std out.
.end err out.
-------------------end excerpt ApplyDBTechStack...log-------------------------

Hi;
Pelase check below notes which is mention same error message
On Windows, After 10g Upgrade, Running Autoconfig on Apps Tier Failed with : Unable To Start Apps Services TNS-12224: TNS:no listener TNS-12541 TNS-12560: TNS:protocol adapter error TNS-00511: N .. [ID 577713.1]
Windows Autoconifg on dbTier fails on adcrobj.cmd & adsvdlsn.cmd [ID 356927.1
Rapid Clone on Windows Fails When SID Is Over 8 Characters: "Rc-00118: Error Occurred During Creation Of Database, Failed to open service" [ID 405688.1]
Regard
Helios

TNS-12538: TNS:no such protocol adapter, and install MS loopback adapter

Similar Messages

Maybe you are looking for