TNS-12540:internal limit restriction exceeded

Can any body ref what's happening?
Thanks

This error usually occurs because of an OS parameter limiting the maximum number of processes
that can run on the server. You probably need to set that parameter to a higher value. I know in AIX it called
maxuproc and defaults to 128 processes. We up it to 500 when installing any database(DB2,Oracle) on AIX.
I'm not sure if the Windows environment has an equivalent parameter or what it's called.
Hope this helps.

Similar Messages

  • OGG ABEND TNS:internal limit restriction exceeded

    I Want to determine the cause..error
    Stopped Primary Extract.
    command START EXTA....
    but EXTA error occurred.
    EXTA error log ..............................................................................
    ERROR   OGG-00665  Oracle GoldenGate Capture for Oracle, exta.prm:  OCI Error during OCIServerAttach (status = 12540-ORA-12540: TNS:internal limit restriction exceeded), SQL<Not available>.
    a few minutes later starting process again. then Extract was started.
    at the time swap memoery was full.
    these phenomena are related to the OGG ?
    DB error log.................................................................................
    TNS-12500: TNS:listener failed to start a dedicated server process
    TNS-12540: TNS:internal limit restriction exceeded
      TNS-12560: TNS:protocol adapter error
       TNS-00510: Internal limit restriction exceeded
        Solaris Error: 12: Not enough space

    Thanks for comming back.
    while this issue happens login to db directly even as sysdba takes a while and could not even view listener status. I tried to kill some of the processes base on below cmd.
    ps -eaf|grep LOCAL
    then I am able to connect to db , also Listener responds.
    i also noticed queuesize was set on listener.ora and removed it , and set the trace levels to 10.
    Listener has been restarted now. Seems stable at the min.
    But i am not sure if the actuall issue has been resolved or not.
    I also checked the resource limit
    none of them reached limitation
    RESOURCE_NAME CURRENT_UTILIZATION MAX_UTILIZATION INITIAL_AL LIMIT_VALU
    processes 324 688 700 700
    sessions 335 478 1088 1088
    enqueue_locks 580 768 14380 14380
    enqueue_resources 286 314 3011 UNLIMITED
    ges_procs 0 0 0 0
    ges_ress 0 0 0 UNLIMITED
    ges_locks 0 0 0 UNLIMITED
    ges_cache_ress 0 0 0 UNLIMITED
    ges_reg_msgs 0 0 0 UNLIMITED
    ges_big_msgs 0 0 0 UNLIMITED
    ges_rsv_msgs 0 0 0 0
    gcs_resources 0 0 0 0
    gcs_shadows 0 0 0 0
    dml_locks 0 0 100 UNLIMITED
    temporary_table_locks 0 64 UNLIMITED UNLIMITED
    transactions 0 0 1196 UNLIMITED
    branches 0 1 1196 UNLIMITED
    cmtcallbk 0 6 1196 UNLIMITED
    max_rollback_segments 63 63 1196 65535
    sort_segment_locks 12 80 UNLIMITED UNLIMITED
    k2q_locks 0 0 2176 UNLIMITED
    max_shared_servers 0 0 UNLIMITED UNLIMITED
    parallel_max_servers 0 96 640 3600

  • ORA-12540 TNS Internal Limit REstriction Exceeded

    I was trying to install personal 9i on my Dell running XP. The install goes fine until it gets to creating the database and then I get ORA-12540 TNS: Internal Limit Restriction Exceeded. What am I doing wrong?

    oerr ora 12540
    12540, 00000, "TNS:internal limit restriction exceeded"
    // *Cause: Too many TNS connections open simultaneously.
    // *Action: Wait for connections to close and re-try.
    How many TNS connections you are having on your box?
    Daljit Singh

  • TNS:internal limit restriction exceeded

    Hi!
    Finding the below in listener.log
    <msg time='2013-03-28T10:15:32.927+01:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='pacspd1211'
    host_addr='10.143.10.13'>
    <txt>TNS-12518: TNS:listener could not hand off client connection
    TNS-12540: TNS:internal limit restriction exceeded
    </txt>
    </msg>
    Any suggestions pls.

    Duplicated :
    TNS-12540: TNS:internal limit restriction exceeded
    +-- locking this thread --+
    Nicolas.

  • TNS-12540: TNS: internal limit restriction exceeded

    Hi! What is this error? How can I solve this? OS is Win2k server, RDBMS is Oracle 9.2.0.1 running in a cluster enviroment (with Oracle Fail Safe installed). Any suggestions to solve the problem? Is number_of_processes parameter involved? Bye.
    Ste.

    The maximum number of processes in Oracle is limited only by the processes parameter of your init.ora or spfile. Whether the operating system is able to allocate sufficient RAM for all your processes is another story entirely. You need to figure out how much of your RAM is available to Oracle and how much you need to reserve for Oracle, subtract out the SGA you allocate to Oracle, and the remainder (assuming nothing else is on the machine) is what you can allocate to individual processes. The amount of RAM each process will require is highly variable-- depends on a number of Oracle parameters, the work each session does, etc.-- so it needs to be measured for each application. Once you measure how much RAM each process needs, and you know how much RAM is avaialble to processes, you should be able to find out roughly how many processes your system can handle. Depending on your confidence in your measurements, you probably want to reduce that maximum value by 10-20% to ensure that you're not swapping Oracle to disk.
    If you need to have more clients connected than you calculate your box can handle, you'll need to configure shared server.
    Justin
    Distributed Database Consulting, Inc.
    www.ddbcinc.com/askDDBC

  • TNS-01181: Internal registration connection limit reached

    Hi all,
    I am currently working on sun solaris box.
    My Listener log is showing this error:
    TNS-01181: Internal registration connection limit reached
    Even database is working fine:-
    Only one Perticular application is not able to connect
    with OCI error from application .
    Plz help ASAP
    Regards:-
    Deafulter

    Hi,
    what is the version of the database?
    Try to set MAX_REG_CONNECTIONS_<listener>=1000 in listener.ora
    e.g.: max_reg_connections_listener = 1000
    Hope this helps,
    Andrey

  • Wierd behavior, error #554-5.3.4 Content conversion limit(s) exceeded

    Hello
    My customer have a local Exchange 2010 SP3 installation. 
    They use a 3-party line of business application that tries to send an email with an attachment to another internal user.
    The applications uses API to open a new mail in Outlook 2010 where the email is ready to send with the recipient, body and attachment. 
    If the user presses send. They get a NDR right away. But if they remove the recipient address and type it manually again it works. 
    The NDR says 
    Diagnoseinformasjon for systemansvarlige:
    Genererende server: FS1.mydomain.local
    [email protected]
    #554-5.3.4 Content conversion limit(s) exceeded 554 5.3.4 STOREDRV.Submit.Exception:ConversionFailedException; Failed to process message due to a permanent exception with message The content conversion limit has been exceeded. ConversionFailedException: The content conversion limit has been exceeded. ##
    Opprinnelige meldingshoder:
    Received: from FS1.mydomain.local ([fe80::39d4:621:4758:d99]) by
    FS1.domain.local ([fe80::39d4:621:4758:d99%13]) with mapi id 14.03.0123.003;
    Fri, 20 Sep 2013 11:29:04 +0200
    MIME-Version: 1.0
    Content-Type: text/plain
    Date: Fri, 20 Sep 2013 11:29:04 +0200
    Message-ID: <[email protected]>
    Subject: =?iso-8859-1?Q?P=E5minnelse?=
    Ive read up on Content conversion limit(s) and tried setting different limits on my transportconfig, transportserver, receiveconnector, sendconnector etc. Without any luck.
    I see that alot of other users that get a similar NDR. Have descriptions that specify more detailed error reasons. Like for example to many attachments or to large header. But mine don't.
    So i activated Pipeline tracing and content conversation tracing. 
    This is my output
    Microsoft.Exchange.Data.Storage.ConversionFailedException: The content conversion limit has been exceeded.
    at Microsoft.Exchange.Data.Storage.ConversionAddressCollection.CreateResolutionList()
    at Microsoft.Exchange.Data.Storage.ConversionAddressCache.Resolve()
    at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.get_AddressCache()
    at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteFromHeader()
    at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeHeaders(MimeFlags flags)
    at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.ConvertItemToSummaryTnef(MimeStreamWriter writer, ConversionLimitsTracker limits, Boolean base64Encode)
    at Microsoft.Exchange.Data.Storage.ItemConversion.<>c__DisplayClassc.<InternalConvertItemToSummaryTnef>b__b()
    at Microsoft.Exchange.Data.Storage.ConvertUtils.CallCts(Trace tracer, String methodName, LocalizedString exceptionString, CtsCall ctsCall)
    at Microsoft.Exchange.Data.Storage.ItemConversion.InternalConvertItemToSummaryTnef(Item itemIn, Stream mimeOut, OutboundConversionOptions options)
    at Microsoft.Exchange.Data.Storage.ItemConversion.ConvertItemToSummaryTnef(Item itemIn, Stream mimeOut, OutboundConversionOptions options)
    OutboundConversionOptions:
    - detectionOptions: CharsetDetectionOptions:
    - preferredInternetCodePageForShiftJis: 50222
    - requiredCoverage: 100
    - preferredCharset: null
    - encodeAttachmentsAsBinhex: False
    - suppressDisplayName: False
    - internetMessageFormat: Mime
    - internetTextFormat: HtmlAndTextAlternative
    - imceaEncapsulationDomain: mydomain.no
    - preserveReportBody: True
    - byteEncoderTypeFor7BitCharsets: UseQP
    - clearCategories: True
    - owaServer:
    - logDirectoryPath: C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs\PipelineTracing
    - isSenderTrusted: True
    - dsnWriter: Microsoft.Exchange.Extensibility.Internal.DsnHumanReadableWriter
    - userADSession: Microsoft.Exchange.Data.Directory.Recipient.ADRecipientSession
    - useRFC2231Encoding: False
    - recipientCache: Microsoft.Exchange.Data.Directory.Recipient.ADRecipientCache
    - demoteBcc: False
    - useSimpleDisplayName: False
    - partialStnefConversion: False
    - resolveRecipientsInAttachedMessages: True
    - quoteDisplayNameBeforeRfc2047Encoding: False
    - filterOutPredecessorChangeList: False
    ConversionLimits:
    - maxMimeTextHeaderLength: 2000
    - maxMimeSubjectLength: 255
    - maxSize: 2147483647
    - maxMimeRecipients: 12288
    - maxBodyPartsTotal: 250
    - maxEmbeddedMessageDepth: 100
    - exemptPFReplicationMessages: True
    It is worth mentioning that the email only has 3 lines of text and the attachment is a 72 KB .tif file. Their is only one recipient. It doesn't matter what the recipient is. As long as he is the recipient from the line of business application.
    The total .msg message size is 89 KB in total. 
    Im completely stuck and appreciate every input.  

    Really sorry to say Rob that we didnt find a solution. Our client just accepted it. Both Microsoft and the application provider pointed the finger at each other. And we hope to move this customer to Office 365 instead in time. 
    Kinds regards
    Karl Jørgen Weme
    MCP
    Please remember to click “Mark as Answer” on the post that helps you, and to click
    “Unmark as Answer” if a marked post does not actually answer your question. Please
    VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

  • Posting limit restriction ( UpTO 10000) for T Code FB60 - for specific GL

    Dear All,
    Posting limit restriction ( UpTO 10000) for T Code FB60 - for specific GL
    Is it Possibal ?
    Any other way to stop Posting Amt more than Rs 10000 ( Ten Thousand)
    In specific T Code FB60
    Required urgent Help,
    Your early reply / solution is expected
    Regards,
    S Kulkarni

    Hi,
    Just go to OB28, define a validation (if you do not use one already), define one step, define the prerequisites on BSEG level of the account and define the check.
    For example, you can use the validation for the following situation: You want to make sure that postings to the expense account "Telephone costs" can only be posted to the services cost center "Telephone". You can carry out the checks needed for this by using the validation.
    Activities
    If you want to define new validations, go through the following activities:
    1. Place the cursor on a line in which company code and callup point are entered (you can enter company code and validation callup point via Edit -> New entries).
    2. Afterwards select Environment -> Validation. You reach the first screen for maintaining a validation.
    3. Select Validation -> Create. Enter the required name. After pressing ENTER, you come to an overview screen of the validation activities belonging to the validation.
    4. Select Insert entry. On the next screen you can describe a new validation activity. You describe the check requirements and the actual check for this. The syntax to be used for this is described in the online help (F1 help) for the input fields for Requirements and Check. You can also define a message (warning or error message) which is sent if the check is not successful.
    If you want to change validations which already exist, proceed as follows:
    1. Place the cursor on an already existing entry and select Goto -> Validation.
    2. On the next screen select Validation -> Display or Validation -> Change. After pressing ENTER, you get to the overview screen of the validation activities belonging to the validation. If you select Insert entry, you can carry out changes if necessary.
    Regards,
    Eli

  • Sales order is blocking while credit limit is exceeded ...

    Dear Friends ,
    Client issue  regarding credit management ,
    all customers are defined under low risk category ,
    in OVA8 transaction code we activated 
    i) For Static credit check : reaction D & status Block checked & open orders , open deliveries are blocked
    ii) For Oldest open items :  reaction D & status Block checked & days oldest item 10 days
    Issue is ,
    while creating a sales order pop-showing credit limit is exceeded but it is not blocking the sales order , some not blocking the delivery .  It is showing only pop-up for when it is in periods from 10-60 days in F.31 transaction code  . requirement is it should be blocked .
    Please respond asap ...
    thanks in advance ...

    Dear,
    Oldest open Item check works as follows.
    Say, you have set the Oldest Open Item indicator with D and Block (activated) and Days oldestItem as 1.
    Then, the system will check if there are any any open accounting documents (billing documents which accounting document is created and not cleared) - and will consider the bill due date too, and will validate, if there are any open items which has crossed the billing due date, and that cross count is greater than the one mentioned in OVA8.. If any such document is there, then it will block the sales document..
    say: Billing date: 10/10/ 2011
    Payment terms: due in 10 days
    Then, this will be treated as oldest open item after 20/10/2011..
    If you are creating document on 22/11/2011, the system will block the new order as this document exceeds the count (count in OVA8 is 1; whereas, this document is older than 2 days)..
    Hope this clarifies about oldest open item and when the system will block the sales order..
    Check in FD10n, this will show you all details clearly..
    If the credit block is set, still you are able to create delivery, check any seasonal factor or checks in financial A/R summary is maintained (if anything)..
    thank you
    Venkatesh

  • Free item gets confirmed before main item if credit limit is exceeded

    Hi,
    I am facing an issue,My stock balance is 10000,in sales order ordered main item is 11000 and free items is 1100.IF the credit limit is not activated for the customer means,Scheduled quantities is coming perfect.
    Now,The customer's credit limit got exceeded and sales order is released via vkm3 the system is confirming only free items(Tann).It's not confirming main items(Tan).
    Kindly suggest me.
    Regards,
    Prabhu.

    Hi
    The only other way i see to stop is to tick / activate complete delivery indicator in Sales Order and use incompletion procedure or make this field as mandatory in customer master but in the second case it will be applicable for all orders for customer .
    Regards
    Rohit

  • Preposition size limit was exceeded

    Hi Everyone,
    I have a preposition job that's trying to copy a folder roughly 108GB in size (comprised of subfolders and files).  I have the job running nightly and it always terminates after several hours copying about 27GB of data saying, "Preposition size limit was exceeded."  I understand that we might be running into the reserved cache limit, and I have already set the preposition to use 100% of the cache.
    My question is, if this job terminates after copying 27GB of the 108GB, what happens the next time this job starts on the next scheduled iteration the following night.  Right now, it is set to "Files changed since last preposition."  Will the preposition resume where it last Status:Terminated or will it start over since it wasn't Status:Complete task (ie. I'll never copy the full 108 GB since it keeps starting over)?
    The versions of the two WAAS devices on each end:
    Cisco Wide Area Application Services Software (WAAS)
    Copyright (c) 1999-2012 by Cisco Systems, Inc.
    Cisco Wide Area Application Services (accelerator-k9) Software Release 4.4.7 (build b4 Apr 25 2012)
    Version: nme-wae-502-4.4.7.4
    Cisco Wide Area Application Services Software (WAAS)
    Copyright (c) 1999-2012 by Cisco Systems, Inc.
    Cisco Wide Area Application Services (accelerator-k9) Software Release 4.4.7 (build b4 Apr 25 2012)
    Version: oe512-4.4.7.4
    Thanks,
    JP Babiera

    Hi JP,
    I was digging into details and i got this in user guide:
    Step 4 Ensure that the Status column shows Completed.
    If this column shows a failure, look in the Reason column for an explanation that can help you troubleshoot why the preposition task failed. After resolving the issue, you can schedule the preposition task to run again now, or wait until the scheduled start time and check the status again later
    So looking at this explanation it does seem that prepositioning should resume where it actually left off.
    For more details please visit the below link and section: Checking the Preposition Status
    http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v413/configuration/guide/filesvr.html#wp1043724
    Regards,
    Kanwal

  • How to reset site after data transfer limit is exceeded

    hi everyone
    i wonder if you can help me, i exceeded my data tranfer limit on the 9th of the month, as i published a new site many people viewed it and the limit was exceeded quickly. now it is the 16th and the site is still unavailable. why is this? can anybody help me sort this out? its just a few photos and one small video. its rather frustrating,
    thanks very much
    mac oX   Mac OS X (10.4.7)  
    mac oX   Mac OS X (10.4.7)  

    Sounds like a question for Apple/.Mac support???

  • HT1420 I use two MacBook pro, two iPads and two iPhones. Upon connection and attempt to synchronize photos I receive a message that my authorization limit is exceeded. I read that iOS devices do not count against the authorization limit.

    I use two MacBook pro, two iPads and two iPhones. Upon connection and attempt to synchronize photos I receive a message that my authorization limit is exceeded. I read that iOS devices do not count against the authorization limit. One iPhone and one iPad show in the authorization list. iTunes wants to delete my purchased programs and books from the iPad to continue synchronization. What can I do?

    Ok, now I do wish I could edit....
    I forgot to APPLY the network settings for the USB cable to work. Connected thru USB I can tether.
    So, I kept playing, and playing some more...
    I had previously unpaired everything, and gone as far as removing network devices HOWEVER...
    I didn't remove the Ethernet, Firewire or Airport Network devices.
    Now, I have done so. I REMOVED EVERYTHING
    No pairing, no network devices.
    Bluetooth was already turned off, and I rebooted.
    I turned off tethering and rebooted the iphone.
    I turned on bluetooth (on the MBP), I turned on tethering. I browsed for the iphone. It said I was already paired???? Ok, repair AGAIN, and THE IPHONE SHOWED MY BLUETOOTH TETHERING BLUE BAR at the top of the screen!
    I opened a web page, no go... d4mn, I was close...
    Opened network preferences and the created a new bluetooth PAN and voila! Internet back on the MBP. I am about to reinstall the ethernet and airport (I can live without firewire for now) and see what happens.
    Basically, the link I posted two posts ago, I had already done that, but I NEEDED to remove ethernet, firewire and airport as well...
    So MAYBE it's fixed, we'll see for how long. I'm not going to mark this as answered for now, because basically, it has failed for no reason, and I want to know why...
    Hopefully someone can come up with something, but having to delete and reinstall all pairings and network devices (to me) is not really a solution, it's a workaround (at best).

  • FAST Search - Unable to Complete Query on BackEnd resource limit remporarily exceeded code:1013

    Hi ,
    We are using FAST search in our SharePoint 2010 environment. I am encountering an issue while navigating to 21st  page or Query string value 200 and above (
    URL -> /Pages/results.aspx?k=1&s=All&start1=201
    ) in search core result web part. The error message is UI is  "
    The search request was unable to execute on FAST Search Server".
    I have found the below log in the ULS .
    SearchServiceApplication::Execute--Exception:   Microsoft.Office.Server.Search.Query.FASTSearchQueryException: Unable to   complete query on backend Resource limit temporarily
    exceeded Code:   1013   
    at Microsoft.Office.Server.Search.Query.Gateway.FastSearchGateway.GetQueryResult(IQuery   query)   
    at   Microsoft.Office.Server.Search.Query.Gateway.FastSearchGateway.ExecuteSearch(SearchRequest   request, String queryString)   
    at   Microsoft.Office.Server.Search.Query.Gateway.AbstractSearchGateway.Search(SearchRequest   request)   
    at   Microsoft.Office.Server.Search.Query.FASTQueryInternal.ExecuteSearch(SearchRequest   request, ResultTableCollection rtc)   
    at Microsoft.Office.Server.Search.Query.FASTQueryInternal.Execute(QueryProperties   properties)   
    at   Microsoft.Office.Server.Search.Administration.SearchServiceApplication.Execute(QueryProperties   properties)
    Please share your thoughts or advise if some has come across this issue. Thanks!

    Hi ,
    We are using FAST search in our SharePoint 2010 environment. I am encountering an issue while navigating to 21st  page or Query string value 200 and above (
    URL -> /Pages/results.aspx?k=1&s=All&start1=201
    ) in search core result web part. The error message is UI is  "
    The search request was unable to execute on FAST Search Server".
    I have found the below log in the ULS .
    SearchServiceApplication::Execute--Exception:   Microsoft.Office.Server.Search.Query.FASTSearchQueryException: Unable to   complete query on backend Resource limit temporarily
    exceeded Code:   1013   
    at Microsoft.Office.Server.Search.Query.Gateway.FastSearchGateway.GetQueryResult(IQuery   query)   
    at   Microsoft.Office.Server.Search.Query.Gateway.FastSearchGateway.ExecuteSearch(SearchRequest   request, String queryString)   
    at   Microsoft.Office.Server.Search.Query.Gateway.AbstractSearchGateway.Search(SearchRequest   request)   
    at   Microsoft.Office.Server.Search.Query.FASTQueryInternal.ExecuteSearch(SearchRequest   request, ResultTableCollection rtc)   
    at Microsoft.Office.Server.Search.Query.FASTQueryInternal.Execute(QueryProperties   properties)   
    at   Microsoft.Office.Server.Search.Administration.SearchServiceApplication.Execute(QueryProperties   properties)
    Please share your thoughts or advise if some has come across this issue. Thanks!

  • CTI warning: The request failed because the timeout limit was exceeded.

    hi,
    For a perticular IP Phone extension when agent is going to login using CTI agent toolkit then CTI generatin this msg "CTI warning: The request failed because the timeout limit was exceeded". but the other ph is working fine. I have deleted this phone and add againg. And the ph re-associate with PG and JTapi user. but still have the prob. For more plz see the find attached.

    Your first troubleshooting step here should be to check what JTAPI Gateway thinks is the state of that extension, you can easily check that through procmon. Here's an example from my lab.
    C:\Documents and Settings\Administrator>procmon ipcc pg1a jgw1
    >>>>jdi 2000
    >>>>
    Addr: 2000      ActiveLines: 0          RegistrationState: IN_SERVICE
            m_CurrentInvokeID = 0
            m_elapsedTPServicesRequestSeconds = 0
            queuedDTMFDigits = null
            sendingDTMFInProgress: N
            sendQueuedMsgAddCallObserverResponse: Y
            monitoredVirtualDialerPort: N
            virtualDialerPort: N
            loggedInAgent: N
            DeviceStatus : UnmonitoredDevice
            addressDeviceType : GWMSG.DEVICE_TYPE_DEVICE
            observeredTypeString : logged Out Agent Device
            isAddressRestricted: N
            addressDeviceProtocol : PROTOCOL_SCCP
            silentMonitorStatus : 0
            silentMonitoredCallID : -1
            TerminalName : SEP001BD52C547F
    The RegistrationState should be IN_SERVICE for a phone that is registered with CUCM. If you can see that the phone is registered with CUCM in it's adminsitration pages, made sure that it's in the list of associated devices, made sure you're running the correct version of the jtapi plugin and still see it as OUT_OF_SERVICE, you're probably looking at a CTI Manager defect. CSCti07947 and CSCti11651 spring to mind but there are probably a couple more.
    Most of these defects should be fixed in releases like CUCM 7.1(5), 8.0(x) and up. If the issue persists, you're probably best off opening a TAC Service Request to identify the exact cause. The PG (JTAPI Gateway) only shows you what it gets from CTI Manager, so as you can see from my above observations, you'd want to focus your troubleshooting on the CUCM end.

Maybe you are looking for

  • Discoverer Portlet Provider, No Response from Application Web Server

    I must have some odd configurable incorrect. I hope one of you can help me out and point me in the right direction. My issue involves the "Discoverer List of Worksheets" portlet. It will display all the workbooks and I can drill in and see the worksh

  • FSCM SAP 5.0 Dispute Management-record and case model-dispute cas model.xml

    Hello, I am using the W21: Dipsute Management Building Block Configuration Guide.doc At the first step, creating a case record model, the configuration guide refers to a file: 6.     In the toolbar of the Modeler in the upper middle section select Mo

  • How to buy additional 6 users license more from different vendor

    Hi If i buy 30 licenses from Vendor #1 and then later on buy additional 6 licenses from Vendor #2, do i have to pay AMC for 30 licenses to Vendor #1 and AMC for 6 licenses to Vendor #2 or pay AMC for 36 licenses to either Vendor#1 or Vendor #2. pleas

  • Download Error for digital edition 1.5?

    When I click install on the main page for adobe digital edition, it says connecting. Then it comes back saying download error and no further explanation. I retryed several times. I am logged in as administrator. I am currently running XP and I have a

  • Cannot submit batch error!

    When I go to submit a batch for compression, I get an error that says: Cannot submit batch Unable to connect to background process. Is there a way to fix this? I use Compressor 2.