TNS:Connect time out occur

Hi:
I have an error message no matter how I login for SQLplus? TNS:COnnect time out occur. from what I read it has to do witht he URL? in what way?
thanks,
Mary

Hi,
Use the CONNECT_TIMEOUT_<SID_NAME>=100 in your listener.ora.
thanks
srinivas.

Similar Messages

"connection time-out occurred" when my mac goes to sleep.

When My macbook goes to sleep I get a "connection time-out occurred" when I try to connect to the internet. and I have to restart my mac and restart the router. The is always a BT hotspot page displayed on the screen.
I have a 2011 macbook pro. This happens on my son's as well. he has the same model. he recently got a new retina display macbook and there hasn't been any problems. this doesn't happen on our phones either.
-Thanks for any help

I don't think the post can be edited after 10 or 15 minutes, what madking can do is ask host to remove it from this forum.
In addition to my own post, here are the correct link.
try to reset PRAM and SMC to refresh your macbook hardware behaviour:
http://docs.info.apple.com/article.html?artnum=2238\
http://docs.info.apple.com/article.html?artnum=303319
Good Luck

I am having Macbook Pro, I have recently tried updating my operating system to OS Yosemite, but after that its giving problem in connecting to Wifi. The error is "Connection Time out Occurred". Its getting connected by Ethernet cable.

I am having Macbook Pro, I have recently tried updating my operating system to OS Yosemite, but after that its giving problem in connecting to Wifi. The error is "Connection Time out Occurred". Its getting connected by Ethernet cable.

Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
Step 1
Turn Wi-Fi off and back on.
Step 2
Restart the router and the computer. Many problems are solved that way.
Step 3
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 4
Run the Network Diagnostics assistant.
Step 5
In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
Step 6
Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 7
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 8
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
Step 9
Reset the System Management Controller (SMC).

Cannot connect to WIFI - 'connection time out occured' but also says 'no ip address'

Hi,
I've searched the web and found endless issues with the wifi router / etc of the Imac Lion system. On the same wifi network we have a mac book (leopard I think), a pc laptop (which I am using now) and 2 phones + my brand new Imac with Lion osx. The first 4 items all connect with no problems.
I tried some of the sollutions here but it even made it worse as I now not have any connection at all!
http://support.apple.com/kb/HT4628
When I try to connect trhough systems preferences/network I get the message that my password is incorrect and that there is no IP address. Password is definitely correct. When I try to connect from the symbol in the right top corner - I get the message 'connection time out occured'
I am a bit of a Mac dummy ... any help is really appreciated.
Thanks
Billie

Hi BDAqua,
Thanks a lot for getting back to me.
Not so sure what your first questions means - or how to check this?
I tried joining other Wi-Fi network:
If I choose security 'WPA Personal' i get the message: connection time out
If I choose security 'WPA2 Personal' or 'WEP' i get the message@ no network found
hmmmm any suggestions? Thanks so much
Billie

My Mac book pro keeps saying "connection time out occurred" I have a 2011 pro with all the latest updates. It keeps doing it and it really annoys me! Please help!

My Mac book pro keeps saying "connection time out occurred" I have a 2011 pro with all the latest updates. It keeps doing it and it really annoys me! Please help!

Take each of the following steps that you haven't already tried, until the problem is resolved.
Step 1
Restart the router. Many problems are solved that way.
Step 2
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 3
From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.
Step 4
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 5
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 6
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.

Lost internet connection..."A connection time out occurred"

I've read a number of recent threads blaming Lion for lost wireless internet connections. I wish my problem was that simple.
I have an AT&T furnished Siemens SpeedStream 4100 modem connected via ethernet cable to a Netgear 3500 router providing a wireless network. This configuration worked without problem for over six months serving an iBook G4 (OS X 10.4) replaced by an iMac (OS X 10.7) in mid August, Lenovo Thinkpad (Windows 7), iPhone 3GS, and occasionally a MacBook (OS X 10.5) and a MacBook Pro (OS X 10.6). Then last week my iMac lost internet connectivity and displayed a dialog box saying:
"Could not join NETWORK NAME. A connection timeout occurred."
At the same time, my iPhone lost its WiFi connection to my network, and could not reconnect; and the Thinkpad could no longer find my wireless network.
Thinking the problem was with the Netgear router, I substituted my 6 year old Apple Airport Express in the same configuration, but with a different wireless network name. (I had used this network setup successfully for over five years before replacing the Airport Express with the Netgear router in February.) The Airport Express network worked on both computers and my iPhone for a couple of days before I again lost internet connectivity exactly as I had with the Netgear router.
I called AT&T, thinking the Siemens modem must be at fault, since a problem with that one device seemed more likely than successive failures of two different routers within a few days of each other, or a simultaneous problem with a Mac, PC and iPhone. AT&T said their modem checked out problem free. I have now connected my iMac directly to the Siemens modem with an ethernet cable and have a problem free wired internet connection.
I need my wireless network. Any thoughts on what happened to my WiFi?

AppleSince86 ... we have this same problem with a wired version of 802.1x
It appears if a user updates their password (perhaps their login screen prompts this to do this)... the underlying eapolclient will still use the old outdated password to reauthenticate upon the next x min refresh interval.
This will basically kick the user off line.
Two things could really improve this process:
1) When the operating system reauthenticates for network access... use the absolute most current version of a users password
2) Timeout handling seems much more wonky in 10.7 / 10.8 ... could probably shorten all of the timeouts up a great deal... no need to wait 30 seconds error out... in reality... if you haven't heard back in 5 seconds, you're not going to.
Unfortunately, I haven't found any configuration files to control this from our end... it appears to be the compiled behavior of the apple code

How do you avoid Connection Time Out when using Migration Assistant

Connection Time Out occurred when trying to use Migration Assistant to Transfer filess from a Windows Computer to a new iMac. What do I do to avoid this?
I've connected the Windows computer to the iMac using an ethernet cable and both computers are on the same network. When I started the transfer, it said it was copying the first file on both machines but nothing was happening. Then finally it said there was a Connection Time out. Is there anything else I need to check?

I suspect it has something to do with your network settings on your PC. I'd recommend calling AppleCare right away. you have 90 days of free AppleCare telelphone support, they can help walk you through the process. Also if you haven't already i'd strongly recommend Pondini's guide to using Migration Assistant. You can locate it by clicking:
http://www.pondini.org/OSX/Setup.html

Error occuring during manual login after idle connection time out

Hi,
I am using a PowerBuilder (v11.1) application to access Crystal Reports (BOXI Enterprise v 3.1) using Opendocument. The app server is Apache Tomcat. We have implemented SSO using Vintela and at present we have set idle connection time out to 1 hr. The problem I am facing is listed below:
The SSO Authentication works fine for accessing these reports. But when we try to run crystal reports after not using it for more than 2 hours system prompts us for login. I understand that we are getting login prompt because connection was idle for more than 1 hour but when we manually enter our login credentials it gives us an error 'An error has occured. An error occured while trying to view the document'.
However after getting the above error if we again try to run the report, it works fine.
Please can anyone provide us with some insight as to why this behaviour could be occurring. Any help would be much appreciated.

->in application connection time out is set to zero
Are you sure? There are two different can timeouts you can experience: connection timeouts and command timeouts. The link posted by Praveen is about command timeouts. The default for the connection timeout is 15 seconds and the command timeout is 30 seconds.
It is very reasonable to set the command timeout to 0, which means that wait forever. Waiting forever is less reasonable for the connection timeout. But when I think of it, I am not sure that 0 means "forever" for the connection timeout. So if you
have set it to zero, maybe that is your problem.
Else, I would suspect a network problem.
Erland Sommarskog, SQL Server MVP, [email protected]

How to solve this error :12170 TNS connection to timeout occured- req

Hi
I have 2 databases.They are source db and target db .i have created the database link source to target.The users report that when they try to connect the database source from target database using the database link they are getting the error
ORA-12170: TNS: CONNECTION TO TIMEOUT OCCURED
Note : Indpendently can be log on source database, target database from out of source db, But source db could'nt directly logon.
so how can i solve the error
pls reply urgently....
regs
RENGA

ORA-12170: TNS: CONNECTION TO TIMEOUT OCCUREDWhen was last time this worked?
What changed?
What OS name & version involved on each system?
12170, 00000, "TNS:Connect timeout occurred"
// *Cause: The server shut down because connection establishment or
// communication with a client failed to complete within the allotted time
// interval. This may be a result of network or system delays; or this may
// indicate that a malicious client is trying to cause a Denial of Service
// attack on the server.
// *Action: If the error occurred because of a slow network or system,
// reconfigure one or all of the parameters SQLNET.INBOUND_CONNECT_TIMEOUT,
// SQLNET.SEND_TIMEOUT, SQLNET.RECV_TIMEOUT in sqlnet.ora to larger values.
// If a malicious client is suspected, use the address in sqlnet.log to
// identify the source and restrict access. Note that logged addresses may
// not be reliable as they can be forged (e.g. in TCP/IP).Edited by: sb92075 on Oct 20, 2010 6:53 AM

ActionInbox connection time out

Hi all,
   When we login to our srm system and click strategic Purchasing.
   Then the view 'Work Overivew' display and it show me an info
   'No items found to display'. And following is a warning 'An error
   occurred while trying to connect to the provider.
   Then click for details, it show follow logs:
An error occurred while trying to connect to the provider
Connection Status
System      Connector                           Last Access Date              Status Message
SAP_SRM     WebFlowConnector        Aug 10, 2010 3:02:38 PM       Successful
AdHocSystem AdHocWorkflowConnector Aug 10, 2010 3:02:38 PM       Successful
ActionInbox ActionInboxConnector    Aug 10, 2010 3:03:08 PM       timeout Time out occured. Time taken is more than 30 seconds
Can somebody tell me why it try to connect to the system ActionInbox?
How and where to configrate it ?
Best Regards,
terry

Deactive the system ActionInbox it is ok.

How to increase database connection time out?

Connection con = DriverManager.getConnection(.......
If we use this con object, let say, after 5 hours, then exception occurs because connection has been closed. So how can we increase its connection time out so that we can use the same connection, let say, after 2 days?

You don't want to keep a connection open for 2 days, use a connection pool.
http://jakarta.apache.org/commons/dbcp/

Getting Connection Time out while connecting and with tnsping

Hello Experts,
I am new to Oracle world, so please go easy on me.
I installed Oracle 11 XE on Centos 6.4 VM. followed the official installation procedure and database was installed without any errors.
I am able to login to database through sqlplus and able to run sql queries.
Problem comes when i am trying to connect from sql developer or external application. i get Connection Time out error.
Below are the tnsnames.ora and listener.ora file content
# tnsnames.ora Network Configuration File:
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = basevm)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
# listener.ora Network Configuration File:
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = /u01/app/oracle/product/11.2.0/xe)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
      (ADDRESS = (PROTOCOL = TCP)(HOST = basevm)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
lsnrctl stat shows service stats as UNKNOWN and tnsping also fails
bash-4.1$ lsnrctl stat
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 11-JUN-2013 02:00:48
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date                10-JUN-2013 19:39:03
Uptime                    0 days 6 hr. 21 min. 45 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Default Service           XE
Listener Parameter File   /u01/app/oracle/product/11.2.0/xe/network/admin/listener.ora
Listener Log File         /u01/app/oracle/diag/tnslsnr/sagbase/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=basevm)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
bash-4.1$ tnsping xe
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 11-JUN-2013 02:01:16
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = basevm)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE)))
TNS-12535: TNS:operation timed out
I am stuck and don't know where else to check.
Could you guys please help me out here?
Thanks.

That tnsping error indicates several possible problems, most related to the setup for the client. Or network setup on the database server host.
Connecting to a database using sqlnet requires three things, the database host, the listener port, and the ORACLE_SID or instance SERVICE_NAME.
The tnsping utility is only concerned with the first two items, host and port. It will not perform an actual connection, and will not verify the tnsalias ORACLE_SID or SERVICE_NAME values.
An "OK" result from tnsping verifies that the specified host has a listener running at the specified port and it is servicing connections.
Since you're not getting an "OK" from tnsping, could be something is blocking the connection (i.e. firewall), the host= specification is not correct, or the port= spec is not correct. Note that host= must either be a valid and correct hostname, or a an IPv4 address. If IPv6 is in the mix, only the correct hostname will work. A hostname that resolves correctly.
Look at your network interface setup on the host, find its IP address, make sure the IP will `ping`, and try a new sqlnet.ora entry with the IPv4 address.
ifconfig -a
<interface>: flags=...
inet n.n.n.n
# in sqlnet.ora:
xe2 = ... host=n.n.n.n ...
tnsping xe2
... ok? ...

ORA-12535 TNS:Operation time Out and ORA-12154:TNS Could not resolve servic

Greetings!!!
I have installed my Oracle Database 10g & Developer Suite 10g in Windows XP Pro Machine. Oracle Application Server 10g is also installed in Windows 2003 Server machine.Both machine have different domain.When using Form Developer Suite OC4J to run my form program, i can connect to the database properly run the form perfectly.
Problem encountered.
When I tried to run the form using Application Server 10g(installed in Windows 2003 Server), I got an error ORA-12154:TNS Could not resolve service name when connecting to the database and I got an error ORA-12535 TNS:Operation time Out when using TNSPing. I checked both the configuration of TNSNAMES.ORA(database & Application SErver) using the same port & service name but still got the same error.
Hope somebody can help me out there...
Many thanks in advance.
Regards,
BTF

I have seen this before with my setup, I found that I had to go into the net configuration assistant, and change my host name to the fully qualified name, example: my compuer name is computer1, I had to enter in computer1.OIT.Docfinity.com for it to take. That has always gotten me past that TNS error, just my 2 cents, hope it helps.
keep on keeping on.

[SOLVED] Pacstrap connection time-out

SOLUTION: Don't be a newbie like me and not know what DNS stands for. What I did to solve my problem was simply modify my /etc/resolv.conf to point to 8.8.8.8 instead of my default gateway.
G'day everyone, I apologize in advance for my lack of experience.
I understand this distribution is not for beginners, but I personally love steep learning curves as it provides the most enjoyable and interesting experience for me.
It's also the fastest way to learn.
Albeit, I have yet to even successfully install Arch!
I'm a little put off, but I've already deleted my Windows partition so now I am committed.
Anyways, so I've been following the absolutely wonderful Beginner's guide. But I seem to have made some huge mistake, or something is terribly wrong.
I'm only upto the part where it suggest typing "pacstrap /mnt base base-devel".
However when I put that command in, I am eventually returned with:
1 root@archiso ~ # pacstrap mnt base base-devel
==> Creating install root at /mnt
==> Installing packages to /mnt
warning: database file for 'core' does not exist
: : Synchronizing package databases...
error: failed retrieving file 'core.db' from mirror.aarnet.edu.au : Connection time-out
error: failed retrieving file 'core.db' from ftp.iinet.net.au : Connection time out
Etc etc. I tried using the original Mirrorlist and that gave me back 30 odd different server connection time outs. So I switched to just the Australian servers. It managed to download the 'extra' and 'community' packages when I swapped (they weren't downloading earlier either).
I've done a bit of searching (probably not enough) but I'm about to head off to sleep as it's almost midnight and I have work tomorrow. So I figured there's no harm in posting as that gives people many hours to respond. What I did find in my searching was that things like this occur when iPv6 is enabled. Unfortunately I don't have the luxury of restarting (or so I believe), because as you may have seen I'm actually trying to still install! So I'm a little stuck? Any help at all is appreciated, even if it's like
ArchLinuxPro wrote:Get out of here, you are too noob, go look at *insert easy way to learn Arch Linux here*.
Thanks,
Aaron.
Last edited by Ikbosh (2012-09-23 16:41:37)

ajaykumar wrote:
Hi lkbosh,
Ikbosh wrote:Although, I started Arch up into a VM environment and had no issues installing base and base-devel.
I think you can use those installed packages in order to install into your home computer. Please go through the following link
Custom Local Repository - Howto
I think it might help you in easy-install
With regards,
Ajay Kumar G
Unfortunately there's no way for me to connect to this VM remotely from home. Our work network is locked up pretty tight.
DSpider wrote:Or try the link above that: https://wiki.archlinux.org/index.php/Pa … _USB_stick
I'd do that, but I'm too far away from getting a running Arch linux inside my VM (Ended up having to do work most of the day ), let alone enough time to configure Guest Additions
plustwo wrote:
can you ping google.com?
you might also check your /etc/resolve.conf.
and are going through a proxy perhaps?
tnx
Prior to deleting
inet 192.168.2.232/24 brd 192.168.2.255 scope global eth0
I was able to ping google. My "/etc/resolve.conf" pointed to my router and there are definitely no proxies that I'm going through.
Off topic: Also, I just found out they are allowing pre-loading of Borderlands 2 D:
I think I might have to just grab another SSD from here at work and use that for Linux.
Because I deleted Windows 8 off my current SSD because it was being an arse and not letting CFDISK or Parted or GParted (Ubuntu Live) from seeing the partitions (I gave Arch ~10GB to mess with on the SSD and ~100GB on my HDD).
Last edited by Ikbosh (2012-09-18 08:57:12)

Itunes update to firmware fails, because connection times out.

I have been unsuccessfully attempting to update my iphone 3gs and ipad to iOS 5 for over a month now. I have spent many, many hours on this, and many phone calls to apple support. I disable Norton 360, and windows firewall, and my firewall on my router. I've tried updating my router's firmware, which bricked the router--thanks apple for insisting this was the problem, and I have replaced the router, with a new one. Itunes diagnostics gives me the following information. I am using itunes as the administrator in Windows 7, 64 bit, although itunes doesn't recognize it, unless I reinstall it as the administrator, but then once I restart the computer, itunes no longer recognizes that I using Windows as an admin.
Also, the firmware cannot update, because the connection times out, despite all my firewalls, and antivirus being turned off.
I've tried downloading iOS 5 and then updating using restore, but that didn't work. I've poured through support forums, and error codes: I get 1611, etc. Cannot seem to resolve this.
Any ideas?
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.2.0
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 0040A7BC031F98E0
Current user is not an administrator.
The current local date and time is 2011-11-15 11:35:00.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 4800 Series
**** External Plug-ins Information ****
No external plug-ins installed.
The drive F: HL-DT-ST DVDRAM GP08LU30 Rev 1.00 is a USB 1 device.
iPodService 10.5.0.142 (x64) is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {01DC2EA3-0DD0-4A51-80A6-7B414E4C6291}
Description:          Realtek PCIe GBE Family Controller
IP Address:          192.168.2.2
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.2.1
DHCP Enabled:          Yes
DHCP Server:          192.168.2.1
Lease Obtained:          Tue Nov 15 11:32:39 2011
Lease Expires:          Tue Nov 15 11:32:38 2011
DNS Servers:          192.168.2.1
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
SSL 3.0 Support:          Enabled
TLS 1.0 Support:          Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-15 11:33:52.

Disable your firewall/security software and try again.

TNS:Connect time out occur

Similar Messages

Maybe you are looking for