TNS: no such protocol, TNS: no listener
Hi OTn,
Where can I use the port no. 9000 and Sockets as protocol, in the form server setup?
I am no able to the provision for typing the above said. What mistake, I have made!?
And when I use the Start >Net8 Easy Config, for testing the connection, I used to get repeated errors like,
TNS: no listener
TNS: no such protocol adaptor
TNS: could not resolve the servise name
What is the remedy for this?
Pls help.
Thank you,
Maha ([email protected])
null
Start the database listener on your database server: lsnrctl start.
Similar Messages
-
Patch6: paradox-ORA 12222 TNS : no such protocol adopter
getting a ORA 12222 TNS : no such protocol adopter found
after installing patch 6 over existing oracle 9i AS 1.0.2.0.0
and forms 6i and reports 6i server,when we are running the test form with all the settings required for running forms as servlets tesst forms is coming successfully.But when with the same parameter we are running our form which makes databse connection gives the above ORA error 12222.
to ensure that it is not a protocol adapter problem we remove one line
;serverURL= ---- this line is commented-----
serverURL=/servlet/oracle.forms.servlet.ListenerServlet
and put instead
serverURL=
;serverURL=/servlet/oracle.forms.servlet.ListenerServlet ---this line is commented ----
After replacing again we tried to run the test.fmx as well as our form.Both were running successfully.
Since this one line change made Listener Servlet inactive and forms listerner as active component.
looking at the above situation we came to conclusion that it should not be a TNS protocol adaptor probel. so there must be either some problem with the configuration or some probelem with the patch 6 itself.
(we would like to mention that earlier we did same thing with patch 5 and getting error FRM-92100.This error was resolved when we used patch 6 with one additional line
in formsweb.cfg
as "networkRetries=30" )
we are using windows 2000
nullA few more facts..
while installing we had done a custom install for patch 6 .Druing this a error came up as
a wrtie error while trying to copy NLSRTL33.DLL while installing server patch component during custom install.
does anyone out there know .. what this DLL is for.
Regards
Sunil choudhary -
TNS-12541: TNS:no listener TNS-12560: TNS:protocol adapter error TNS-00511: No listener
Dear Team,
When I am trying to start my LISTENER on my Windows server manually its showing error like The OracleOraDb11g_home1TNSListener service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.I Have created LISTENER twice also.When I am checking status on CMD prompt below is error is showing.Please help me out how to solve the issue.
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<host name>)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC0)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Regards,
Praveen KHi,
Did you check whether the windows service for listener is up and running? if not please start it, by typing "services.msc" in run window and start the service. Then check whether you have listener.ora file in $ORACLE_HOME/network/admin and also post listener.ora contents.
Regards,
Pradeep. V -
Hi,
In order to solve the JVM problem because of the max length directory name problem (which i read about in the forum
Re: How to lock entire schema?
i installed the oracle designer 6i into c:\odes6i folder as indicated in the above forum answer,
but now, when i want to connect i am getting the error message :
ORA-12222: TNS:no such protocol adapter
RME-00220: Failed to connect to Repository
Does somebody know the solution for this? (i also install the needed drivers)
Thanks in advance,
C|neyt UsluPlease find below the output.
$ lsnrctl services
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 03-APR-2012 06:08:23
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=VM.xxx.com )(PORT=1525)))
The listener supports no services
The command completed successfully
$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 03-APR-2012 06:13:18
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=VM.xxx.com )(PORT=1525)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 02-APR-2012 02:51:12
Uptime 1 days 3 hr. 22 min. 5 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle11g/o11gr22/app/o11gr22/product/11.1.0/db_1/network/admin/listener.ora
Listener Log File /oracle11g/o11gr22/diag/tnslsnr/VM/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=VM.xxx.com )(PORT=1525)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1525)))
The listener supports no services
The command completed successfully
$ cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
10.123.256.177 VM.xxx.com VM VM.in.oracle.com
Gowtham -
ORA-12222 : TNS:No such protocol adapter -error
Hi
when i try to connect database from forms builder i get the below error.
ORA-12222 : TNS : No such protocol adapter. I refered many forums and help sites... i checked everyting in my system. like Regedit and environment variable.
still i am getting the same error. kindly help to resolve this issue.
Please find the below details of my desktop, form builder and Oracle database.
Desktop OS
Operating system : WINDOWS XP (professional) version 2002 service pack 3
Oracle Database
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Oracle database installed in Linux server
linux server details
Linux VM177 2.6.18-194.0.0.0.3.el5xen #1 SMP Mon Mar 29 18:27:00 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
any rpm are required in Linux server resolve this issue.
my linux server i couldn't find any rpms OPENM*
$ rpm -qa openm*
$
Oracle forms builder
Forms [32 Bit] Version 6.0.8.24.1 (Production)
Oracle Toolkit Version 6.0.8.24.0 (Production)
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #1459 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 6.0.7.1.0 - Production
Oracle Virtual Graphics System Version 6.0.5.38.0 (Production)
Oracle Tools GUI Utilities Version 6.0.8.20.1 (Production)
Oracle Multimedia Version 6.0.8.20.0 (Production)
Oracle Tools Integration Version 6.0.8.18.0 (Production)
Oracle Tools Common Area Version 6.0.8.18.0
Oracle CORE Version 4.0.6.0.0 - Production
Thanks in advance. your early reply will be very much appriciated.
GowthamPlease find below the output.
$ lsnrctl services
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 03-APR-2012 06:08:23
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=VM.xxx.com )(PORT=1525)))
The listener supports no services
The command completed successfully
$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 03-APR-2012 06:13:18
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=VM.xxx.com )(PORT=1525)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 02-APR-2012 02:51:12
Uptime 1 days 3 hr. 22 min. 5 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle11g/o11gr22/app/o11gr22/product/11.1.0/db_1/network/admin/listener.ora
Listener Log File /oracle11g/o11gr22/diag/tnslsnr/VM/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=VM.xxx.com )(PORT=1525)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1525)))
The listener supports no services
The command completed successfully
$ cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
10.123.256.177 VM.xxx.com VM VM.in.oracle.com
Gowtham -
Hai,
When i tried to start lsnrctl>start
i got the following error messages please if some one could resolve my problem it is very urgent
LSNRCTL> start
Starting /usr2/oracle/u01/app/oracle/product/8.1.6/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 8.1.6.0.0 - Production
System parameter file is /usr2/oracle/u01/app/oracle/product/8.1.6/network/admin/listener.ora
Log messages written to /usr2/oracle/u01/app/oracle/product/8.1.6/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC)))
Attempted to listen on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=dbserver)(PORT=1521)))
TNS-12538: TNS:no such protocol adapter
TNS-12560: TNS:protocol adapter error
TNS-00508: No such protocol adapter
null<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Anand Sengodan ([email protected]):
Hai,
When i tried to start lsnrctl>start
i got the following error messages please if some one could resolve my problem it is very urgent
LSNRCTL> start
Starting /usr2/oracle/u01/app/oracle/product/8.1.6/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 8.1.6.0.0 - Production
System parameter file is /usr2/oracle/u01/app/oracle/product/8.1.6/network/admin/listener.ora
Log messages written to /usr2/oracle/u01/app/oracle/product/8.1.6/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC)))
Attempted to listen on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=dbserver)(PORT=1521)))
TNS-12538: TNS:no such protocol adapter
TNS-12560: TNS:protocol adapter error
TNS-00508: No such protocol adapter
<HR></BLOCKQUOTE>
Would probably have to see your listener.ora to know for sure but two things I would look for: AFAIK you can use either tcp or udp for the PROTOCOL= statement in the listener.ora, the Oracle Listener listens on port 1521 so you should add port 1521 to your SERVICES file in the /etc directory. See if either of those help any..
dmm
null -
TNS-12538: TNS:no such protocol adapter
hi, i'm a newbie for oracle... now I face some problem while i try to create database.
After i installed Oracle 10g on Solaris 10x86-64, I created listener.ora by using netca.
but I cannot start it. error shown as
$ lsnrctl start
TNSLSNR for Solaris: Version 10.2.0.3.0 - Production
System parameter file is /oracle/ZTDB3/bin/oracle10/product/10.2.0/network/admin/listener.ora
Log messages written to /oracle/ZTDB3/bin/oracle10/product/10.2.0/network/log/listener.log
TNS-01150: The address of the specified listener name is incorrect
TNS-01153: Failed to process string: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.104.131.92)(PORT=1524)))
Listener failed to start. See the error message(s) above...
$ lsnrctl status
LSNRCTL for Solaris: Version 10.2.0.3.0 - Production on 12-SEP-2008 10:05:30
Copyright (c) 1991, 2006, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.104.131.92)(PORT=1524)))
TNS-12538: TNS:no such protocol adapter
TNS-12560: TNS:protocol adapter error
TNS-00508: No such protocol adapter
how can I fix this problem? also I cannot sqlplus / as sysdba
error shown as
$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Sep 12 10:28:56 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
ERROR:
ORA-12157: TNS:internal network communication error
please help me...thank you.Hi Rajesh Vig
Thank for your help.
I did change follow your advice. But it doesn't work at all.
However, before finishing configured listener, something warn me as popup message.
"The information provided for this listener is currently in use by other software on this computer.
You can proceed with the configuration as it is, but it will not be possible to start this listener until
the conflict is resolved."
I'm so doubt, what wrong with my listener. Why did oracle warn me that my listener was conflict with another. Although, there was no listener.ora at that time. ?????
Here is my new listener.ora created by netca.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/ZTDB3/bin/oracle10/product/10.2.0)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.104.131.92)(PORT = 1530))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
$ lsnrctl start
TNSLSNR for Solaris: Version 10.2.0.3.0 - Production
System parameter file is /oracle/ZTDB3/bin/oracle10/product/10.2.0/network/admin/listener.ora
Log messages written to /oracle/ZTDB3/bin/oracle10/product/10.2.0/network/log/listener.log
TNS-01150: The address of the specified listener name is incorrect
TNS-01153: Failed to process string: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ztdb3)(PORT=1530)))
Listener failed to start. See the error message(s) above...
$ netstat -an | grep 1530
no result shown up.
If you have found something wrong, please advise me. Thank you. -
TNS-12538: TNS:no such protocol adapter, please delete this thread, Sorry!
Hello,
I am trying to install oracleAS Infrastructure and portal on my windows xp pc,
At some point of the installation for Internet Directory Configuration Assistant, there is an error:
===========================================================
Output generated from configuration assistant "Internet Directory Configuration Assistant" (attempt 2):
Myinfra.mypcname.domainname
java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionat oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
===========================================================
After did some searching, I find I may need to install MS loopback adapter.
So I followed http://support.microsoft.com/kb/839013 to install the MS Loopback adapter.
After I installed, When I open the Network Connetcions, I found there are two local area connetcions. One of then called local area connection 2, and it's MS loopback adapter. I got a warning for local area connection 2, it says that my pc does not have a IP address assigned, and its status is : limited or no connectivity .
I tried to repair to establish the full connection by clicking on the repair button, but the process is failed.
I also tried to run command: tnsping orcl ( orcl is my database service name )
tnsping orcl, still got this error:
======================================================
C:\>tnsping orcl
TNS Ping Utility for 32-bit Windows: Version 9.0.1.4.1 - Production on 16-MAR-20
06 22:41:35
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
E:\oracle\product\10.1.0\Db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =mypcname.mydomainname)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = o
rcl)))
TNS-12538: TNS:no such protocol adapter
===================================================
btw. my pc IP was assigned by DHCP, and pc host name is something like: abcd.abc.edu
Q1. I am wondering which local area connection is currently used by default ? If it's the old one, how to configure it to use the new added one? ( local area connetcion 2 )
Q2. Do I have to install MS Loopback adapter ? I don't have a fixed IP, however my IP is seldom changed. And I'm ok with 127.0.0.1
Any suggestion ?
Thanks for your reply,
EmilyHi Rajesh Vig
Thank for your help.
I did change follow your advice. But it doesn't work at all.
However, before finishing configured listener, something warn me as popup message.
"The information provided for this listener is currently in use by other software on this computer.
You can proceed with the configuration as it is, but it will not be possible to start this listener until
the conflict is resolved."
I'm so doubt, what wrong with my listener. Why did oracle warn me that my listener was conflict with another. Although, there was no listener.ora at that time. ?????
Here is my new listener.ora created by netca.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/ZTDB3/bin/oracle10/product/10.2.0)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.104.131.92)(PORT = 1530))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
$ lsnrctl start
TNSLSNR for Solaris: Version 10.2.0.3.0 - Production
System parameter file is /oracle/ZTDB3/bin/oracle10/product/10.2.0/network/admin/listener.ora
Log messages written to /oracle/ZTDB3/bin/oracle10/product/10.2.0/network/log/listener.log
TNS-01150: The address of the specified listener name is incorrect
TNS-01153: Failed to process string: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ztdb3)(PORT=1530)))
Listener failed to start. See the error message(s) above...
$ netstat -an | grep 1530
no result shown up.
If you have found something wrong, please advise me. Thank you. -
"ORA-12222 TNS no such protocol adapter" When running Forms after installing Portal
We have a Forms 6i (web) application running on 9iAS. This worked fine. But after installing Portal on the same 9iAS, we got the following error when starting the WebForms application:
ORA-12222 TNS no such protocol adapter
Who knows a solution?
Configuration
9IAS v1.0.2.2
8.1.7
Form 6i Patch 10
Windows NT
Best regards,
Harm van ZoestThis is s SQLNET error.
You can search for it on OTN using the search button.
IT usually means that the tnsnames.ora file was changed. Or that you are now using another tnsnames.ora. -
TNS-12538: TNS:no such protocol adapter, and install MS loopback adapter
Hello,
I am trying to install oracleAS Infrastructure and portal on my windows xp pc. (Oracle Application Server 10g Release 2 (10.1.2)
At some point of the installation for Internet Directory Configuration Assistant, there is an error:
===========================================================
Output generated from configuration assistant "Internet Directory Configuration Assistant" (attempt 2):
Myinfra.mypcname.domainname
java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionat oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
===========================================================
After did some searching, I find I may need to install MS loopback adapter.
So I followed http://support.microsoft.com/kb/839013 to install the MS Loopback adapter.
After I installed, When I open the Network Connetcions, I found there are two local area connetcions. One of then called local area connection 2, and it's MS loopback adapter. I got a warning for local area connection 2, it says that my pc does not have a IP address assigned, and its status is : limited or no connectivity .
I tried to repair to establish the full connection by clicking on the repair button, but the process is failed.
I also tried to run command: tnsping orcl ( orcl is my database service name ), after installed the loopback adapter.
tnsping orcl, still got this error:
======================================================
C:\>tnsping orcl
TNS Ping Utility for 32-bit Windows: Version 9.0.1.4.1 - Production on 16-MAR-20
06 22:41:35
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
E:\oracle\product\10.1.0\Db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =mypcname.mydomainname)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))
TNS-12538: TNS:no such protocol adapter
===================================================
btw. my pc IP was assigned by DHCP, and pc host name is something like: abcd.abc.edu
Q1. I am wondering which local area connection is currently used by default ? If it's the old one, how to configure it to use the new added one? ( local area connetcion 2 ).
Q2. Do I have to install MS Loopback adapter for installing Oracle Application Server 10g Release 2 (10.1.2)?
I don't have a fixed IP, however my IP is seldom changed. And I'm ok with 127.0.0.1
Any suggestion ?
Thanks for your reply,
EmilyHello,
I am trying to install oracleAS Infrastructure and portal on my windows xp pc. (Oracle Application Server 10g Release 2 (10.1.2)
At some point of the installation for Internet Directory Configuration Assistant, there is an error:
===========================================================
Output generated from configuration assistant "Internet Directory Configuration Assistant" (attempt 2):
Myinfra.mypcname.domainname
java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionat oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
===========================================================
After did some searching, I find I may need to install MS loopback adapter.
So I followed http://support.microsoft.com/kb/839013 to install the MS Loopback adapter.
After I installed, When I open the Network Connetcions, I found there are two local area connetcions. One of then called local area connection 2, and it's MS loopback adapter. I got a warning for local area connection 2, it says that my pc does not have a IP address assigned, and its status is : limited or no connectivity .
I tried to repair to establish the full connection by clicking on the repair button, but the process is failed.
I also tried to run command: tnsping orcl ( orcl is my database service name ), after installed the loopback adapter.
tnsping orcl, still got this error:
======================================================
C:\>tnsping orcl
TNS Ping Utility for 32-bit Windows: Version 9.0.1.4.1 - Production on 16-MAR-20
06 22:41:35
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
E:\oracle\product\10.1.0\Db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =mypcname.mydomainname)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))
TNS-12538: TNS:no such protocol adapter
===================================================
btw. my pc IP was assigned by DHCP, and pc host name is something like: abcd.abc.edu
Q1. I am wondering which local area connection is currently used by default ? If it's the old one, how to configure it to use the new added one? ( local area connetcion 2 ).
Q2. Do I have to install MS Loopback adapter for installing Oracle Application Server 10g Release 2 (10.1.2)?
I don't have a fixed IP, however my IP is seldom changed. And I'm ok with 127.0.0.1
Any suggestion ?
Thanks for your reply,
Emily -
Designer6i - can't connect database TNS:no such protocol adapter
Cannot connect to database with Repository Administration Utility.
I have installed Oracle8i Enterprise Edition Release 2 on my WindowsNT in one oracle_home (ora8i) and Designer 6i in the same machine in another oracle_home (orades which is DEFAULT_HOME).
Installation is successful. I have set up the tnsnames.ora file in the directory d:\orades\net80\admin. I have also set the registry variables \HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\TNS_ADMIN
and
\HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\Home1\TNS_ADMIN
to d:\orades\net80\admin as per Installation Guide.
From ora8i->DatabaseAdministration->DBA Studio I can connect to the database using the service string in the above tnsnames.ora file.
But it fails from OracleRepository6i-> RepositoryAdministrationUtility with an error of ORA-12222: TNS:no such protocol.
The TCP network protocol is installed for Designer6i as the folder "tnsapi" exists in orades\net80.
Can anyone please point out what is wrong and help? thanksHi PAUL,
I think you first install designer and then Oracle.
Kavita
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Paul Kwok ([email protected]):
Cannot connect to database with Repository Administration Utility.
I have installed Oracle8i Enterprise Edition Release 2 on my WindowsNT in one oracle_home (ora8i) and Designer 6i in the same machine in another oracle_home (orades which is DEFAULT_HOME).
Installation is successful. I have set up the tnsnames.ora file in the directory d:\orades\net80\admin. I have also set the registry variables \HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\TNS_ADMIN
and
\HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\Home1\TNS_ADMIN
to d:\orades\net80\admin as per Installation Guide.
From ora8i->DatabaseAdministration->DBA Studio I can connect to the database using the service string in the above tnsnames.ora file.
But it fails from OracleRepository6i-> RepositoryAdministrationUtility with an error of ORA-12222: TNS:no such protocol.
The TCP network protocol is installed for Designer6i as the folder "tnsapi" exists in orades\net80.
Can anyone please point out what is wrong and help? thanks
<HR></BLOCKQUOTE>
null -
Database link : TNS-12538: TNS:no such protocol adapter
I have created a database link on schema1:
CREATE public DATABASE LINK db_link
CONNECT TO schema2 IDENTIFIED BY schema2
USING 'schema2' (service name);
While I am testing this link to access the object of schema 2 on schema1
i am getting error:TNS-12538: TNS:no such protocol adapter
In tnsnames.ora file of schema1,i have also included the details for schema2.
Please tell me the solution of this problem
Thanks in advanceHi,
Can you ping the schema2 which is another DB or can you connect to schema2 DB with the service which you have used for DB link.
Check that first functioning correct or not.
Check this link.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/ds_admin.htm#sthref4108
Pavan Kumar N -
Dear Team,
When I am trying to start my LISTENER on my Windows server manually its showing error like The OracleOraDb11g_home1TNSListener service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.I Have created LISTENER twice also.When I am checking status on CMD prompt below is error is showing.Please help me out how to solve the issue.
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<host name>)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC0)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Regards,
Praveen Khi,
first be sure that oracle database service and listener service are started as same OS username and this user was in the list of group oracle dba
second stop all services and delete all listeners using netca and delete all files(listener.ora, tnsnames.ora) from network\admin\ folder
after create new listener using netca and check hostname in listener.ora, if everything is ok create new connection string in tnsnames .ora and then do following commands on cmd and put here result.
lsnrctl stop
lsnrctl start
lsnrctl status
tnsping myDb
Ramin Hashimzade -
TNS-12541: TNS:no listener after 10g DB installation
After installing Oracle 10g DB on my PC (Windows XP), I went to SQLPLUS, but when I connected using system user, it gave me an error:
TNS-12541: TNS:no listener
Then, I tried to check the status of the listener as below.
D:\oracle\product\10.1.0\Db_2\BIN>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.1.0.2.0 - Pro
:34
Copyright (c) 1991, 2004, Oracle. All rights reserv
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(K
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or director
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(H
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
Not sure what is going on here. Any pointers ?Set the enviroment variable ORACLE_HOME , ORACLE_SID
and then issue lsnrctl status
D:\oracle\product\10.1.0\Db_2\BIN>lnsrct status -
TNS: no listener when trying to perform Import
Hi,
Inspite of the listener running fine (tested both on the server and client via tnsping) while trying to perform import it is terminating throwing an error
Could you tell me where could be the problem? And why am I unable to perform my import.
Import: Release 8.1.7.4.1 - Production on Wed Feb 22 05:44:18 2012
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Password:
IMP-00058: ORACLE error 12541 encountered
ORA-12541: TNS:no listener
IMP-00000: Import terminated unsuccessfullyMy oracle database is a 8i database.
Even while trying to connect using svrmgrl
C:\>svrmgrl
Oracle Server Manager Release 3.1.7.0.0 - Production
Copyright (c) 1997, 1999, Oracle Corporation. All Rights Reserved.
ORA-12541: TNS:no listener
SVRMGR> exit
Server Manager complete. All the environment variables are also properly set. Also please find the listener status as below:
C:\>lsnrctl status LISTENER_ABC
LSNRCTL for 32-bit Windows: Version 8.1.7.4.0 - Production on
(c) Copyright 1998 Oracle Corporation. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<gave-the IP address of the host>
STATUS of the LISTENER
Alias LISTENER_ABC
Version TNSLSNR for 32-bit Windows: Version
Start Date 22-FEB-2012 05:41:21
Uptime 0 days 0 hr. 12 min. 40 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File D:\Oracle\ora817\network\admin\listener.ora
Listener Log File D:\Oracle\ora817\network\log\listenener_ABC.log
Services Summary...
ABC has 1 service handler(s)
The command completed successfully
C:\>echo %ORACLE_HOME%
D:\Oracle\ora817
C:\>echo %PATH%
D:\Oracle\ora817\bin;E:\Oracle\Forms6i\bin;C:\Perl\bin\;C:\Per
;D:\Oracle\10as\bin;E:\Oracle\10as\jlib;E:\Oracle\Forms10g\jdk
\Apache\Perl\5.00503\bin\mswin32-x86;C:\WINNT\system32;C:\WINN
C:\>echo %TNS_ADMIN%
D:\Oracle\ora817\network\admin
C:\>echo %ORACLE_SID%
ABC find the below TNS entries:
ABC,ABC.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = <gave the ip address of host>)(PORT = 1522) ) )
(CONNECT_DATA =
(SID = ABC)
)find the below listener file:
LISTENER_ABC =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =<gave the ip address of the hosT>)(PORT = 1522))
SID_LIST_LISTENER_ABC =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = ABC)
(ORACLE_HOME = D:\Oracle\ora817)
(SID_NAME =ABC)
)It has a single home.
C:\>lsnrctl services
LSNRCTL for 32-bit Windows: Version 8.1.7.4.0 - Production on 22-FEB-2012 06:13:48
(c) Copyright 1998 Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=tcp)(PORT=1521))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown errorWhen I just tried,
the tnsping on the server is throwing a no listener error.
the tnsping on the client is working fine .. but taking 3640msec to respond.
Maybe you are looking for
-
Can't use append with JTextPane?
One of my projects requires me to post information into a text box sort of a results box. The info keeps getting added so it's not a one time thing. The first line shows the user input in black and the second line is the system response and is indent
-
Hello Everyone, I'm fairly new to this and hope soneone can help me, I'm trying to input a few photos into a DVD project but when I open the media files and selec photos I get the message I that I need to open Iphot 2 or later to populate this sectio
-
Hi everyone!! I've had the same problem for months. My notebook is freezing a bit sometimes. It annoys me as **** and i've tried to figure out how i fix it but without any soulation. I've been reading about others with same symptomes and it seemes to
-
Login problem in application in APEX 4.0
Hi All, Im new to this apex tool...currently i created a DB application with 3 pages....... *) login page *) PAGE 1 *) PAGE 2 Since this application is used by two users... So the PAGE 1 should be accessible to A user....(A should not see PAGE 2) PAG
-
When i buy music or apps they dissapear before download
I've been trying to download both music and apps, when I do they proceed to download but then just dissapear. The card details are all alright so I really don't know why this is happening If anyone knows please help Thanks!