TNS Timed out error when connecting from internet
All,
Apologies if I am missing something simple...
I have set up a test 9i database on a Win 2003 Server, and I can connect to it fine from within my LAN. I am trying to connect to the same database from the internet, but am getting a TNS:Operation timed out error.
I believe I have set everything up correctly:
-Port Forwarding port 1521 on my simple Linksys router/firewall
-TNSPing gives me a sub-second OK (from the internet)
-I can get a TNS:listener could not resolve SERVICE_NAME error if I purposely screw up the service name in the tnsnames.ora file (proving, I think, that I can connect to the Listener from the outside internet)
Am I missing something simple? Why can I ping the listener but not get a response when trying to connect to the database (database is working, I can connect from within my LAN)?
Do I need to download and install the latest release for Win Server 2003?
Thanks,
Chris
Thanks for your response, Michael..
Is this something new in 9i? The reason I ask is that I swear that while working on another project last year I was able to set up a development 8i database in my home office and was able to allow my client hit this database from their own location (in Peru, via the internet) using a vb.net app that I had built. The only thing I did on my home router was to forward port 1521.
If my memory is wrong or things have changed since then, then what other ports other than 1521 are used to connect? Security is not really an issue, as I am just trying to set up a test database in order to Q/A an application I'm building.
Thanks in Advance,
Chris
Similar Messages
-
I am from the states and am in Greece on vacation. I have a good wifi connection yet keep getting a connection timed out error when I try to access the itunes store. It is funny because pending downloads show up in the cue, and they download no problem. I can also open my account. When I try to go the the movies or music section of the stor though it just times out. I tried updating to the latest itunes software and restarting, also I checked all the proxy boxes in the network section of the settings then unchecked them all and restarted and it keeps doing the same thing. Any help would be appreciated.
ThanksWelcome to AD!
There's been plenty of posts about Norton & the removal tool here. Unfortunately many folks seem to not even know it comes pre-installed on most PCs! Even a trial version, never used or long since expired can cause problems - and not just with iTunes.
Anyone with a Dell, HP, Gateway EEE PC, Asus ..... what Windows PC manufacturer does NOT have this junk software pre-installed?
Almost all of them have made deals with Symantec to pre-install it.
Horrible, horrible software.
Anyway, glad you finally solved your problem. -
Experiencing "timed out" error when uploading podcast
I am experiencing a "timed out" error when uploading a podcast to iTunes. Using PC. I've updated iTunes...
- You really need to ask the Basis team to extend the maximum run time for background processes (30 mins is too short).
- You can also try to reduce the run time by setting up BOM Buffering in configuration so if the same BOM is used again and again (in your case of delete and recreate planned order, yes), it will read from memory.
- You should set the planning horizon and use NETPL (net change in planning horizon) in daily run. So that the run will only find the relevant changes in order proposal up to certain days, thus reduce run time.
- You should discuss with your BASIS team about the list of background job in the batch windows. Specify time in such a way that the performance-critical job (i.e., MRP, reschedule sales order, certain customized report, etc.) doesn't run at the same time.
- You can increase the number of parallel processes to issue several jobs to run MRP at the same time.
Rgrds, -
Connection Timed Out error when I try to access Alert Inbox
Hi experts,
I have not been looking at my alert inbox for a while and I suspect it's very full.
When I tried to open the alert inbox from RWB, I encountered the following error:
<b>500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Mon May 07 11:08:51 2007
Module: icxxthr.c
Line: 2646
Server: ootspdbs02_PI1_01
Error Tag: {-}
Detail: Connection to partner timed out after 60s
</b>
All other functions of the RWB is working fine, including Alert Configurations.
I tried restarting the J2EE instance, but it did not help.
I've checked the SICF services, and they are fine.
I suspect the alert inbox is trying to load a huge amount of data, so it is timing out.
How can I adjust the keep_alive_timeout setting in this case?
When I look into RZ11, I am unable to edit this entry.
Please help.
Thanks.
RonHi Ron,
Follow these steps:
1. Try restarting the JAVA Stack.
2. ST22 check out any Dump.
3. In RWB --> Component Monotring --> check the Cache connectivity test...is all are Green ( Glowing )
Check these SAP Notes 750287,900896,768456
If that doesnt work out, check this SAP Note 840849
Regards,
Prateek -
TNS timed out error while testing REST service
4.2
11g
Hi There,
We had a new application which was to get and post data using REST API which connects to an internal server. This works fine when we use the Google Chrome Advance REST application through the browser, but get a TNS timed out when trying through Apex
Even a simple sql in the SQL workarea in Apex throws the same error
select utl_http.request( 'http://ourserver.com/api/subscriptions') test
from dual;
ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1130 ORA-12535: TNS:operation timed out
Any idea, what the issue could be? Works fine from the browser though using a REST client
Trying this for the first time.
thanks,
RyanHi Ryan,
During your installation, did you follow the steps to enable Network Services, which is one of the requirements when using web services in APEX. You'll find the necessary information in the installation guide. Also in your utl_http.request call, have you tried specifying a proxy, if one is required? You might also want to take a look at at apex_web_service API, specifically the make_rest_request function, which might be useful if you're looking to invoke a RESTful Service via PL/SQL in your application.
Regards,
Hilary -
I keep getting network timed out errors when downloading iPad software
How do I download ios5 without getting network timed out errors?
Try temporarily turning off your firewall and antivirus software until the download has completed.
-
TNS Ora-12532 error When connecting with Db11 running in the VM
I created a virtual machine from the PVM Entrerprise Linux 5 64 bits and db11g.
Inside the virtual Machine the sqlplus system/manager1@VDB11 is working well.
The tnsping 172.20.0.33 is working well too.
But from the other external machine using oracle 11g client these command are not working: Tns Ora-12532 error.
What to do?
Thanksmy virtual machine: vm1 have an static ip address 172.20.0.33
the oracle listener is was configured with the same ip
in the virtual machine : vm1 the /etc/hosts file content is:
127.0.0.1 localhost.localdomain
172.20.0.33 virtualdb11
in the tnsnames.ora file in the virtual machine i have a service:
VDB11 ...( host=172.20.0.33) (port=1521)
under console connection with my virtual machine vm1 the command : sqlplus system/manager1@VDB11 is working well
but when i working in an other external machine , where the tnsnames.ora have an entry:
VDB11 ...(host=172.20.0.33)......
the ping command : ping 172.20.0.33 is working well
but sqlplus system/manager1@VDB11 is not work and return the error:
ora-12532 tns -
Timed out error when running a report
The error is:
"Request timed out because there has been no reply from the server in 600000 ms"
Does anybody have any idea how to solve the issue?
The following is more info on the report:
Report has 8 subreports and data set is around 7MB size
We generated another report with 83MB of data and this report doesn't have any subreports and its running completely.
using Crystal reports XI r2 SP3, Visual studio 9, BOXI server SP3 and using XML as data source.
Any help would be appreciated.
The following is the Stack Trace:
System.Exception was unhandled by user code
Message="Load report failed."
Source="CrystalDecisions.CrystalReports.Engine"
StackTrace:
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, EnterpriseSession enterpriseSession)
at Covance.ED.Framework.Reporting.Workflow.CreateReportOutputActivity.executeCrystalReport_ExecuteCode(Object sender, EventArgs e) in C:\Source\TR\Components\Framework\Covance.ED.Framework.Reporting\Workflow\CreateReportOutputActivity.cs:line 189
at System.Workflow.ComponentModel.Activity.RaiseEvent(DependencyProperty dependencyEvent, Object sender, EventArgs e)
at System.Workflow.Activities.CodeActivity.Execute(ActivityExecutionContext executionContext)
at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext executionContext)
at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity activity, ActivityExecutionContext executionContext)
at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
InnerException: System.Runtime.InteropServices.COMException
Message="Failed to load info object."
Source="Analysis Server"
ErrorCode=-2147467259
StackTrace:
at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
InnerException:There are a few timeouts that could come into play here. One is a Corba timeout.
You'll want to adjust your ConnectionTimeout in your regisry under HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECTS\Suite 11.5\CER. The default value is 600000. Try doubling it to 1200000.
You may also want to increase your httpExecution timeout as well in your web.config file.
http://msdn.microsoft.com/en-us/library/e1f13641.aspx -
Error when connect from portal system (abap ) to external ssl client - sm59
Hi I am tryign to setup a ssl connection from the abap sm59 portal system to an exteral server.. I have setup the certs that the client has given me in strust.but i m gettign the ffg error.
sysno 60
sid PID
systemid 370 (Solaris on SPARCV9 CPU)
relno 7110
patchlevel 0
patchno 150
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile /usr/sap/PID/SYS/profile/PID_DVEBMGS60_pidevdb
pid 3911
[Thr 01] Thu Jun 14 08:38:48 2012
[Thr 01] TRACE FILE TRUNCATED
[Thr 07] Thu Jun 14 08:39:07 2012
[Thr 07] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL
[Thr 07] session uses PSE file "/usr/sap/PID/DVEBMGS60/sec/SAPSSLA.pse"
[Thr 07] SecudeSSL_SessionStart: SSL_connect() failed
[Thr 07] secude_error 536871970 (0x20000422) = "SSL record with the wrong SSLPlaintext.version received"
[Thr 07] >> Begin of Secude-SSL Errorstack >>
[Thr 07] ERROR in ssl3_get_record: (536871970/0x20000422) SSL record with the wrong SSLPlaintext.version received
[Thr 07] << End of Secude-SSL Errorstack
[Thr 07] SSL_get_state() returned 0x00002120 "SSLv3 read server hello A"
[Thr 07] SSL NI-sock: local=57.24.111.151:34110 peer=57.24.110.116:5081
[Thr 07] <<- ERROR: SapSSLSessionStart(sssl_hdl=10720d530)==SSSLERR_SSL_CONNECT
[Thr 07] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT {00020a7c} [icxxconn_mt.c 1957]
When i change the sm59 connection not to use ssl. it give me a pop up screen . and asks me to enter user and password...
He then give me a private key file .. i.e a .pfx file but not sure how to load this in strust. I tried to convert in useign sapgenpse. but it fails with teh ffg error
12% sapgenpse import_p12 -p /usr/sap/PID/amos/amos_client.pse /usr/sap/PID/amos/amos_client_pk.pfx
import_p12: MISSING password for PKCS#12 file "/usr/sap/PID/amos/amos_client_pk.pfx"
Please enter PKCS#12 encryption password: *******
PKCS#12/PFX file contains 1 keypair:
1. FriendlyName = "amos.server.interface.webuser.web_int.cert"
X.509v3 (type=Both) RSA-2048 (signed with sha1WithRsaEncryption)
Subject="CN=AMOS WebService Interface Client, OU=IT&S MRO, O=South African Airways (Pty) Ltd, L=OR Tambo International Airport, SP=Gauteng, C=ZA"
Issuer ="[email protected], CN=ca.flysaa.com, OU=Certificate Authority, O=South African Airways (Pty) Ltd, L=OR Tambo International Airport, SP=Gauteng, C=ZA"
ERROR: Incomplete certification path -- NEED certificate of "[email protected], CN=ca.flysaa.com, OU=Certificate Authority, O=South African Airways (Pty) Ltd, L=OR Tambo International Airport, SP=Gauteng, C=ZA"!
I have attached a doc of what it looks like.. appreciate any helpHi,
There is an error in the publishing of template
Template :"bbpsc02" is not publised in ITS.
Go to T.code: SE80
Publish all the templates again and check
Check with your SAP BASIS team for the help
Regards
Ganesh -
4215 Java error: When connecting from IPS event viewer
Hello-
I received a java error when trying to connect to my 4215 with Cisco IPS event viewer. It is as follows:
IOException in open Subscription(): java.security.cert.CertificateExpiredException: NotAfter: Sunday March 29
Is the web server running on 10.x.x.x:443? Please check the communication parameters of the device.
I can set the date on my pc back to last week and all works fine like b4. I have tried updating my java to the latest version and created a new certificate from the IPS.
Any help would greatly be appreciated:
ThanksHi,
The issue can be resolved by following the steps as below
1.Login to the sensor.
2.Run the tls generate-key command.
3.Make sure the certificate is generated.
4.Add the device again. It should work now.
REf: http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_qanda_item09186a008025c533.shtml
Do rate if it helped.
Regards
Sridhar -
ORA-12514 Error when connection from OEM
I have RAC database. I can access Cluster from https://rs1pre91dvdba01.pre.ccosvc.com:5500/em
but when clicking on database tab -> Performance -> Afer giving username / password I get
Listener refused the connection with the following error: ORA-12514, TNS:listener does not currently know of service requested in connect descriptor The Connection descriptor used by the client was: (description=(address_list=(address=(host=rs1pre91cl)(protocol=tcp)(port=1521))(address=(host=rs1pre91cl)(protocol=tcp)(port=1521))(load_balance=yes))(connect_data=(service_name=DWH1)))
[oracle@rs1pre91dvdba01 admin]$ . oraenv
ORACLE_SID = [oracle] ? DWH1
The Oracle base for ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1 is /u01/app/oracle
[oracle@rs1pre91dvdba01 admin]$ emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
https://rs1pre91dvdba01.pre.ccosvc.com:5500/em/console/aboutApplication
Oracle Enterprise Manager 11g is running.
Logs are generated in directory /u01/app/oracle/product/11.2.0/dbhome_1/rs1pre91dvdba01_DWH1/sysman/log
How can I access Performance tab from OEM.
thanks.[oracle@rs1pre91dvdba01 admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 02-FEB-2011 15:37:35
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 05-JAN-2011 12:06:28
Uptime 28 days 3 hr. 31 min. 7 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/rs1pre91dvdba01/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.2.201)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.2.203)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
Service "DWH1" has 1 instance(s).
Instance "DWH11", status READY, has 1 handler(s) for this service...
Service "DWH1XDB" has 1 instance(s).
Instance "DWH11", status READY, has 1 handler(s) for this service...
Service "MDM1" has 1 instance(s).
Instance "MDM11", status READY, has 1 handler(s) for this service...
Service "MDM1XDB" has 1 instance(s).
Instance "MDM11", status READY, has 1 handler(s) for this service...
The command completed successfully
[oracle@rs1pre91dvdba01 admin]$ lsnrctl service
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 02-FEB-2011 15:37:44
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:34200 refused:0 state:ready
LOCAL SERVER
Service "DWH1" has 1 instance(s).
Instance "DWH11", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:106 refused:0 state:ready
LOCAL SERVER
Service "DWH1XDB" has 1 instance(s).
Instance "DWH11", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: rs1pre91dvdba01.pre.ccosvc.com, pid: 6845>
(ADDRESS=(PROTOCOL=tcp)(HOST=rs1pre91dvdba01.pre.ccosvc.com)(PORT=45445))
Service "MDM1" has 1 instance(s).
Instance "MDM11", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:56105 refused:0 state:ready
LOCAL SERVER
Service "MDM1XDB" has 1 instance(s).
Instance "MDM11", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: rs1pre91dvdba01.pre.ccosvc.com, pid: 24224>
(ADDRESS=(PROTOCOL=tcp)(HOST=rs1pre91dvdba01.pre.ccosvc.com)(PORT=59486))
The command completed successfully
[oracle@rs1pre91dvdba01 admin]$ id
uid=500(oracle) gid=500(oinstall) groups=500(oinstall),501(dba)
[oracle@rs1pre91dvdba01 admin]$ env | sort
ASM_SID=+ASM1
_=/bin/env
COBBLER_SERVER=ccoshs02xvsat01.ccosvc.com
DB_HOME_BIN=/u01/app/oracle/product/11.2.0/dbhome_1/bin
DB_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
DISPLAY=localhost:10.0
DWH_SID=DWH11
G_BROKEN_FILENAMES=1
GI_HOME_BIN=/u01/app/11.2.0/grid/bin
GI_HOME=/u01/app/11.2.0/grid
GRID_HOME=/u01/app/11.2.0/grid
HISTSIZE=1000
HOME=/home/oracle/
HOSTNAME=rs1pre91dvdba01.pre.ccosvc.com
INPUTRC=/etc/inputrc
LANG=en_GB
LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0/dbhome_1/lib
LESSOPEN=|/usr/bin/lesspipe.sh %s
LOGNAME=oracle
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
MAIL=/var/spool/mail/oracle
MDM_SID=MDM11
NLS_DATE_FORMAT=dd-mm-yyyy hh24:mi:ss
OLDPWD=/u01/app/oracle/product/11.2.0/dbhome_1/rs1pre91dvdba01_DWH1/sysman/config
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
ORACLE_SID=DWH1
ORACLE_UNQNAME=DWH1
PATH=/u01/app/oracle/product/11.2.0/dbhome_1/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/sbin:/home/oracle//bin
PWD=/u01/app/oracle/product/11.2.0/dbhome_1/network/admin
SHELL=/bin/bash
SHLVL=1
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SSH_CLIENT=172.30.0.125 58337 22
SSH_CONNECTION=172.30.0.125 58337 172.30.2.201 22
SSH_TTY=/dev/pts/0
SVN_EDITOR=vi
TERM=xterm
TNS_ADMIN=/u01/app/11.2.0/grid/network/admin
USER=oracle -
Invalid security certificate error when connecting from office for iPad
Hi,
I have Alfresco Community running on my NAS including the SharePoint protocol support and can access it from any desktop Microsoft Office application but when I try to "Add a Place" in any of the Microsoft Office for iPad apps I get the following
error message: "Cannot Connect to Site - The site doesn't have a valid security certificate." followed by "Cannot connect to Server - The server may be unavailable. Check your internet connection and try again".
I have the following configuration
- Qnap NAS with QTS 4.1.3
- JRE 8.6.0
- Tomcat 7.0.50
- Alfresco 5.0.c with Share and SPP installed
- Tomcat, Alfresco and Share configured for SSL on 8443 using a self-signed certificate
- SPP configured for SSL on 7070
- iPad Air 2, iOS 8.2 and latest office apps
- CA and server certificate installed on the desktop computers and the iPad
Share and SPP can be reached on the respective ports and I get the websites as expected. And as mentioned desktop MS office applications can access Alfresco via SPP. But I cannot get it to work with the iPad office apps.
Can anybody help with this, please? I know I am not running SharePoint but I assume the problem with the iPad office app is the same?
Thanks
Peter1. I can't say if it is sequential or not, I have never seen a message like that myself when doing add-on update checks - but I have seen other messages, like the update server not using a secure HTTPS address after that became a requirement for updates. <br />
Plus, I have never used anything from Conduit - ''the founder of that company has a shady past with different internet companies puling all dorts of "stuff", IMO. And all Conduit add-ons were removed and banned from the official add-ons website a few years ago because of their "antics" and major user uproar at the time - just recently have we seen a few return''.
2. Right-click individual addons and use ''Visit Homepage''' to see if that feature is being used as intended and where it takes you. Or use '''Find Update''' and see if that triggers that message, to discover which extensions are fro Conduit.
3. IMO, you are better off updating each extension one at a time with '''Find Update''', as I mentioned above. -
ORA-12541: TNS:no listener Error When connected to net....
I am using internet via mobile on my pc. Whenever I am connected to the net I can't run the following code from Visual studio.
It shows the following error:
OleDbException was unhandled
ORA-12541: TNS:no listener
I have no idea about it.please help!!
***************************Code Section*****************
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Windows.Forms;
using System.Data.OleDb;
using Oracle.DataAccess.Client;
namespace gridques
public partial class Form1 : Form
OleDbConnection newConnection;
public Form1()
InitializeComponent();
private void Form1_Load(object sender, EventArgs e)
newConnection = new OleDbConnection("Provider=MSDAORA.1;Data Source=orcl;User ID=project;Password=project");
newConnection.Open();//////********IT SHOWS THE ERROR HERE*************
private void show_Click(object sender, EventArgs e)
OleDbCommand resultsCommand = null;
OleDbDataAdapter resultsAdapter = new OleDbDataAdapter();
DataTable resultsTable = new DataTable();
try
// establish command object and data adapter
resultsCommand = new OleDbCommand("select * from stock order by serialNo", newConnection);
resultsAdapter.SelectCommand = resultsCommand;
resultsAdapter.Fill(resultsTable);
dataGridView1.DataSource = resultsTable;
catch (Exception ex)
MessageBox.Show(ex.Message, "Error in Processing SQL", MessageBoxButtons.OK, MessageBoxIcon.Error);
resultsCommand.Dispose();
resultsAdapter.Dispose();
resultsTable.Dispose();
}Hi,
ORA-12541: TNS:no listener
Many reason but first thing need to check is "Is your listener is up and running on the server"
lsnrctl statusregards,
Taj -
Hi,
Can anyone help me in the below issue.
we have a Linux server with agent version 11.12.009 installed on it. when I try running opcragt command on it through are management server it gives the output that all agent components are running.
but when I check the agent status or version through opcagt command on it it gives below error:
ERROR: (depl-86) Unable to execute command 'opcagt' on node
(depl-176) Message returned from host
(xpl-117) Timeout occurred while waiting for data.
Below are the error lines that I got from system.txt file of the server:
0: ERR: Fri Dec 19 09:09:38 2014: ovconfd (3708/140429034952480): (conf-180) Could not create messenger for configuration server 'ovconfd' and register its methods with the messenger object.
1: ERR: Fri Dec 19 09:09:38 2014: ovconfd (3708/140429034952480): (xpl-89) write(11)[012C5430] failed.
2: ERR: Fri Dec 19 09:09:38 2014: ovconfd (3708/140429034952480): (RTL-28) No space left on device
Could anyone please let me know what can be the issue in this.
Thanks,
AkanshaORA-00600: internal error code, arguments: [kzxcInitLoadLocal-7], [942],
[ORA-00942: table or view does not exist
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 252
ORA-06512: at line 36
ORA-01403: no data foundWhat does this query return?
SQL> SELECT HOST, ACL
FROM DBA_NETWORK_ACLS;Please see (Redefining a Network Access Control List Fails with ORA-1403 [ID 854083.1]).
Thanks,
Hussein -
"Shared storage client timed out' error when starting a batch
I'm getting this error on every node in the cluster. What am I doing wrong?
I also administer a managed cluster with 6 machines, and have been using it successfully for almost a year now. But the only encoding that is submitted is directly through Compressor, never via FCP.
With QMaster, it sees a Quickcluster and a managed cluster the same way. While they are set up differently, the principle is the same, QMaster only sees services.
Exporting out of FCP to any cluster has always been slow. If you want to harness the power of distributed encoding, you could export a Quicktime reference file and take that into Compressor to be submitted to the cluster for encoding.
Maybe you are looking for
-
Purchase order flow and FI solution?
Hi, We have a PO contract for Quantity 100 pc. On item 10 we have saw-costs, 10 Euro. In our first purchase order we call off 40 pc we pay these saw costs. In the next purchase order we call off 60 pc. But we only want to pay in the first call off th
-
No Insert Flash dialog box in PPT files with links to Word
Presenter will not display the "Insert Flash (swf)" dialog box in PowerPoint presentations that have slides linked to a Word document. It works fine in PPT presentations that do not have the links to Word. I need to import a SWF in the presentation a
-
Can't install Lightroom 5.7 on Mac
I have Lightroom on both Mac and PC. The upgrade to 5.7 from 5.6 worked fine on PC but not on Mac. When I get a popup or go to upgrade on the help menu, I click on upgrade but the link takes me to a 5.6 download which I already have installed.
-
Default settings for source storage type and storage bin ..
Hi, While doing Transfer Order ,I want to make the source stage type and bin as default values.Where can I make these settings? i am using normal WM and not Lean WM Edited by: Roopak India on Sep 4, 2009 7:22 AM
-
Application on PC is free but when sent to mobile ...
Hi, I wanted to get Fake Messages by Dr. Jukka so I opened Ovi Store on my PC and sent the link on my phone where instead of download button was buy and the price. What's the catch?! Attachments: Screenshot0017.jpg 25 KB fm.JPG 106 KB