Tnserror
Hi All,
I'm getting following error while pinging, Can anyone suggest.
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 10-APR-2013 08:21:59
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oraeng/app/oracle/product/10.2.0/db_1/network/admin/sqlnet.ora
TNS-03505: Failed to resolve name
Regards,
TK
the database you are trying to tnsping it's entery is not present in tnsnames.ora file or you are not using the correct entery. to check it go to tnsnames.ora file and check the aliase name for the particulary entery
eg
In tnsnames.ora file
TEST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = x.x.x.x)
(PORT = xxxx)
(CONNECT_DATA =
(SID = test)
(SRVR = DEDICATED)
cmd promt
#tnsping TEST
Similar Messages
-
How to connect db to form builder
hi
i installed form6i in xp system
i want to add a table to form it shows an error tnserror
i specify my db in tnsnames.org file
but i couldn't connect to my db ..
at the time of installation it shows the home dir as orahome92 i changed to orahome92i in oracle same directory
pl's help mewhat database version do you have?
-
10gR2 Clusterware Install on Windows 2003 SP2 after Patch 10.2.0.4 crash
After fresh installaion 10g R2 clusterware and db on Windows 2003 (x64) sp2.->>Works well
Install Patch 10.2.0.4 -->>Tnserror and other error as write in metalink (February 2010 Patch 32)
--Remove all oracle files (c:\programfiles\oracle\*.*,d:\oracle\*.*,c:\windows\system32\drivers\o???.dll ),
--all registery,all GUIOracleOBJManager.exe partition,
--all system enviroment,
--all c:\temp and c:\windows\temp and c:\localseting\???\temp from both system.
But with new installation 10gR2 Clusterware error on second machine D:\oracle\product\10.2.0\crs\log\rac2\evmd\evmd.log below
2010-02-12 11:48:10.171: [ EVMD][2716]32Daemon Version: 10.2.0.1.0 Active Version: 10.2.0.4.0
2010-02-12 11:48:10.171: [ EVMD][2716]32Exiting, Active Version greater than Software Version
2010-02-12 11:48:10.171: [ EVMD][2716]32EVMD exiting: Version Compatibility check failed
My question how can i clear all installation Oracle 10gR2 with patch 10.2.4. from windows 2003I solved my problem.
Solution dont forget to clean all ocr and voting disk using storage software .Oracle clean log utility does not clean all data or other things in disk volumes.
You must use storage clean utlity or rebuild your volume in storage software.
Thanks -
Help to interpret tracing of listener file
Hi,
how do i interpret the trace (support) output for listener, noticed stack error TNS-04315: any suggestions or help is appreciated.
trying to find any errors or problems in the listener or network.
* Trace Assistant *
---> Send 94 bytes - Data packet
Data Packet flags:
End of file
(DESCRIPTION=(TMP=)(VSNNUM=169870336)(ERR=0)(COMMAND=trc_level)(TRCLEVEL=support)),,
<--- Received 200 bytes - Connect packet
Current NS version number is: 313.
Lowest NS version number can accommodate is: 300.
Global options for the connection:
Don't care
Maximum SDU size: 2048
Maximum TDU size: 32767
NT protocol characteristics:
Test for more data
Test operation
Full duplex I/O
Generate SIGPIPE signal
Generate SIGIO signal
Handoff connection to another
Line turnaround value: 0
Connect data length: 142
Connect data offset: 58
Connect data maximum size: 2040
Disable NA services on this connection
No NA services are linked in
Disable NA services on this connection
No NA services are linked in
(DESCRIPTION=(CONNECT_DATA=(CID=(PROGRAM=)(HOST=db21)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169870336)
---> Send 62 bytes - Redirect packet
Redirect data length: 52
Redirect Data:
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=#16567.2)))
<--- Received 200 bytes - Connect packet
Current NS version number is: 313.
Lowest NS version number can accommodate is: 300.
Global options for the connection:
Don't care
Maximum SDU size: 2048
Maximum TDU size: 32767
NT protocol characteristics:
Test for more data
Test operation
Full duplex I/O
Generate SIGPIPE signal
Generate SIGIO signal
Handoff connection to another
Line turnaround value: 0
Connect data length: 142
Connect data offset: 58
Connect data maximum size: 2040
Disable NA services on this connection
No NA services are linked in
Disable NA services on this connection
No NA services are linked in
(DESCRIPTION=(CONNECT_DATA=(CID=(PROGRAM=)(HOST=db21)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169870336)
---> Send 77 bytes - Accept packet
Accepted NS version number is: 313.
Global options for the connection:
Don't care
Accepted maximum SDU size: 2048
Accepted maximum TDU size: 32767
Connect data length: 45
Connect data offset: 32
Connect data: (DESCRIPTION=(TMP=)(VSNNUM=169870336)(ERR=0))
Native Services wanted
Disable NA services on this connection
No NA services are linked in
Disable NA services on this connection
No NA services are linked in
<--- Received 11 bytes - Marker packet
One data byte.
Hex character sent over to the server: 76
---> Send 1324 bytes - Data packet
(DESCRIPTION=(TMP=)(VSNNUM=169870336)(ERR=0)(ALIAS=LISTENER)(SECURITY=
ON: Local OS Authentication)(VERSION=TNSLSNR for Linux: Version 10.2.0
.4.0 - Production)(START_DATE=02-DEC-2009 18:38:24)(SIDNUM=1)(LOGFILE=
/u01/app/oracle/OraHome_1/network/log/listener.log)(TRACEFILE=/u01/app
/oracle/OraHome_1/network/trace/listener.trc)(PRMFILE=/u01/app/oracle/
OraHome_1/network/admin/listener.ora)(TRACING=support)(UPTIME=13034131
5)(SNMP=ON)(PID=16567)(START_DATE_NUM=2009-12-02 18:38:24)),,(ENDPOINT
=(HANDLER=(HANDLER_MAXLOAD=0)(HANDLER_LOAD=0)(ESTABLISHED=0)(REFUSED=0
)(HANDLER_ID=79C357726978-4F8F-E040-820AA6E640B7)(PRE=any)(SESSION=NS)
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1))))),,(ENDPOINT=(HAN
DLER=(HANDLER_MAXLOAD=0)(HANDLER_LOAD=0)(ESTABLISHED=0)(REFUSED=0)(HAN
DLER_ID=79C357726979-4F8F-E040-820AA6E640B7)(PRE=any)(SESSION=NS)(DESC
RIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=db21)(PORT=1521
))))),,(ENDPOINT=),,(SERVICE=(SERVICE_NAME=TEST)(INSTANCE=(INSTANC
E_NAME=test)(NUM=2)(NUMREL=1))),,(SERVICE=(SERVICE_NAME=TESTXDB)(INSTANCE=(INSTANCE_NAME=TEST)(NUM=2)(NUMREL=1))),,(SERVICE=(SER
VICE_NAME=TEST_XPT)(INSTANCE=(INSTANCE_NAME=TEST)(NUM=2)(NUMRE
L=1))),,(SERVICE=(SERVICE_NAME=PLSExtProc)(INSTANCE=(INSTANCE_NAME=PLS
ExtProc)(NUM=1)(INSTANCE_STATUS=UNKNOWN)(NUMREL=1))),,
---> Send 10 bytes - Data packet
Data Packet flags:
End of file
<--- Received 218 bytes - Connect packet
Current NS version number is: 313.
Lowest NS version number can accommodate is: 300.
Global options for the connection:
Can receive attention
No attention processing
Don't care
Maximum SDU size: 2048
Maximum TDU size: 32767
NT protocol characteristics:
Test for more data
Test operation
Full duplex I/O
Urgent data support
Generate SIGURG signal
Generate SIGPIPE signal
Generate SIGIO signal
Handoff connection to another
Line turnaround value: 0
Connect data length: 160
Connect data offset: 58
Connect data maximum size: 512
Native Services wanted
NAU doing O3LOGON - DH key foldedin
Native Services wanted
NAU doing O3LOGON - DH key foldedin
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=db21)(PORT=1521))(CONN
ECT_DATA=(SERVICE_NAME=TEST)(CID=(PROGRAM=hmw)(HOST=vmm2)(USER=stest))))
Error found. Error Stack follows:
id:6
Operation code:72
NS Error 1:12586
NS Error 2:0
NT Generic Error:0
Protocol Error:0
OS Error:0
NS & NT Errors Translation
TNS-04315: Trace Assistant Internal error: Can't find resource for bundle oracle.net.trcasst.mesg.TnsError, key 12586
00000, 00000 "Not An Error"
// *Cause: Everything is working as it should.
// *Action: Dont worry: Be happy.
00000, 00000 "Not An Error"
// *Cause: Everything is working as it should.
// *Action: Dont worry: Be happy.
///////////////////////////////////////////////////////////////Hi,
Refer to below oracle doc to get info on trace assistant. As per your Issue might be related to time dependent on current system - some thing related to time out Issue. Not sure.
http://download.oracle.com/docs/cd/B14117_01/network.101/b10775/troublestng.htm#i459188
- Pavan Kumar N
Oracle 9i/10g - OCP
http://oracleinternals.blogspot.com/
Maybe you are looking for
-
I just got off the phone with apple support. I just received my new iMac. (well new to me bought a refurb.) This machine was originally built in July 2011. It shipped to me with 10.7 Lion installed, but was originally shipped with 10.6 in july 2011.
-
How do I change or delete album art?
I put the wrong album jpg in the iTunes library for a song and want to change or delete it. How can I do this? iMac G5 Mac OS X (10.4.6)
-
Version Document Info Record and File Management
Hi all! want to edit DMS document info records (as in cv04n - add, del files) without deleting original DIR -> Version management of DIRs. I use the following BAPI scenario: - BAPI_DOCUMENT_GETACTVERSION (get the highest version of a DIR) - BAPI_DOCU
-
Clamshell mode not working, tried every possible way
Grr, this is getting so frustrating. I have tried every possible method, even following apple's guides. None of them work for me. I even tried the "boot" method the guy told me about in the last thread, and that still didn't work!!! I have both my bl
-
CO09 wong result after EHP5 upgrade
Hello after a EHP5 upgrade the availability check with storage locations does not work anymore. We have stock on storage location 0001. The availability check selects sometimes also orders from storage location 0005 and calculates a wrong ATP value.