TNSLSNR is failed when the no. of process exceeds.

Hello,
We received a problem like if the process or sessionsis exceeded the no. 150, then the listener got down and error has come like "TNSLSNR is failed ".
but if you kill some process and if the no. process is below 150 then again it will works fine.
That is the case when no. process or the sessons reached to 150 the listener got disbalanced. but in init.ora and spfile , the number of process is 250 and the sessions is 280. I dont know why this problem has come.
please help me.
if you have any idea then please mail me to [email protected]
Thanks
bye
Pranab

But is shows TNS internal limit restriction exceed.Yes, that is because of this Operating System error:
HPUX Error: 23: File table overflowRefer to the metalink note provided above by oradba and fix the underlying OS error. First fix the root cause of the error which is the OS error "File table overflow". Once you do that, try again and post errors if still you have issues.
Message was edited by:
Kamal Kishore

Similar Messages

When i run Time Machine to back up my computer onto an external hard drive, i have no way of knowing when the back up process has been completed. I don't know when it is safe to disconnect the external hard drive - which is store in a separate location.

When i run Time Machine to back up my computer on to an external hard drive, i have no way of knowing when the back up process has been completed. This is necessary to know because i don't leave my external hard drive connected to the computer. I routinely disconnect it after backing up the hard drive, and then i store the external hard drive in a different location from the computer. So, knowing when the back up process has been completed would be a very helpful thing to have the computer specify.

Just enable Time Machine's menu extra (System Preferences -> Time Machine -> Show Time Machine in menu bar.
This will add a little Time Machine icon to your menubar. When Time Machine is actively backing up your data, the icon will spin as a visual indicator. You can also click the menu icon to see the backup status, including how much data is left to back up.

Screens missing when the Recording is processed : XK01

I need to upload vendor master data. I also need to capture second address under the International Versions section. I could record it ( selecting the checkbox "Not a Batch Input Session") in the very first screen of SHDB.
Otherwise we will not be able to see the actual screens in ME11.
Problem:
When the recording is processed, the International versions screen is not displayed and the process stops in the very first screen itself. It is not proceeded further.THe recording shows that everything is captured perfect.
Can anybody give me the solution for this.This is very critical.
SAP Version : 4.7
Regards,
Siva

Hi Siva
Try checking the Central Address Mgmt check box in the first screen while taking a recording. Or, if you think it is an issue with authorizations, try recording with an MM (functional) user id.
If you find this answer useful, please reward me for the same.
Good luck
Karthik Potharaju

Modbus Ethernet Slave seems to fail when the Master query information simultaneously for more than 16 Coils or Discrete Inputs.

I'm developing an control application by using the Modbus TCP/IP for communicating with the host computer.
I'm using the Modbus Library for LabVIEW
(http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=F1582737BACF5CA8E0340003BA7CCD71&p_node=DZ52363&p_source=External).
The LabVIEW MB Ethernet Slave seems to fail when the MB Ethernet Master
query information simultaneously for more than 16 Coils or Discrete
Inputs.
The Modbus Application Protocol Specification (http://www.Modbus-IDA.org) state that:
1- The function code 0x01 'Read Coilsis' is designed to read from 1 to 2000 contiguous status of coils in a remote device.
2- The function code 0x02 'Read Discrete Inputs' is designed to read
from 1 to 2000 contiguous status of discrete inputs in a remote device.
To test the behaviour of the LabVIEW MB Ethernet Slave I have modified
the 'MB Ethernet Example Slave.vi' by adding more Coils and Discrete
Inputs. I have added up ONLY to 20 Coils and 20 Discrete Inputs.
By using the 'MB Ethernet Example Master.vi' the answer to the MB query
is correct for the first 16 Coils or Discrete Inputs. Starting from the
17th Coil or Discrete Input the MB Ethernet Slave doesn't give any
answer.
By shifting the start point address the answer remain correct for the first 16 Coils or Discrete Inputs.
I have tested the slave by using also a third part MB Ethernet Master and the behaviour is the same.
1) There is a reason for this behaviour?
2) There is a Modbus Library for LabVIEW that satisfy the 'Modbus
Application Protocol Specification' managing from 1 to 2000 contiguous
status of Coils or Discrete Inputs?
Thanks,
Asper

I have the same problem with the MB Ethernet.
I need 40 Outputs.
The first 16 work perfectly. The next 8 coils do not work, The next 8 work, The next 16 do not work,The next 8 work,The next 24 do not work And work for the last 8. Conclusion, to activate the 40 outputs, I needed 88 coils.
Because 48 coil, do nothing Can someone help me and i cant implemet the jim solution

CTI warning: The request failed because the timeout limit was exceeded.

hi,
For a perticular IP Phone extension when agent is going to login using CTI agent toolkit then CTI generatin this msg "CTI warning: The request failed because the timeout limit was exceeded". but the other ph is working fine. I have deleted this phone and add againg. And the ph re-associate with PG and JTapi user. but still have the prob. For more plz see the find attached.

Your first troubleshooting step here should be to check what JTAPI Gateway thinks is the state of that extension, you can easily check that through procmon. Here's an example from my lab.
C:\Documents and Settings\Administrator>procmon ipcc pg1a jgw1
>>>>jdi 2000
>>>>
Addr: 2000      ActiveLines: 0          RegistrationState: IN_SERVICE
        m_CurrentInvokeID = 0
        m_elapsedTPServicesRequestSeconds = 0
        queuedDTMFDigits = null
        sendingDTMFInProgress: N
        sendQueuedMsgAddCallObserverResponse: Y
        monitoredVirtualDialerPort: N
        virtualDialerPort: N
        loggedInAgent: N
        DeviceStatus : UnmonitoredDevice
        addressDeviceType : GWMSG.DEVICE_TYPE_DEVICE
        observeredTypeString : logged Out Agent Device
        isAddressRestricted: N
        addressDeviceProtocol : PROTOCOL_SCCP
        silentMonitorStatus : 0
        silentMonitoredCallID : -1
        TerminalName : SEP001BD52C547F
The RegistrationState should be IN_SERVICE for a phone that is registered with CUCM. If you can see that the phone is registered with CUCM in it's adminsitration pages, made sure that it's in the list of associated devices, made sure you're running the correct version of the jtapi plugin and still see it as OUT_OF_SERVICE, you're probably looking at a CTI Manager defect. CSCti07947 and CSCti11651 spring to mind but there are probably a couple more.
Most of these defects should be fixed in releases like CUCM 7.1(5), 8.0(x) and up. If the issue persists, you're probably best off opening a TAC Service Request to identify the exact cause. The PG (JTAPI Gateway) only shows you what it gets from CTI Manager, so as you can see from my above observations, you'd want to focus your troubleshooting on the CUCM end.

Client certificate authentication fails when the CA list sent by server is big and the list goes in 2 encrypted messages.

I checked with IE browser(on windows and MAC) and MAC safari packet capture. The CA certificate list is sent by server in 2 messages as the list is too big. I compared packet by packet exchanges in both the browsers. It is same till TLSv1 handshake is done for the ldap certificate authentication. It works fine in IE without any issues though the certificate list is divided into 2 messages.
In case of safari, after the TLSv1 handshake is done successfully, it again sends a SSLv3 'Client Hello' message and initiates the whole handshake process again and the server responds to it too till the handshake is complete. But it brakes after that with the server showing 'Cant establish secure connection' at the browser.
The issue occurs only in case of MAC safari for big list of CA certs >150(where it crosses the max limit) from server. It is not clear why safari alone is switching from TLSv1 to SSLv3 in this scenario.
NOTE: With shorter list of CA certs at server when it goes in one message, safari works fine and all messages are only TLSv1 and does not repeat the handshake process.
I have checked on safari version 5 and 6.0.3 on OS X mountain lion.
Is there any specific reason why MAC safari behaves like this or somethings needs to be done at server?
Any help would be appreciated.

I checked with IE browser(on windows and MAC) and MAC safari packet capture. The CA certificate list is sent by server in 2 messages as the list is too big. I compared packet by packet exchanges in both the browsers. It is same till TLSv1 handshake is done for the ldap certificate authentication. It works fine in IE without any issues though the certificate list is divided into 2 messages.
In case of safari, after the TLSv1 handshake is done successfully, it again sends a SSLv3 'Client Hello' message and initiates the whole handshake process again and the server responds to it too till the handshake is complete. But it brakes after that with the server showing 'Cant establish secure connection' at the browser.
The issue occurs only in case of MAC safari for big list of CA certs >150(where it crosses the max limit) from server. It is not clear why safari alone is switching from TLSv1 to SSLv3 in this scenario.
NOTE: With shorter list of CA certs at server when it goes in one message, safari works fine and all messages are only TLSv1 and does not repeat the handshake process.
I have checked on safari version 5 and 6.0.3 on OS X mountain lion.
Is there any specific reason why MAC safari behaves like this or somethings needs to be done at server?
Any help would be appreciated.

OdiSendMail fails when the session is restarted

Hi All,
I am having a peculiar problem. I use a variable to store the IP address for the SMTP host and use this variable in the ODISendMail command. Now, my package is designed in such a manner that whenever a component fails, ODI shoots off a mail. Things work fine when the a component fails for the first time during the execution of the package.The problem occurs when I restart the session and another component fails. Then ODISendMail fails with the following error:
javax.mail.SendFailedException: Sending failed;
nested exception is:
javax.mail.MessagingException: Unknown SMTP host: 62.172.212.49
How could this be when the command worked with the same parameters during the first invocation? Any help is appreciated.

Hi Steph,
Thanks for the response. Could you please suggest any remedy to the problem? How did you handle it when you faced it? Any help is appreciated.

Issue when the invoice is processed through Edi.

Hi Experts,
Purchase order reference line items are missing when the invoice is created using EDI.
Can any body have an idea on above given?
Regards,
SK.

Hi,
How you are creating invoice?
Creating based on data coming from Idoc or sending Invoice data as Idoc.
please elaborate.
Regards,
Bhavana.

Csv upload fails when the header contains colon (:)

Hi,
There seem to be a problem with the csv upload to the database tables. If the column header of the csv file contains colon the process fails.
Please help!!
Mustak

Hi Andy,
Thanks! The APEX version is 2.0. I have developed an application where I uploading models and their features from the csv file. The csv file headers are models names, feature names etc and the rows are models and their corresponding features. Some of the features(as headers) contains colons such as "3:2-pulldown compensation", a feature of TV. The upload process reads the models and features and load the feature values to the appropriate table. So you can imagine the column headers are important for the process. I wander if there is any work around.
Mustak

Why does the DLL function executed by call library node fail when the Vi is re-opened?

Development System
OS: Windows XP
LabVIEW: version 10.0
DLL: Custom
Compiler: Visual C++ 6.0
Function Prototype: __declspec(dllexport) const char * test(void)
We have developed a DLL for use. The DLL compiles cleanly.  The DLL includes a function test.  The test function validates the functional capabilities of the DLL. I have followed the examples online, and I have used the import shared library tool in LabVIEW. The VIs created use the call library node.
When I create a VI calling the test function from the custom DLL using the call library node the VI executes the DLL function test flawlessly. I close the VI. When I re-open the VI and run it, I get an error code from the DLL.  However, if I go to the block diagram and set the path for the DLL in the configure call library node again then the VI executes the DLL function test flawlessly again.
I have to set the path for the DLL in the configure call library node every time I open the VI. The examples I downloaded from the community do not require this. What might the DLL be missing? What am I missing?
Solved!
Go to Solution.

I think it was rather unfair of me to ask for help with my DLL issue without disclosing more detailed information. As a corrective action, I have attached a zipped file. The zipped file contains the entire VC++ 6.0 project for compiling the DLL, the DLL, and the VI I have been using to test it.
###NOTE####
As a prerequisite to compilation and usage of the DLL you'll need to have installed Python 26 on your system.
You may obtain the MSI for correct version of Python from the following location:
http://www.python.org/ftp/python/2.6.6/python-2.6.6.msi
###NOTE###
Thank you very kindly for any assistance offered!
Thanks,
Bill
Attachments:
C_DLL_PYTHON_AND_LABVIEW2010.zip ‏1685 KB

IPhone 5 iOS 7.1.4 Call failed every time when the other person hung up before me

iPhone 5 iOS 7.0.4 says Call failed every time when the other person hung up before me,
Is there anything I can do to about that please?

Hey there Yonidawit,
It sounds like you are are getting a message saying that the call failed, when the person you are talking to hangs up. I have a few things to recommend here. First close all the open apps:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone and test it out again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If that does not resolve it, try resetting your network settings:
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
From: iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Regards,
Sterling

DTEXEC does not fail when SSIS package fails

I need to run my SSIS 2012 packages through the catalog with DTEXEC. This works very well, except that if my SSIS package fails, DTEXEC does not fail. I need DTEXEC to fail, so my scheduler knows that there is an error.
I use the following command:
dtexec /ISServer "\SSISDB\MyFolder\MyProject\MyPackage.dtsx" /Ser MyServer /Par $Package::Partition;201412 /Env 5
When I check the status of the run in the Catalog, it is failed.
When I used SSIS 2008, I had no problem getting DTEXEC to fail when the packages failed.

I've had the same problem, and come up with the following prototype for a SQL Script which I run in our JAMS Enterprise Scheduler. It uses SSISDB stored procedures to start the SSIS package and polls every 5 seconds to report any messages, and final
status code of the package. JAMS parameters are delimited by << >> symbols, and will need to be changed for your scheduler/batch process. I guess the script could be converted to a stored procedure. I'm also hoping it will work with SQL High
Availability groups to ensure the SSIS package runs on the server that's hosting the active database.
DECLARE @execution_id BIGINT
DECLARE @status INT= 1
DECLARE @Event_Message_id BIGINT= 0
DECLARE @Last_Event_Message_id BIGINT= 0
DECLARE @message_time DATETIME2(7)
DECLARE @message NVARCHAR(MAX)
--Create a SSIS execution for the required SSIS package and return the execution_id
EXEC [SSISDB].[catalog].[create_execution] @package_name = N'<<pPackageName>>.dtsx',
    @execution_id = @execution_id OUTPUT, @folder_name = N'<<pSSISFolderName>>',
    @project_name = N'<<pSSISProjectName>>', @use32bitruntime = <<p32Bit>>, @reference_id = NULL
RAISERROR('Starting SSIS package <<pPackageName>> with execution_id %I64d on server %s',0,0,@execution_id,@@SERVERNAME) WITH NOWAIT
--Set the logging level 0-none, 1-basic (recommended), 2-performance, 3-verbose
EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id,
    @object_type = 50, @parameter_name = N'LOGGING_LEVEL',
    @parameter_value = <<pLogging_Level>>
--Start the package executing
EXEC [SSISDB].[catalog].[start_execution] @execution_id
WHILE @status IN ( 1, 2, 5, 8 ) --created (1), running (2), canceled (3), failed (4), pending (5), ended unexpectedly (6), succeeded (7), stopping (8), and completed (9).
    BEGIN
        WAITFOR DELAY '00:00:05'
    --Get the status to see later if we've finished
        SELECT @status = status
        FROM    SSISDB.catalog.executions
        WHERE   execution_id = @execution_id
    --Are there any event messages since we last reported any?
        DECLARE curEventMessages CURSOR FAST_FORWARD
        FOR
            SELECT event_message_id ,
                    message_time ,
                    message
            FROM    SSISDB.catalog.event_messages
            WHERE   operation_id = @execution_id
                    AND event_message_id > @Last_Event_Message_id;
        OPEN curEventMessages
        FETCH NEXT FROM curEventMessages INTO @Event_Message_id, @message_time,
            @message
        WHILE @@FETCH_STATUS = 0
            BEGIN
        --We've found a message, so display it - watch out for % signs in the message, they'll cause an error if we don't replace them
                SET @message = CONVERT(NVARCHAR(MAX), @message_time, 113)
                    + ' ' + replace(@message,'%',' percent')
                RAISERROR(@message,0,0) WITH NOWAIT
                SET @Last_Event_Message_id = @Event_Message_id --Make a note that we've reported this message
                FETCH NEXT FROM curEventMessages INTO @Event_Message_id,
                    @message_time, @message
            END
        CLOSE curEventMessages
        DEALLOCATE curEventMessages
    END
--@Status indicates that package execution has finished, so let's look at the outcome, and error if there's a problem
IF @status = 7
    RAISERROR('Package Succeeded',0,0)
ELSE
    IF @status = 9
        RAISERROR('Package completed',0,0)
    ELSE
        IF @status = 3
            RAISERROR('Package Cancelled',16,1)
        ELSE
            IF @status = 4
                RAISERROR('Package failed (see error message above)',16,1)
            ELSE
                IF @status = 6
                    RAISERROR('Package ended unexpectedly',16,1)
                ELSE
                    RAISERROR('Package ended with unknown status %i',16,1,@status)

Error code: 3194 when restoring.. "Secure link to iTunes store failed" when diagnostics is ran..

as mentioned in the title, I have encountered 2 errors, one is when I am trying to restore my iphone and the other when iTunes diagnotics feature is ran..
I have read the information about the diagnostics result and saw something like "connection attempt to firmware update server unsuccessful". Because of this information I have concluded that the "error code 3194" happens because iTunes itself is unable to connect to the "firmware update server".
I am using Windows 7 64-bit and iTunes is now on the latest version.
below are the things I have done so far, but to no avail:
- removed/disabled my antivirus program
- put iTunes to exception list of WIndows Firewall
- disabled windows firewall and windows defender
- re-installed iTunes and made sure that it is of the latest version (version 10.6.1)
- performed recommendation from: https://discussions.apple.com/message/17409780#17409780
- perform flush dns command using command prompt
In addition to the steps I mentioned, I also tried running the diagnostics on two other computers running on different versions on iTunes, 10.5 and 10.6.0. I also did the same steps as above on these two computers, but I am getting the "secure connection to iTunes store failed" when the diagnostics were ran.
thanks for any help that you can give.

I think its weird that I experienced both the 3194 error code and "secure link to the itunes store failed" diagnostics error on three computers running on different OS (XP, vista and 7), itunes version and connectivity types (wireless and cabled). Could it be possible that there is a problem on Apple's server?
Are you still there, shintenhouji?
Perhaps try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(I've seen a few cases in recent times of this sort of thing being associated with LSP issues.)

Known issue: Speech APIs fail when an x86 package is run on an x64 desktop (Windows 10 Insider Preview SDK and tools, April 2015 release)

When building an app for the x86 platform, speech APIs fail when the x86 package is run on the desktop of an x64 system. You may see an error with the message "mod not found".

Use the Visual Studio Configuration Manager to retarget the app to x64 when running on an x64 system.

Webapp authentication failed when using chinese characters as login name

Hello,
I have tried webapp authentication on tomcat and oc4j, via BASIC and FORM auth-method. All failed when the login name contains non-English characters. It seems an encoding issue, therefore, I also tried to change the page encoding of the login form to utf-8. None of the above is successful. Is there any solution? I really appreciate any help!
Thanks in advance!!

Enterprise support:
Call enterprise support (866) 752-7753 to create a case ID number
Get an account at
http://developer.apple.com/ then submit a bug report to http://bugreporter.apple.com/
Once on the bugreporter page,
   -- click on New icon
   -- See if you need to attach a log file or log files, clicking on Show instructions for gathering logs. Scroll down to find the area or application that matches the problem.
   -- etc.
Developers:
"Submitting Bugs and Feedback
Your feedback goes a long way towards making our products even better. With Apple Bug Reporter, you can submit bug reports or request enhancements to APIs and developer tools."
https://developer.apple.com/bug-reporting/

TNSLSNR is failed when the no. of process exceeds.

Similar Messages

Maybe you are looking for