Tnsnames not working for connction creation

1.1.0.22
I believe this was working for me x.x.97 the previous release. Not working now. If I enter manually all is well.

I just checked. This worked fine in 1.1.0.21 and still does.
When I run 1.1.0.22 the network alias list is empty. Why all of sudden do I have to set an environment variable? I dont have to set the environment variable in the older version? Something has changed in this new build.

Similar Messages

  • Auto_lexer (stemming) not working for other languages(other than english)

    Hi All,
    We are planning to use AUTO_LEXER instead of MULTI_LEXER and observed that stemming is not working for German where as it is working for English when I use AUTO_LEXER. I even used query templates but of no use.
    But when i use MULTI_LEXER, creating sub lexers for German and Enlgish, Stemming is working for German also after changing the session language and setting stemmer of wod list to German (Which is expected).
    Following is the code for AUTO_LEXER creation:
    CREATE TABLE test_auto_lexer(pkey NUMBER(5,0),
    lang_index VARCHAR2(3),
    content_text CLOB,
    CONSTRAINT test_auto_lexer_pk primary key (pkey))
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (1,'eng','I drive a bike')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (2,'eng','I drove a bike')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (3,'eng','I have driven a bike')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (4,'eng','Just check for other things')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (5,'eng','always drive a car')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (6,'eng','it is nothing')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (7,'ger','Ich fahre ein Fahrrad')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (8,'ger','Ich fuhr ein Fahrrad')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (9,'ger','Ich habe ein Fahrrad gefahren')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (10,'ger','Aktivieren Sie einfach für andere Dinge')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (11,'ger','immer Auto fahren')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (12,'ger','es ist nichts')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (13,'ger','sprechen')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (14,'ger','sprach')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (15,'ger','gesprochen')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (16,'ger','tale')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (17,'ger','Indlæg')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (18,'ger','tales')
    BEGIN
    ctx_ddl.create_preference('auto_lexer1', 'auto_lexer');
    END;
    BEGIN
    ctx_ddl.set_attribute('auto_lexer1','index_stems','yes');
    END;
    BEGIN
    ctx_ddl.set_attribute('auto_lexer1','language','danish english german');
    END;
    BEGIN
    ctx_ddl.set_attribute('auto_lexer1','alternate_spelling','german');
    END;
    CREATE INDEX test_auto_lexer_ix1
    ON test_auto_lexer(content_text)
    INDEXTYPE IS ctxsys.context
    PARAMETERS ('datastore ctxsys.direct_datastore filter ctxsys.null_filter lexer auto_lexer1')
    select to_char(content_Text) from test_auto_lexer where contains(content_text,
    '<query>
    <textquery lang="ger" grammar="context">
    $fahren
    </textquery>
    <score datatype="integer"/>
    </query>') > 0
    this doesnt work even after changing the session language. My default Sesson language is AMERICAN.
    Could any one help me with this, in case I am missing something here. I would be really thankful.
    Edited by: Nagendra Prasad on Jan 23, 2010 12:05 AM

    In the future, please begin a new thread for a new question and provide a link to a related question.
    According to the online documentation, Oracle only supports stemming for English, Dutch, French, German, Italian, Spanish, and Japanese. Oracle does not support Russian stemming, although you may have gotten some accidental results, due to identifying it as a different language and applying stemming rules for that language. The following manual sections show the languages available for the index_stems attribute of the basic_lexer and stemmer attribute of the basic_wordlist:
    Basic_lexer attributes:
    http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#CIHHBAAD
    Basic_wordlist attributes:
    http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#g1019326
    Also, please see the following note:
    Features not available in 11.2.0.3:
    http://docs.oracle.com/cd/E11882_01/readmes.112/e22488/toc.htm#BABDGGDB
    "Certain Oracle Text functionality based on third-party technologies, including AUTO_LEXER and CTX_ENTITY, have been disabled in this release (reference Bug 12618046). For BASIC_LEXER, the usage of the INDEX_STEMS attribute values that depend on third-party technologies, is also affected. If this impacts an existing application, contact Oracle Support Services for guidance."
    Also, the auto_lexer has been replaced by the world_lexer, which only has one attribute:
    http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#BHCJEGFJ
    I don't work for Oracle, so I don't know why they do things the way they do.
    So, you need to stick with the basic_wordlist for stemming, not the lexers. However, you may get better performance by combining the multi_lexer with the basic_wordlist, as the multi_lexer eliminates time spent on automatic language detection. But, you need to remember not to use the index_stems with your lexer, since it will conflict with the wordlist. I am not experiencing any time problems as you have. Please see the demo below. I have provided the whole script below that, so that you can reproduce it on your system. If you still have problems, then it may be due to differences in versions.
    -- demo:
    SCOTT@orcl_11gR2> select * from v$version
      2  /
    BANNER
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE     11.2.0.1.0     Production
    TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    5 rows selected.
    SCOTT@orcl_11gR2> select value from v$nls_parameters
      2  where  parameter = 'NLS_CHARACTERSET'
      3  /
    VALUE
    AL32UTF8
    1 row selected.
    SCOTT@orcl_11gR2> DROP TABLE news
      2  /
    Table dropped.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> CREATE TABLE news
      2    (pkey            NUMBER,
      3       lang            VARCHAR2 (2),
      4       short_content  CLOB)
      5  /
    Table created.
    SCOTT@orcl_11gR2> INSERT ALL
      2  INTO news (pkey, lang, short_content)
      3    VALUES  (1, 'en', 'I drive a bike.')
      4  INTO news (pkey, lang, short_content)
      5    VALUES  (2, 'en', 'I drove a bike.')
      6  INTO news (pkey, lang, short_content)
      7    VALUES  (3, 'en', 'I have driven a bike.')
      8  INTO news (pkey, lang, short_content)
      9    VALUES  (4, 'en', 'I always drive a car')
    10  INTO news (pkey, lang, short_content)
    11    VALUES  (5, 'en', 'This is nothing')
    12  INTO news (pkey, lang, short_content)
    13    VALUES  (6, 'de', 'Ich fahre ein Fahrrad.')
    14  INTO news (pkey, lang, short_content)
    15    VALUES  (7, 'de', 'Ich fuhr ein Fahrrad.')
    16  INTO news (pkey, lang, short_content)
    17    VALUES  (8, 'de', 'Ich habe ein Fahrrad gefahren.')
    18  INTO news (pkey, lang, short_content)
    19    VALUES  (9, 'de', 'Ich habe immer ein Auto fahren.')
    20  INTO news (pkey, lang, short_content)
    21    VALUES  (10, 'de', 'Es ist nichts.')
    22  SELECT * FROM DUAL
    23  /
    10 rows created.
    SCOTT@orcl_11gR2> BEGIN
      2    -- word list:
      3    ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
      4    ctx_ddl.set_attribute      ('my_wordlist',   'stemmer',           'auto');
      5    -- english lexer:
      6    ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
      7    -- german lexer:
      8    ctx_ddl.create_preference ('german_lexer',  'basic_lexer');
      9    ctx_ddl.set_attribute      ('german_lexer',  'composite',       'german');
    10    ctx_ddl.set_attribute      ('german_lexer',  'alternate_spelling', 'german');
    11    ctx_ddl.set_attribute      ('german_lexer',  'mixed_case',       'no');
    12    ctx_ddl.set_attribute      ('german_lexer',  'base_letter',       'yes');
    13    -- multi_lexer:
    14    ctx_ddl.create_preference ('global_lexer',  'multi_lexer');
    15    ctx_ddl.add_sub_lexer      ('global_lexer',  'default',            'english_lexer');
    16    ctx_ddl.add_sub_lexer      ('global_lexer',  'german',            'german_lexer');
    17  END;
    18  /
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> create index search_news
      2  on news (short_content)
      3  indextype is ctxsys.context
      4  parameters
      5    ('lexer            global_lexer
      6        language column  lang
      7        wordlist       my_wordlist')
      8  /
    Index created.
    SCOTT@orcl_11gR2> EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> COLUMN short_content FORMAT A30
    SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
      2  /
    Session altered.
    SCOTT@orcl_11gR2> set timing on
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$drive') > 0
      3  /
          PKEY LA SHORT_CONTENT
             1 en I drive a bike.
             2 en I drove a bike.
             3 en I have driven a bike.
             4 en I always drive a car
    4 rows selected.
    Elapsed: 00:00:00.05
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$drove') > 0
      3  /
          PKEY LA SHORT_CONTENT
             1 en I drive a bike.
             2 en I drove a bike.
             3 en I have driven a bike.
             4 en I always drive a car
    4 rows selected.
    Elapsed: 00:00:00.05
    SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
      2  /
    Session altered.
    Elapsed: 00:00:00.01
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$fahr') > 0
      3  /
          PKEY LA SHORT_CONTENT
             6 de Ich fahre ein Fahrrad.
             7 de Ich fuhr ein Fahrrad.
             8 de Ich habe ein Fahrrad gefahren.
             9 de Ich habe immer ein Auto fahren
    4 rows selected.
    Elapsed: 00:00:00.07
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$fuhr') > 0
      3  /
          PKEY LA SHORT_CONTENT
             6 de Ich fahre ein Fahrrad.
             7 de Ich fuhr ein Fahrrad.
             8 de Ich habe ein Fahrrad gefahren.
             9 de Ich habe immer ein Auto fahren
    4 rows selected.
    Elapsed: 00:00:00.16-- script for you to reproduce the demo on your system:
    select * from v$version
    select value from v$nls_parameters
    where  parameter = 'NLS_CHARACTERSET'
    DROP TABLE news
    EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
    EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
    EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
    EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
    CREATE TABLE news
      (pkey           NUMBER,
       lang           VARCHAR2 (2),
       short_content  CLOB)
    INSERT ALL
    INTO news (pkey, lang, short_content)
      VALUES  (1, 'en', 'I drive a bike.')
    INTO news (pkey, lang, short_content)
      VALUES  (2, 'en', 'I drove a bike.')
    INTO news (pkey, lang, short_content)
      VALUES  (3, 'en', 'I have driven a bike.')
    INTO news (pkey, lang, short_content)
      VALUES  (4, 'en', 'I always drive a car')
    INTO news (pkey, lang, short_content)
      VALUES  (5, 'en', 'This is nothing')
    INTO news (pkey, lang, short_content)
      VALUES  (6, 'de', 'Ich fahre ein Fahrrad.')
    INTO news (pkey, lang, short_content)
      VALUES  (7, 'de', 'Ich fuhr ein Fahrrad.')
    INTO news (pkey, lang, short_content)
      VALUES  (8, 'de', 'Ich habe ein Fahrrad gefahren.')
    INTO news (pkey, lang, short_content)
      VALUES  (9, 'de', 'Ich habe immer ein Auto fahren.')
    INTO news (pkey, lang, short_content)
      VALUES  (10, 'de', 'Es ist nichts.')
    SELECT * FROM DUAL
    BEGIN
      -- word list:
      ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
      ctx_ddl.set_attribute     ('my_wordlist',   'stemmer',            'auto');
      -- english lexer:
      ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
      -- german lexer:
      ctx_ddl.create_preference ('german_lexer',  'basic_lexer');
      ctx_ddl.set_attribute     ('german_lexer',  'composite',          'german');
      ctx_ddl.set_attribute     ('german_lexer',  'alternate_spelling', 'german');
      ctx_ddl.set_attribute     ('german_lexer',  'mixed_case',          'no');
      ctx_ddl.set_attribute     ('german_lexer',  'base_letter',         'yes');
      -- multi_lexer:
      ctx_ddl.create_preference ('global_lexer',  'multi_lexer');
      ctx_ddl.add_sub_lexer     ('global_lexer',  'default',             'english_lexer');
      ctx_ddl.add_sub_lexer     ('global_lexer',  'german',              'german_lexer');
    END;
    create index search_news
    on news (short_content)
    indextype is ctxsys.context
    parameters
      ('lexer            global_lexer
        language column  lang
        wordlist         my_wordlist')
    EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
    COLUMN short_content FORMAT A30
    ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
    set timing on
    select * from news
    where  contains (short_content, '$drive') > 0
    select * from news
    where  contains (short_content, '$drove') > 0
    ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
    select * from news
    where  contains (short_content, '$fahr') > 0
    select * from news
    where  contains (short_content, '$fuhr') > 0
    /

  • Valid size not available for this creation when using Greeting Card feature

    Using PSE9 with a Mac.  When attempting to create a greeting card, after selecting the photo, the Greeting Card, I receive a pop up error message as follows:
    "Valid Size Not Available For This Creation".  (All other Create functions such as Photo Book, Photo Calendar, and Photo Collage appear to be working).  I have been in contact with Adobe Support and have been instructed to do a number of things from creating a new preferences file to uninstalling and re-installing the PSE software, with no result.  Has anyone else run into this problem, and if so have found a fix?  Thanks.

    I've been tearing my hair out over this one also. I've been on hold for over 10 hrs with Adobe Support waited over almost 2 weeks and still no resolution. I'm trying to create the Save the Date cards for my wedding and I can't wait for Adobe. Removing the preferences file and uninstalling/reinstalling does not fix the problem.
    That said I did figure out a workaround for this. It's easy but it does require Windows. For me this was no big deal as I do own a Windows box.
    Get the free trial version of PE9 for Windows and install it. If you don't have a Windows computer get to a friend that has one
    Upload some of your photos to the PE9 Windows Organizer (it's identical to the mac version)
    Select Create and then Greeting card. Photoshop will launch the guided edit feature for greeting cards.
    Select the Layout feature and once you find out that you like save it as Photoshop project. Repeat this step for as many layouts as necessary.
    Copy your Photoshop project files (and any folders) to your mac.
    Open the project files as you would with any other Photoshop file.
    You can now select the Create feature. You will be able add your pictures and resize them, you will be able to add/remove text, you'll be able to change the backgound/borders, add graphics...pretty much anything...EXCEPT automatically modify the layout. If you click on Layout, PE9 returns nothing. You can however go into full edit mode and if you have decent Photoshop skills you can make any changes to the layout manually.
    If I had to put money on this I'd say that there is a problem with the PE9 Mac installation package. For some reason it is not deploying the layout data/files or it is not putting them in the right place. For this reason the program can't find the layouts when the user selects the greeting card guided edit.
    Good luck.

  • IWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

    iWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

    There's no reason you can't go on using iWeb for this - with iWeb '08 you have to publish to a local folder (i.e. on your Mac) and then upload the contents of the folder (not the folder itself) to your hosting service: and you have to make sure you enter the new URL in the Publish information or the feed won't work properly; this done, an iWeb podcast should work fine.
    Of course there is still the problem that iWeb is not supported and sooner or later a system upgrade may break it. You could look at RapidWeaver: you can make podcasts with that, though the last time I looked into that - which was admittedly some time back - I didn't feel it was ideal for this. There are lots of other podcast creation programs or services around. WordPress is OK but it may be a bit of a steep learning curve: Libsyn is an online service that seems to work reliably. Blogger writes messy feeds but does usually work. Podcast Maker used to work well - I used it myself a few years back - but it rather looks as if it's gone moribund and it may not be reliable with Lion/Mountain Lion, so you would want to check into that.

  • Photoshop elements 12 "valid size not available for this creation"

    I see the message "valid size not available for this creation" when I am in organizer and  I try and go to create a collage, photo book or any of those options.  I have tried to see what other people have done by changing their location to usa/Canada but that didn't work for me.  Can you help me resolve this?  Thanks!

    The error means that Elements is experiencing problems calling up the templates from the media database. You may need to close elements and then rename or delete the following system file and then re-launch the software and wait whilst the database is re-created. find:
    Mediadatabase.db3
    The following link gives further information:
    http://helpx.adobe.com/photoshop-elements/kb/error-valid-size-available-creation.html

  • Valid Size not available for this Creation (Greeting card only) - Elements 10 for Mac

    I purchased Adobe Photoshop/Premiere Elements 10 for my MAC and am getting "VALID SIZE NOT AVAILABLE FOR THIS CREATION" when I try to create a GREETING CARD only.  All other options in CREATE work.
    I have read other forums on here and have tried everything they have said and it still does not work.  I have tried:
    opt, cmd and shift to delete preferences
    uninstalled and reinstalled
    performed updates on both my MAC and the program
    Can anyone PLEASE suggest other solutions to this problem?  Perhaps I am doing something wrong.  Thanks!

    Hi - My file structure is somewhat different than the file structure that you describe in the first part of your note (My system is Windows XP with Service Pack 3).  This is what my file structure looks like: 
        C:/Program Files/Adobe/Elements 10 Organizer/locales/en_US
             >application_swfs
             >Plug-Ins
             >Suppport Files
    No Creation Graphics folder, no Kodak Gallery Folder, no files with the name E9_preview_photocard_1(or2).jpg.
    I perfromed a hard drive search on filename E9_preview_photocard* and found these files under:
         C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\10.0\Locale\en_us\CreationGraphics\local
    I performed a hard drive search on Kodak Gallery and found the file under:
         C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\10.0\Locale\en_us\CreationGraphics\Kodak Gallery
    This Kodak Gallery folder contains 10 files, 2 of which appear to be related to Greeting Cards.  These are 5x7_adobe_folded_cards and 5x7_adobe_folded_cards_zoom
    Regarding the 235x120 greeting files, I search and found these under
         C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\10.0\Photo Creations\photo layouts
    NOW WHAT???
    thanks

  • "Valid size not available for this creation"

    I've installed the Photoshop Elements 10 with the language JP successfully, but Greeting Card does not work at all; "Valid size not available for this creation" (JP: この作品で使用できる有効なサイズがありません) can not be resolved, even though followed the instruction  (http://helpx.adobe.com/photoshop-elements/kb/error-valid-size-available-creation.html). MediaDatabase.db3 is on C:\ProgramData\Adobe\Photoshop Elements\10.0\Locale\ja_jp\. Pls. anybody help me on this !

    Try elvidgeg's solution in this thread:
    http://forums.adobe.com/message/4248143#4248143

  • I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

    I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

    Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

  • IPhone 6 External Mic not working for Siri/Dictation

    I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation.  When I plug in the earbuds, they work for everything (including Siri/Dictation).
    Was chatting to Apple support who had me reset all settings.  I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works).  When I turned Siri back on, it does not work.
    I have two questions for the community to see if you can help:
    1- I have been assuming this must be a software problem since the mic does work for non-Siri access.  But is that true?  Is there a hardware component that Siri depends on which could be faulty here?
    2- If it is software, what action should I try to address it?  I have done a reset all settings already and that did not help.
    Doug

    Hi, everyone.  I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again.  I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test.  If you can hear your voice recording clearly, then the mic works.  I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work.  So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls.  Will need to go back to Apple Genius this weekend for sure.  Will give update after the weekend.

  • CALLER ID not working for International incoming calls

    Hi,
    I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
    Any clue?

    yashshankar wrote:
    Hi
    I recently  purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
    Regards
    Yash
    You didn't mention what country your Online Number is in.  Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages.  If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way.  Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
    To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page.  You'll see a screen that would include your current Caller ID settings, and a link to change that.  If your Online Number is from one of those countries I referenced above, just select it and you're done. 
    Hope that helps!
    Patrick
    Location/Ubicacion: Arizona USA
    Time Zone/Hora Local: UTC/GMT -7
    If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
    Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
    I am not a Skype employee. No soy un empleado de Skype.

  • Select All in a table does not work for Drag and Drop

    Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
    I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
    I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
    I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
    Does anyone know how to get Select All to work for a Drag Source?
    Thanks.
    -Ed

    Frank-
    OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
    SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
    Thanks again for the reply.
    -Ed

  • Form Designed in LiveCycle will not work for End User

    Please Help!
    I am a newbie to Adobe LiveCycle but recognized the utility in the program, so decided to give it a while to try and streamline some of my employer's forms.  After spending too much time learning how to design a form (much to the dislike of my boss), I am finally going to have to ask for some help.  So here's the deal:
    I've designed a dynamic pdf in LiveCycle with two master pages and two repeating flowed subforms.  The first repeating subform is basically an expanding table intended to be used as a photographer's log where they can log each photo taken with the camera.  The expanding table has some code with a button at the top for the end user to enter the number of photos on the photo roll, click submit, and table expands to however many instances of rows are needed for each photo that was taken.  The second subform is basically an image field and text fields used as photo captions/photo compilation pages.  When the end user clicks submit on the first subform to expand the table, I also have javascript in that click event to also create same amouint of instances of the second subform (the photo compilation page(s)).  Each text field for the photo caption on the second subform is populated by the data entered into the photo log table cells.  I was able to find a script to correctly populate those fields for each instance of the table.  Wish I had the form here, but it's at work at the moment.
    My problem is this: I've scratched and clawed to get all of the forms expanding correctly and the scripts populating each instance of the fields correctly and everything works great in LiveCycle preview.  I then saved the form as PDF for use by my field crew personnel (whom all use, at the very least, Adobe Pro 9, but most Pro X).  I sent the new form to them and they move it to their desktop, open it with Adobe Pro, and populate all of the fields and everything works swimmingly.  However, once they save it, it gets all jumbled and they can't even print it.  We even thought we found a workaround by entering all data and printing to PDF, but even that has turned out to not work.  I checked to make sure that I designed and saved the form in LiveCycle for use with the Adobe Pro versions, but still not working for my end users.
    Anyone have any thoughts on my long explanation??  Please HELLLLPPPP!

    The error(s) occur when trying to save the document.  I want each user to tell the first page how many rows they will need in the photo log table, so they would enter however many photos were taken in the box: "Number of Photos on Roll:"  ---> Then click the "Submit" cmd button.  That should expand the table.  Once it expands, it should also add the same amount of instances of the photo compilation page (2nd Page) as there are rows in 1st page table.  Then the user will populate each cell of the table on page 1 with data.  The data entered into the page 1 table cells will populate the text fields (photo caption) in Page 2 once the user clicks on the "Populate Captions!" cmd button in the lower left corner of the table on Page 1. 
    The problem is in the distributing of the form to the user so they can save the form after populating the data.  I did a test run this morning and for some reason it did do the "print to PDF" correctly for 5 photos on the roll (though this has not been happening every time and especially for a large number of pages, ie. 80 photos).  However, after entering the data for 5 rows on page 1 and then populating the 5 photo compilation pages, I saved a copy as "Save As PDF" and closed the document.  Then re-opened the copy in Acrobat Pro X.  The new copy:
    -had 5 additional rows added to Page 1
    -Duplicates of some of the fields
    -Only retained the 1st instance of the Second Page (Photo w/ Caption) and not all fields were populated
    Again, this all works fine in the LiveCycle Preview but not anywhere else.  I do not have this set up to be linked to an external data source (YET) but there is javascript in the cmd buttons.  I also do not want to distribute this form to end users and then collect the data back from them.  I want them to be able to save a copy of my LiveCycle designed form, open in Adobe Pro, populate the data and save as many copies as needed for form production.

  • Wake on Demand: Not working for some services, others OK

    I haven't been able to figure this problem out... Wake on Demand for a previous generation Mac mini running Snow Leopard 10.6.8 works for things like a CrashPlan automated backup but does not work for things like remote SSH login or Screen Sharing. In all cases, the services are being originated on a latest generation iMac running Mac OS X Lion (10.7.2).
    While it's not an earth-shattering event to get off my backside and walk over to the Mac mini across the house to press its Shift key to waken the thing, it gets rather old to have to keep doing so, especially since CrashPlan automated backups are taking place while the Mac mini is otherwise asleep (the sleep indicator is slowly pulsing).
    I've been through the Apple tech notes regarding Wake on Demand for Snow Leopard 10.6 and have ensured that AirPort and its network are at the top-most position in their respective lists. Other than that, I'm not sure what else I can do. Wake on Network is enabled in the Snow Leopard Mac mini's network System Preferences and there doesn't seem to be any on/off option in the AirPort Extreme base station (just recently updated to 7.6 firmware).
    Any thoughts... hints... suggestions?
    One final note: this Mac mini is new as of July 2011; just days before the latest generation of Mac mini came out. It came pre-installed with Snow Leopard and, as soon as the users of this mini find software replacements for the old PPC style applicaitons they're used to using, will be upgraded to Lion. However, I feel a bit unsettled in making the move to Lion if I can't get a Snow Leopard feature to work properly. There's no telling if the Lion upgrade will actually fix this behavior or make it worse.
    Thanks in advance.

    I don't think you can wake on network with a closed lid. Try keeping the lid open and putting the machine to sleep. Does it work?

  • DNS not working for some computers

    We have a SRP521W router and is set up with one SSID for wireless. In our office all the computers (5) can connect but only some may get on the internet. I have a laptop I am testing with and it will not connect, wired or wireless.
    I found an article relating to flushing DNS, tried that, no luck.
    I found another that said I should try setting my DNS to 208.67.222.222 and this worked, internet works fine.
    I tried rebooting the DSL modem and router, tried many different things but am not a networking guru so I am just not sure why the DNS is not working for one computer but works for another, connected to same LAN or SSID.
    Thanks,
    Brad

    Though what Don posted is one way to accomplish it, I never add anything to my DNS and it works fine.  Windows DNS, in a default installation, will automatically forward to the root (.com, .edu, .gov, etc.).  So I always just point my workstations
    to my Domain Controller as their DNS and everything works just fine without any additional configuration.
    Guess I'm one of those who won't even trust Google for sharing a DNS, particularly when I have never needed to set up any forwarders.
    .:|:.:|:. tim

  • Thunderbird Mission Control Desktop/AutoConfig not working for some users

    I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\defaults\pref\custom.js"
    It contains:
    pref("general.config.obscure_value", 0);
    pref("general.config.filename", "TMcustom.cfg");
    I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\TMcustom.cfg"
    It contains:
    var promptService = Components.classes["@mozilla.org/embedcomp/prompt-service;1"]
    .getService(Components.interfaces.nsIPromptService);
    promptService.alert(null, "title", "testing");
    For most of my users the alert pops up fine when I start Thunderbird, but for a few it doesn't. All of the machines where setup with the same install script. If I log into one of the machines where it's not working as a different user, then it works fine, so I know the files are in the right spot. So why would it not work for specific users? Is there something in the user's Windows profile that could cause it to not work? Or are there any other suggestions?

    As it turns out this was a known bug that was corrected in the recent release of Java 7_65 and Java 8_11. Here is a link to the bug description in the database.
    Bug ID: JDK-8019274 RMI thread can no longer call out to AWT thread for webstart app

Maybe you are looking for