Tnsping.exe using 90% of my CPU time . HOW TO SOLVE IT?

Hi,
While im runnning my application which is using Oracle 10.1 release database(OS Windows XP) tnsping.exe is using 90% of CPU Shocked (while i check in Task Manager).Please help me to resolve this problem.
With Regards
SUVIN PRATHAB
www.sceneworks.co.cc

Sorry,
Assuming 'processing a check' is considered to constitute a transaction, and Oracle can measure transaction time (which it can), why would employees need to enter this?
That doesn't make any sense.
Also, you need to check with the original developers why tnsping is called and, above all, where tnsping is called.
This call should be removed, and the tnsping process should be stopped.
Running tnsping continually doesn't make any sense.
However, you can not solve the problem. The application vendor should be called into action, and your client should replace the application asap.
Sybrand Bakker
Senior Oracle DBA

Similar Messages

New x301 - Taskmgr.exe uses "constant" amount of CPU. My t60 does not why?

When I click on "Start Task Manager" I notice that even with ALL programs closed, the only process to use CPU between 2% and 10% is the Task manager (taskmgr.exe).
I also have a t60 (xp pro sp3) and noticed that task manager users 0% CPU. I know its not absolute zero but not enough to count as 1% and does not kept using up CPU.
This is my first 64 bit system. It's 1.4 dual core with 4gb ram and 128gb solid state drive.
Why is taskmgr.exe using up so much CPU %? How can this be fixed?
Anyone else with an x301 or 64bit lenovo with this similar behavior?
Thanks

anyone?

Firefox is using large amounts of CPU time and disk access, and I need to know how to shut down most of this so I can actually use the browser.

Firefox is a very busy piece of software. It's using large amounts of CPU time and disk access. It puts my usage at low priority, so I have to wait for some time to be able to use my pointer or keyboard. I don't know what it uses all that CPU and disk access time for, but it's of no use to me. It often takes off with massive use of resources when I'm not doing anything, and I may not have use of my pointer for several minutes. How can I shut down most of this so I can use the browser to get my work done. I just want to use the web site access part of the software, and drop all the extra. I don't want Firefox to be able to recover after a crash. I just want to browse with a minimum of interference from Firefox. I would think that this is the most commonly asked question.

Firefox consumes a lot of CPU resources
* https://support.mozilla.com/en-US/kb/Firefox%20consumes%20a%20lot%20of%20CPU%20resources
High memory usage
* https://support.mozilla.com/en-US/kb/High%20memory%20usage
Check and tell if its working.

I have two different accounts on my iMac 2011 OSX 10.8.2. When you type text in one account, he dialed in the second account at a time. how to solve it?

I have two different accounts on my iMac 2011 OCX 10.8.2. When you type text in one account, he dialed in the second account at a time. how to solve it?

I have 2 users on the imac. when entering text in the first account it is duplicated in the second

When closing Firefox (v:3.6.13), using the red "close" button, the firefox.exe process remaines at top of the "Windows Task Manager" window and continues to use the majority of CPU time.

After an attempt to close the Mozilla Firefox page, on every occasion, the firefox.exe process is found at the top of the list when ordering the listed 'processes' by CPU time... even though the web page is gone.
If an attempt is made to restart Mozilla, the system declares that the current Mozilla process should be closed.
If the firefox.exe process is explicitly closed in the Task Manager, only then can Firefox be restarted.

Does that also happen if you use File > Exit Firefox?
See also "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

Nipalsm.exe using up 50% of CPU time

Hello Everyone:
I'm having a problem using labview 8.6 on a Dell Dual core E6500 labtop. The computer started acting very sluggish and I've noticed that even when labview is not running, the Nipalsm.exe is using up 50% of the CPU time. I've tried reinstalling labview but it hasn't work. I went back and checked an older computer running labview 7.1 and on that computer nipalsm.exe is using at most 1%.
Best Regards,
Mark

This isn't LV related, but some driver stuff (DAQ, DAQmx, DMM, ....). So try reinstalling those. Maybe you could also get a diffrent version (older ones by supplied CDs, newer ones by download from NI).
If you have any support contract (and that should be if you recently bought that hardware), phone your NI rep, as it might be beyond the scope of the community to solve these issues.
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

SLAPD.EXE taking a lot of CPU Time

Hi all,
I'm getting this stange issue on our Dev Boxes, when trying to launch a business rule, a process called slapd.exe (Open Ldap) takes up to 50 / 60 % of CPU time and it takes about 1 to 2 min for the prompts on the business rules to appear.
The system just seems to hang ...
Please let me know if you know how to resolve this,
Cheers,
Jeremie

Hi,
I came across tip for speeding up OpenLdap a while ago, I have never tested it as I have never found the need to but here it is :-
Stop the OpenLdap service
Open slapd.conf which is under SharedServices\openLDAP\
Locate
*# Indices to maintain*
index objectClass eq
index cn,ou,cssIdentity,member,cssRoleDN,cssProductCode,cssVersion eq
index cssDisplayNameDefault eq,sub
and add
index uniqueMember eq
Save/Close
run slapindex.exe -f c:\<location to slapd.conf>\slapd.conf
Start up OpenLdap service again.
Though this doesn't explain the reason why you are suddenly getting performance issues, do you have a large amount of native users/groups ?
If you are on 9.3.1 have you tried Sync Native Directory from Shared Services.
Cheers
John
http://john-goodwin.blogspot.com/

Plugin container exe uses half of the cpu and that heats the motherboard, cores. some times temperature in motherboard is about 90 degree which is unacceptable. it is like that even only one page or tab is open. regards

computer features(hp pavilion dv5)
intel centrino2 inside
2.26 hz,
4gb of ram,

Ive downgraded from FF4 to 3.6 at this point. The CPU usage is out of control on OS X.

Xorg using 5-40% of CPU time all the time

After upgrade of kernel to 2.6.27.7-1, the xorg daemon uses 5% of cpu usage doing nothing and up about to 40% on basic usage of firefox. My cpu is a Core2Duo 2.2GHz. I try instaling new versions of xorg and nvidia but the problem persists. Any ideas? My xorg.conf:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
InputDevice "SynapticsTouchpad" "SendCoreEvents"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
Section "Files"
# RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
#Load "type1"
Load "freetype"
Load "glx"
Load "synaptics"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "yes"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "SynapticsTouchpad"
Driver "synaptics"
Option "AlwaysCore" "true" # send events to CorePointer
#Option "Device" "/dev/input/mice"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "SHMConfig" "false" # configurable at runtime? security risk
Option "LeftEdge" "1700" # x coord left
Option "RightEdge" "5300" # x coord right
Option "TopEdge" "1700" # y coord top
Option "BottomEdge" "4200" # y coord bottom
Option "FingerLow" "25" # pressure below this level triggers release
Option "FingerHigh" "30" # pressure above this level triggers touch
Option "MaxTapTime" "180" # max time in ms for detecting tap
Option "VertEdgeScroll" "true" # enable vertical scroll zone
#Option "HorizEdgeScroll" "true" # enable horizontal scroll zone
Option "CornerCoasting" "true" # enable continuous scroll with finger in corner
Option "CoastingSpeed" "0.30" # corner coasting speed
Option "VertScrollDelta" "100" # edge-to-edge scroll distance of the vertical scroll
Option "HorizScrollDelta" "100" # edge-to-edge scroll distance of the horizontal scroll
Option "MinSpeed" "0.10" # speed factor for low pointer movement
Option "MaxSpeed" "0.60" # maximum speed factor for fast pointer movement
Option "AccelFactor" "0.0020" # acceleration factor for normal pointer movements
Option "VertTwoFingerScroll" "true" # vertical scroll anywhere with two fingers
#Option "HorizTwoFingerScroll" "true" # horizontal scroll anywhere with two fingers
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600M GT"
Option "NoLogo" "True"
Option "TripleBuffer" "1"
Option "BackingStore" "True"
Option "OnDemandVBlankInterrupts" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Last edited by alessandro_ufms (2008-12-01 12:47:37)

I install nvidia-beta from AUR, but this issue still happens.
Some sites which almost freezes Firefox works better now (look this thread: http://bbs.archlinux.org/viewtopic.php?id=50776), but youtube videos crashes Firefox aleatory here.

Sockd process uses a lot of CPU time

Hi,
I'm running the Sun Java System Web Proxy Server version 4.02 on a SunFire V210 dual processor box running Solaris 10 with the default socks5.conf for testing.
Just browsing a few web pages in Firefox or IE using the socks proxy boosts CPU usage from the sockd process to a staggering 50% and stay there for several minutes.
Comparing with the old NEC reference Socks5 daemon the Sun version is really performing badly.
The system is pretty standard though I have tuned /etc/system and the tcp stack using recommendations in the proxy administration manual. All Solaris 10 patches are installed.
prstat output:
   PID USERNAME SIZE   RSS STATE PRI NICE      TIME CPU PROCESS/NLWP
24519 proxy    6664K 4384K cpu1     0   10   0:11:18 50% sockd/43Any ideas what's wrong or do I have to stick with the old NEC reference daemon?
Regards
Kasper L�vschall

Using:
truss -dlfo truss.out ./sockd-wdog
Where things begin to happen:
5259/1:          11.2858     lwp_park(0xFFBFF290, 0)                    Err#62 ETIME
5259/1:          12.2958     lwp_park(0xFFBFF290, 0)                    Err#62 ETIME
5259/1:          13.3058     lwp_park(0xFFBFF290, 0)                    Err#62 ETIME
5259/1:          14.3158     lwp_park(0xFFBFF290, 0)                    Err#62 ETIME
5259/2:          15.1858     pollsys(0xFEAEFDC8, 1, 0xFEAEFD58, 0x00000000)     = 0
5259/1:          15.3258     lwp_park(0xFFBFF290, 0)                    Err#62 ETIME
5259/2:          pollsys(0xFEAEFDC8, 1, 0xFEAEFD58, 0x00000000) (sleeping...)
5259/1:          lwp_park(0xFFBFF290, 0)          (sleeping...)
5259/1:          16.3359     lwp_park(0xFFBFF290, 0)                    Err#62 ETIME
5259/1:          lwp_park(0xFFBFF290, 0)          (sleeping...)
5259/1:          17.3459     lwp_park(0xFFBFF290, 0)                    Err#62 ETIME
5259/2:          18.2382     pollsys(0xFEAEFDC8, 1, 0xFEAEFD58, 0x00000000)     = 1
5259/2:          18.2385     accept(3, 0xFEAEFEC8, 0xFEAEFE64, SOV_DEFAULT)     = 5
5259/2:          18.2386     lwp_unpark(43)                         = 0
5259/43:     18.2386     lwp_park(0x00000000, 0)                    = 0
5259/2:          18.2388     accept(3, 0xFEAEFEC8, 0xFEAEFE64, SOV_DEFAULT)     Err#11 EAGAIN
5259/43:     18.2389     getsockname(5, 0xFE5AFEA8, 0xFE5AFDA4, SOV_DEFAULT) = 0
5259/43:     18.2391     getpeername(5, 0xFE5AFE38, 0xFE5AFDA4, SOV_DEFAULT) = 0
5259/43:     18.2391     read(5, 0x00063B7E, 1)                    Err#11 EAGAIN
5259/43:     18.2407     pollsys(0xFE5AFD08, 1, 0xFE5AFCA0, 0x00000000)     = 1
5259/43:     18.2408     read(5, "04", 1)                    = 1
5259/43:     18.2409     read(5, "01\0 P BF9 ] c", 7)               = 7
5259/43:     18.2411     read(5, " k l\0", 255)                    = 3
5259/43:     18.2412     write(4, " [ 0 1 / M a r / 2 0 0 6".., 88)     = 88
5259/43:     18.2413     so_socket(PF_INET, SOCK_STREAM, IPPROTO_IP, "", SOV_DEFAULT) = 6
5259/43:     18.2414     fcntl(6, F_GETFL)                    = 2
5259/43:     18.2415     fcntl(6, F_SETFL, FWRITE|FNONBLOCK)          = 0
5259/43:     18.2416     bind(6, 0xFE5AF980, 16, SOV_SOCKBSD)          = 0
5259/43:     18.2418     connect(6, 0xFE5AF910, 16, SOV_DEFAULT)          Err#150 EINPROGRESS
5259/43:     18.2970     pollsys(0xFE5AF798, 1, 0xFE5AF730, 0x00000000)     = 1
5259/43:     18.2971     getsockopt(6, SOL_SOCKET, SO_ERROR, 0xFE5AF6D0, 0xFE5AF6D4, SOV_DEFAULT) = 0
5259/43:     18.2972     getsockname(6, 0xFE5AF980, 0xFE5AF8A4, SOV_DEFAULT) = 0
5259/43:     18.2973     write(5, "\0 Z918782E1 511", 8)               = 8
5259/43:     18.2974     lwp_unpark(3)                         = 0
5259/3:          18.2974     lwp_park(0x00000000, 0)                    = 0
5259/3:          18.2977     brk(0x00064850)                         = 0
5259/3:          18.2977     brk(0x00078850)                         = 0
5259/3:          18.2981     pollsys(0xFEACF458, 50, 0xFEACF3E8, 0x00000000)     = 0
5259/3:          18.2982     pollsys(0xFEACF458, 50, 0xFEACF3E8, 0x00000000)     = 0
5259/3:          18.2983     pollsys(0xFEACF458, 50, 0xFEACF3E8, 0x00000000)     = 0Then loades of pollsys(0xFEACF458, 50, 0xFEACF3E8, 0x00000000)     = 0 until I kill the daemon - seems like they are killing the server?
Thanks,
Kasper

DSC software using 100 percent of CPU time.

nicitidl5.exe running even after shutdown.

Hello,
What versions of LabVIEW and DSC are you running?
Are you seeing this behavior on multiple computers?
Do you see the cpu problem only when (and after) there's an application running? If so, what kind of tags do you have in your application?
Do you get any errors while shutting down the application/computer? If so, what are the exact error messages?
Please respond to the questions above and feel free to add any other details regarding the problem.
Best regards,
Yusuf C
Applications Engineer
National Instruments

Firefox.exe* uses large amount of cpu 40-50%

My computer slows and task manager shows firefox.exe* very large cpu usage.

You can try to disable OMTC and leave hardware acceleration in Firefox enabled.
*about:config page: layers.offmainthreadcomposition.enabled = false
You can open the about:config page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check if there is an update for your graphics display driver and check for hardware acceleration related issues.
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

Can't use I messager or face time how do get these apps running?

Tru signing in with apple Id but says check connection which is nothing wrong with connection what am I doing wrong ?

FaceTime Support
http://www.apple.com/support/mac/facetime/getstarted/
Note: FaceTime may not be available in all countries or regions.

Address in use after installation of mapviewer 10131: how to solve this?

Hi,
I had installed mapviewer early acces release, and decided to migrate to mapviewer 10131 (to use oracle maps).
I deleted the old directories and installed from scratch the new release.
When I start oc4j, the http-server fails to start (default web site.xml) due to address (localhost:8888) in use.
What do I have to do to solve this problem ?
Any reaction will be appreciated.
Leo

Leo,
To make the address 8888 available, you need to kill the application (OC4J or something else) that is using it. You could try to reboot your machine, to see if this port becomes available.
If the address is still in use, then look under the standalone OC4J directory "oc4j\j2ee\home\config", where there is a file default-web-site.xml. There you will find a <web-site> tag where you have a port number that you can change.
<web-site
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/web-site-10_0.xsd"
protocol="http"
port="8888"
display-name="OC4J 10g (10.1.3) Default Web Site"
schema-major-version="10"
schema-minor-version="0"
>Joao

Trying to set up an apple id for my daughter but it says that the apple id already exists...but it shouldnt as she has been using my account! not sure how to solve this problem ??

I have an apple id myself which my children share, i am trying to set up an apple id for my daughter but it says that the id already exists?? which it shouldnt!
I have tried taking her Mac and ipod off my devices but it still wont let me set it up!! any ideas anyone??

Hello, Wyseup.
Thank you for visiting Apple Support Communities.
Most likely this email address has been attempted to be setup as an Apple ID at some point. You can reset your Apple ID password via the steps in the first article below. If you do not have access to the email account, need assistance or are not receiving the password reset link, see the second article.
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H.

Tnsping.exe using 90% of my CPU time . HOW TO SOLVE IT?

Similar Messages

Maybe you are looking for