Tnsping issues for oracle 10g standby setup

Hi All, i'm setting up standby database,
i'm getting below error while doing tnsping after made all the necessary entries in listene.ora and tnsnames.ora,
in both server listener is up and running.
Please suggest me on this to resolve the issue,
Primary Site
tnsping DEVP
TNS Ping Utility for Solaris: Version 10.2.0.2.0 - Production on 24-OCT-2011 16:09:59
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/arch/oracle/devora/ora10g/network/admin/DEVP_mareno/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =alpha)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = DEVP)))
OK (10 msec)
tnsping DEVPDR
TNS Ping Utility for Solaris: Version 10.2.0.2.0 - Production on 24-OCT-2011 16:08:37
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/arch/oracle/devora/ora10g/network/admin/DEVP_mareno/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = beta)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = DEVPDR)(UR=A)))
TNS-12541: TNS:no listener
Standby site
tnsping DEVPDR
TNS Ping Utility for Solaris: Version 10.2.0.2.0 - Production on 24-OCT-2011 10:21:08
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oracle/soft/ora10g/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = beta)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = DEVPDR)(UR=A)))
OK (10 msec)
tnsping DEVP
TNS Ping Utility for Solaris: Version 10.2.0.2.0 - Production on 24-OCT-2011 10:21:29
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oracle/soft/ora10g/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = alpha)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = DEVP)))
TNS-12541: TNS:no listener

Hi,
Now tnsping is working in primary site of both
but from standby site,
Used parameter files:
/oracle/soft/ora10g/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = beta.pati.com)(PORT = 1524)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = DEVP)))
TNS-12541: TNS:no listener
Please suggest me on this.

Similar Messages

Data pump issue for oracle 10G in window2003

Hi Experts,
I try to run data pump in oracle 10G in window 2003 server.
I got a error as
D:\>cd D:\oracle\product\10.2.0\SALE\BIN
D:\oracle\product\10.2.0\SALE\BIN>expdp system/xxxxl@sale full=Y directory=du
mpdir dumpfile=expdp_sale_20090302.dmp logfile=exp_sale_20090302.log
Export: Release 10.2.0.4.0 - Production on Tuesday, 03 March, 2009 8:05:50
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Produc
tion
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-31626: job does not exist
ORA-31650: timeout waiting for master process response
However, I can run exp codes and works well.
What is wrong for my data pump?
Thanks
JIM

Hi Anand,
I did not see any error log at that time. Actually, it did not work any more. I will test it again based on your emial after exp done.
Based on new testing, I got below errors as
ORA-39014: One or more workers have prematurely exited.
ORA-39029: worker 1 with process name "DW01" prematurely terminated
ORA-31671: Worker process DW01 had an unhandled exception.
ORA-04030: out of process memory when trying to allocate 4108 bytes (PLS non-lib hp,pdzgM60_Make)
ORA-06512: at "SYS.KUPC$QUEUE_INT", line 277
ORA-06512: at "SYS.KUPW$WORKER", line 1366
ORA-04030: out of process memory when trying to allocate 65036 bytes (callheap,KQL tmpbuf)
ORA-06508: PL/SQL: could not find program unit being called: "SYS.KUPC$_WORKERERROR"
ORA-06512: at "SYS.KUPW$WORKER", line 13360
ORA-06512: at "SYS.KUPW$WORKER", line 15039
ORA-06512: at "SYS.KUPW$WORKER", line 6372
ORA-39125: Worker unexpected fatal error in KUPW$WORKER.DISPATCH_WORK_ITEMS while calling DBMS_METADATA.FETCH_XML_CLOB [PROCOBJ:"SALE"."SQLSCRIPT_2478179"]
ORA-06512: at "SYS.KUPW$WORKER", line 7078
ORA-04030: out of process memory when trying to allocate 4108 bytes (PLS non-lib hp,pdzgM60_Make)
ORA-06500: PL/SQL: storage error
ORA-04030: out of process memory when trying to allocate 16396 bytes (koh-kghu sessi,pmucpcon: tds)
ORA-04030: out of process memory when trying to allocate 16396 bytes (koh-kghu sessi,pmucalm coll)
Job "SYSTEM"."SYS_EXPORT_FULL_01" stopped due to fatal error at 14:41:36
ORA-39014: One or more workers have prematurely exited.
the trace file as
*** 2009-03-03 14:20:41.500
*** ACTION NAME:() 2009-03-03 14:20:41.328
*** MODULE NAME:(oradim.exe) 2009-03-03 14:20:41.328
*** SERVICE NAME:() 2009-03-03 14:20:41.328
*** SESSION ID:(159.1) 2009-03-03 14:20:41.328
Successfully allocated 7 recovery slaves
Using 157 overflow buffers per recovery slave
Thread 1 checkpoint: logseq 12911, block 2, scn 7355467494724
cache-low rba: logseq 12911, block 251154
on-disk rba: logseq 12912, block 221351, scn 7355467496281
start recovery at logseq 12911, block 251154, scn 0
----- Redo read statistics for thread 1 -----
Read rate (ASYNC): 185319Kb in 1.73s => 104.61 Mb/sec
Total physical reads: 189333Kb
Longest record: 5Kb, moves: 0/448987 (0%)
Change moves: 1378/5737 (24%), moved: 0Mb
Longest LWN: 1032Kb, moves: 45/269 (16%), moved: 41Mb
Last redo scn: 0x06b0.9406fb58 (7355467496280)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 3
Average hash chain = 35384/25746 = 1.4
Max compares per lookup = 3
Avg compares per lookup = 847056/876618 = 1.0
*** 2009-03-03 14:20:46.062
KCRA: start recovery claims for 35384 data blocks
*** 2009-03-03 14:21:02.171
KCRA: blocks processed = 35384/35384, claimed = 35384, eliminated = 0
*** 2009-03-03 14:21:02.531
Recovery of Online Redo Log: Thread 1 Group 2 Seq 12911 Reading mem 0
*** 2009-03-03 14:21:04.718
Recovery of Online Redo Log: Thread 1 Group 1 Seq 12912 Reading mem 0
*** 2009-03-03 14:21:16.296
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 3
Average hash chain = 35384/25746 = 1.4
Max compares per lookup = 3
Avg compares per lookup = 849220/841000 = 1.0
*** 2009-03-03 14:21:28.468
tkcrrsarc: (WARN) Failed to find ARCH for message (message:0x1)
tkcrrpa: (WARN) Failed initial attempt to send ARCH message (message:0x1)
*** 2009-03-03 14:26:25.781
kwqmnich: current time:: 14: 26: 25
kwqmnich: instance no 0 check_only flag 1
kwqmnich: initialized job cache structure
ktsmgtur(): TUR was not tuned for 360 secs
Windows Server 2003 Version V5.2 Service Pack 2
CPU : 8 - type 586, 4 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:7447M/8185M, Ph+PgF:6833M/9984M, VA:385M/3071M
Instance name: vmsdbsea
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Windows thread id: 2460, image: ORACLE.EXE (SHAD)
Dynamic strand is set to TRUE
Running with 2 shared and 18 private strand(s). Zero-copy redo is FALSE
*** 2009-03-03 08:06:51.921
*** ACTION NAME:() 2009-03-03 08:06:51.905
*** MODULE NAME:(expdp.exe) 2009-03-03 08:06:51.905
*** SERVICE NAME:(xxxxxxxxxx) 2009-03-03 08:06:51.905
*** SESSION ID:(118.53238) 2009-03-03 08:06:51.905
SHDW: Failure to establish initial communication with MCP
SHDW: Deleting Data Pump job infrastructure
is it a system memory issue for data pump? my exp works well
How to fix this issue?
JIM
Edited by: user589812 on Mar 3, 2009 5:07 PM
Edited by: user589812 on Mar 3, 2009 5:22 PM

Error while creating datasource userdsn for oracle 10g Errorcode (998)

while creating datasource userdsn for oracle 10g i am getting error "The setup routines for the oracle in OraDb10g_home1 odbc driver could not be loaded due to system error code 998" please give reply soon

Thanks for your reply , Steve.
I noticed that there is a default datasouce on the EM with the following parameters:
<data-source
          class="com.evermind.sql.DriverManagerDataSource"
          name="OracleDS"
          location="jdbc/OracleCoreDS"
          xa-location="jdbc/xa/OracleXADS"
          ejb-location="jdbc/OracleDS"
          connection-driver="oracle.jdbc.driver.OracleDriver"
          username="scott"
          password="->pwForScott"
          url="jdbc:oracle:thin:@localhost:1521:oracle"
          inactivity-timeout="30"
     />
The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
What should be the values for location and xa-location attributes from my "test" data source?
Any help will be greatly appreciated.
Thanks,
Shyam

Can't Create the ODBC connection for Oracle 10g

Hi,
I am working with Oracle 10g Database Release 2 in windows XP professional. I am trying to create an ODBC connection for oracle but become failure because its generating the following errors:
system error code 998
could not locate the setup or translator library
Please help me how can I solve this problem and create the ODBC connection for oracle 10g database.
Best Regards,

mwz wrote:
I am trying to create an ODBC connection for oracle but become failure because its generating the following errors:
system error code 998
could not locate the setup or translator libraryThe symptom described is typical of an incorrect system env PATH setting (used by the data source admin tool), compared to that of the Oracle Home (specifically, path $OH/bin). The odbc driver config routine will search directories listed in PATH variable for necessary libraries (Client dll's). If some library fails to load (from e.g. oraoci*.dll or oraclient10.dll) it will probably error out, as in your case.
Are you creating the odbc dsn on the databse server host or on some other machine? I.e. are you using the db host as a client or not?

SUNWsprox package with solaris 10 for Oracle 10g Installation....

Hi
I am in problem with a Solaris 10 package "SUNWsprox - Sun workshop Bundled 64-bit make library" for Oracle 10g Installation. I checked the CDs (In the /.../products) but did't found this packege. Can any one tell me please can I go without this package or where I found this package...Please Its very URGENT for me....
Thanks
Mohammed Tanvir

Hi...
I had the same issue, but found out that the SUNWsprox was replaced by SUNWsprot. The OUI 10.1 Release 2 will 'pass' as the doco in the Oracle quick install guide is wrong (as well as 10g Application Server).
The only way to lay a 10g Release database on Solaris 10 is to lay the software doen only, then cd in the .../bin directory, step your Rdbms ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH and of course the DISPLAY (is X-windowing into the server), and run dbca manually. Oracle 10g is a bit buggy.
Roger

Archiving Best Practices / How To Guide for Oracle 10g - need urgently

Hi,
I apologize if this is a silly question. But i need a step by step archiving guide for Oracle 10g and cannot find any reference document. I am in a rather remote part of S.E. Asia & can't seem to find DBA's with the requisite experience to do the job properly. I have had 1 database lock up this week at a big telecoms provider and another one at a major bank is about to go. I can easily add LUNS & re-structure mirrors etc at the Unix level [ i am a Unix engineer ]
but i know that is not the long run solution. I am sure the 2 databases i am concerned about have never been archived properly.
This is the sort of thing DBA's must do all the time. Can someone point me to the proper documentation so i can do a proper job and archive a few years data out of these databases. I do not want to do a hack job. At least i can clone the databases and practise on the clones first before i actually do production.
-thanks very much
-gregoire
[email protected]

I'm not so sure this is a general database question, as it would be specific to an application and implementation, and as the technology has changed, the database options to support it has too.
So for example, if you have bought the partitioning option, there may be some sensible procedure for partitioning off older data.
Things may depend on whether you are talking about an OLTP, a DW, a DSS, or mixed systems.
DBA's do it all the time because the requirements are different everywhere. Simply deleting a lot of data after copying the old data to another table (as some older systems do) may just wind up giving you performance problems scanning swiss-cheesed data.
Some places may not archive at all, if they've separated out OLTP from reporting. If all the OLTP stuff is accessed through indices, all the older stuff just sits there. The reporting DB may only have what is needed to be reported on, or be on a standby db where range scans are sufficient to ignore old data. There there's exadata, which has it's own strengths.
Best Practices have to be on similar enough systems, otherwise they are a self-contradiction.
Get yourself someone who understands your requirements and can evaluate the actual problem. No apology needed, it is not a silly question. But what is silly is assuming what the problem is with no evidence.

Oracle gateway for Oracle 10g DB on Windows 64 bit server

Is there any place that I can find Oracle dateway for Oracle 10g DB on Windows 64 bit server? I can only find Gateway for Oracle 11g on Windows 32 bit server. Please help me to identify this. Thanks.

yingkuan:
Thanks a lot. The link tells the details. It seems that Oracle has not release Gateway for Oracle database 10.2.0.x on Windows 64 bit server. Probably they don't do it.
So under this circumstance, if I want to install Gateway (32 bit) on Oracle 10.2.0.3 DB on Windows 64 bit server for Teradata, I probably have to install Gateway software in another Oracle Home, then configure it right. Please give more advice on this. 32 bit Gateway will work for 64 bit database?

Long-term retention backup strategy for Oracle 10g

Hello,
I need design a Archivelog, Level 0 and Level 1 long-term retention backup strategy for Oracle 10g, It must be based in Rman with tapes.
¿Somebody could tell me what it's the best option to configure long-term retention backups in Oracle?, "CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 1825 DAYS;" It's posibble ?
Regards and thanks in advance

Hello;
RECOVERY WINDOW is an integer so yes its possible. Does it make sense?
Later My bad, this is Oracle 11 only ( the gavinsoorma link ) . Getting harder and harder to think about 10. Don't think I would use RECOVERY WINDOW.
I would let the tape backup system handle the retention of your rman backups.
Using crosscheck and delete expired commands you can keep the catalog current with the available backups on tape.
Oracle 10
Keeping a Long-Term Backup: Example
http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmbackp.htm#i1006840
http://web.njit.edu/info/oracle/DOC/backup.102/b14191/advmaint005.htm
Oracle 11
If you want to keep 5 years worth of backups I might just use KEEP specific date using the UNTIL TIME clause :
keep until time 'sysdate+1825'More info :
RMAN KEEP FOREVER, KEEP UNTIL TIME and FORCE commands
http://gavinsoorma.com/2010/04/rman-keep-forever-keep-until-time-and-force-commands/
Best Regards
mseberg
Edited by: mseberg on Dec 4, 2012 7:20 AM

Note 830576 - Parameter recommendations for Oracle 10g

hi all DBA experts.
I am not good familiar with Oracle database while i read a Note 830576 - Parameter recommendations for Oracle 10g. in which SAP General Recommendation:
You should delete obsolete initialization parameters from the profile.
To determine which obsolete parameters are currently set, proceed as follows:
SQL> SELECT NAME FROM V$OBSOLETE_PARAMETER WHERE ISSPECIFIED = 'TRUE';
when i execute above command then result is no rows selected
while there are many parameters in above SAP Note which are already obsolete and not set in initSID.ora file.
for exp. the parameter OPTIMIZER_INDEX_COST_ADJ is showing
#### OPTIMIZER MODE
#optimizer_index_cost_adj = 10
as you know that this parameter is very important regarding System Performance.
now please guide me . I have to set these parameter or no need while there is not showing any parameters against obsolete command.
waiting you valuable reply.
Regards,

hi both,
thanks for knowledge sharing with me other SDN users,
Dear Orkun,
Ok. At this stage, I can recommend you that apply what they have suggested,
in the message. So, you already did a part of it by configuring
Oracle parameters, already.
SAP support sent me this file (PRD_Parameters)
*** INFORMATION 1 ***
*** INFORMATION 2 ***
*** INFORMATION 3 ***
*** INFORMATION 4 ***
*** INFORMATION 5 ***
*** INFORMATION 6 ***
*** INFORMATION 7 ***
*** INFORMATION 8 ***
*** INFORMATION 9 ***
*** INFORMATION 10 ***
*** INFORMATION 11 ***
_b_tree_bitmap_plans
_fix_control (4728348)
event (10753)
event (38087)
event (10183)
optimizer_index_cost_adj
star_transformation_enabled
event (10027)
event (10028)
event (10411)
event (10629)
event (14532)
_fix_control (5705630)
_fix_control (5765456)
_optimizer_mjc_enabled
_sort_elimination_cost_ratio
event (10091)
event (10142)
event (38068)
event (38085)
event (44951)
parallel_execution_message_size
parallel_threads_per_cpu
query_rewrite_enabled
log_archive_dest_1
log_archive_format
max_dump_file_size
optimizer_features_enable
log_archive_dest
_push_join_union_view
_cursor_features_enabled
_first_spare_parameter
event (10049)
db_writer_processes
parallel_max_servers
db_cache_size
pga_aggregate_target
processes
sessions
dml_locks
job_queue_processes
log_checkpoint_interval
remote_login_passwordfile
sga_max_size
shared_pool_reserved_size
sort_area_retained_size
sort_area_size
statistics_level
workarea_size_policy
they only highlighted these following parameters from above
**** INFORMATION 8 *** DB Patchset: 10.2.0.4.0
**** INFORMATION 9 *** DB Mergefix: 0 (released before 2008-07-11)
FYI... recently, i applied the Oracle Patches 10.2.0.4 in this sequence
MS Windows x86-64 (64-bit)
Patchset_10204_MSWIN-x86-64aa.bin
Patchset_10204_MSWIN-x86-64ab.bin
Patchset_10204_MSWIN-x86-64ac.bin
OPatch
OPatch_10205_Generic_v0.zip
Generic (32-bit / 64-bit)
p8350262_10204_Generic.zip
p7592030_10204_WIN_GENERIC.zip
p9254968_10204_WIN_GENERIC.zip
10204_Patch44_MSWIN-x86-64.zip
p9584028_102040_Generic.zip
p9843740_10204_Generic.zip
and please tell me , still i have to apply highlighted parameters or now no need.
Regards,

Where can I download the ODBC driver for Oracle 10g XE?

where can I download the ODBC driver for Oracle 10g XE?
I need the ODBC drivers for windows 7 x64, I installed Oracle Database 10g Express Edition, the use and connects with RazorSQL well, I just want to make a connection THROUGH ConnectionString language using the ODBC driver

already checked these http://www.connectionstrings.com/oracle, I need Help Please.

SAP Note 830576 - Parameter recommendations for Oracle 10g

As per SAP Note 830576 - Parameter recommendations for Oracle 10g, I have tried to change the value for
parameter "db_file_multiblock_read_count".
In sql prompt it shows:
SQL> show parameter DB_FILE_MULTIBLOCK_READ_COUNT
NAME                                 TYPE        VALUE
db_file_multiblock_read_count        integer     128
and in brtools it shows:
58 - db_file_multiblock_read_count      both     no      *       yes   128
But I got the following error, when i tried to set it null
1 * Parameter description (desc) ..... [db block to be read each IO]
2 * Parameter type (type) ............ [integer]
3 * Current parameter value (parval) . [128]
4 * Value in spfile (spfval) ......... []
5 # New parameter value (value) ...... [null]
6 - Scope for new value (scope) ...... [both]
7 # Database instance (instance) ..... []
8 ~ Comment on update (comment) ...... []
9 - SQL command (command) ............ [alter system reset db_file_multiblock_read_count scope = spfile sid = '*'; alter system reset db_file_multiblock_read_count scope = memory sid = 'MBD']
BR0662I Enter your choice:
c
BR0280I BRSPACE time stamp: 2008-08-14 18.19.22
BR0663I Your choice: 'c'
BR0259I Program execution will be continued...
BR0280I BRSPACE time stamp: 2008-08-14 18.19.23
BR0301E SQL error -32010 at location BrSqlExecute-1, SQL statement:
'/* BRSPACE / alter system reset db_file_multiblock_read_count scope = spfile sid = '''
ORA-32010: cannot find entry to delete in SPFILE
BR1017E Execution of SQL statement 'alter system reset db_file_multiblock_read_count scope = spfile sid = '*'; alter system reset db_file_multiblock_read_count scope = memory sid = 'MBD'' failed
BR0669I Cannot continue due to previous warnings or errors - you can go back to repeat the last action
BR0280I BRSPACE time stamp: 2008-08-14 18.19.23
BR0671I Enter 'b[ack]' to go back, 's[top]' to abort:
Kinldy let me know, what could me wrong.

Hi Markus,
As per your suggestion we have downloaded the files from UCLIB_3-20000978.SAR. But now getting the error as
sapccmsr -DCCMS -j2ee pf=profile value
INFO: use SAPLOCALHOST hostname
INFO: CCMS agent sapccmsr working directory is /usr/sap/ccms/XX1_00/sapccmsr
INFO: CCMS agent sapccmsr config file is /usr/sap/ccms/XX1_00/sapccmsr/csmconf
INFO: Central Monitoring System is [XX1]. (found in config file)
INFO: additional Central Monitoring System is [AS2]. (found in config file)
ERROR: Cannot open Monitoring Segment 0 rtc = 245
Last reported error: [249] CCMS monitoring segment has wrong EYE CATCH. It seems to be created as non-unicode segment.
This program runs as unicode. Please use non-unicode version
Please suggest
Thanks,
Anu

Should I go for Oracle 10g OCA/OCP or 11g OCA/OCP Certification?

Hi all,
I am lil bit confuse to decide about my oracle core dba certification.
Please help me to know, as per the present requirements of the business organizations.
***Should I go for Oracle 10g OCA/OCP or 11g OCA/OCP Certification?***
Hope u guys answer me earliest.
Thanks & Regards,

Most likely, it doesn't matter too much. I doubt that most employers are terribly concerned with what recent version of Oracle you have a certification on.
That said, if it matters
- What does your organization use? What are their plans to upgrade? If your company still uses 9.2 primarily and has plans to upgrade to 10.2 this year, you're probably better off with a 10g certification. If your company is already running mostly 11.2, you're probably better off with an 11g certification.
- What do most employers in your particular part of the world tend to use? What do job postings in your particular part of the world generally list?
Justin

New features for oracle 10g DBA

hi all,
i want to download new features for oracle 10g dba in free, but i cant found it free.so if somebody know anylink which provide it free or if somebody have it.plz let me know.i need it on urgent basis.
Ihsan DBA from Pak

http://www.oracle.com/pls/db102/to_toc?pathname=server.102%2Fb14214%2Ftoc.htm&remark=portal+%28Getting+Started%29
Could you not download from here?

PL/SQL New Features for Oracle 10g

Hi,
If anybody asks what are the new features in PL/SQL for Oracle 10g version, what would be the answer?
Thanks,
Mrinmoy

user3001930 wrote:
Hi,
If anybody asks what are the new features in PL/SQL for Oracle 10g version, what would be the answer?
Thanks,
MrinmoyI would say: Who cares about 10g features nowadays. And they I would tell them about the new 11g features (that I remember).

Golden Gate 32bit for Oracle 10g and 11g

Does oracle released Golden Gate 32bit for Oracle 10g and 11g, i could not able to find out 32bit http://edelivery.oracle.com or OTN.
Thanks

never mind, i was able to download from e-delivery.

Tnsping issues for oracle 10g standby setup

Similar Messages

Maybe you are looking for