To Activate Business Function FI

Dear Experts,
We are implementing BI. We are in need of activating below business functions for Vender, Asset reports etc. in BI
FIN_REP_SIMPL_1
FIN_REP_SIMPL_2
FIN_REP_SIMPL_3
Can you kindly guide us the dependent FI business functions related to above each BF. I have found certain info. regarding the dependent BF. which are not activated so far. Those are mentioned below. (Further We are on EHP 5 & activated New GL).
FIN_GL_CI_1
FIN_GL_CI_2
FIN_GL_CI_3
and if you got any idea about the risk involved, appreciate your advise as well
Best Regards,
Thuwan

Hi Thuwan,
In transaction SFW5 (where you activate Business Functions) there is column "Dependencies".
from what I can see in your case the only dependecy is: FIN_REP_SIMPL_2 must be activated if you want to activate FIN_REP_SIMPL_3.
I don't think there is much risk in activating those business functions. They just give you additional FI reports in BI.
Regards,
Szymon

Similar Messages

ESS activate business function

Hi,
our customer want to use webdynpro abap and activate the ESS business function. Does anyone have experience if this is activated, will this affect their java iViews?
And if so, what are the risks on standard ess scenarios (maintenance on personnel information in masterdata)?
Thank you!
Kind regards,
Hilde Bakkemyr

Yes if you activate ABAP WD switches you ll be using the new WD ABAP
For using new WD ABAP-based ESS you need to install SAP Business Suite 7
Innovations 2010 (EA-HR 605) and activate business function
HCM_ESS_WDA_1. You can find a description of the business function in
SAP Library for SAP ERP for SAP enhancement package 5 on SAP Help Portal
at http://help.sap.com/erp -> Business Functions (SAP Enhancement
Package 5 for SAP ERP 6.0) -> Enterprise Business Functions -> Human
Capital Management -> HCM, ESS on Web Dynpro ABAP.
read the SAP Note No. 1450179
http://help.sap.com/erp2005_ehp_05/helpdata/en/25/340b0507434193adbfe3f8fc8896c7/frameset.htm

How to activate Business Functions in SAP.

Hi ,
I want to activate business fucntion LOG_MM_CI_2 related with MM bapi. I found that, we can activate any business function by using transaction code SFW5 . But i can not find the above business function in this transcation code.
I am using ECC 6.0 support package SAPKA70006.
Note: (Please let me know, the right forum if this is not the right forum to discuss this question).
Regards
PG

Hi,
Your requested functionality is delivered in EHP 2 & 3 . So as suggested you need to install ehp3 or EHP4 on your server.
Regards,
Vamshi.

Activate business functions

Hi,
Our client is using ECC6.0 version, we have accidentally activated SAP IS OIL &GAS, where previously it used to be SAP retail. Due to this if we execute any transaction it is going to dump with an error that DDIC data inconsistce. Can you please advise me how to deactive these business function and change SAP IS OIL & GAS to SAP retails as business function set.
I really appreciate your prompt response.
Thanks,

Hi,
Once you have activated SAP IS OIL &GAS. You cannot deactivate yourself. Billing starts from the date of activating. You need to put up OSS to SAP. Only the solution you have to contact the SAP AG and deactivate it.
Regards,
Srinivas Muthyala

EHP4 Talent Management business function CA_HAP_CI_1

Hi
We have applied EHP4 and have ECC6 Basis 701 SP6 and HR 604 SP24 and Netweaver EP7.
Has anyone experience of acitivating business function CA_HAP_CI_1.
I have researched this functionality and know of SAP notes 1239427 and 1239426.
It would be most useful if someone could advise on what steps they have taken when activating this business function and what other configuration steps have been done.
I know to activate it is done in the IMG under Activate Business Functions.
Many thanks
Julie

Hi,
This can be activated in SWF5 .Ask basis consultants to activate it.
Cheers
Kumar

EA-FIN activation business function SFW5

in SPRO "activate business functions" or via SFW5 I try to activate EA-FIN but all options are in grey?!
any suggestion?
kr
Arjan

Hi all,
The problem is not authorization issue. First of all you have to change system change option ( SE06 ) to modifiable after that you have to change client role ( SCC4) to "customizing" , changes and transports for client-specific objects to "changes without automatic recording" and cross-client object changes to " changes to repository and cross-client customizing allowed" after all you can activate business function in SFW5.
Regards,
Erman Tüfekci

Activation Business Function MGV_LAMA Long material number

Hi all.
Does anybody know how to activate Business Function MGV_LAMA Long material number

Dear
Please try
search OSS, there are hundreds of note
Note 735529 - FAQ: DIMP/DI long material number and MPN
831966 - Restrictions when Implementing the Long Material Number LMN
[http://help.sap.com/erp2005_ehp_05/helpdata/en/20/cad200ccbe4aebafe3a6ace781d111/content.htm]
With Regards
Pushpalas
Edited by: pushpalas on Oct 24, 2011 12:21 PM

Business functions to be activated after EHP4 upgrade

Hi All,
I have recently upgraded ECC 6.0 to EHP4.The following technical usages were selected during download.
Financial Services,Financial Supply Chain Management and Financials.
Please let me know what all business functions that are to be activasted.
Do I have to activate business functions for EHP2 and EHP3 as well.Below are the BFs for our usage types.
Business Function                           Technical Usage                         EHP
/IBS/EAFS_RBD_BUSOPR                           Financial Services                          4
EAFS_BCA_BUSOPR                           Financial Services                          4
EAFS_CML_LOANS_POOLING                Financial Services                          4
FICAX_BILL_INVOICING                           Financials                                                4
FICAX_CI_1                                                Financials                                                2
FICAX_CI_2                                                Financials                                        4
FIN_FSCM_CCD_INTEGRATION               Financial Supply Chain Mgmt     4
FIN_FSCM_INTEGRATION                           Financial Supply Chain Mgmnt     2
FIN_TRM_CORR_FW                           Financial Services          4
FIN_TRM_INS_HM                           Financial Services          4
FIN_TRM_LR_FI_AN                           Financial Services          3
FIN_TRM_LR_FI_AN_2                           Financial Services          4
FIN_TRM_PSM_INTEGRATION      Financial Services          4
INS_FSSR_CI_1                           Financial Services          3
INS_FSSR_CI_2                           Financial Services          4
INS_FSSR_I18N                           Financial Services          4
Out of the above FICAX_BILL_INVOICING,FICAX_CI_2,FIN_FSCM_CCD_INTEGRATION,FIN_TRM_INS_HM and FIN_TRM_LR_FI_AN_2 have dependencies like X_CONT or BI_CONT which are not installed on the system.
I guess I can't activate these business functions.Am I right?
And I read that only one BF set is activated per one system.I did not find any BF set related to Finance in the drop down list of SFW5 in the system.Please enlighten me on this topic.
Regards,
Dinakar
Edited by: mutnuru dinakar on Mar 8, 2011 1:44 PM

> Thanks for your reply,as I mentioned the list of BFs are applicable for the 3 technical usages I had selected during EHP4 upgrade.I need to select out of them.
I understand your question - however, how should anyone else but you know whether you need the functionality behind them? This is a business decision.
I suggest you use the documentation (press on the corresponding "i" in SFW5) to see if the business requires the functionality. If yes, enable it, if not, you don't need to enable it.
Some of those BFs will need a BW/BI to work. You have to decide, whether you need them or not.
Markus

Activating Business Functions:

Dear All,
Is it possible to activate Business Functions other than 000 client using T'code sbw5. If so..., what will be the causes after changes made.

Hi,
Yes, you can activate business function other than client 000. You have to make sure before activating business function because once activated, you cannot revert back changes. Once a particular business function is activated, you will get all functions related to that business function.
Thanks
Sunny

Switching on HCM business functions with EHP4

Hello
We have installed EHP4. When trying to activate business functions for talent management using the img, we get a message "no activation necessary".
Does anyone know why this is so and how it can be fixed
Thanks

Thanks Sergio. Can you tell me where the planned column should be located? Is this the same as planned status?
When I open this configuration task, I have a planned status but no planned column.
I have the following
Business Function Set is blank
Under Enterprise Extensions, business function EA-HR is activated and release is showing 600
Under enterprise business functions, the function I am trying to switch on is HCM_TMC_CI_1 (it shows release 604).
The columns I see are: Name; Description; Planned status; Dependencies; Documentation; Release info; Release; SAP Test Catalog; Test Catalog and Activated On
Is it possible that the basis team did not install ehp4 properly?
When I look at system status in the test system it shows the followign for basis and hr
basis 701
ea-hr 604
thanks

Activating business function OPS_PS_CI_1

Hello,
I want to activate business function OPS_PS_CI_1 using transaction SFW5in ECC 6.0 EHS-3.......if I want to deactivate can this be done if necessary.
Thanks
Moderator message: not directly related to ABAP development.
Edited by: Thomas Zloch on Jan 19, 2011 4:57 PM

Hi Saurabh,
Business function OPS_PS_CI_1 is available as of ERP 6.0 EHP3.
In case you have only ERP 6.0 without any enhancement packs, you may need to upgrade the ECC system to atleast EHP3.
Post this upgrade you may use SWF5 to activate the required business function.
Refer SAP help for more details
Project System - Business Functions (SAP Enhancement Package 4 for SAP ERP 6.0) - SAP Library
Hope this helps.
Regards,
Deepak Kori

How to activate the business function HCM and HCM_LSO_CI_2

Hi!
To use the role of course administrator 1.4, we have to activate the business function HCM, Learning Solution 02 (HCM_LSO_CI_2).
On IMG, I do not see about HCM_LSO_CI_2. Could you tell me the right way to do that?
Please help.
Thanks!

Hi Linda
You should be able to active business functions through SFW5 T code or by executing the very first (top) node in SPRO.
Hope this helps
Best Regards
Reddy

Business Functions Switch to activate Enhancement Package 4

Hi SAP experts,
can you help me?...
We will implement SAP CRM 7.0 with scenario of creation ERP Quations & ERP Sales Orders, therefore we have installed Enhancement Package 4 in our ERP, but I've been looking for information to know which Business Functions (switch) we need to activate for this scenario, but in all documentation I've been looking doesn't indicate this.
Can you let me know wich switches we need to activate or share documentation about this?
Your help is most highly appretiated.
Regards
Gonzalo C.

> We will implement SAP CRM 7.0 with scenario of creation ERP Quations & ERP Sales Orders, therefore we have installed Enhancement Package 4 in our ERP,
So there was any business reason to install EHP4? Who told you? And those people should also be able to tell you what to activate
I'd go through SFW5 and click the "documentation" button next to the functions, this will open a browser window explaining what this function is about.
Markus

Business Function Set: Enterprise AddOns in Solution Manager

Hello
For testing purposes I want to activate the Enterprise AddOn EA_PLM in transaction SFW5 inside a Solution Manager 4 installation but no Enterprise AddOn is available. Additionally there is only one Business Function Set called "telco reference pack" with two Business Functions. Do I have to set up something before I can active the Enterprise AddOns? I thought PLM is part of the Solution Manager 4 installation.

Hello Marc,
the Solution Manager consists "only" of an CRM-component, the SolMan component itself and the Netweaver 2004s platform. So no PLM (and no Enterprise AddOn) is available. SolMan coves some functionalities of Software Lifecycle Management, but does not include the PLM coding itself. For EA_PLM you need an ERP system.
Best regards, Alexander

Help on Business Function "Reporting Financials 2" and its impact

Hi All,
I am looking at 'SAP Help' for Reporting Financials 2 (EhP4).
http://help.sap.com/erp2005_ehp_04/helpdata/EN/6a/cd7dbd74694af3ac13b3c24a10def4/frameset.htm
basically I want to use the standard extractor 0FI_AA_20 FI-AA: Transactions and Depreciation . when i try to run the extractor i get an error saying: Business Function "Reporting Financials 2" is not switched on
In order to use the new data sources the pre requisites are:
1. SAP Enhancement Package 4 for SAP ERP 6.0
2. Activated the Reporting Financials 2 business function.
The EnP4 is already implemented what i have do next is to activate the business function.
Can any one help me with more details on what all gets activated with this business function 'Reporting Financials 2' and its impact.
With Best Regards
Shilpa.

Hi,
in SFW5 you can get an overview over the business functions. There you could activate the appropriate Business Function.
But I would recommend you strongly before to read some information and documentation about business functions and the enhancement package concept.
Regards,
Markus

To Activate Business Function FI

Similar Messages

Maybe you are looking for