To activate in Colombia?

if I buy new iphone in U.S., I can activate it in Colombia?

pwdsk,
When you purchase an iPhone in the U.S. an account is activated with AT&T at the time of purchase.
Columbia is not on the list of countries confirmed so far on http://www.apple.com/iphone/countries/
However this article does list carriers that may offer authorized unlocking options.
http://support.apple.com/kb/HT1937
Hope this helps,
Nathan C.

Similar Messages

Sorry but I think this wrong, I know that in Colombia there and two of the three operators already have 4G/LTE networks, what happens is that the iPhone should be expected to send the update software for computers that have this tercnologia activate them,

sorry but I think this wrong, I know that in Colombia there and two of the three operators already have 4G/LTE networks, what happens is that the iPhone should be expected to send the update software for computers that have this tercnologia activate them, that my Iphone or receiving 5 supports 4G LTE,
Thank you for your attention

Apple needs to test the carrier if they offer LTE as expected.
If your country/carrier is not on the list then there's no LTE on your iPhone.
http://www.apple.com/iphone/LTE/
It's between the your carrier and Apple. There's nothing you can do except feedback to Apple:
http://www.apple.com/feedback/iphone.html

Could Not Activate iPhone 3GS in Colombia

Hello.
I bought my iPhone 3GS in a Store in Bogotá Colombia, wich where imported and Activated on EEUU.
When iTunes offer to me to install the last Version of iOS 5.0.1, my iPhone could not be activated because the activation server is temporarly unavailable.
Then I connect my iPhone to iTunes Version 10.5.0.142 to activate it, and try... and try... and try so many times durning 3 days!, and nothing happens.
I Try install the firmware using the redsn0w, with versions 5.0.1, and nothing, after with versions 4.2.3, and the iOS was incompatible, making the iPhone not start and stay blocked in the iOS icon of the Apple.
Finally the most far that I came was this error messaje:
"There's no SIM Installed on My iPhone that I trying to activate. But It's false. I have installed an Tigo SIM Card, activated with 400 minutes of conversation, 3G and 1 GB of internet communication working".
I try Register the cellphone putting that I'm EEUU, with no GPS, and Nothing
I try Register the cellphone putting that I'm Colombia, with no GPS, and Nothing
I test my SIM card with other cellphones and works perfectly.
HELP PLEASE!!!
If I can't solve this problem, I'm affraid that I'm going to sell this cellphone and buy an Android.

see i am having the same problem too. so who solved the problem i am looking for help for my phone i keep getting this messages it could not activate the iphone
who knew how to fix the problem i been having this for 2 week
i tried to go to the apple store there couldn't help me
i dont know what to do
can same body help me

HT201328 I want to activate mu unlocked iPhone 3gs with Comcel in Colombia. Do I need a Comcel SIM when I do the restore

I receive an AT&T unlock for my iPhone 3GS. I did the restore on iTunes and was greeted with the message "congratulations! your iPhone has been unlocked." I want to ues the iPhone in Colombia with Comcel. When I did the restore there was an AT&T sim in the phone. When I put the Comcel sim in the phone will it activate on the Comcel network? Or . . will I have to resre it again with the Comcel SIM in the phone?

Are you saying if I did the restore using an AT&T sim, which is what I have done, and the unlock was succesful, all I need to do is remove the AT&T sim and put in the Claro sim and the phone will activate for that Carrier?
Or will I have to do another restore using the Claro sim?
Thanks,
Monty

Activation errors Baseline harmonized Colombia

Hi guys,
Im installed Baseline package for COLOMBIA with this components BP-INSTASS 600v6 and
BP-ERP05 603V5, i have the system in EHP3 like said in the BL_Quick_GUIDE. I Upload the scope file 51036430_SCOPE_BL_CO_V1603_603V5.xml and try to activate the scenarios but found this error:
ECATT(/SMB99/TFACD_O17C_J0A) in BB(100 (CO)) of scenario(CO_166) not exist in system.
can anybody help me please?
thanks in advance
Alberto Gil

Hi Alberto,
Were you able to get the answer for this. I'm encountering the same problem when trying to load the UK Baseline.
I tried to look up the test data external file which holds the following fields :
[VARIANT]                          [DESCRIPTION]     I_ACTION     I_IDENT     I_SPRA_1     I_SPRA_2
                                      Action (A=Act., C=Comp., ' '=both)     Factory Calendar     Activation Language 1     Activation Language 2
*ECATTDEFAULT                           DXX;I_ACTION     D00;I_FABKL     DXX;I_SPRA_1     DXX;I_SPRA_2
VAR_001                            Factory Calender     I_ACTION(DXX,VARIANT_1)     I_FABKL(D00,HOME)     I_SPRA_1(DXX,VARIANT_1)     I_SPRA_2(DXX,VARIANT_1)
....and I'm trying to recreate the missing Ecatt components.
The Transaction which is being recorded is SCAL - which is maintain factory calendar. I can trace the I_ACTION action to choosing the calendar type and I_DENT to factory ID but cant really match the I_SPRA_1     I_SPRA_2 fields. I tried looking up the table TFACD (the factory calendar table) but couldn't match the fields. From the description it looks like these two SPRA_1 and _2 are language keys set to the Calendar ID but the SCAL transaction doesn't support that. But it could be a possibility these are automatic values which are populated by the system where there are no user interaction, I strongly doubt this maybe the case as with most language key options within SAP.
Now I'm trying to figure out if this configuration is done through any other transaction to rule out other possibilities to some extent.
Creating Ecatt is not that difficult and using the /SMBA0/TFACD_I17C_J0A (test script) and /SMBA0/TFACD_O17C_J0A (test configuration) which is similar to this it can be reproduced but first need to figure out the transaction recorded.
My current thought process is that to replicate this Ecatt using the above mentioned Ecatt and just make a copy and see how things run. But this will be my last resort and before that a little more analysis need to be done to see the similarities between them (i'm doing a test recording of SCAl and comparing it against this Ecatt)
Hope my notes are helpful and if you made any progress please update me.
Thanx and goodluck.
AZ

Forget the iCloud account which activate my iphone

No puedo activar un iphone. Me dice que debo de activarlo con la cuenta a*****@gmail.com y le ingreso la cuenta que empieza por "a" y la contraseña y dice que esa cuenta no puede activar el iphone. He intentado todos los correos y contraseñas que manejo y me es imposible. Tengo la factura de compra del telefono directamente con el operador Claro en Colombia. Como puedo activar mi iphone?

In english "I can not activate an iphone. He tells me I must activate the account ***** @ gmail.com and income will account beginning with "a" and the password and says that this account can not activate iphone. I tried all the emails and passwords I use and it's impossible. I have proof of purchase of the phone directly with the operator Claro in Colombia. As I can activate my iphone?"

Saludos; compre un iPhon 4S en Venezuela, actualmente me vine a vivir en Colombia y quiero activar mi iPhone acá, pero no le funcionan los chips que le he comprado comprado acá, necesito saber que hacer para poder contratar un plan acá en Colombia.

Greetings, buy a iPhon 4S in Venezuela, today I came to live in Colombia and I want to activate my iPhone here, but do not work for chips purchased I bought him here, I need to know to make a plan to hire here in Colombia. What should I do?

My iphone 5s do not activate iphone house

I have a iphone 5s, restore it to factory settings and now my iphone will not activate it. took 9 days with this problem and I can fix anything.

OK WELL I'LL EXPLAIN MY PROBLEM. LOOK WHAT HAPPENS IS THAT I HAVE A IPHONE 5S DAY LAST THURSDAY WAS LEFT TO ME NO SIGNAL PROBLEM AND WAS NOT OPERATOR, THEN A friend recommended RESTORE TO FACTORY SETTINGS AND PROCEDURE TO PERFORM THE ITUNES. RESTART WHEN MY IPHONE 5S ME, ME A MESSAGE THAT SAID CAME "HELLO" THEN I APPLY FOR LANGUAGE "LE PLACE SPANISH IN MY CASE" THEN I REQUEST THE PLACE WHERE AM I AND MY PLACE IF YOU "COLOMBIA" LATER CALLS ME ME CONNECT TO A NETWORK WIFI TO ACTIVATE AND ME SALE "MAY THE ACTIVATION OF IPHONE LAST FEW MINUTES" AND AS I DO ACTIVE THEN ME OUT ANOTHER MESSAGE SAYING "UNABLE TO ACTIVATE IPHONE" HAS NOT BEEN ABLE TO ACTIVATE THE IPHONE BECAUSE SERVER ACTIVATION IS NOT AVAILABLE TEMPORARILY, TRY AGAIN IN A FEW MINUTES OR PROOF CONNECT IPHONE TO iTUNES TO ACTIVATE. IF PROBLEM PERSIST, PLEASE CONTACT THE CUSTOMER SERVICE APPLE. WEAR AND 9 DAYS WITH THAT PROBLEM AND SOLVE NOTHING TO ME, ALL DAY TRATANTO RETRY AND CONNECTS TO SEE IF ANYTHING. YESTERDAY THERE WAS DISABLED remembered APPLICATION "FIND MY IPHONE" AND ENTER TO DISABLE ICLOUD AND LO. BUT TODAY I WALK AGAIN IN WIFI AND NOTHING TO ME THE ACTIVE.

Inlfation accounting for asset in colombia

Hi Gurus,
we had completed the asset configuration for our company in colombia. Later on we come to know inflation accounting is applicable for asset in colombia.
we had never activate inflation accounting for asset in sap for our other company. we will appreciate if we will get steps of
configuration for activate inflation accounting for asset.
Regards,
Rajesh Khanolkar

Hi Rajesh,
For Turkey I used SAP note 725957. You can use this one or have a look on SAP note's if there is a specific one for Columbia

How to find licence number to activate software ?

I have just bought the Adobe creative Cloud for enterprise.
I had download the creative cloud and now each software is asking for a licence number but I can't find it.
And I have no acces to Adobe Licensing website to get one.
Can you help me?
Thanks.

Hi Berengere,
Welcome on the Adobe Forums!
There is no serial number needed to activate the Creative Cloud, the Adobe ID will be used to activate the product.
As the product mentioned is Cloud for Enterprise, you have to verify first if your Adobe ID (email address) has been assigned to the user rights.
You will find more information in the following link: http://helpx.adobe.com/creative-cloud/help/manage-creative-cloud-teams-membership.html
If you have already proceeded the the previous steps, please try the steps below then:
1. Clean Up cached user login information
Close the Creative Cloud application.
Navigate to the OOBE folder.
Windows: [System drive]:\Users\[user name]\AppData\Local\Adobe\OOBE
Mac OS: /Users/[user name]/Library/Application Support/Adobe/OOBE
Delete the opm.db file.
Launch Creative Cloud.
2. Reset the Hosts file
Windows
Choose Start > Run, type %systemroot% \system32\drivers\etc, and then press Enter.
Right-click the hosts file and select Open. Select Notepad for the application to open the hosts file.
Back up the hosts file: Choose File > Save As, save the file as hosts.backup, and then click OK.
Search the hosts file for entries that reference Adobe (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
Save and close the file.
Mac OS
Log in as an administrator to edit the hosts file in Mac OS.
In a Finder window, choose Go > Go To Folder.Type /etc.
Select the hosts file and open it.
Back up the hosts file: Choose File > Save As, save the file as hosts.backup, and then click OK.
Search the hosts file for entries that reference Adobe (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
Save and close the file.
Please, let us know how it goes.
Thank you.
Arnaud.

How to Activate the Table which Doesn't Exist - Can I create Table in SE11

Hi Gurus,
I am a BASIS Person ..so, I don't have much idea about ABAP Developement side . But, while applying patches to one of the SAP Component, I get the following error message ( usr\sap\trans\log ) :
Phase Import_Proper
>>>
SAPAIBIIP7.BID
1 ED0301 *************************************************************************
1 EDO578XFollowing objects not activated/deleted or activated/deleted w. warning:
1EEDO519X"Table" "WRMA_S_RESULT_DATA" could not be activated
1EEDO519 "Table Type" "WRMA_TT_UPDTAB_DSO" could not be activated
1 ED0313 (E- Row type WRMA_S_RESULT_DATA is not active or does not exist )
2WEDO517 "Domain" "WRMA_KAPPL" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCPER" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCVARNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RCLASV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_AMNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_INV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_OBJ" was activated (error in the dependencies)
2WEDO549 "Table" "V_WRMA_TRCLASVER" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLASVPE" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLPERCL" was activated (warning for the dependent tables)
2WEDO549 "Table" "WRMA_S_STOCK_SELECTION_DATE" was activated (warning for the dependent tables)
<<<
Now, I checked Domain WRMA_KAPPL in SE11 and it diplays that it is partially active :
" The obeject is marked partially active for the following reasons :
   Errors occured when adjusting dependent Objects to a change. Some of the dependent objects could not
   be adjusted to this change. To adjust the dependent objects, you must perform the following actions
   the next time you activate this object.
                    - SET THE SYNP TIME STAMP IN THE RUNTIME OBJECT OFALL DEPENDENT OBJECTS
My question is - how to activate this SYNP Time Stamp.. ?
                      - Once I activate this SYNP Time Stamp.. How do I activate this ..in SE11 or some other
                        TCode..
Any / ALL Help is highy appreciated and would be rewarded with appropriate Reward Points.
Thanks,
Regards,
- Ishan
>> Ok, Now I forcefully activated the Domain and then all the 5 Data Elements in SE11 ...now I have error
     that table WRMA_S_RESULT_DATA and WRMA_TT_UPDTAB_DSO Could not be activated...
     ..And in SE11 > Input the first / Second Table > Excute > Output : Table Does not Exist !!!
      - Now, How do I activate something which does not exist in the first place ?
    Any Input about this ?
Thanks,
Regards,
- Ishan
Edited by: ISHAN P on Jun 19, 2008 3:44 PM

Read note 1152612 - Incorrect component type in structure WRMA_S_RESULT_DATA.
The error occurs in Release BI_CONT 703 Support Package 9.
If you require an advance correction for Support Package 9, make the following manual changes if the InfoObject 0TCTLSTCHG is inactive in your system.
1. Use transaction RSA1 to call the Data Warehousing Workbench.
2. Check whether the InfoObject 0TCTLSTCHG was already activated by the compilation process the first time you called transaction RSA1. You can use transaction RSD1 to check this by entering 0TCTLSTCHG in the "InfoObject" field and choosing "Display". Proceed as follows if the InfoObject is still not active:
3. Go to BI Content activation.
4. Select "Object Types".
5. Open the "InfoObjects" tree and select "Objects".
6. Search for the InfoObject 0TCTLSTCHG and select it.
7. Transfer the object and activate it.
These steps activate the required component type /BI0/OITCTLSTCHG. You can check again in transaction RSD1 to ensure that the InfoObject 0TCTLSTCHG is available as active.
Jacek Fornalczyk

HT201328 Hi there, I purchased an Iphone 4S, it is currently locked with one carrier, I am in a contract with another carrier. I am trying to unlock the phone, but the Carrier says I have to activate it through them to unlock it. I so not want to do that,

Hi there, my daughter purchased a used iPhone 4S from a local newspaper who has had it in the lost and found for nearly a year, and no one ever claimed it. It is locked with Telus, my daughter is a Virgin Mobile customer. Telus told me they will only unlock it if she activates it with them, she cannot do that as she is in a contract with Virgin. Is there anything I can do to get around this problem?

Only the carrier to which the iPhone is locked can unlock it. In
this case, you must work with Telus. If they have a pay as you go
plan, activate the iPhone on Telus that way and then after
you meet whatever requirements Telus has, stop using Telus
and move the iPhone to Virgin. Or sell the iPhone to someone
who can use it on Telus.
Telus is the only one who can unlock that iPhone.

I am trying to activate root account on my MAC. The directions I've seen do not match what is in System Preference for Accounts or Users

I am trying to activate the root account on my new Mac Book Pro. The instructions that I have found do not match what I have in System Preferences. What is the process when using Users and Groups. When I click on Join the Network Account Server- Open Directory Utility I don't see a option to activate root user as the instructions say at http://support.apple.com/kb/HT1528
OS X Lion
From the Apple menu choose System Preferences....
From the View menu choose Users & Groups.
Click the lock and authenticate as an administrator account.
Click Login Options....
Click the "Edit..." or "Join..." button at the bottom right.
Click the "Open Directory Utility..." button.
Click the lock in the Directory Utility window.
Enter an administrator account name and password, then click OK.
Choose Enable Root User from the Edit menu.
Enter the root password you wish to use in both the Password and Verify fields, then click OK.

Do you mean you cannot select "Enable Root User" from the "Edit" menu as shown below?
Why do you think you need to enable the root user? I've never needed it in the history of OS X.

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost".

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost". I could swear the last time I used cellular data you would see the signal in the upper left corner and I only see "no service" there, I am in a location where I know I should have service. Is there something I should do to my IPAD? I tried resetting, I tried clearing cookies and history in Safari (after reading a post n these discussions). I don't know what to do next. My IOS version is 6.1.3. I did go into Network from the general tab and I see it says "SIM not provisioned". HELP and Thank you in advance.

Hello Theresa818,
Thank you for using Apple Support Communities!
It sounds like the cellular data will not activate for some reason on the iPad.
I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
Check for a carrier settings update.
Update your iPad.
Toggle the Cellular Data setting off and on under Settings > Cellular Data.
Restart your iPad.
Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPad as new.
If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
I know you may have done one or two of the steps here, so you can skip those.
Take care,
Sterling

Error while assigning Payload to container variable, Activate SXI_Cache

Hi experts,
I have a BPM-Szenario. There is a ContainerOperation where I want to fill a Container Variable with a Payload variable. Unfourtunately I get an error in TA sxi_cache: "The value of expression "&.....&" cannot serve as the source of an Assignment.
My question is, is it really unpossible to do this?
By the way: After them my bpm in sxi_cache is blocked. Also if i delete the container operation it is a lot of luck to activate my bpm.
My actions to activate the BPM are:
IR - F7 = all is ok
ID - Delete IP and Create the IP new
SLD-Cache - Activate in IR and ID
SXI_Cache - Delta and Full Cache Refresh
TA SWWL - There are no error work items
All actions do have no influence to the sxi_cache.
Are there any ideas from the experts?
Best
Mathias

Hello Mathias,
How do you assign the container varaible? Are you sure, that your XPath-expression is correct? Is your target container a simple typed container?
Best regards
Joachim

To activate in Colombia?

Similar Messages

Maybe you are looking for