To add an additional field of text of 50 chrs in bseg & bsis

In trxn FB01 or F-02, we have a line item text of 50 chrs (sgtxt). We want to have one more field of text, of 50 chrs. Can i append structure in BSEG & BSIS & mount on the screen ??
Or is there any other way ??
thanks
amit

Hi,
I have similar error . I am gettting short dump .And it says
"Screen "SAPLKACB" 9999 could not be generated.
When I go look at that screen in ecc6 and try to do a syntax check, I get an error stating that field cobl-yystpi_ind is not in the data dictionary.  The code is looking for this field but it is not there."
I checked COBL. cobl-yystpi_ind is there and it is active.
In oxk3 i can see the field cobl-yystpi_ind.
in oxk1 the subscreen 9999 is not there.
Is the dump b'coz of not adding subcreen thru oxk1.
Is that mandatory to maintain the subscreen in oxk1 which is using those fields which are added thru oxk3?
Its urgent and any help is appreciated and points will be rewarded.
Regards,
Pria.

Similar Messages

  • Add a additional field in tcode XK02 - control screen

    Hi,
    I have to add an additional field in Tcode XK02 ie., in Control Screen, I couldn't find any screen exits. I hvae found one BADI VENDOR_ADD_DATA_CS .I have added a New field in Table LFA1 (the new field is T5UNT-NAICS ) through Append Structure but the append strcture is Partial Active. Also, how to add an additional field in the control screen of tcode XK02 using this BADI.
    1. How to make theAppend structure Active
    2. How to add a screen field using this BADI
    Regards,
    Deeephi.

    1. My table was partial active...so go to se11,Enter LFA1 in display mode, Go to Path Utilities-database utility.now click on Activate and Adjust database.it will activated fully.
    2.
    a) create a module programme with the the screenfield(LFA1-NAICS) that you want.
    b) In pbo of module pool,enter following code
    data : l_zfield type lfa1-NAICS.
    constants: c_zfield(10)  value '(SAPMF02D)LFA1-NAICS'.
    field-symbols: <fse>.
    assign (c_zfield) to <fse>.
      if sy-subrc = 0.
        l_zfield = <fse>.
      endif.
    If sy-tcode = 'XK02'.
         Loop at screen.
              If screen-group1 = 'Z1'.
                   Screen-input = 0.
                   Modify screen.
              Endif.
         Endloop.
    Endif.
    c)create a Screen group(Z1) as sushipal reddy showed int he atatched link.
    d)go to Method IF_EX_VENDOR_ADD_DATA~CHECK_ADD_ON_ACTIVE  and add following code
    if i_screen_group  = 'Z1'.
    e_add_on_active = 'X'.
    endif.           
    e)Go to method IF_EX_VENDOR_ADD_DATA_CS~GET_TAXI_SCREEN and type following code
      IF sy-tcode EQ 'XK02'.
        e_screen = '0101'.
        e_program = 'Z_ADD_FIELD_XK02'.
       e_headerscreen_layout = 'E'.
      ENDIF.
    f)thast it...go to xk02 u willl see an al push button and click on it..u can view the screen field...

  • How to use OMJX transaction? Need to add an additional field on MIGO item

    hi guys
    we need to add a new field on the MIGO screen at the item level. We are trying to explore OMJX to add custom fields.
    We have used append structutre to enhance the GOITEM structure but are not clear on how to use OMJX.
    ANy idea how to use the transaction OMJX.
    Thanks in advance

    With the Business Add-In (BAdI) MB_MIGO_BADI, you can extend the              
    interface of the goods movements transaction (MIGO) with additional           
    tabstrip controls for the detailed information (detail tabstrips) and         
    header information (header tabstrips). It is possible for an external         
    application                                                                   
    o  to display an additional detail tabstrip with own subscreen (max. 10       
       lines) in MIGO                                                             
    o  to display an additional header tabstrip with own subscreen (max. 3        
       lines) in MIGO                                                                               
    The program name, screen number and tab page text can be determined           
    dynamically. Different screens can therefore be controlled according to       
    the mode (for example, change mode, display mode, goods receipt, goods        
    issue).                                                                               
    Pushbuttons                                                                   
    It is not possible to implement pushbuttons in the MIGO menu, but you         
    can, however, implement pushbuttons directly on the external subscreen.       
    The OK code from MIGO is forwarded to the external application so it can      
    react.                                                                               
    Cursor Control                                                                
    So that the cursor stays on the same subscreen after you press Continue,      
    if it was positioned there before, the external application in the own        
    PAI must hold the cursor positioning (on the same screen 'yes'/'no'; if       
    'yes', on which field), to set the cursor in PBO again.                                                                               
    Requirements                                                                               
    If you use the BAdI MB_MIGO_BADI in MIGO to update customer-own data, in      
    addition to the material document, to the database, you should note the       
    following:                                                                    
    o  The BAdI MB_MIGO_BADI is only active in transaction MIGO.                  
    o  If you post goods movements with other transactions (for example, with     
       MB01, MB1C, VL02N), you must ensure that customer data is also             
       updated, if necessary.                                                     
       You can do this by using the BAdI MB_DOCUMENT_BADI (Creating a             
       material document) to post the goods movements with the transactions       
       mentioned above.                                                           
    o  Note that otherwise, posting the goods movements will lead to              
       inconsistencies between SAP system data (for example, in stocks,           
       material documents, FI documents) and customer data.

  • Add an additional field to a generated rapid application

    Hello,
    i have created an application with the rapid application process. Thereby i used an existing database table.
    But now i need to add two more fields to this database table...is it possible?
    greets
    KungPow

    Just add a new slide as normal;    command shift N   or  Slide > New Slide
    Your narration will most certainly need to be recorded again as it will not match the new timings.

  • Modify F4-search in CSPB - BOM browser - additional field material text

    Dear Experts,
    we want to modify the F4-search in CSPB - BOM browser. The displayed control on the right side of the screen shows an ALV (?) based on the table PRST. In order to make it easier to find the correct item  the material short text should displayed in the table.
    Unfortunately I did not found any Customizing / Userexits / func / source to append this field - or otherwise instead of appending a field -to substitute the table PRST with the view MGV_PRST.
    Does anyone have a suggestion?
    Thanks and regards
    Michael
    Edited by: Michael Stock on May 31, 2011 8:52 AM

    Hi Sankar maria,
    it's quite simple, all you need to do is to put the form bdc_population in the loop at it_data.
    loop at it_data,
    form bdc_population.
    endform.
    endloop.
    check also if your table is it_bdctab that you have declared or it_data that you have'nt declared anywhere !
    please reward points if helpfull.
    A+
    Ihsen.

  • How to add an additional fields in VAR Service Desk?

    Dear ALL,
    I work in VAR company and we use SAP VAR Service Desk. Our Customer has his own HP Service Desk system. When they creates ticket in SAP VAR Service Desk they are allways creates internal Service Desk number in their HP Service Desk. Now they ask us to create the new field named as "Customer SD number". I searched for the invisible fields but nothing found. And I think it should be like:
    1) Field named as "Customer SD number" and the input field for the Customers HP Service Desk Number
    2) Field on the main scrren of Service Desk where is all tickets.
    But this only my assumption, I didn't made like this work before.
    May be there is standard schema? I read the integration, but I can not do this because we have other customers with their own Service Desk systems.
    Please help.

    Dear Ahsan Rizvi
    you have take ABPER help
    Documentation of the FM BAPI_PO_CHANGE says:
    Function module BAPI_PO_CHANGE enables you to change purchase orders. The Change method uses the technology behind the online transaction ME22N.
    As we can insert a new item in the ME22N, it will allow us to insert a new PO Line using this FM.
    Regards,
    shankar

  • How to add new additional field in my selection screen?

    Hi,
    In the BEx ,I have key and name in my report.While seeing the report, heading for  customer number is coming and heading not coming for customer description.I need to have it in my report.
    I.e
    Customer     !     (This heading is missing)
       7     GABRIEL CHEMIE GMBH - AUSTRIA
       9     BERGER PAINTS BANGLADESH LTD.
    Any tips?  Points will be given.
    Regards,Jaheer

    Hi Jaheer ,
                     If you talking Abuot heading in out put screen then use TOP-OF-PAGE
    or Else you use "Write:/ " Statement in you program...So that when first line is complete it will go to next line...
    What I understand from your Question....
    Souman

  • Add additional field in Vendor master data for VAT Reg. No.?

    Add additional field in Vendor master data for VAT Reg. No.?
    Hi I need to add one additional field for other VAT Reg. number in vendor master data FK01, We currently have two field
    Current Settings:
    Country : LFAS-LAND1
    VAT registration no.: LFAS-STCEG
    I need to add one additional field for text information. Is this possible?
    Thanks you very much
    Luis G.

    If you want to add new fields that are not possible from config (check with your consultant) you need to implement BADIs
    In SPRO, go to:
    >Logistics-General
    ->Business Partner
    -->Vendors
    --->Control
    >Adoption of Cusomter's Own Master Data Fields
    and read the documentation provided there.
    You will need to implement following BAPIs
    Processing Master Data Enhancements: VENDOR_ADD_DATA
    Customer Subscreens: VENDOR_ADD_DATA_CS
    I am not aware of any other way to add new fields to Vendor master (however, check with your consultant for config related screen modifications)
    Should you need any further info to implement it, post back (read it thoroughly first, it's quite self-explanatory).
    regards,
    Aabhas

  • Can't add database field or text object to a report (new and existing)

    We have Crystal Report 8.5 and when trying to modify an existing report or create a new report, I can't seem to add any database fields or text objects in my report.  I get a prohibition symbol (circle with a backslash inside it) when I hover over the report.  Has anyone encoutered something like this? Any suggestions?  Thank you.

    Do you have two monitors?
    I had this problem if I tried to open crystal in the second monitor, move it back to primary monitor and it should be OK.
    Ian

  • How to add Additional fields in standard SAP Report RMCLOBJVN ,TCODE CL6BN

    i am facing problem in Report RMclobjvn , TCODE is CL6BN
    i have to add some additional fields on the result screen.
    but when i search inside the report i could not retrieve any user exits but through a search utility i got 4 user exits of which 2 seem to be useful.these are
    <b>Exit name
    CLCLRS01  Additional Fields on the Result Screen
    CLCLRS02  Fill the Additional Fields on the Result Screen</b>
    i activated the these exits and have tried putting in break point in side the include.
    But the problem is this that
    [<b>b]that CL6BN Tcode is not triggering anyhow these userexits.</b></b>
    does anyone has any solution for adding the additional fields.

    Hai Manish
    Check the following Links
    You can do it in two ways using append structure or include structure of that standard table.
    once you added , you need to adjust it and activate using the menu utilities->data base utulity-> Activate and Adjust .
    check this SAP help..
    for append structure
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb61446011d189700000e8322d00/frameset.htm
    for include structure.
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb54446011d189700000e8322d00/content.htm
    Regards
    Sreeni

  • Add color to an Additional Field inside a SAP Query (Infoset) in ALV

    I made an Infoset (transaction SQ02) out of table MARC. I created an Additional Field called "STATUS" which I coded to get a value of 1 or 2 depending on the value of another field in MARC.
    How can I make this cell in the resulting Query to appear in different colors depending on the value? I found the command "FORMAT" but that doesn't work on SAP List Viewer (ALV) mode.
    This is what I coded in the additional field called STATUS::
    clear: STATUS.
    if MARC-DISPO = 001.
      format intensified color = 6.
      move '1' to STATUS.
    else.
      format intensified color = 7.
      move '2' to STATUS.
    endif.
    The coloring didn't work. What ABAP command should I add to this additional field to make the coloring of the STATUS cell work under ALV mode?

    field catalog and layout are saved into database aqrdb
    just before displaying the results into ALV table, they are retrieved by function RSAQRT_ALV_DISPLAY which does
    concatenate rtmode-act_report sy-langu into l_srtfd_pattern.
      import fieldcat = fieldcatalog
             layout   = layout
             sort     = sort
             from database aqrdb(lv) id l_srtfd_pattern.
    so in order to display some cells with a different color, you have to
    - add an additional field that will contain the color codes of cells
    - set values in this field at record level (field is a table of type LVC_T_SCOL)
    but also adapt the layout in order to set the field as containing the colors
    - put the name of this field into layout (CTAB_FNAME)
    - export layout to corresponding entry of aqrdb
    this part I don't see exactly where to put it, I guess there is some place where it is possible to manage the layout - if not then you have to do it "manually" i.e. with a small report

  • Add additional field on query

    Dear ,
    I have created a quick viewer.
    I need to add an additional field on a SAP query.
    This new field must be calculated as a multiplication of two fields displayed in the query.
    How can I do that ?
    Thanks

    Hello,
    In Quick Viewer, you cannot define local fields. You may convert (In SQ01->Query->Convert Quickview) SQVI Query into an SQ01 Query and then define local field.
    Thanks,
    Venu

  • Infoset (coding in additional field added )

    Hi
    I need some help regarding coding for the additional fields added to the infoset.
    As a data source I have selected a direct read from table MARA. I need to display the description in all languages for the material chosen on the selection screen when the Query is executed in sq01.
    I could have used a join between MARA and MAKT, but instead I have chosen to add an additional field
    with the head 'material description' and coded the select for the material description as per matnr in the coding section.
    The basic list display, only dislays one description, the last one and not all the possible descriptions in all languages.
    What should be the probable code and where should i place that code for such an implementation.
    Please suggest.
    Smriti

    You can do loading of master data text for achieving the material descriptions.
    Regards

  • Add new selection field in an infoset

    Hi everyone,
    I have a problem changing an infoset when I add an additional field. This field is added to its respective field group.
    The problem is that after generate the infoset, I go to the transaction where the querys are made and the new field created has got only a checkbox in the column 'Output', while the column 'Selection' has no checkbox.
    This only happens with this field, while the rest of the fields have two checkbox in column 'Output' and in column 'Selection'.
    ¿What can I do to make appear checkbox 'Selection' in order to make querys?
    Thanks in advance,
    Mayte

    Check this thread.... This might help you.....
    How to add selection texts in infoset?
    Regards,
    Pavan

  • Additional Field in standard maintenance view

    Hi Experts,
    I would like to add an additional field plant in maintenance view V_TKZU3_CO (SPRO PATH: Controlling --> Product cost controlling -->Product cost planning --> Basic settings for material costing -->Overhead -->Define costing sheets ).
    What I'm planning to do is to modify the standard maintenance view V_TKZU3_CO and regenerate the table maintenance generator so that the new field will be added and populate a ztable a copy of table TKZU3 + plant...
    However what I'm afraid of is when I regenerated the table maintenance generator using the standard function group OCOE, it might impact some other standard object included..
    Do you have any idea on how can I add the additional field without modifying the standard? Or if I will apply the standard modification I'm planning.. what are the possible impacts?
    Thanks in advance!

    Hi
    U can create a new table view like V_TKZU3_CO, insert your new fields and create the maintenance view program for it.
    Max

Maybe you are looking for