To add methods in a xml file.

My requirements are like...
a. How to write a method for updating of change id of a record in a xml file.
b. After updation has done then check wheather it has done or not.

javasol wrote:
My requirements are like...
a. How to write a method for updating of change id of a record in a xml file.
b. After updation has done then check wheather it has done or not.and they are very worthy requirements.
But you'll find help easier to get if you:
1. Ask a direct question.
2. Demonstrate that you've put some effort into solving your problem (show your code with code tags, show error messages, ask specific questions regarding your code rather than general questions).
good luck!

Similar Messages

Add carriage return in XML file

Hi,
I found a topic that correspond to my requirement :
[Add carriage return in XML file|https://wiki.sdn.sap.com/wiki/display/XI/HowtoappendCarriageReturnintheendofeachtagofxml+file]
But i don't know where created this udf, which input parameter pass?
Thank you for your help.

Hi Frantzy,
The link does not give enough explanation. What I am assuming is if you have xml string in one field then if you need to add new line after each tag then you can follow that.
If you want a udf where you want to insert a new line use this udf:
Create a Value UDF with one input argument 'a' and name the udf as addnewline. Then add this code:
Imports: java.*;
String lines;
lines = "";
lines = lines.concat(a + '\n' );
return lines;
Then where ever you want a new line just add this udf in your mapping. If you want a new line for 10 fields then you can put in all the 10 fields.
Example:
Source field --> logic --> udf (addnewline) --> target.
So after logic if you have the value as 123 then in the target you will see 123 followed by a carriage return.
Regards,
---Satish

How to add payment advice for XML file filed in vendor account group

Hi All,
I have a requirment to add Payment advice for XML file field in vendor account group under payment transcation tap,
kindly advice where i can add above mention field in vendor account group.
thanks
khaja

done

Add Doctype to the XML File

Experts,
My Scenario is JDBC to File
For the resultant xml file i have to include a <DOCTYPE> after
<?xml version="1.0" encoding="UTF-8" ?> while passing it to legacy system ?
I had written an XSLT Code to acheive this, i checked in XML spy and it is working.
but in moni iam getting an error in message mapping
my XSLT Code is
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">

<xsl:output method="xml" indent="no" doctype-system="http://integratex.quality.techdata.de:8080/ix/dtd/ixOrder.dtd"/>

<xsl:template match="node() | @*">
            <ns0:MT_ASNDATAOUT xmlns:ns0="http://aaaaa/sd/SD152.25">
            <xsl:copy>
                                                <xsl:apply-templates select="node() | @*"/>
            </xsl:copy>
            </ns0:MT_ASNDATAOUT>
</xsl:template>
</xsl:stylesheet>
and the error in moni is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">GENERIC</SAP:Code>
<SAP:P1>Parsing error after multi mapping.</SAP:P1>
<SAP:P2>Expected Message<i> instead of Messages</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Parsing error after multi mapping.Expected Message<i> instead of Messages</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Iam doing multi mapping between source and target, is m ulti mapping causing the issue?
and also check my xslt code,it is working in xml spy as desired.
Please help me on this
Appreciate your help.
Thanks
Srinivas

Hi,
Yes you have to chnage the DTD structure to add DOCTYPE Value,one morething when you executing XSLT mapping Multi Mapping scenario it shouls also supports multi mapping feature.Fisrt execute XSLT Mapping program without multi mapping,let me know how its behaving.
Regards,
Raj

Need to add DTD to my XML file

Hi,
i have created my XML file and now i have to add DTD to this file. Is there a method to do this?
     DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();          try {
             DocumentBuilder builder = factory.newDocumentBuilder();                       document = builder.newDocument();
     catch ( ParserConfigurationException pce ) {
                            pce.printStackTrace();
//add DTD here
     Element root = document.createElement( rootName );
     document.appendChild( root );Thanks in advance.
Nereida

I'm Having the same problem.
I generate a XML document using DOM. And the content of this document varies a lot. It is built based on the resultset of a database query. If the query results 3 columns: name, address and fone. The document will have 3 a structure like this:
<root>
<row number=1>
<name>John</name>
<address>J Street</address>
<fone>12345678</fone>
</row>
<row number=2>
<name>Peter</name>
<address>K Street</address>
<fone>87654321</fone>
</row>
</root>
What i mean is. The tags inside the row tag will allways be different. Depending on the columns from the query.
This document will be parsed by a SAX Parser (impossible to use DOM becouse the machine where it will be parsed has very few resources). And then I'll need the DTD for parsing it better.
The problem is. How to create Dynamicaly the DTD for a DOM Document? How to put it in the resulting XML File?
Thanks!

Using Java, How can I Update, Add, Delete nodes in XML Files.

Hi,
I want to store the student record (like Name, Age, school name, total mark etc.,) as nodes in the XMLfile. Also I should able to Update, Add, Delete any nodes (student record) in the XML file. How can I achieve this...using Java
I am able to read the content of the xml file using xml-parser. But my problem is
updating the xml file.
pls suggest some solutions or links with " example source code"
Thanks :-)

There are 2 kinds of XML parsers : SAX and DOM. DOM seems to suit your need. You can use JAXP APIs to add, delete or change nodes or attributes.
http://java.sun.com/webservices/jaxp/dist/1.1/docs/tutorial/TOC.html provides contents that would satisfy most of the needs.
To save a DOM modified XML file use java IO APIs to write to the same file from which it was read using a Document object ( doc.getNodeValue() ).

How to add URL links in XML file?

Hi,
I'm having problem with adding the URL links to the flash output. I'm using the XML file to call images and then the corrsponding links. Images are called correctly but when I try to add a link I'm not getting the links, but instead getting the HTML anchor tags as texts. I'm using the XML escape characters to escape the HTML tags but the results are not what I need.
I'm using the following code:
<thumbnail preview="large.jpg" thumb="thumb.jpg">
<title><![CDATA[Finance Services]]></title>
<discription><![CDATA[<a href="http://www.google.ca">Google</a>]]></discription>
</thumbnail>
Output:
Images are displayed correctly, but instead of getting the links, I'm getting following text message:
<a href="http://www.google.ca">Google</a>
I need to find out what I'm doing wrong. Am I using the correct way to add the links or not?
Thanks for your time.

I'm using following code for the Description part, where I need to place the HTML tags:
var _discription:TextField = previewHolder.discriptionText.discriptionText;
_discription.htmlText = _xml.thumbnails.thumbnail[photoNum].discription.toString()
I'm using the htmlText, I tried replacing htmlText with tf.htmlText, but it didn't work. I'm importing the text field using import flash.text.TextField; do I need to import something for HTML tags to work?

Add xmlns tag to Xml file using DBMS_XMLGEN

I am using Oracle Release 10.1.0.4.2 version .
I want to create a xml file according to some data available in the relational database tables. For the same i created object types and then view with the object types since data is scattered in many tables.
Then i used DBMS_XMLGEN.getxml to generate the xml with query from the object view.
Is there an option to add xmlns attribute to the generated xml file.
Please let me know if any additional details are needed.

If you want to add the namespace declaration in the root element, I don't think it's possible with DBMS_XMLGEN directly.
You can instruct DBMS_XMLGEN to treat some object fields as XML attributes by prefixing them with "@" (e.g. "@my_attribute") but you cannot control that for enclosing elements.
A possible solution is to add it afterwards using XSLT, or insertChildXML, but apparently the latter is not available in your version.
However...
For the same i created object types and then view with the object types since data is scattered in many tables.Since the data comes from different tables, why not use SQL and SQL/XML functions to build the document?
It's straightforward, simple, and doesn't need additional objects.
select xmlelement("Departments",
         xmlattributes('http://xmlns.example.org' as "xmlns")
       , xmlagg(
           xmlelement("Department",
             xmlattributes(d.deptno as "Id")
           , xmlelement("Name", d.dname)
           , xmlelement("Employees"
             , xmlagg(
                 xmlelement("Employee",
                   xmlattributes(e.empno as "Id")
                 , xmlforest(
                     e.ename as "Name"
                   , e.job as "Job"
                 ) order by e.empno
           ) order by d.deptno
from scott.dept d
     join scott.emp e on e.deptno = d.deptno
group by d.deptno, d.dname
;Output :
<Departments xmlns="http://xmlns.example.org">
<Department Id="10">
    <Name>ACCOUNTING</Name>
    <Employees>
      <Employee Id="7782">
        <Name>CLARK</Name>
        <Job>MANAGER</Job>
      </Employee>
      <Employee Id="7839">
        <Name>KING</Name>
        <Job>PRESIDENT</Job>
      </Employee>
      <Employee Id="7934">
        <Name>MILLER</Name>
        <Job>CLERK</Job>
      </Employee>
    </Employees>
</Department>
<Department Id="20">
    <Name>RESEARCH</Name>
    <Employees>
      <Employee Id="7369">
        <Name>SMITH</Name>
        <Job>CLERK</Job>
      </Employee>
      <Employee Id="7566">
        <Name>JONES</Name>
        <Job>MANAGER</Job>
      </Employee>
      <Employee Id="7902">
        <Name>FORD</Name>
        <Job>ANALYST</Job>
      </Employee>
    </Employees>
</Department>
<Department Id="30">
    <Name>SALES</Name>
    <Employees>
      <Employee Id="7499">
        <Name>ALLEN</Name>
        <Job>SALESMAN</Job>
      </Employee>
      <Employee Id="7521">
        <Name>WARD</Name>
        <Job>SALESMAN</Job>
      </Employee>
      <Employee Id="7654">
        <Name>MARTIN</Name>
        <Job>SALESMAN</Job>
      </Employee>
      <Employee Id="7698">
        <Name>BLAKE</Name>
        <Job>MANAGER</Job>
      </Employee>
      <Employee Id="7844">
        <Name>TURNER</Name>
        <Job>SALESMAN</Job>
      </Employee>
      <Employee Id="7900">
        <Name>JAMES</Name>
        <Job>CLERK</Job>
      </Employee>
    </Employees>
</Department>
</Departments>

Need to add alphabet coordinates in xml file for typewriter file

I have a flash typewriter file which displays text that is
preloaded inside the flash file. It has an animated pencil that
"draws" out each character. It gets it's letter coordinates from an
xml file and I would like to add a few more symbols so it would
draw them out. How do I get started on figuring this out. The
coordinates in the xml file must have been generated by some kind
of software because I can't imagine the author of this file hand
wrote each one. I tried to contact the author but I think they're
too busy or not interested.
thanks

Hi Frantzy,
The link does not give enough explanation. What I am assuming is if you have xml string in one field then if you need to add new line after each tag then you can follow that.
If you want a udf where you want to insert a new line use this udf:
Create a Value UDF with one input argument 'a' and name the udf as addnewline. Then add this code:
Imports: java.*;
String lines;
lines = "";
lines = lines.concat(a + '\n' );
return lines;
Then where ever you want a new line just add this udf in your mapping. If you want a new line for 10 fields then you can put in all the 10 fields.
Example:
Source field --> logic --> udf (addnewline) --> target.
So after logic if you have the value as 123 then in the target you will see 123 followed by a carriage return.
Regards,
---Satish

Can't Figure Out How to Add Nodes to Existing XML File by Attribute

<?xml version="1.0" encoding="UTF-8"?>
-<Project_Data>
-<Project_Info>
<Client>frankLINVILE</Client>
<Name>COOKIE MONSTER INDICTMNET</Name>
<Number>198883cookie</Number>
<Tester>JK</Tester>
<Reviewer>CM</Reviewer>
<Location>Sesame Street, MD</Location>
<SD>03/10/2015</SD>
<Boring_Header>Boring1</Boring_Header>
<Sample_Header>Sample2</Sample_Header>
<Depth_Header>Depth3</Depth_Header>
<Location_Header>Location4</Location_Header>
<SD_Header>Sample Date5</SD_Header>
<Remarks>asdf sdafas</Remarks>
<Is_LOC_Global>True</Is_LOC_Global>
<Is_SD_Global>True</Is_SD_Global>
<Count>12</Count>
<Has_MC_Data>N</Has_MC_Data>
</Project_Info>
-<Samples>
-<Sample ID="@B1 S1 1-2 SESAME STREET, MD 03/10/2015">
<Boring>b1</Boring>
<Sample>s1</Sample>
<Depth>1-2</Depth>
<Location>SESAME STREET, MD</Location>
<SD>03/10/2015</SD>
<Remarks>frank1</Remarks>
<Login_Order>1</Login_Order>
<Report_Order>1</Report_Order>
<Has_Data>Y</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
-<Sample ID="@B2 S2 2-2 SESAME STREET, MD 03/10/2015">
<Boring>b2</Boring>
<Sample>s2</Sample>
<Depth>2-2</Depth>
<Location>SESAME STREET, MD</Location>
<SD>03/10/2015</SD>
<Remarks>frakn2</Remarks>
<Login_Order>2</Login_Order>
<Report_Order>2</Report_Order>
<Has_Data>Y</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
-<Sample ID="@B3 S3 3-3 SESAME STREET, MD 03/10/2015">
<Boring>b3</Boring>
<Sample>s3</Sample>
<Depth>3-3</Depth>
<Location>SESAME STREET, MD</Location>
<SD>03/10/2015</SD>
<Remarks>frakn3</Remarks>
<Login_Order>3</Login_Order>
<Report_Order>3</Report_Order>
<Has_Data>Y</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
-<Sample ID="@B4 S4 4-4 SESAME STREET, MD 03/10/2015">
<Boring>b4</Boring>
<Sample>s4</Sample>
<Depth>4-4</Depth>
<Location>SESAME STREET, MD</Location>
<SD>03/10/2015</SD>
<Remarks>hi4</Remarks>
<Login_Order>4</Login_Order>
<Report_Order>4</Report_Order>
<Has_Data>Y</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
-<Sample ID="@B5 S5 5-5 SESAME STREET, MD 03/10/2015">
<Boring>b5</Boring>
<Sample>s5</Sample>
<Depth>5-5</Depth>
<Location>SESAME STREET, MD</Location>
<SD>03/10/2015</SD>
<Remarks>hi5</Remarks>
<Login_Order>5</Login_Order>
<Report_Order>5</Report_Order>
<Has_Data>Y</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
-<Sample ID="@B6 S6 6-6 SESAME STREET, MD 03/10/2015">
<Boring>b6</Boring>
<Sample>s6</Sample>
<Depth>6-6</Depth>
<Location>SESAME STREET, MD</Location>
<SD>03/10/2015</SD>
<Remarks>hi6</Remarks>
<Login_Order>6</Login_Order>
<Report_Order>6</Report_Order>
<Has_Data>Y</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
-<Sample ID="@B7 S7 7-7 SESAME STREET, MD 03/10/2015">
<Boring>b7</Boring>
<Sample>s7</Sample>
<Depth>7-7</Depth>
<Location>SESAME STREET, MD</Location>
<SD>03/10/2015</SD>
<Remarks>hi7</Remarks>
<Login_Order>9</Login_Order>
<Report_Order>9</Report_Order>
<Has_Data>N</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
-<Sample ID="@B8 S8 8-8 SESAME STREET, MD 03/10/2015">
<Boring>b8</Boring>
<Sample>s8</Sample>
<Depth>8-8</Depth>
<Location>SESAME STREET, MD</Location>
<SD>03/10/2015</SD>
<Remarks>hi8</Remarks>
<Login_Order>10</Login_Order>
<Report_Order>10</Report_Order>
<Has_Data>Y</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
-<Sample ID="@B9 S9 9-9 SESAME STREET, MD 03/10/2015">
<Boring>b9</Boring>
<Sample>s9</Sample>
<Depth>9-9</Depth>
<Location>SESAME STREET, MD</Location>
<SD>03/10/2015</SD>
<Remarks>hi9</Remarks>
<Login_Order>11</Login_Order>
<Report_Order>11</Report_Order>
<Has_Data>Y</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
-<Sample ID="@B10 S10 10-10 SESAME STREET, MD 03/10/2015">
<Boring>b10</Boring>
<Sample>s10</Sample>
<Depth>10-10</Depth>
<Location>SESAME STREET, MD</Location>
<SD>03/10/2015</SD>
<Remarks>hi10</Remarks>
<Login_Order>12</Login_Order>
<Report_Order>12</Report_Order>
<Has_Data>N</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
-<Sample ID="@FRANK FARKN2">
<Boring>frank</Boring>
<Sample>farkn2</Sample>
<Depth> </Depth>
<Location> </Location>
<SD> </SD>
<Remarks> </Remarks>
<Login_Order>7</Login_Order>
<Report_Order>7</Report_Order>
<Has_Data>N</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
-<Sample ID="@FRANK FRANK">
<Boring>frank</Boring>
<Sample>frank</Sample>
<Depth> </Depth>
<Location> </Location>
<SD> </SD>
<Remarks> </Remarks>
<Login_Order>8</Login_Order>
<Report_Order>8</Report_Order>
<Has_Data>N</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
</Samples>
</Project_Data
What I need to do is find the sample by its ID attribute...IN THEN add the following
<MC_Data>
<Wet>blah</Wet
<Dry>blah</Dry>
</MC_Data>
Here is the code I have now, which doesn't work...
Public Sub XML_Add_Child_Node_Group(Sample_ID As String, Which_Category As Integer)
        If File.Exists(Program_Settings_File.PG_Filepath) = False Then MsgBox("The program settings file for the program has been moved or deleted! Cancelled.") : Exit Sub
        Dim XMLFile As New Xml.XmlDocument, NewNode As Xml.XmlElement = Nothing, NewChild As Xml.XmlElement = Nothing
        XMLFile.Load(Current_File.Current_File_Path)
        Dim Root_Node As XmlNode = XMLFile.SelectSingleNode("/Project_Data/Samples/[@ID='" & Sample_ID & "']")
        Dim Root_Element As Xml.XmlElement = CType(XMLFile.SelectSingleNode("/Project_Data/Samples/[@ID='" & Sample_ID & "']"), XmlElement)
        '1 = Add MC nodes
        Select Which_Category
            Case 1
                '----Add new node.
                NewNode = XMLFile.CreateElement("MC_Data")
                '----Add children nodes.
                NewChild = XMLFile.CreateElement("MC_Wet") : NewNode.AppendChild(NewChild)
                'MsgBox(NewNode.Name)
                NewChild = XMLFile.CreateElement("MC_Dry") : NewNode.AppendChild(NewChild)
                NewChild = XMLFile.CreateElement("MC_Tare") : NewNode.AppendChild(NewChild)
                NewChild = XMLFile.CreateElement("MC_Tare_No") : NewNode.AppendChild(NewChild)
                NewChild = XMLFile.CreateElement("MC_Remarks") : NewNode.AppendChild(NewChild)
                NewChild = XMLFile.CreateElement("MC_MC") : NewNode.AppendChild(NewChild)
                Root_Element.AppendChild(NewNode)
        End Select
        '----Add entire tree.
        XMLFile.Save(Current_File.Current_File_Path)
    End Sub
No matter what, it will not add these nodes. Can anyone help me out? Thanks ahead of time...
Shawn

Here is the XML
<?xml version="1.0" encoding="UTF-8"?>
<Project_Data>
<Project_Info>
<Client>frankLINVILE</Client>
<Name>COOKIE MONSTER INDICTMNET</Name>
<Number>198883cookie</Number>
<Tester>JK</Tester>
<Reviewer>CM</Reviewer>
<Location>Sesame Street, MD</Location>
<SD>03/10/2015</SD>
<Boring_Header>Boring1</Boring_Header>
<Sample_Header>Sample2</Sample_Header>
<Depth_Header>Depth3</Depth_Header>
<Location_Header>Location4</Location_Header>
<SD_Header>Sample Date5</SD_Header>
<Remarks>asdf sdafas</Remarks>
<Is_LOC_Global>True</Is_LOC_Global>
<Is_SD_Global>True</Is_SD_Global>
<Count>12</Count>
<Has_MC_Data>N</Has_MC_Data>
</Project_Info>
<Samples>
<Sample ID="@B1 S1 1-2 SESAME STREET, MD 03/10/2015">
<Boring>b1</Boring>
<Sample>s1</Sample>
<Depth>1-2</Depth>
<Location>SESAME STREET, MD</Location>
<SD>03/10/2015</SD>
<Remarks>frank1</Remarks>
<Login_Order>1</Login_Order>
<Report_Order>1</Report_Order>
<Has_Data>Y</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
<Sample ID="@B2 S2 2-2 SESAME STREET, MD 03/10/2015">
<Boring>b2</Boring>
<Sample>s2</Sample>
<Depth>2-2</Depth>
<Location>SESAME STREET, MD</Location>
<SD>03/10/2015</SD>
<Remarks>frakn2</Remarks>
<Login_Order>2</Login_Order>
<Report_Order>2</Report_Order>
<Has_Data>Y</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
<Sample ID="@B3 S3 3-3 SESAME STREET, MD 03/10/2015">
<Boring>b3</Boring>
<Sample>s3</Sample>
<Depth>3-3</Depth>
<Location>SESAME STREET, MD</Location>
<SD>03/10/2015</SD>
<Remarks>frakn3</Remarks>
<Login_Order>3</Login_Order>
<Report_Order>3</Report_Order>
<Has_Data>Y</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
<Sample ID="@B4 S4 4-4 SESAME STREET, MD 03/10/2015">
<Boring>b4</Boring>
<Sample>s4</Sample>
<Depth>4-4</Depth>
<Location>SESAME STREET, MD</Location>
<SD>03/10/2015</SD>
<Remarks>hi4</Remarks>
<Login_Order>4</Login_Order>
<Report_Order>4</Report_Order>
<Has_Data>Y</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
<Sample ID="@B5 S5 5-5 SESAME STREET, MD 03/10/2015">
<Boring>b5</Boring>
<Sample>s5</Sample>
<Depth>5-5</Depth>
<Location>SESAME STREET, MD</Location>
<SD>03/10/2015</SD>
<Remarks>hi5</Remarks>
<Login_Order>5</Login_Order>
<Report_Order>5</Report_Order>
<Has_Data>Y</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
<Sample ID="@B6 S6 6-6 SESAME STREET, MD 03/10/2015">
<Boring>b6</Boring>
<Sample>s6</Sample>
<Depth>6-6</Depth>
<Location>SESAME STREET, MD</Location>
<SD>03/10/2015</SD>
<Remarks>hi6</Remarks>
<Login_Order>6</Login_Order>
<Report_Order>6</Report_Order>
<Has_Data>Y</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
<Sample ID="@B7 S7 7-7 SESAME STREET, MD 03/10/2015">
<Boring>b7</Boring>
<Sample>s7</Sample>
<Depth>7-7</Depth>
<Location>SESAME STREET, MD</Location>
<SD>03/10/2015</SD>
<Remarks>hi7</Remarks>
<Login_Order>9</Login_Order>
<Report_Order>9</Report_Order>
<Has_Data>N</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
<Sample ID="@B8 S8 8-8 SESAME STREET, MD 03/10/2015">
<Boring>b8</Boring>
<Sample>s8</Sample>
<Depth>8-8</Depth>
<Location>SESAME STREET, MD</Location>
<SD>03/10/2015</SD>
<Remarks>hi8</Remarks>
<Login_Order>10</Login_Order>
<Report_Order>10</Report_Order>
<Has_Data>Y</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
<Sample ID="@B9 S9 9-9 SESAME STREET, MD 03/10/2015">
<Boring>b9</Boring>
<Sample>s9</Sample>
<Depth>9-9</Depth>
<Location>SESAME STREET, MD</Location>
<SD>03/10/2015</SD>
<Remarks>hi9</Remarks>
<Login_Order>11</Login_Order>
<Report_Order>11</Report_Order>
<Has_Data>Y</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
<Sample ID="@B10 S10 10-10 SESAME STREET, MD 03/10/2015">
<Boring>b10</Boring>
<Sample>s10</Sample>
<Depth>10-10</Depth>
<Location>SESAME STREET, MD</Location>
<SD>03/10/2015</SD>
<Remarks>hi10</Remarks>
<Login_Order>12</Login_Order>
<Report_Order>12</Report_Order>
<Has_Data>N</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
<Sample ID="@FRANK FARKN2">
<Boring>frank</Boring>
<Sample>farkn2</Sample>
<Depth> </Depth>
<Location> </Location>
<SD> </SD>
<Remarks> </Remarks>
<Login_Order>7</Login_Order>
<Report_Order>7</Report_Order>
<Has_Data>N</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
<Sample ID="@FRANK FRANK">
<Boring>frank</Boring>
<Sample>frank</Sample>
<Depth> </Depth>
<Location> </Location>
<SD> </SD>
<Remarks> </Remarks>
<Login_Order>8</Login_Order>
<Report_Order>8</Report_Order>
<Has_Data>N</Has_Data>
<Has_MC_Data>N</Has_MC_Data>
<Has_GSA_Data>N</Has_GSA_Data>
<Has_P_Data>N</Has_P_Data>
<Has_C_Data>N</Has_C_Data>
<Has_H_Data>N</Has_H_Data>
<Has_USDA_Data>N</Has_USDA_Data>
<Has_CM_Data>N</Has_CM_Data>
<Has_UCS_Data>N</Has_UCS_Data>
<Has_Cons_Data>N</Has_Cons_Data>
<Has_ConsSw_Data>N</Has_ConsSw_Data>
<Has_Pills_Data>N</Has_Pills_Data>
<Has_UCSC_Data>N</Has_UCSC_Data>
</Sample>
</Samples>
</Project_Data>
jdweng

How to add namespace prefix to XML file?

I have a file(XML) to proxy scenario. I 've created an asynch Inbound message and a asynch Outbound message.
I have generated the class in Sproxy of my R/3 System.
In the Integration directory I have 2 business system :
-one which sent the file
-my r/3 system
System which send file generate XML like this:
<?xml version="1.0" encoding="UTF-8" ?>
   <batch id="20080211001" customer="some customer" user="user" language="EN">
     <structure>
       <localization>
          <string id="customer" text="Customer" />
etc........
As you see, it have not any namespace prefix.
How can I insert namespace prefix in this file with XI tools?

Hi Pavel
I am also facing the same issue
my XML structure is quite complex
<ROW EVENT="RE" SEQ="9" MORE="Y" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" >
<FileDate Internal="61409" ROWID="Y">02/17/2009</FileDate>
<FileSeq ROWID="Y">9</FileSeq>
<Event>RE</Event>
<Grp>3</Grp>
<LinkFileTime>42324</LinkFileTime>
<Mrn></Mrn>
<ROW DESCR="RE" TABLE="PAT" EVENT="RE">
    <BusTel/>
    <BusTelHipaaConsent/>
    <Cont1Addr1/>
<ROW DESCR="RE" TABLE="INS" EVENT="RE">
    <DictRef1/>
    <DictRef10/>
Do i have to create the Message Interface for Outbound Synchronous ..
<DictRef11/>

How to add data in xml file

Hi ALL
I want to add new fields on seeded EBS page to store their values in hr_api_transaction table whoch contain information of other fields on that page which are seeded
but that table has one column which stores xml file and that xml file has all information about that page's fields
how can I store my custom fields values in that xml file ?

Hi,
As Andy said, add data to an xml file is overwriting, if you mean append data to xml file, please look this article:
http://codesamplez.com/programming/linq-to-xml-tutorial, Since this issue is more related to ASP.net, you could also ask this issue in asp.net forum:
http://forums.asp.net/
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can i write also to xml file the settings of the Tag property to identify if it's "file" or "directory" ?

The first thing i'm doing is to get from my ftp server all the ftp content information and i tag it so i can identify later if it's a file or a directory:
private int total_dirs;
private int searched_until_now_dirs;
private int max_percentage;
private TreeNode directories_real_time;
private string SummaryText;
private TreeNode CreateDirectoryNode(string path, string name , int recursive_levl )
var directoryNode = new TreeNode(name);
var directoryListing = GetDirectoryListing(path);
var directories = directoryListing.Where(d => d.IsDirectory);
var files = directoryListing.Where(d => !d.IsDirectory);
total_dirs += directories.Count<FTPListDetail>();
searched_until_now_dirs++;
int percentage = 0;
foreach (var dir in directories)
directoryNode.Nodes.Add(CreateDirectoryNode(dir.FullPath, dir.Name, recursive_levl+1));
if (recursive_levl == 1)
TreeNode temp_tn = (TreeNode)directoryNode.Clone();
this.BeginInvoke(new MethodInvoker( delegate
UpdateList(temp_tn);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
foreach (var file in files)
TreeNode file_tree_node = new TreeNode(file.Name);
file_tree_node.Tag = "file";
directoryNode.Nodes.Add(file_tree_node);
numberOfFiles.Add(file.FullPath);
return directoryNode;
The line i'm using to Tag is:
file_tree_node.Tag = "file";
So i know what is "file" then i make a simple check if the Tag is not null then i know it's a "file" if it's null then it's directory.
For example this is how i'm checking if it's file or directory after getting all the content from my ftp server:
if (treeViewMS1.SelectedNode.Tag != null)
string s = (string)treeViewMS1.SelectedNode.Tag;
if (s == "file")
file = false;
DeleteFile(treeViewMS1.SelectedNode.FullPath, file);
else
RemoveDirectoriesRecursive(treeViewMS1.SelectedNode, treeViewMS1.SelectedNode.FullPath);
I also update in real time when getting the content of the ftp server xml file on my hard disk with the treeView structure information so when i'm running the program each time it will load the treeView structure with all directories and files.
This is the class of the xml file:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Xml;
using System.Windows.Forms;
namespace FTP_ProgressBar
class TreeViewXmlPopulation
// Xml tag for node, e.g. 'node' in case of <node></node>
private const string XmlNodeTag = "node";
// Xml attributes for node e.g. <node text="Asia" tag=""
// imageindex="1"></node>
private const string XmlNodeTextAtt = "text";
private const string XmlNodeTagAtt = "tag";
private const string XmlNodeImageIndexAtt = "imageindex";
public static void DeserializeTreeView(TreeView treeView, string fileName)
XmlTextReader reader = null;
try
// disabling re-drawing of treeview till all nodes are added
treeView.BeginUpdate();
reader = new XmlTextReader(fileName);
TreeNode parentNode = null;
while (reader.Read())
if (reader.NodeType == XmlNodeType.Element)
if (reader.Name == XmlNodeTag)
TreeNode newNode = new TreeNode();
bool isEmptyElement = reader.IsEmptyElement;
// loading node attributes
int attributeCount = reader.AttributeCount;
if (attributeCount > 0)
for (int i = 0; i < attributeCount; i++)
reader.MoveToAttribute(i);
SetAttributeValue(newNode,
reader.Name, reader.Value);
// add new node to Parent Node or TreeView
if (parentNode != null)
parentNode.Nodes.Add(newNode);
else
treeView.Nodes.Add(newNode);
// making current node 'ParentNode' if its not empty
if (!isEmptyElement)
parentNode = newNode;
// moving up to in TreeView if end tag is encountered
else if (reader.NodeType == XmlNodeType.EndElement)
if (reader.Name == XmlNodeTag)
parentNode = parentNode.Parent;
else if (reader.NodeType == XmlNodeType.XmlDeclaration)
//Ignore Xml Declaration
else if (reader.NodeType == XmlNodeType.None)
return;
else if (reader.NodeType == XmlNodeType.Text)
parentNode.Nodes.Add(reader.Value);
finally
// enabling redrawing of treeview after all nodes are added
treeView.EndUpdate();
reader.Close();
/// <span class="code-SummaryComment"><summary>
/// Used by Deserialize method for setting properties of
/// TreeNode from xml node attributes
/// <span class="code-SummaryComment"></summary>
private static void SetAttributeValue(TreeNode node,
string propertyName, string value)
if (propertyName == XmlNodeTextAtt)
node.Text = value;
else if (propertyName == XmlNodeImageIndexAtt)
node.ImageIndex = int.Parse(value);
else if (propertyName == XmlNodeTagAtt)
node.Tag = value;
public static void SerializeTreeView(TreeView treeView, string fileName)
XmlTextWriter textWriter = new XmlTextWriter(fileName,
System.Text.Encoding.ASCII);
// writing the xml declaration tag
textWriter.WriteStartDocument();
//textWriter.WriteRaw("\r\n");
// writing the main tag that encloses all node tags
textWriter.WriteStartElement("TreeView");
// save the nodes, recursive method
SaveNodes(treeView.Nodes, textWriter);
textWriter.WriteEndElement();
textWriter.Close();
private static void SaveNodes(TreeNodeCollection nodesCollection,
XmlTextWriter textWriter)
for (int i = 0; i < nodesCollection.Count; i++)
TreeNode node = nodesCollection[i];
textWriter.WriteStartElement(XmlNodeTag);
textWriter.WriteAttributeString(XmlNodeTextAtt,
node.Text);
textWriter.WriteAttributeString(
XmlNodeImageIndexAtt, node.ImageIndex.ToString());
if (node.Tag != null)
textWriter.WriteAttributeString(XmlNodeTagAtt,
node.Tag.ToString());
// add other node properties to serialize here
if (node.Nodes.Count > 0)
SaveNodes(node.Nodes, textWriter);
textWriter.WriteEndElement();
And this is how i'm using the class this method i'm calling it inside the CreateDirectoryNode and i'm updating the treeView in real time when getting the ftp content from the server i build the treeView structure in real time.
DateTime last_update;
private void UpdateList(TreeNode tn_rt)
TimeSpan ts = DateTime.Now - last_update;
if (ts.TotalMilliseconds > 200)
last_update = DateTime.Now;
treeViewMS1.BeginUpdate();
treeViewMS1.Nodes.Clear();
treeViewMS1.Nodes.Add(tn_rt);
TreeViewXmlPopulation.SerializeTreeView(treeViewMS1, @"c:\XmlFile\Original.xml");
ExpandToLevel(treeViewMS1.Nodes, 1);
treeViewMS1.EndUpdate();
And when i'm running the program again in the constructor i'm doing:
if (File.Exists(@"c:\XmlFile\Original.xml"))
TreeViewXmlPopulation.DeserializeTreeView(treeViewMS1, @"c:\XmlFile\Original.xml");
My question is how can i update the xml file in real time like i'm doing now but also with the Tag property so next time i will run the program and will not get the content from the ftp i will know in the treeView what is file and what is directory.
The problem is that now if i will run the program the Tag property is null. I must get the ftp content from the server each time.
But i want that withoutout getting the ftp content from server to Tag each file as file in the treeView structure.
So what i need is somehow where i;m Tagging "file" or maybe when updating the treeView also to add something to the xml file so when i will run the progrma again and read back the xml file it will also Tag the files in the treeView.

Hi
Chocolade1972,
Your case related to Winform Data Controls, So i will move your thread to Windows Forms> Windows
Forms Data Controls and Databinding forum for better support.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Adding data in an XML file

how to add data in xml file from textbox in c# without overwriting???

Hi,
As Andy said, add data to an xml file is overwriting, if you mean append data to xml file, please look this article:
http://codesamplez.com/programming/linq-to-xml-tutorial, Since this issue is more related to ASP.net, you could also ask this issue in asp.net forum:
http://forums.asp.net/
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Manipulating XML file using flex 2.0

Hi,
how to add contents in to xml file using flex 2.0, ie i
actually wants to write data in to a xml file, so that data to be
appended at the end of the file.
Kumar

You can't! Well, at least Flex cannot do this. All Flex can
do is send this data -- any data -- to the server and it's up to
you how you want to append this data to a file on the server.
You see, flex can't write to local files. If you looking for
client side file manipulation, take a look at Flex's desktop
brother call AIR!
ATTA

To add methods in a xml file.

Similar Messages

Maybe you are looking for