To and fro communication between mobile & sap system

Hi,
I want to enable a function in basis system in which on locking the sap userid, user will send an sms (using mobile) to sap system (ecc 6.0). Syetem will authenticate the request and will revert as sms to same user on mobile either success with unlocking the userid and resetting the password or authentication failure message.
Is this possible to send and receive such kind of sms to and from sap system?
If yes is it possible for system to read the input data and trigger the unlock command with password reset?
please advice.
Thanks.
- Gaurav

Hi Gaurav,
Your requirement seems interesting.
1. An SAP system uses SAPconnect and the HTTP plug-in to communicate with a paging provider that forwards SMS messages.
see this too: http://help.sap.com/saphelp_nw2004s/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
2. MESSAGEmanager SAP is a comprehensive SAP certified document delivery solution that
provides an easy-to-use and seamless connection to fax, email and SMS for R/3
applications.
check this: http://www.xcellerateit.com/whitepapers/syssol/spec_sap.pdf
Though i have not done this myself, the above may help you build an idea.
Also, post your experiences; so that it will be usefull for people on forum.
Regards
Divya

Similar Messages

Communication between non SAP and SAP

HI,
do you have some information about communication between non SAP and ERP (WebAs) SAP System ?
I would like to receive an xml file or xml IDoc from a Java Plattform (non SAP) into our SAP ERP System as an own defined IDoc.
remember: we don´t have a converter like XI.
What about using a proxy (do you have some information/blog how to use that) ?
What about using a webservice (do you have some information/blog how to use that) ?
What about storing the xml on the application server (do you have some information/blog how to use that) ?
How to transform xml to IDoc ?
other methods ?
Thanks for your help.
Gordon

Here is a link to connecting MS SQL Server with SAP using Open Hub connection.
http://msdn.microsoft.com/en-us/library/dd299430(SQL.100).aspx
This might give you some insight into connecting with Non SAP Systems.
I have used the information from this link to export data from SAP to MS SQL Server.
Good Luck.
MP.

Conectivity between existent SAP Systems and migrated system to MSCS Cluste

Hi
I have an existing SAP NW PI 7.0 (Abap + Java on Windows 2003 - SQLServer 2005) and plan to migrate to a cluster with new hardware (MSCS).
I have to prepare for the installation by creating a homogeneous copy of the database but I'm a little bit confused.
-Can I use backup/restore method or only can use import/export with R3load tools? The target system is windows and sql server same versions.
-If I can use backup/restore... what is the rigth sequence to the installation? Can I use sapinst with mixed high availability options and System copy options?
-I need to use in the target system the same hostname and IP address of the actual system, so in the Follow-Up Activities we do not change the configuration between the actual system (SAP NW PI) and other existent systems in the landscape... but I do not know what is the location in the cluster to this hostname and IP:
*The central instance will be in the local disks in the node 1. Is the node 1 the rigth option to use the hostname and IP of the actual system?
*The SAP Cluster group has a virtual hostname and IP, it has message and enqueu services. Is the sap cluster group he rigth option to use the hostname and IP of the actual system?
How is the communication between the other systemas and the new clustered system?
Thanks for your help

Can I use backup/restore method or only can use import/export with R3load tools? The target system is windows and sql server same versions.
You should follow the SAP guidlines in performing a homogeneous system copy.
I need to use in the target system the same hostname and IP address of the actual system, so in the Follow-Up Activities we do not change the configuration between the actual system (SAP NW PI) and other existent systems in the landscape... but I do not know what is the location in the cluster to this hostname and IP
This is not possible. If you follow the SAP instructions for installing NW 7.0 in MSCS you will create two cluster groups: DBGroup and SAPGroup. You will therefore have two virtual IP addresses, one for SAP cluster group and one for DB cluster group. If you retain the current IP address/hostname for the virtual SAPGroup, you will need to follow the SAP guidelines for performing a SAP system copy to find where to change the database hostname/IP addresses to point to your new DBGroup.
The central instance will be in the local disks in the node 1. Is the node 1 the rigth option to use the hostname and IP of the actual system?
If you are meaning the ASCS then this should be installed on the disks that are part of the SAPGroup in the cluster.
If you mean the dialog instance (or the Central Instance of a Java stack) then this can be on a local disk for node 1, and not in the cluster.
The SAP Cluster group has a virtual hostname and IP, it has message and enqueu services. Is the sap cluster group he rigth option to use the hostname and IP of the actual system
Yes, this will be the message server host for ASCS.

Connection between 2 SAP system

Hi.
I want to send and receive an IDoc between two SAP system. but i can't connected to an other syestem. i try it juste between two different mandant.
Can some one help me.
Thinks.
Issam

Hi,
Through RFC (SM59) u can connect the TWO SAP systems.........
If u are in SAP 4.7 , once u enter into SM59 u will be finding the R/3 Connections... U have to choose that...
if u are in SAP ECC , then u will be finding the ABAP connections.. U need to choose that and create the RFC connection.....
But U need to know the details :
1. Target Host Name .
2. System Number.
3. Logon details...
Reward Points if useful
Raghunath.S
9986076729

RFC connection between two SAP systems (with SAP router)

Hi!
I would like to set up a RFC-connection from SAP Solution Manager to other SAP system.
The network connection between the servers is VPN.
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
my server --> customer
my server --> internal SAP Router server xy (10.101....) --> SAP Router customer 2 (10.1....) --> SAP System customer (134....)
Back-way
SAP Systeme customer --> SAP Router customer (134.1....) --> internal SAP router (212.6....) --> my server
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
something like:
/H/10.101..../S/sapdp99/H/10.1.4..../S/sapdp99/H/134...
Thank you very much!
regards
Thom

Same answer as in the other forum where you cross posted....

Taking the data from interactive forms and load the data into SAP system?

hi all,
I want to know how to take the data from interactive forms and load the data into sap system?
if u have any sample scenario, explain with that.
thanks in advance
Raja

Hello,
Check the program...
SAPBC480_DEMO.
Check the below threads
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/88e7ea34-0501-0010-95b0-ed14cfbeb85a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bfbcd790-0201-0010-679d-e36a3c6b89fa
Thanks
Seshu

DB Copy (MSSQL) between two SAP systems with different level and Components

Hi,
we have a SAP system release mysap 2004 SR1 and for "the upgrade project to SAP ECC 6.0 " we installed a new mysap 2004 in a new hardware (sap03) where we have also solution manager running. The new installed Mysap 2004 SR1 is alos running fine in the new hardware.
Now we would like to do DB copy from the old system (sap02) to the the new system sap03 and then we will do the upgrade to SAP ECC 6.0.
After I compared the two systems I have following questions:
1) there are 4 Software Components which are not in the new system (sap03). This are:
PI
FIN_BLERP
BP_INSTRASS
Is this necesary for the DB copy or we do not need this to be able to do the DB copy?
2) The Software Components Level is not the same. Should we have the same level to do the DB Copy?
Thanks in advance
Best regards
HanseAtik

Hi Juan, hi Clas,
just to be clear and to not stuck on the the way:
The systems are as follow:
1) the source system:
                     - Windows Server 2003,
                     - MSSQL Server 2005 with 32 bit.
                     - Mysap 2004 SR1
2) Target system:
                   - Windows Server 2003
                   - MSSQL Server 2005, with 64 bit.
                   - Mysap 2004 SR1 (with less Support package level and no PI, FIN_Basis, BP_BLERP and BP_INTASS coponents)
I hope this will work. could you post the link the DB Copy guide we are talking about?
By this way we will be sure that we are talking about the same DB Copy. Otherwise any mistake in this step will cost more work and time.
Thanks in advance
Best regards
HanseAtik

Http communication with non-sap system

Hi ,
We have a requirement to send OM related data to a non-sap system using HTTP post in XML format and receive the response from that external system. We are on ECC 6.0 and we cannot use XI at this time.
What would be the correct approach to do this? I read that we could use ICM for HTTP communication am I on the right track?
Thanks

Hi ,
We have similar type of requirement, if you have the solution then let me know .
Thanks in adv
Vishnu

Non-XI HTTP Communication with non-sap system

Hi ,
We have a requirement to send OM related data to a non-sap system using HTTP post in XML format and receive the response from that external system. We are on ECC 6.0 and we cannot use XI at this time.
What would be the correct approach to do this? I read that we could use ICM for HTTP communication am I on the right track?
Thanks

What setup do we need for this ?
We are on ECC 6.0. I am trying to run the program, I am getting http_communication_failure = 1 in the receive function.
I am not sure if I am missing any authorizations/setup.
Thanks for your help.
VV

HOW TO SEND THE REPORTS AND THROUGH XI TO NON -SAP SYSTEM

Hi Experts,
I want to know how to send the reports and smartform through xi to another system. All the post blogs are just explaning only about the FILE-TO-FILE, FILE-TO-IDOCS scenarios only.

Hi,
XI is the middleware that to be used to transfer the data between various systems and even you could design the Business Processes with it.
In R/3 the smartforms, are generally converted to PDF and then have to send it across to Non SAP systems. Similarly you can convert the smartforms to pdf format and keep it on application server. XI will pick up that pdf and will send it to Non SAP system either as mail or as an attachments.
ABAP reports are normally used to re-present the data. If you need to transfer this data across the Non SAP systems then you have the IDOCs to be generated, RFC or ABAP Proxy to integrate this data with Non SAP system.
XI is not restricted only upto file to file or file to IDOC scenarios. It have enormous capabilities to involve various Business Processes as well integrate various SAP or Non SAP systems.
If need anymore specific details, please let us know.
Thanks
Swarup

Sending e-mails between different SAP-Systems with SMTP

Hello,
I want to send e-mails between two different internal SAP-Systems. I already configured SMTP in both systems but ist not possible to send an e-mail from system A to system B. I've got following error message:
Cannot process message; no node determined for <sapuser>:
Thanks in advance & best regards,
Christoph

Hi Christoph,
but it is possible that the email for user from System B is also available in the system itself(transaction so01) and not only in his outlook inbox?
As the email is sent from System A. It will be available under SOST of system A.
As user in System B is receiving the email, it will be appearing in users inbox.
Check with Mail server administrator on where to enable SMTP relaying for IP address of SAP server.
Hope this helps.
Regards,
Deepak Kori

IDOC between 2 sap system

Hi,
I need to send Idoc from SAP system(A) to SAP system(B).
In system B i need to store data in custom table.
Correct me for below settings
in system A
1) define RFC that point to system B
2) define port in WE21 that point to above rfc
3) maintain partner profile for outbound idoc in Logical system in WE20
4) trigger IDOC
Now IDOC is sent to system B
In system B
1) maintain receiver port in IDX2 that has system A clinet and RFC pointing to system A
2) maintain inbound partner profile for the same idoc with a Z process code.
write code inside Z process code to save data in custom table.
Now i am not able to Z process code as it says ALE settings not maintained. i created new FM ...assigned it to a z proces code in WE42.
what other steps should i do.
Also my other doubt is if another user maintains for the same message type another process code will 2 idocs get generated in system B whenever i trigger idoc from system A..which i dont wont to happen...is there a way to stop it.

Hi,
It seems that your ALE configuration is not done properly. Check your logical system setting with both System A and System B. then RFC destination with Tcode SM59. After that you go ahead with your logic and Z program. it will work.
As you ask you dont want others data then you shoul check with your function consultant that they use there data and if data is no longer useful you remove that one eith block that one.
Regds,
Rakesh

ZGPGL - Copying Accounts and Cost Centers to the SAP system

Hi all,
When I try to copy accounts and cost centers from my excel mapping document to the SAP system I can only copy about 20 of them at a time. I have about 30,000 accounts and am wondering if there is a quicker way to do this.
Thanks,
Deki

Write a catt script to create the GL account and cost center master data. they are relativley easy to learn and create. They work great for this. I have used them several times for that purpose.
pls assign points to say thanks.

Calling Web Services between two SAP systems.

Hi Experts,
I am trying to trigger a web service created in one of the SAP system from a different R/3 system through WDA.
Kindly help me out on what are the configurations to be done like linking two systems (do i require this?) etc..
I have successfully obtained the WSDL file, but could not use it in my second system. It says , it encountered an error. I wonder if i am required to do any configurations.
All suggestions are welcome.
Thanks and Regards,
Anto.

Hi Antony,
By Proxy Object, I meant Class to consume WebService in your second system.
Lemme summarize, what you have done and lemme know where I am wrong.
System A.
You exposed an RFC enabled Func Module or BAPI as a webservice.
After this you have checked it using WSADMIN, and you have tested this as well.
And finally you saved the WSDL file of this Web Service.
System B.
you create a Proxy Object as specified in the link I provided.
you create the RFC destination n did the Logical Port Configuration as per that link.
Now you can use this proxy class any where , in any abap code.
you can use this in WDA as well.
But before doing so, I would suggest to write a test report as suggested in the link and test if your webservice is working fine.
Now please tell me where did you do the things differently.
Regards
Pushkar

Communication between mobile browser and proxy server

hi
I am trying to connect to internet in mobile through my proxy server.I wrote codings for that.Using my code i am able to get the request from the mobile browser but the problem is i am unable to connect to the proxy server
The following is my code for sending the request to the proxyserver and getting back the response:
s = (SocketConnection)Connector.open("socket://"+hostname+":"+port);
/*OutStream to write the request to the proxy server*/
OutputStream out = s.openOutputStream(); PrintStream outw = new PrintStream(out); outw.print(requestHeader +"\r\n"); /*Inputstream to read the response from the proxy server*/ InputStream in = s.openInputStream();
/*writing the response in the browser */
byte[] buffer = new byte[1024];
int len;
while((len = in.read(buffer)) > 0) {
os.write(buffer, 0, len);
is my coding correct?or i need to change anything in my codings?
This coding is working fine in emulator and displaying the correct output in the desktop browser.but in mobile it is not working?
Thanks a lot

hi
yes nothing is returned from the browser
request from the browser means
whenever u type say,www.google.co.in in your browser
the following type of request will go to the proxy server,after getting the request the proxy server will check for the host address and then it connects to the webserver and get the response and send it back to the browser.
for google page the request is
GET http://www.google.co.in/ HTTP/1.1
Host: www.google.co.in
Accept: text/html, application/vnd.wap.xhtml+xml, application/xhtml+xml, text/css, multipart/mixed, text/vnd.wap.wml, application/vnd.wap.wmlc, application/vnd.wap.wmlscriptc, application/java-archive, application/java, application/x-java-archive, text/vnd.sun.j2me.app-descriptor, application/vnd.met.ticket, application/x-wallet-appl.user-data-provision, application/vnd.oma.drm.message, application/vnd.oma.drm.content, application/vnd.wap.mms-message, application/vnd.wap.sic, text/x-co-desc, application/vnd.oma.dd+xml, */*
Accept-Charset: iso-8859-1, utf-8, iso-10646-ucs-2; q=0.6
Accept-Encoding: gzip,deflate,identity;q=0.9
Accept-Language: en
Cookie: PREF=ID=dc8dc6e63dab6e09:TM=1156324791:LM=1156324791:S=FgovcdMV93Mm4Li7
Cookie2: $Version="1"
User-Agent: Nokia6630/4.06.0 Series60/2.6 Profile/MIDP-2.0 Configuration/CLDC-1.1
x-wap-profile: "http://nds1.nds.nokia.com/uaprof/N6630r100.xml"
in the code u have given the value of the host is http: only

To and fro communication between mobile & sap system

Similar Messages

Maybe you are looking for