To Apple engineers: Home sharing and wifi sync not working after fresh install

Have been using wifi sync and home sharing on my Macbook 5,1 since its early debut.
Since Macbook 5,1 is old i am using it to stream MP4 files to my Apple TV.
The functionality has been working fine throughout the OSX iterations; then came Mavericks.
Now my iTunes library will not sync with Apple TV3, nor will my iPhone 5/iPad 3 wirelessly sync with my iTunes library.
For some reason since upgrading to Mavericks the thing wont work under normal boot.
Restarting in Safe mode solves the problem. Assuming it was some erroneous configuration i went through troubleshooting steps to try and resolve it.
First i uninstalled any third party apps.
Then i repaired, went through Maintenance and Cleaning of the system using Onyx
Then i tried manually removing third party boot kexts from the System Library and user Library
Then i tried reinstalling OSX via the recovery partition (cmd+r on boot time)
Finally i tried a full system erase and reinstall via an external bootable Mavericks USB.
After all these steps the problem persists.
There should be no hardware failure since it works fine in Safe mode and doing a clean install verifies that there are no third party conflicts with the system since iTunes was executed immediately after booting up for the first time.
This raises the concern that there seems to be some sort of system kext misconfiguration by the Apple engineers.
When executing iTunes the following errors are being displayed in the system log (via Console):
22/07/14 20:09:41,949 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 1
22/07/14 20:09:41,954 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 2
22/07/14 20:09:41,958 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 3
22/07/14 20:09:41,962 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 4
22/07/14 20:09:41,966 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 6
22/07/14 20:09:41,970 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 7
22/07/14 20:09:41,974 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 8
22/07/14 20:09:41,978 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 9
22/07/14 20:09:41,982 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 10
22/07/14 20:09:41,987 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 11
22/07/14 20:09:41,991 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 12
22/07/14 20:09:41,995 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 13
22/07/14 20:09:41,999 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 14
22/07/14 20:09:42,004 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 15
22/07/14 20:09:42,008 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 16
22/07/14 20:09:42,012 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 17
22/07/14 20:09:42,016 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 18
22/07/14 20:09:42,020 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 19
22/07/14 20:09:42,024 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 20
22/07/14 20:09:42,028 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 21
22/07/14 20:09:42,032 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 22
22/07/14 20:09:42,036 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 23
22/07/14 20:09:42,041 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 24
22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91A980CD60 Christophoross-MacBook.local. (AAAA) that's already in the list
22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91A980D1F0 2.0.6.6.4.5.E.F.F.F.2.1.3.2.2.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91AA016F60 Christophoross-MacBook.local. (Addr) that's already in the list
22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91AA0173F0 5.1.168.192.in-addr.arpa. (PTR) that's already in the list
22/07/14 20:09:43,088 com.apple.usbmuxd[42]: LOCKDOWN_V2_BONJOUR_SERVICE_NAME is _apple-mobdev2._tcp,921707f2
22/07/14 20:09:43,140 xpcd[196]: restored permissions (100600 -> 100700) on /Users/christophoros/Library/Containers/com.apple.MediaLibraryService/Container.plist
22/07/14 20:09:43,466 com.apple.SecurityServer[14]: Session 100020 created
I hope someone came across a similar issue and has some light to shed on the matter.
This has been ongoing since Mavericks came out.
Thanks for reading through

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own"

Similar Messages

  • ITunes WiFi sync not working after Lion reinstall

    Hello all,
    Here is the situation. Wifi syncing was working superbly well for both my iPhone and my iPad. They could be upstairs while I was downstairs in my office and I would see them both in iTunes and could sync them at will. Great stuff!
    Until yesterday. I bought a new hard drive for my Macbook Pro, installed Lion on it and imported all of my apps and settings on it. Everythings works fine EXCEPT for wifi syncing. When I plug my devices to the USB cable I see them appear in the iTunes sidebar but I soon as I disconnect them, POOF! They're gone!
    The checkbox IS checked. I tried unchecking it, syncing via USB, rechecking it an resyncing to no avail. I just can't get the darned thing to work again!
    Both devices and the laptop have been restarted multiple times.
    Any ideas?
    Thanks!

    Can't believe it was so simple.
    I just restarted my Mac and everything came back to normal.
    Ok then sorry for the disturbance, move along, nothing to see here.

  • Wifi sync not working after ios6

    I have upgraded all my devices to latest ios6 and now wifi sync does not work. I have 2 devices syncing to windows Xp laptop which are not syncing. I also have an additional iPad syncing to my iMac. None of them are working as of late. Tried rebooting everything and wifi sync is intermittent at best. Bottom line, seems like an ios6 problem, but not finding a lot of help. Any suggestions?

    Ironically, updating to iOS 6.0.1, at least for now - seems to have made WiFi sync more reliable for me on my iPad 3, and my MacBook running OS X 10.7.4 and the latest version of iTunes.
    if you have quit iTunes, rebooted your devices and restarted the computers and that didn't help, this is what I would suggest next ... And in no particular order.
    Turn WiFi off on your iPad, restart it and then turn WiFi on again.
    Try rebooting your router. Even though you may have Internet connectivity with all devices, rebooting the router might just work anyway.
    Connect the iPad to your computer and launch iTunes, select the iPad under devices, click on the Summary Tab and uncheck Sync this iPad over WiFi. Click on Apply in the lower right corner. Sync your iPad. After the sync completes, go back to the Summary Tab. Click on Sync this iPad over WiFi. Click on Apply and wait for the changes to be applied. Quit iTunes and disconnect the iPad.
    Restart your computer, launc iTunes again and see if it works now,

  • Home sharing and air play not working with 11.1.1.11

    I upgraded to recent i Tunes and now I cannot access Airplay or Home Sharing
    help

    Hi there neztrop,
    You may find the troubleshooting steps in the articles below helpful.
    Troubleshooting Home Sharing
    http://support.apple.com/kb/TS2972
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS5209
    -Griff W. 

  • Anyone notice Powerpoint, Word and Excel do not work after Lion install?  Is there a work around?

    I just upgraded to Lion.  Now when I try to open Word, Powerpoint or Excel I get an error which says: You can't open the applicatoin Microsoft Excel because Power PC appliactions are no longer supported.
    Has anyone seen this?  Is my software too old or do I need another software upgrade?
    Thank you

    You software is too old. You need to move to Office 2008, 2011 or use iWork or use Open Office (or Libre Office, or NeoOffice, etc.)

  • Wifi Sync not working on iOS 6 and iTunes 10.7 with iPhone 4S

    I am running Windows 7 64-bit but WiFi Sync is not working on either my iPhone 4S or my wife's iPhone 4S.  Worked fine before upgrading.  All settings look correct in iTunes 10.7 and on our iPhones 4S's.  Already tried uninstalling iTunes and all associated Apple programs (Bonjour, Apple Mobile Device Support, Apple Application Support, etc) and reinstalling iTunes but no help.  Temporarily disabling Norton Firewall did not help.  If I hook up either of our two 4S phones via USB wire, they Sync and Backup fine.  Just WiFi Sync not working.  Can't initiate sync from iPhones because button is ghosted stating it is waiting for PC to be present.  Phones don't show up under Devices in iTunes unless hard-wired via USB cable.  Any suggestions?

    I am getting sync issues too (although on OSX) - seems like others are getting issues too:
    https://discussions.apple.com/message/19834721#19834721
    Good luck,
    Chris

  • HT201412 my ipod 4G power button and volume button not working after updated to ios6. i also experience wifi issue. so deppresing!

    my ipod 4G power button and volume button not working after updated to ios6.
    i also experience wifi issue. my ipod can't detect any wifi signal.
    so deppresing!
    what should i do?
    i can't put my ipod to sleep, can't adjust volume, can't shut off.
    should i update to ios 6.1?
    HELP

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    When iOS 6.1 comes out I would update.

  • My iMessage and facetime is not working after updating to ios 7... My ipad works perfectly and it's the same apple id.  Any answers or reasons why on the iPhone 5 is not working???

    My iMessage and facetime is not working after updating to ios 7...
    Any answers on how to fix it?  I've tried to restart, restore connected to itunes, but nothing.

    ACTIVATING FACETIME AND IMESSAGES
    Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS.  Check with your carrier to see if your plan supports sending of international SMS messages.  If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)).  Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation.  If that does not fix things read the following articles:
    http://support.apple.com/kb/TS4268
    http://support.apple.com/kb/ts3367

  • IPhone 4s: Slide wifi is not selectable. Always gray and wifi does not work!

    i have Slide wifi is not selectable iPhone 4s. Always gray and wifi does not work.
    Help me!

    You most likely have a failure of the WiFi chip.
    Restore the phone as a new device.  If that doesn't solve your problem, you'll have to bring your phone to Apple for replacement.  If you are not within the warranty period, expect to pay $199 for out of warranty replacement.

  • Hi I have iphone 4s and my Bluetooth and wifi do not work. it was working before and I did not do any update for IOS or anything but it just happened. what I should I do to resolve this?

    Hi I have iphone 4s and my Bluetooth and wifi do not work. it was working before and I did not do any update for IOS or anything but it just happened. what I should I do to resolve this?

    Hae you tried to do a hard reset of your phone? This will not lose any data. Hold the sleep/wake button and the home button until the phone turns off ignoring any slide to power off messages. Then power the phone back on.

  • My celldata and wifi is not working

    my celldata and wifi is not working.

    See General phone and connectivity issues in this Apple doc:
    iPhone: Hardware troubleshooting

  • Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?

    I hope the title is enough info, please ask. In the mean time I have created an applescript to open preferences/ sharing and uncheck then check the file sharing box. This works but I would obviously prefer it just work normally. I have no corrupt preference files. Perhaps a file is missing? Thank you.

    Greetings Kwnez
    I'm not up to your level of expertise yet. I'm networking and file sharing too, on my Mac Powerbook 1.33 GHz PowerPC G4; OS 10.5.8 Lepoard. At the public library I found by asking the clerk a book Authored by David Pogue. "Mac OS X Leopard the Missing Manual". It (the book) has helped me ask better questions. I'm not saying that your question "
    Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?
    is hard for me to understand, I went to system preferences and looked at the sharing box. when I clik it it opens up and the first thing I see is my computers name, and under that i see, " Computers on your local network can access your computer at: ...-powerbook-g4-15.local"
    What I'm saying is "Are we on the same Page"

  • Security and privacy system preferences not working after Lion install.  What to do?

    Security and privacy system preference not working after Lion install.  Not sure if it happen with Lion installer or after updating. What to do?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • My Wifi is not working after re setting the net work also

    My Wifi is not working after re setting the network also.

    Read here:
    http://support.apple.com/kb/ts1559
    If nothing helps, make an appointment at any Apple store.

  • HT1414 wifi will not work after restore

    wifi will not work after restore

    Se emy response to your other post
    https://discussions.apple.com/thread/4862098?tstart=0

Maybe you are looking for

  • I purchased two songs and can't play them

    I purchased two songs on iTunes from the same album but when I try to play them, I get an error message that says, "This computer is already associated with an Apple ID. You can download past purchases on this computer with just one Apple ID every 90

  • Unable to install raw update 5.7 for cs4

    Raw Update 5.7 for cs4 will not install. Will stop in the middle of install and ask to close Bridge when it is not open. OS vista. Thanks to anyone that can help.

  • 2007 macbook or new ipad?

    ok it has come down to two products. a new ipad 2 32 gb wifi or a used 2007 2.0GHZ macbook with leopard that is running very well. by the way we have a family desktop but to many people are on that all the time (my dad is a teacher so he does a lot o

  • IPad 1: Failed sync then it turned itself off/can't switch back on

    I tried to sync my iPad 1 in iTunes but got a message saying it wasn't possible (I've synced on this computer many times before and my iPad was working fine before). Then my iPad turned itself off.  I've tried charging etc but can't turn it back on.

  • Create Table Problem

    I am creating a datbase interface using Java and there is this error when I try this SQL Statement: CREATE TABLE [IF NOT EXISTS] 06_2008_Running_Log it throws this error: com.mysql.jdbc.exceptions.MySQLSyntaxErrorExceptio n: You have an error in your