To avaid label print out in 103 Movement type

Hi,
How to avaid the Label Print out in during GR with 103 Movement Type.
Thanks
Duraisamy

Hi,
Use t.code: OMJJ,enter 103 movement type  and keep  BLANK which stand for No Document Printout  in the field of Print item   in the Entry Control segment and save.
Regards,
Biju K        

Similar Messages

  • 103 Movement type GRN

    Hai Experts,
    I have one issue.
    I will explain my secenario please guide me if i am doing wrong...
    I used receive Solvent GRN, For this solvent first Quality person has to approve the material, then only material will be unloaded, utill & unless unload the material, we don't know received Quantity. With out GRN ( inspection lot in system ) QC person will not analysis the material.
    For this my idea...
    For 103 Movement type i have activated Quality... The movement i raise the GRN with 103 Movement type, system will create inspection lot number... So quality person will come & do the analysis with refference to this document.
    Then for 105 movement type i have deactivated QM...
    Here i have got one problem is... for 103 movement type system is not generating batch number... with out batch number quality person is not available give UD...
    So please guide what configuration i have to for getting batch number with 103 Movement type.... in Create of batch... for 103.... automatic batch activated...
    Please please please guide me ......

    Hi,
    I think batch will not be created for 103 movement type becuase 103 is GR blocked stock. This is conditional acceptance of material. There are no accounting entries for this movement.
    You can map your requirement without 103 & batch combinaton.
    Batch managment should be activated and material should be Batch Managed.
    Process would be
    1. Receive material with 103. Here you need to post the quantity in Delivery challan.
    2. QA / QC person should check the material in lying in GR blocked stock.
    3. He / she will come and check the quality of the material and give OK for unloading the material.
    4. After unloading the materal, you will get the correct quantity of the material.
    5. Do 105 for the material. You will get batch no field in this time.
    6. Material will come in stock with Batch.
    The above scenario is when you accept OR reject the full quantity of the material sent by supplier.
    If you wish to receive partial quantity, then do 105 for the approved quantity. But this will not be possible in case of liquids.
    Let me know your views.
    Anand.

  • Sap notes for 103 movement type and 105 movement types in sap

    Hi all,
    Please let me know if there are any sap notes for 103 movement type and 105 movement type in sap as soon as possible
    points will be awarded.
    thanking u in advance,
    srinivas.

    There are many SAP notes related to these movement types e.g 514609,750836,
    533833, 808029, 317823,etc.
    You can search them at http://service.sap.com
    Regards,
    Amit

  • Inspection Lot creation for the 103 movement type

    <<Don't ask for or offer points>>
    Dear Experts,
    we have the requirement of Creating the Inspection lot for the 103 movement type. we have done all the necessary settings for 103 movement type (in OMJJ and under the node   Quality Management --> Quality Inspection -->Inspection Lot Creation -->Inspection for Goods Movements) but still I am unable to achieve the results. Same is happening for 105 movements.
    Kindly let us know what settings need to be done in order to achieve the same.
    Full points will be awarded for the reply
    Regards.
    Edited by: Matt on Sep 18, 2011 4:44 PM

    Hi,
    If you have activated two inspection types (eg 01, 0101) of same inspection lot origin (01), in material master you should  have a preferred indicator set for the inspection type for which you want to be selected when you perform goods receipt.
    This check box is available in the inspection type set up in the Material master.
    Also check whether the post to inspection stock indicator is set for the material (in the inspection type), then only material will be posted to inspection stock.
    Please confirm, what happens to the stock after making MIGO. check in MMBE and confirm
    Go through the link and maintain the necessary settings. I think default settings for 01 type should work.
    http://help.sap.com/saphelp_470/helpdata/en/2d/350e4d448c11d189420000e829fbbd/content.htm
    Regards
    Hari

  • 103 movement type not getting extracted

    HI Gurus,
    103 movement type is not getting extracted in 2lis_03_bf.
    Do we need to do any config/code for this ??
    Regards,
    Sunita

    hi,
    Your specific error and resolutiobn is explained in
    SAP Note 827178 - 2LIS_03_BF/_UM: Individual documents not extracted
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=827178
    we had done the changes mentioned in the above note and resolved the issue in our system.
    regards,
    Arvind.

  • Label Print Out

    I developed a label to print on Zebra printer. It is printed fine in development but the label is not getting printed in production environment. Printer is setup correctly. Output type is trigered I can see in NAST table and in spool it is showing completed but it is not getting printed,
    What can be the issue?
    Any suggestions please.
    Thanks,
    AP

    hi,
    if spool shows correct,
    check with the printer preferences,  by comparing both development side printer preferences and the production side printer preferences whether the same type of printer is using there or not, mostly the settings will cause the difference..

  • Transfer Order in WM with 103 Movement type In IM

    Please sugget me ,whether it can be possible to Create TO for movment type 103 .? Please suggest me the steps.

    Dear Karthik,
    Here i a following the standard flow
    1.MIGO with 101 in Storage location.
    2.TO generation .
    3.TO confirmation in desired BIN.
    But after 1st step the stock is present in storage location ,then from there only it will be available for sales in System , but i want to make it available after Putaway beacuse of WM.
    Also i dont want the imidiate confirmation of TO .I want it seperately to do.
    Please suggest me.
    Edited by: harshad81 on Aug 10, 2011 12:46 PM

  • No need label printout for 103 movement

    Hi Experts
    I have experinced some error while using 103 movement.Please below I have furnished details fo error.
    User gets error when ever using 103 (Material post to block stock) movement, which is also queuing in the label print out without printing, when ever using 105 movement for label printout that time gives a problem with unprinted label print outs for 103 movement, user does not want label printout for the movement type 103. Now  workaround is currently local help desk  is deleting the unwanted printouts from queuing and taking the required printouts.
    Please give your valuable resolution for the same.
    Thanks & Regards
    J.Jeyakumar

    hi,
    try using user exit for MIGO
    MBCF0002            Customer function exit: Segment text in material doc. item
    MBCF0005            Material document item for goods receipt/issue slip      
    MBCF0006            Customer function for WBS element                        
    MBCF0007            Customer function exit: Updating a reservation           
    MBCF0009            Filling the storage location field                       
    MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MBCF0011            Read from RESB and RKPF for print list in  MB26          
    MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc.
    thanks

  • Print out -- MB90

    Hi Frnds,
      I want to take standard Print out of 101 Movement types through MB90 Tcode.
    For that i have to some out put configuration -- where and how to do that out put control settings.
    Regards
    Rakesh

    Hi,
    As your posting a GR, you need to maintain the settings in :
    SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt Documents
    for 101 movement as 1.
    Also quickly check following points
    1. In OMBR indicate the printer name as LOCL,Item print indicator as 1,Print version-2
    2. In M706 ,mantain output types for WE01/02/03 (as requiired),Also check the default value ,dispatch time-3/4,Tr medium-1 ,print parametr-7..here prefarable output type is WE03
    3.In OMJ3 mantain output device for all the plants
    4.in MN21 for output type WE,mantain print version-3 ,print item as 1.
    Than in MIGO check the print check box and than going to MB90 get the document number and execute for getting print out.
    Hope it helps.

  • Label printing issue with chinese characters (SAP script)

    Hi ,
    I have a requirement to print chinese characters on label print out.
    Here are the steps already tried:
    1) Created a new device type which is copy if ASCIIPRI and character set 8400
    2) Font ANDALE_S, CNHEI, CNSONG are assigned to device type, same fonts called in SAP script.
    3) During the print, it is picking ANDALE_S font(observed in spool RAW data), but preview is good.
    4) I put ZPL codes CW1,B:MSUNG.FNTFS in beginning of script and also ^A@N,50,50,B:MSUNG.FNT while prining actual chinese text in SAP script.
    5) also tried other device types assigned to printer LZEBU2, LB_ZEB2 etc.,
    6) already checked at printer DIMM level, SIMSUN, ANDALE_S fonts are already installed
    7) Character set on printer is same as in SAP
    So far no option worked, it default to Courier fonts while printing and it results garbage characters.
    If anyone has ideas, please advice.
    thank you,
    Anil

    Hi,,
    If the ZPL commands are correct for switching to the printer's internal CHinese font and character set, it may work to add the fonts via SE73 -> Printer Fonts -> ASCIIPRI . In here you need to add the commands in the print control SFxxx for your created font.
    Another possibility is to print via windows and device type CNSAPWIN. Here it should not be necessary to add any font.
    Regards,
    Aidan

  • Print indicator assigned to the MM movement type 101 F ( GR for Production Order )

    Hello!
    I'd like to know how to assign a print indicator to the movement type GR for Production Order 101_F
    When I use the IMG path : Material management/ Inventory Management and Physical Inventory/ Print Control/ Maintain Print Indicator for Goods Receipt Document, I can only assign the movement type 101 (Goods receipt) but not the movement 101_F.
    Thank you for your help!
    Charlotte

    Hello Dev!
    The movement 101 F is Goods Receipt for Production Order. The letter "F" corresponds to the movement indicator.
    I'd like to dissociate the movements types 101 and 101_F to have only one printed label.
    Regards,
    Charlotte

  • Contacts does not print out in alphabetical order

    Has something happened to printing lists from Contacts? Don't know if it is Contacts or Mountain Lion.
    I have not printed a listin in ML before, but in former versions, an alphabetical listing was generated in alpha order. Now printing a list gives the names out of alpha order. This is the case of a group or All Contacts. This is not just my machine, but another computer in the house running the lastest software.
    I find nothing in the printing details to select alpha order. The Contacts is set up to view in last name-first name order.
    I also checked all boxes in atributes to see if there was a strange happening there, but the sorted order is identical. It is not sorting by first name either.
    Contact preferences is at show first name before last name andsort by last name. I have changed those parameters and there is no effect of the order of names in printing.
    Pocket address book prints in alpha order. Mailing labels prints out of order and left off some of the first of the listing. Listing all contacts is also out of order.

    Ocalamarilyn ....You are a genius!!!!!  Finally I was able to print the complete contact's book alphabetically....  I've been trying to figure that one out since I installed Mountain Lion!!!!........ of course you can only print a list this way but it doesn't matter with lables or envelopes cause they don't have to be in any sort of order.  You don't get a chance to select the items you want to show but who cares for now.  thank you, thank you thank you.....  I hope everyone who has written to this feed sees your reply.....  You made my day!!!!!  by the way, do you live in Fl cause I'm in Summerfield.

  • GR Label Print

    Hi,
    This is on GR Label Print at IM Level.
    We have a requirment that for Cost center / Asset the GR Label should not be printed but the Sales Order specific Purchase to be printed after doing MIGO (Movement type 101)
    Is there any way we can control at configuration Level rather than the Smartform Level?
    Tried to use OMJ4 but could note restrict specific to Cost center K or Asset A
    Regards,
    Vengat

    Hi Vengat,
    As i know there is no standard availability for this.Develop a custom for that .Ask you technical team to develop a transaction for  that with required selection criteria.This will be easy to do.Check this and post if need help.
    Regards,
    Madhu.

  • Transfer Request for the movement type 103

    Dear Experts,
    We are creating Batch and we are receiving the batches against movment typ 101. in the sane time material is comming to WM through 103 movement type.
    Against 103 mov. type one TR will create. but in our case while doing stock transfer from storage type  901 [GR for Production] to 001[FG Stock] we are directly using LT10 transaction, If we do the stock trasfer here it will not ask TR No againt which TO has to be cleared.
    Now I have observed in LB11 [TR display] since last year all TR are appearing in the list. Is there any harm in our process since we have not done TO against TR.
    Please suggest how to come out from this situation.
    Thanks in Adavance.

    Old TRs won't cause any problem. You can eliminate them in LB02 > (menu) > Edit > Set Final Delivery.
    If you want to eliminate TR creation for GR, you have to carry out you settings in SPRO > LE > WM > Interfaces > IM > Define Movement Types - here choose LE-WM interface and remove the TR creation indicator from V_T321-TBFKZ of the relevant WM-mvt record.
    However, if you have TR and process it to get the TO, you can manually modify the suggestion given by SAP's search strategy. In this case you could use TR insted of manual LT10 process.
    Regards,
    Csaba

  • Print code to Movement type

    Hello All
    For Movement type 101 we used to print transfer Order - Print code 1 . Now are going to start Label printing as well print code -Z1 . As we can assign only one print code to perticular movement type we are not able to Print Tranfer Order . Is there any way to print both Tranfer order and Label both .
    Many thanks for help in Advance

    Hello All
    Thanks for feedback, But I have already done all these . Problem is even after assigning Label Form Name , I am not able to Print Labels .
    OMLV - for Print code i have assign both TO form and Label Form .
    and that print code assign to Movement Type 101 .
    Is there any specific setting which i am missing .
    Most important thing is when i assign either TO form or Label Form one of those it work , i mean it print automatically , but when i assign both it print only TO form and Not Label .
    Many Thanks for coming back regarding the same .

Maybe you are looking for