'To Be Delivered' status in DAE; Issue with DAE?

Hi,
We have Decetral Adapter Engine (DAE) in DMZ. When we use DAE to drop file using receiver file/FTP adapter, we see all the messages are in "To Be Delivered" status.
Sender file/FTP adapter is able to pick the file succssfully from the same location.
Audit log has the following status:
Success Message successfully received by messaging system. Profile: XI URL: http://sapxaqv:52100/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
Success Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
Success Message successfully put into the queue.
We tried to change all the parameters in receiver CC, still the same status as 'to be delivered' even after giving few wrong parameters to test (gave worng password didn't detect it). Looks like it doesn't going beyond the queue to process.
Thanks for your help in advance.
Thank You,
Indrasena Janga

Hi,
Generally "to be delivered" status messages cannot be changed to any other status directly except by taking the restart of messaging service in the Visual Admin.
Goto Visual Admin --> AF (Adapter Framework) services and take a restart of this particular service.
J2ee Restarts sometimes helps but this aint a recommended or feasible option.
Up gradation to SPS18 would be helpful to avoid restarts.
Cheers
Dhwani

Similar Messages

Issue with PI messages in "To be Delivered" Status

Hello Experts,
We have a Mail to SOAP scenario on PO 7.4 single stack PI system. Currently we are facing issue with messages where messagess are in status "To be Delivered". Messages dont get processed further.
Two days back, we had issue with file system table overflow and this cause messages remained in "Delivering" status. I can see Audit log with error emssage for table space full.
I couldnt cancel/resend those messages.
I believed these messages are causing rest of the messages to go in "To be Delivered" status. I found few blogs to check resources in Java Engine Additional Data->Queues and its looks good.
we had system restart and these "Delivering" messages were cancelled but again when we tried a fresh run and first message went into "Delivering" Status with 500 server error message in audit log and subsequent messages started going into "To be Delivered" status. This is happening only for one scenario, rest of the message are working fine.
I tried wit new BS, Channel, Integrated scenario for same functioanlity but its not working.
Recent messages with "To be Delivered" can be seen with below audit log
Information MP: processing local module localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean
Information Mail: Calling the module processor for channel CC_Sender_V2
Information Mail: Message leaving the adapter (call)
Information Trying to put the message into the send queue
Information Application attempting to send an XI message asynchronously using connection AFW
Information Message successfully put into the queue
Information Trying to put the message into the send queue
Information Mail: Call completed
Information Message successfully put into the queue
Information The application sent the message asynchronously using connection AFW. Returning to application
Information Mail: Call returned for channel CC_Sender_V2
we have latest patch(SAP_XIESR Version 1000.1.70) applied 10 days back only
Kindly suggest.

Hi All,
Thanks for your reply and suggestions.
Now messages are flowing properly. Issue was with data population in the target structure. Receiver side we have Knowledge Management portal website and CreateDocument operation fields were expecting some values to be populated. We tried few combinations and it worked.
We also tried changing mapping and we could reproduce messages with "To be delivered" status.
Now we are searching for KM Portal Webservice documentation where information about every field of operation is mentioned. If we straight away pass source mailbody to webservice, its not working. failing at webservice end with error 500 internal server error. It expects data to be in Base64 format and also fields like Length of data to be populated. If we get documentation then things would be more easy. We are also passing attachment but its not getting generated at target end. We are not sure if webservice support that feature.
Thanks,
Vinit.

ISSUE WITH SERVICE PURCHASE ORDER STATUS

Hi
There is an issue with a Service PO.When I created a service p.o the
p.o value was 1,543,695.60 USD . I created service entry sheet and GR
for 1,029,130.40 USD.
The still to be delivered amount should be 1,543,695.60-1,029,130.40 =514565.20 USD
But the Amount Still to be delivered in p.o STATUS HEADER DATA screen shows 191,761.60 USD.
Actually the system should show the delivered status as 514565.20 USD.
What should be the cause for this???
I checked the invoice also.Invoicing is done for 1,029,130.40 USD.
Apperciate ur immediate feedback on this.

Hi
S012 is updated by the Purchase Order creation date, not the Goods Receipt date. e.g. a Purchase Order is created in January and good receipt is in February and March, S012 will shows the values in period January.
try Transaction MC26
Info structure S012 Update group (stats) SAP
Double click on Goods received qty
In the section Date field for period determination
check regarding date or change accordingly
hope it helps.

Anyone else having issues with location services since the 7.1 update? Ever since I updated i've been seeing the location services on my status bar at all times.

Anyone else having issues with location services since the 7.1 update? Ever since I updated i’ve been seeing the location services icon on my status bar at all times. I noticed that google was the app that was using it a lot, but after I turned the feature off for google my phone started using the “traffic”, “frequent locations” and “cell network search”. When I turn the feature off for all of those things it’s no longer a problem. So just wondering if anyone else is having this issue or if anyone has a solution?

The "solution" is probably to increase your knowledge. You've done good things. Perhaps this article will educate you a bit more about location services.
Basically, they can be very useful, but can cause a lot of iPhone use. A major example is "Remind me to ... when I leave home."
http://support.apple.com/kb/HT5594

EO Messages with Delivering Status in Adapter Engine

Hi All,
We have a scenario DB-DB Asy with Java Proxies. Proxies are there to accept the messages from Sender DB and insert in target DB. Get the response from target DB and insert back that to Sender DB.
Actually the scenario is Syn, but we made it as Asynchronous by implementing Java Proxies.
Now we are using EO mode in Sender JDBC channel. We have 17 interfaces in the similar pattern. We are using one common XI receiver channel for all these 17 interfaces.
If one message got struck, then rest other Proxies are not getting triggered and not able to resend the message ( ofcourse I know I cannot resend with Delivering Status). But not sure what causes the messages to failed with Delivering Status mode.
Any pointers would be highly appreciated.
Will increase of Parallel Queues really solve my problem? If it fails in Prod, its a big problem for us as we dont want to lose the data. Now everytime we are restarting the Message service server.
Regards,
Srinivas

Normally if there is any problem in target then you will see the adapter engine message as delivering
after the no of retires set then status will go to system error
during this entry check the CC used what is the error causing for that ?
HTH
Rajesh

Issue with Temse File status

Hi Expert,
We built an interface using PU12 and we have an issue with the TEMSE file created.
When we run the interface on background, the temse file has the status ''IS BEING WRITTEN'' instead of '' CLOSED'' and we are missing data on the file. The issue does not occurred on foreground.
Please help.
Thanks on advance.

Hi Khaled,
Do you still have the issue. If so, did you check the spool / steps of the background job. You may need to debug the subroutine close_dataset in the include program RPCIFM42.
If you have solved the issue, please post the cause and the solution so that other users can benefit.
Thanks & Regards.
Kiran
Edited by: Kiran NN on Jul 27, 2009 3:49 PM

I recently started using iPhone 4S. But I can't make messaging to anyone. It is updated to iOS 6. Everytime I send message, it shows me message is not delivered! Is it an issue with all iPhone 4S, iOS 6?? Help me! Thanks in advance !! :)

I recently started using iPhone 4S. But I can't make messaging to anyone. It is updated to iOS 6. Everytime I send message, it shows me message is not delivered! Is it an issue with all iPhone 4S, iOS 6?? Help me! Thanks in advance !!

Try resetting your phone by holding down the home and off button until the apple symbol comes up. Then if still doing, restore your phone in itunes from your backup.

Status issues with sales process

Hi Friends,
I have an issue with thrid party sales order processing
Step#1
My client runs the sales order for
Material Qty
p-100 10
p-101 10
p-102 10
step-2
Purchase requisition created and from vendor delivery happened
Step-3
My user created billing with reference of sales order for below material
Material quantity
p-100 20
p-101 10
p-102 20
step-4
user found mistake and he cancelled the invoice and created new billing document
for
material quantity
p-100 10
p-102 10
again he found mistake and cancelled this billing document and create one more billing document with reference of sales order
material quantity
p-100 10
p-101 10
p-102 10
now the issue is for p-100 and p-101 it showing being process and p-101 it showing status as completed
please suggest m

Just checking to see if anyone has re-produced any of these issues...
Thanks!
Jason Walters

Is anyone having issues with imessages disappearing or not being delivered?

Is anyone having issues with imessages disappearing or not being delivered?

I too am experiencing this on my iPhone 4 after upgrading to 4.3.3. I am fairly convinced that it is a software issue. The last update seems jumpy. There appear to be more pauses and stuttering with screen changes too. Sometime the button operates perfectely (even with repeated light touches). Other times, it doesn't matter how hard I press; it takes several presses. I notice it more when i am using a battery case or connected to an AT&T MicroCell. I am having a hard time pinpointing problematic apps, although i suspect that mail with my work Exchange account may be a culprit. I suggest posting your issues on Apple's iPhone feedback page, www.apple.com/feedback/iPhone.html, to ensure that they are looking into this problem. If it is a hardware issue, I'll be pretty upset as I received my iPhone 4 on day 1 of availability and it is out of warranty. Hoping for a fix with an update. Please post on the feedback page.

Battery Status issues with SL 10.6.1

I have a brand new macbook Pro 13inch. After getting the new update my battery life indicator hasnt been right since. It goes up in time then takes a chunk of time out. Then look at it might add it back then before you know it. Its running on reserve battery life. This is a big issue with the new upgrade. Is there any fix for this?

The "time remaining" displayed on the battery is your macs best guess of how much time you have left based on what you are doing with your mac at that moment in time. Say if you are running google earth, watching youtube and other CPU intensive tasks then the battery will show a significantly reduced time. However, when you are only word processing with the screen half lit then the time remaining will be a lot higher. Also note that switching back and forth between these scenarios will fluctuate your remaining time too. The best way to judge how quickly you are draining your battery is by looking at percent remaining.
Steve

Issues with iMessage when switching data carrier (wifi - cellular)

So I have had this issue with my 5S and now my 6+ in iMessage. Not *always* but often enough I've run into issues sending messages via iMessage when I associate with wifi in that they don't send. I'll get an error message saying "not delivered" and it will stack as many outgoing messages I try to send. However, if I force the first message to send as text, subsequent messages will go through afterwards without issue. If I go from wifi to cellular I have no issues whatsoever and when I have these issues on wifi, my data works fine (incoming emails, Facebook notifications, etc.). I used to run cellular data only because I had unlimited but now I have a cap so I intend on using wifi when possible...but to have to send my first message as a text just so I can use iMessage is annoying...

Hi there BigDogg795,
I would recommend taking a look at the troubleshooting steps for iMessage found in the article below.
iOS: Troubleshooting Messages - Apple Support
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
-Griff W.

Production Order Issue with Qty conflict

Hi Friends,
i have a issue with a production order fro which we built the product and the finished goods is moved to storage location, i have status set on my Production order as REL PRT CNF DLV PRC GMPS MACM SETC. My order was for 1unit,In the quantities window , total qty shows as 1 pc and delivered as nothing (blank). Its not active were physically i can change , so how do i add the deliverd qty field by 1.And what could be the issue? PLS help Points will be rewarded.

This Delivered field in CO02-Dates/Qtys tab will get updated automatically , when the order qty is delivered to stock.
We can not manually update that.
Have you checked whether the storage location stock has been increased ? In MMBE , you place the cursor on the stock qty and choose Environment - Production orders or Material Movements and check , whether a GR has been made against this order.
Regards,
Sheik

To Be delivered status in Message monitoring

Hi,
There are some messages in TO BE DELIVERED status in Message monitoring while selecting integration server. I could neither cancel nor resend.
any input reg. this will be appreciated.
I didn't see any messages with TO BE delivered status in adapater engine.
I could able to clear What ever messages in system error status in adapter engine by filtering based on sequential id.
I have seen this thread & link also.
To Be Delivered
Re: "To be delivered" status in RWB -- Any solution?
http://help.sap.com/saphelp_nw04/helpdata/EN/49/e3fb40ef74f823e10000000a155106/content.htm
I could not see any entry in SMQ1, SMQ2, SM58 also
Thanks
Praba
Edited by: Prabaharan Rangasamy on Dec 8, 2009 1:02 PM
Edited by: Prabaharan Rangasamy on Dec 8, 2009 1:04 PM

Hi,
You cannot resend or cancell the messages which are in status "To Be Delivered". Check Receiver adapter File/Jdbc/ OFTP e.t.c. which is processing these messages.
Check with your Basis team to remove the lock of adapters if any. Or to process these messages you require soft restart of Java stack.
I had same kind of issue two days back with OFTP adapter messages and did soft restart of java stack with help of Basis team.
Hope it will helps you
Cheers
Veera

Issue with HTML tags visible in Outlook emails

Hi everyone, I'm having an issue with a website I'm working on.
On our site, we have a page that generates emails after certain events occur. These are sent to a forwarding address on our mail server, which is then sent to several users on our mail server. These users have their accounts set up in Outlook (one in 2007,
one in Mac 2011).
We're are having an issue where these emails are displaying in Outlook with all of the HTML tags in the email visible. One of the users spoke to Microsoft support, and they remoted in and went through their Outlook settings and were not able to find any issues
there.
This issue is not global exactly. When one of the users added their email to their iPhone, the email displayed correctly. We added a Gmail account and my work account (which I also access through Outlook) to the forwarding list, and it displayed correctly in
both. When we view these emails in the server's webmail client, the emails display fine. The issue seems to be with some discrepancy between Outlook and our email server.
I spoke to our webhost about the issue, and they swore up and down the issue had nothing to do with them, and that it had to be an Outlook issue. I've had several professional web developers analyze the code that creates these emails, and they found nothing
wrong with it. Something that several of my colleagues and our webhost suggested is that the issue could be with the email headers. This is the header for the email, as viewed through Outlook:
Return-Path: <[email protected]>
X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on clubcrown.com
X-Spam-Level: *
X-Spam-Status: No, score=1.5 required=7.0 tests=HTML_MESSAGE,MIME_HTML_ONLY,
NO_DNS_FOR_FROM,NO_RELAYS autolearn=no version=3.3.1
X-Original-To: [email protected]
Delivered-To: [email protected]
Received: by x.com (Postfix, from userid 30)
id 50F7123D9E; Tue, 11 Feb 2014 14:20:00 -0500 (EST)
X-Original-To: [email protected]
Delivered-To: [email protected]
Received: by x.com (Postfix, from userid 10000)
id EC28323DA2; Tue, 11 Feb 2014 14:19:58 -0500 (EST)
To: [email protected]
Subject: A wholesale order has been placed
X-PHP-Originating-Script: 10000:thanks.php
MIME-Version: 1.0
Any help would be greatly appreciated. Let me know if more information is needed. Thank you.

Glad to hear that you have found the solution. And thank you for sharing the solution here, it will be helpful to other community members who have same questions.
Cheers,
Steve Fan
TechNet Community Support

"To Be Delivered" status in XI integration server

Hey Guys!
I have a question, right now we are trying to load Items into SRM; however, the records are being given the To Be Delivered status in the XI Integration Server. The records do not reach SRM. We have tried refreshing the XI Cache, as well as restarting the J2EE engine, all to no avail. Would anyone of you guys know how to address this issue? Thanks in advance!!
Best Regards,
Glenn

Hi,
Status: TO_BE_DELIVERED
Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
Solution:
This is done via the Messaging System receive servlet:
http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>
/<PROTOCOL>
Only if this was executed successfully the Messaging System returns HTTP 200 to the Integration Server and the Status TO_BE_DELIVERED moves to DELIVERING
1. Try logging into Sap GUI with two users: XIAPPLUSER & XIAFUSER
to see if they are blocked
2. We can check the messages:
AdapterFramework
com.sap.aii.adapterframework.serviceuser.language
com.sap.aii.adapterframework.serviceuser.name = XIAFUSER
com.sap.aii.adapterframework.serviceuser.pwd
ApplicationSystem
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name = XIAPPLUSER
com.sap.aii.applicationsystem.serviceuser.pwd
in the exchange profile to make sure the right passwords
Regards
Agasthuri Doss

'To Be Delivered' status in DAE; Issue with DAE?

Similar Messages

Maybe you are looking for