To be posted wrongly displaying in QA03

Hi
We are facing a problem in inspection lot that when the user is doing QA11 and posting the stock to unrestricted use and scrap.
Although they have posted the stock to unrestricted use and scrap ,last posted quantity is still showing as to be posted in QA13 and in QA03 in the postings field.
How to resolve this?
-mohan

Hi
This may be because of:
1.if you have not entered sampling procedure in the task list then sample size is 100% of the lot.
So system prompt you to put the 100% qty in the sample cell.
2.sometimes system tasked time to update the QALS table.try after some time.
3.What is the status of the lot.
It is SPST or SPCO
if it is SPCO then it means stock posting is performed 100%
if it is SPRQ then it means stock posting is not yet finished ,so system prompt the Qty to be posted,
I hope this helps
Regards
Sujit

Similar Messages

CC email Posting Wrong Time = "Forward 8 hours" in iphone in-box timeline

*CC email Posting Wrong Time = Forward 8 hours in the future in the iphone in-box timeline.*
All email sent from my iPhone CC to myself (back to my iPhone in-box posted in blue) is wrongly posted 8 hours in the future. If I open that email and check the time and date in the email... the send time and date are both correct... But, the email in the in-box list on the iphone continues to display the wrong time and date "in blue" 8 hours off.
(1) I tried all the tips mentioned i.e.,Rebooting and turning 3G & Auto on&off & Syncing to my Mac etc.= with no change at all.
(2) The same cc emails also sent to my MacBook Pro all are posted in the iMail in-box correctly with the normal time. The only problem is... on the iPhone in the in-box.
All the clocks and time displays on the iPhone seem to operate normally. Time zones are correct... The only problem is the in-Box email: post dating my email cc to myself = 8 hours in the future.
*The Negative Problems caused by this Issue:*
This problem causes any mail from other senders to follow the email I send 8 hour and of that all new email is lost in the middle of time line. Which is not good and, easy to lose new important email in the time-line.
*Start of the Problem:*
Seemed to start sometime after I updated my iPhone to the new iOS 4 software

Looks like it happening with incoming mail too. I have emails that are reporting 5 hours ahead. That would GMT for me in Eastern Time in the US.
The mail below came in at 09:06 -0500 and is reporting 14:06 GMT in the listing.
Here's the header from the email
X-Apparently-To: xxxxxxx via 98.136.164.163; Sun, 30 Jan 2011 06:06:32 -0800
Return-Path: <xxxxx@xxxx>
Received-SPF: none (mta1056.mail.ac4.yahoo.com: domain of xxxxxxxxx does not designate permitted sender hosts)
X-YMailISG: 1PjiNX0cZAqCLQLNliMfNb9dB2OWwI.eU2239bCnrogOySot
rR3Ydo9QZmFymPPK4pFhoTrw1IqowFnzU4QFf6scJioC9AX1q58NaONBBK4u
4Kv3uxFt5b6ZVK5vinQN2bwNTq9TLwVJx3Z7zSxQbIxi46zwa526wkkqOgtg
wMCKSq99GazScsmxBgClCDTY5QZ1lP1cLQtXZIGfHAFsoVVBxCleMIElxh
JU.Dql7fu_mt99OzNRF4VVhB0SkUvqhamwEGlmGM8QtiZefJTE.eEniMIM85
jQ7hntFFxV95XHSqGsU._ynuHMzzC9whPYVB9b97.a1nnSZeCA5362veZYpY
SE9KBbkT2jiY9g0QSULKWpj24cxR5MU7..PiINLrcpzmiVwq5rZh6p4Q8DR1
hecJaIYhbqOOpZXu.tdtn0yWFX323ZiOsJemRto.Xn1F7safHhdq8Swk4xEg
.IHY8DdFHALVpzbwRhygVN0POEH.Gwc0Q01MRcd1QARw.uEy2K.BYudADvdG
y1RJCIDnbRZYjXPoa8Hn5qnbXGrQ2gLmpweekpo9cCZpXZ5P0JRlAUk5ZTwE
u3L.5asjUXgvTb8****91BNh6InUQre3Gk8CWkWaWIvv2Qzwz.2Ztp382beE
nZsKE283hmxhBskNYSZ9xrKMyNfWyY0nhzzEunBtuZ6qZPUHK7RyrYgRTnWg
qwiORZKE1R8q14xjYKXcPUbSeY377ZFgXw0EgH4rWE15F.2sfKhcy1U68G
jrz6dTBwK0EneceaJDX_kPRbCJ53e8ILeQXW.DtuTNO0FtJ7Ft6hfon0d8
Tm.0Z00AFCDLcs66oxK0GcLbzhA22t3huUDuB_JMWrnU0ab.8Vl8l0Ysk1Br
jxxjSzEps3TXDPL5pe7nUj5KX..VgGQOCmp8h1he0cDeA8u5IsUULwQ9Qwk0
6v2X_HAQE4kPnbh8YSroiZH8uZUKmV0Klpqnae6jfzReFjeCD.SX8Ng4yyyP
UI0AdRufNWCSHzf8qi53.POH7g63.Pq72ttdYXIEtChE7iFB5KT1
X-Originating-IP: [208.79.240.5]
Authentication-Results: mta1056.mail.ac4.yahoo.com from=shiksa.dyndns.org; domainkeys=neutral (no sig); from=shiksa.dyndns.org; dkim=neutral (no sig)
Received: from 127.0.0.1 (EHLO smtpauth.rollernet.us) (208.79.240.5)
by mta1056.mail.ac4.yahoo.com with SMTP; Sun, 30 Jan 2011 06:06:32 -0800
Received: from smtpauth.rollernet.us (localhost [127.0.0.1])
by smtpauth.rollernet.us (Postfix) with ESMTP id C8080594010;
Sun, 30 Jan 2011 06:06:18 -0800 (PST)
Received: from shiksa.dyndns.org (c-66-56-51-47.hsd1.ga.comcast.net [66.56.51.47])
(using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits))
(No client certificate requested)
(Authenticated sender: nswint)
by smtpauth.rollernet.us (Postfix) with ESMTPSA;
Sun, 30 Jan 2011 06:06:18 -0800 (PST)
Received: from localhost.localdomain (shiksa.dyndns.org [127.0.0.1])
by shiksa.dyndns.org (8.14.4/8.14.4) with ESMTP id p0UE6Lxo003350
for <xxxxxx>; Sun, 30 Jan 2011 09:06:22 -0500
Date: Sun, 30 Jan 2011 09:06:22 -0500
Message-Id: <[email protected]>
X-Priority: 3
Subject: xxxxx by Noah Swint (0040) Sun, Jan 30 9:06 AM
To: xxxxxxx
From: xxxxxxx
X-Rollernet-Abuse: Processed by Roller Network Mail Services. Contact [email protected] to report violations. Abuse policy: http://rollernet.us/abuse.php
X-Rollernet-Submit: Submit ID 2c30.4d45705a.65e24.0
X-FetchYahoo: version 2.14.0 MsgId 152788AKOkiGIAAOhxTUVwaAwy2Se7FOE

Watch movies on ipad it shows the wrong display of the movie how to fix?

When I try and use the video app and use the shared folder to run movies from iTunes. The wrong display of the movie shows up how to fix

Well when you hook up to your computer over wifi their are to folders one for the videos on the iPad and one for the shared from iTunes on the computer where all my movies are. And the worng display means that the picture it shows of the movies is wrong. When you touch the picture of the movie it comes up with what to is and the real picture comes up of the moive. When you back out the picture goes back to the wrong picture of it.

Wakes up to wrong display setting then quits everthing !

Hi all,
I have a mac mini running an updated snow leopard plugged via an adapter into the HDMI slot of my Philips 40" LCD screen. For some time now, whenever I wake up the mac mini and the TV (both of which go to sleep after a period of inactivity), the screen starts off with the wrong display setting moving from 1360 x 768 to 1600 x 900 which is a much worse picture. I can switch it back through the menu bar, and that usually works, although sometimes, it also quits any open apps so I get multiple 'unexpectedly quit' error messages. This can also happen if I use the remote to wake it up without turning on the TV.
Any ideas how I stop this ? I have repaired permissions and also verified and repaired the hard drive and that seems to have a short term impact.
Any help would be much appreciated.
Ben

See if there is a way to turn off CEC on the Philips through its menu system and see if that helps.

HT1825 Can I connect post cinema displays to my G4 and how?

Can I connect post cinema displays to my G4 and how?

You can use newer monitors but there are different ways to connect.
It all depends on the video card installed in your computer. Different model cards had different ports. My G4 MDD has the ATI Radeon 9000 with one ADC port (abandoned technology) and one DVI port (useful technology). So we need to either see the description of your graphics card from System Profiler >Graphics/displays, a photo of the ports on your card, or both.
As long as you find a monitor that shares the kind of ports on your Mac, you will be fine. I have a 2008-vintage LCD monitor on that circa 2003 MDD of mine. The MDD shipped with an Apple DVI-to-VGA adaptor so I can connect any monitor with DVI or VGA ports.
There is an inconsistency in your equipment profile: No PowerMac can run OS 10.6. Please do "About this Mac" and verify your processor type and Mac OS version. Then you can edit your profile to avoid future confusion.

TDS certificate address wrong display ?

Hi
All Experts.
I am printing TDS certificate for vendor but the address for comapny is displaying wrong on certificate however we have
maintained a correct adrress in comapny code data.
Can any one please let me know for TDS certificate from where this address do taken ?
Help is required.
Regards,
Pankaj.

hi,
You can edit the address TDS certificate address wrong display
SPRO --Fianancial Accounting or Fianancial Accounting New -- Fianancial Accounting Global Settings -- Tax on sales and Purchases -- Basic Settings-- South Korea-- Business Places
Enter your Comapny code then select your Business Places here you can edit address to selecting address option.
If you are using any customized Program please check with your ABAPers either any Z table is maintained, you can also check through Progrm where address has maintained.
Regards,
Rama Moahn Bangaru
Edited by: B.Rama Mohan on Jul 15, 2009 2:56 PM

Data is posting wrongly in Idoc

Hi all,
We are facing issues with data is posting wrongly in File to Idoc scenario. When we test this scenario everything shows success in XI but in R/3 idoc generating with 64 status and data is not posting correctly. Suppose our second field if we send more than 20 length it is trimming upto 20 only. If we change offset to take 40 length to second field again it is taking 20 legth of sceond field and rest of third field values. As i have been checked with Abapper they were saying like whatever data we are sending to R/3 it will be coming as a single structure(Sdata) . But i have been checked outbound XML also in that everything shows fine. Is there anything problem in Xi . I have been re-imported idoc in XI also and it is equipment master Idoc. They have been used offset also still no use. My doubt is why from second field on wards data is posting worngly.They have used structure sdata.
Example:
Suppose, Outbound XML in XI:
<Idoc>
<Field1>abc
<Field2>4364255166110335211
<Field3>Computer
<Field4>Laptop
<Field5>sdas
<Idoc>
Idoc in R/3:
Field1:abc
Field2:43642551661 Computer Laptop
Field3: sdas
Field4:
Field5:
Could anybody help me on this. Why is data wrongly posting here...
Rgrds,
Aparna.

Hi,
i have faced same issue before.
 in receiver communication channel for IDoc you have to specify some important parametres port and sap release so on...
 while cretaing a port you have to give rfc destination in your port by using t-code IDX1.
go to rfc destination which was you given in port. check in your destination, tab MDMP & UNICODE.
Flag or disflag the option UNICODE/NO-UNICODE and test again.
once again check your message mapping.
regrds,
ganesh.
Edited by: ganesh.nijampudi on Nov 30, 2011 7:47 AM

Mac Mail Wrong Display Name

My Mac mail app for my icloud account has the wrong display name for the account. About three years ago, I bought my mac on the company credit card, and had to use our accounting director's name for the billing address. (We'll call him Richard Nicks). Three years later, I open Mac mail and HIS name is the display name for my icloud email!
Of course it's grayed out, so I have to change it in the icloud account. But when I go log into icloud, his name does not show up anywhere. I've confirmed the email addresses are all the same so I know I don't have multiple accounts or anything. I've closed mail, resynchronized it, rebuilt the database, no joy. Where in the world is it getting his name from and how can I change that?
Thanks
OS X 10.9.5

Thanks for the response.
In Account Preferences, the name and email address are grayed out so I cannot change those.
I looked in my contacts, go under All iCloud, and there's only one contact. The picture is of a piano that says Me, so I assume that is my Me card. This has my correct name.
Interesting to note, when I send an email from iCloud on my iPhone, it comes across with the correct display name.
I'm at a loss on where else to check. Thanks for the help!

Asset unplanned depreciation posted wrongly

Dear all,
For 100 assets unplanned depreciation posted wrongly. In AB08 reversed the documents but FI document is not generating for that. After this when I am doing repeat run in AFAB then normal depreciation is getting effected by this run. How to reverse the previous wrong run and post correct one Kindly suggest. Its very urgent.
Regards
Roomi

you can reverse posted depreciation by using OASV, but be VERY careful
that you reverse the FI and CO postings.
Thanks & Regards,
Suresh

Posting wrong after billing

hi experts,
here one issue which i am unable to understand and solve it
that " after billing ,i posted account , but the entries are posting wrong ,"
customer is not shown in entry and account is from both sides
JCLK 1 50 40010000 Sales-Dom-Base sale 10,000.00- INR
2 40 40010000 Sales-Dom-Base sale 10,000.00 INR
so where is my mistake and whats the solution i can get ?
thanx in advance
madhu

Hi,
You can check the Account analysis by goin to VF02 screen enter the invoice no. and on top Environment-A/c determination analysis- revenue accounts ..
Check the G/L accounts details and compare with the VKOA settings..it may give you some idea abt this issue..
Reg,
JJ

Last firefox version : french character (as à, ù ..) have a wrong displaying

On the previous version the character encoding was set on "automatic". Now this is disable and sometimes the french specific charaters have a wrong display
== This happened ==
Every time Firefox opened
== Since I get the last version

on MAC OS X 6.3 system and no plugin
Is impossible to set and fix UTF-8 in the Menu Affichage Encodage UTF8
At the recharge (reload) the wrong encoding is return !!!

Asset Posted Wrongly to Another Asset

Hi
My user have posted one Non-PO Asset posting into the SAP system, but realized that the Asset No. posted wrongly in last month (Nov 06) and depreciation had been done.
Please suggest whether I can reverse and repost to the correct Asset No. & what about the depreciation and any impact if I have done that.
Appreciated your inputs,
Rgds,
Vyas

Hi Vyas,
Execute transaction code AS92. Input the Asset Number, Sub-Asset Number and Company Code of the wrongly posted asset you want to correct. Then click on "Takeover Values". Delete the wrong figures for all depreciation areas for both the "***.acquis.val." and "Accm.ord.deprec" fields. Enter the correct Acquisition and Accummulated Depreciation values and Save your entries.
Next, you can now go ahead and recalculate depreciation using transaction code AFAR. This would adjust your books for you.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

What is going on with all my apple device. Facebook keep displaying users or friend in wrong display picture and today uses my friend picture to display my I D...what is going on. A bug or what?

What is going on with all my apple device. Facebook keep displaying users or friend in wrong display picture and today uses my friend picture to display my I D...what is going on. A bug or what?

IPad and IPhone 4

Poster frame displays before FLVplayback

I embedded a video on my web site using Flash there's a minor
issue, the poster frame displays first then a couple of seconds
later the FLVplayback interface is displayed. How do I get it to
appear all at once? I'm guessing I might need some sort of preload
script or set some property.

Look into the preloader tutorial(s) found at
gotoandlearn.com. There should be one for AS3 and one for AS2
somewhere there.

Wrong display

I give an example, you can put this example into SQL Developer's SQL worksheet:
rem i think one's shoe must
select 'E' from dual;
It looks like below is a string:
's shoe must
select '
I think if there is 'REM' in the line head, the character color should be grey. Doing that can void this wrong display.

You can use /* */ for multiple line comments and -- for single line comments.
Sue

To be posted wrongly displaying in QA03

Similar Messages

Maybe you are looking for