To be sure that the new mobile not used befor u
just u enter *#92702689# and then it will show u the total of minutes dailing even it shown zero in the call duration
If your Outlook contacts and calendar events are precious, then you should be maintaining a backup for your Outlook data along with all your other important/precious data stored on your computer's hard drive. This is important regardless the platform for a number of reasons, but even more so with Windows due to constant virus, adware, and spyware concerns.
Update your backup for your Outlook data before syncing contacts and calendar events with your iPhone, which is a good idea before syncing this data with any device. If something doesn't go right, you can restore your Outlook data from your backup.
Similar Messages
-
hello there peeps, i cant use the iphone that i bought from a local buy, swap and sell site. the phone was restored to factory setting and i used it for 4 months but after that a message appeared and said that this phone has been lost. i tried to restore it again but i need the previous owner's apple id and password.
i tried to contact him but i cannot reach him already, i tried reaching him on the sell site's page but still no response. i am pretty sure that the phone is not stolen coz i was present when he restore it to its factory setting. i just wanna ask you people what else can i do with it to be activated again, i paid $200 for this iphone 4 and dont just want it to go down to the drain. PLEASE HELP.. thank youonyok13 wrote:
... i cant use the iphone that i bought from a local buy, swap and sell site.... i just wanna ask you people what else can i do with it to be activated again,
The Apple ID and Password that was Originally used to Activate the iDevice is required
If you do not have that information you will not be able to use the Device.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818 -
We had to replace my husbands iphone. Everything but our photos have transferred to the new phone. I made sure that the new device is showing up in find my iphone. I have turned on photo stream on all devices. Why aren't they streaming to new phone?
Only photos taken in the last 30 days are transferred using Photo Stream.
-
My iphone 4s was stolen. How could I destroy it so that the guy can not use it any more?
My iphone 4s was stolen. How could I destroy it so that the guy can not use it any more? system IOS 6
or just lock the phone forever?
Could it be possible?
Thanksif you want to erase all data in the phone do this
If the phone is connected to the Internet and contains your account you can erase the phone by
1 Going to ( www.icloud.com) and sign in With your account (the account you use in the stolen phone)
2 go to Find My iPhone
3 if the phone connected to internet you will see the phone on the map
4 choose the phone and click (erase everything)
i wish this help you
Brother -
My I phone4 was taken. there is no tracking because Apple told me it was to hold to support the tracking system. Is there any want thatone could track it by the serial number by posting it with apple and if someone trys to reactivate it and registers my number it can be notified that the devise was stolen? Any options
kjnbaa642 wrote:
Is there any want thatone could track it by the serial number by posting it with apple and if someone trys to reactivate it and registers my number it can be notified that the devise was stolen?
No. Apple does no tracking of lost or stolen devices.
If you set up the Find My iPhone service prior to your iPhone going missing, something which your iPhone certainly would support - any device that can run iOS 5 or later can - then there is a chance that can be tracked, though it depends on a number of factors (the iPhone is turned on, connected to either the 3G or a WiFi network, or has not had the Find My iPhone service disabled or the iPhone been completely restored). Log into icloud.com and go to the Find My iPhone section. If you did not set up Find My iPhone, check with your cell carrier. Some carriers offer their own tracking service, though you usually have to pay for it.
If your carrier does not offer such a service and you did not set up Find My iPhone, then there is no way to track the unit. Contact the police and change any passwords for any online accounts you may have used from your iPhone (the iTunes Store, for instance).
Regards. -
I want to know how to remove other computers from i tunes that are no longer working.
Hello DJSmithLaner,
Thank you for the question. It sounds like you have authorized five computers, but you no longer have access to all five computers.
You can deauthorize all the computers associated with your Apple ID and then authorize the computers you still use.
Use these steps to deauthorize all computers associated with your Apple ID:
Deauthorize all computers
After you authorize two computers, you'll have the option to deauthorize all computers for your Apple ID. You can deauthorize all computers once a year. You should deauthorize all your computers in these cases:
If a computer doesn't work anymore
If you don't have one of your computers
If you used 5 authorizations and want to authorize a new computer
To deauthorize all your computers, follow these steps:
Click to open your account in iTunes (you may need to sign in with your Apple ID), or follow these steps:
Open iTunes and click iTunes Store.
Click Sign In and enter your Apple ID.
Click your Apple ID and select Account.
Click Deauthorize All.
The Deauthorize All button appears only if you have more than two authorized computers.
Once you have deauthorized all the computers, use these steps to authorize the computers you have access to:
To authorize a computer, follow these steps:
Open iTunes.
Choose Store > Authorize This Computer from the menu bar.
You may need to show the menu bar to see this option in Windows. In earlier versions of iTunes, you can access this option from the Advanced menu.
Enter your Apple ID and click Authorize.
You can find those steps and more information at the following link:
iTunes Store: Authorize or deauthorize your Mac or PC
http://support.apple.com/kb/ht1420
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My ipad was stolen and I want to permanently disable the device. Is this possible
What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T, Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. Lost or Stolen iPhone? Here’s What to do
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
There is no one you can report to but the police. If you report it to Apple they will just note that it was stolen. If you did not activate Find my Phone for your device, then you cannot disable it. -
I have changed the email signature on my iPhone, when composing a new email the signature is there, however when I am replying to an email it is not, how can I make sure that the signature is at the end of every email I send?
Yes I know what you mean about it cluttering the thread and for personal emails it is better without the signature. However this relates to sending business emails from an iPhone so I need the signature present on every email.
I can't find anything in Settings so I was hoping someone may have some knowledge/information/experience regarding this problem. -
i can used any app, but im specially concerned about one i use the most. It shows a screen telling me that the app is not valid but im pretty sure it is
Older apps which were not written for Intel Macs will no longer work in 10.8 and newer versions of OS X.
Matt
Matt,
Actually it's 10.7 and newer versions of OS X. -
Every few days we see two dialogs with the following messages:
Dialog 1, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller.
Dialog 2, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliance check cannot be completed, the server will automatically shut
down in 8 day(s) 23 hour(s) 0 minute(s).
The server is not (and never has been) joined to a domain or had any DC roles installed. In fact its still connected to the default Workgroup.
The server was configured in our office and never showed this message until it was installed on site. The main difference from what I can see is that when installed on site it was given a static IP address and does not have any DNS settings in the network
adapter properties.
I have scoured a number of forums on this error but in almost every other instance of this error message the servers are connected to a Domain Controller and the solutions generally are linked to dis-joining and rejoining the domain. Unfortunately this is
not an option for this scenario.
I initially thought that adding some relevant DNS server IP address may resolve the issue, however, we have the exact same model server configured exactly the same running at a different site that does not experience this problem. This server also has no
DNS server configured.
I have seen a post that suggests turning off the servers "Foundation Checking", but I'm unsure how to do this.Thanks for your response Vivian.
I can confirm that this server is not (and never has been) a member of any active directory, it is configured as a Workgroup server. It was initially configured on a network that does have an active directory, but was never joined to it. During that time it
never displayed these messages.
The server was moved into production on a different site and network and setup with a static IP address.The site network does have its own active directory but the server was not joined to it. It is whilst on this new network that these messages began.
Since my original post DNS servers have been added and the Microsoft activation has been verified, however, the messages are still appearing.
There are only 2 user accounts configured on this server. The local admin account and another local admin user.
The remote desktop services roles have been installed but not yet configured. I don't think that has any bearing on this scenario though.
The description of this error in the above "Introduction to Windows Server 2012 Foundation" link states:
This error occurs when the server cannot finish checking the requirements for the root domain, forest trust configuration, or both. It usually happens when the server cannot connect to a domain controller. If the situation persists, the server will
shut down 10 days after the first time the compliance check failed. Each time this error message occurs, it will state the actual time remaining before the server will shut down. If you restart the server after it has shut down because of non-compliance, the
server will shut itself down again in 3 days.
The above description leads me to the following question - In a Workgroup environment, does the server still try to contact a domain controller to establish a level of trust? If this is the case could it be that the server can no longer see the initial DC
on its new network and this is what is triggering the messages?
Am I clutching at straws here? -
I have photos on my iphone 4 that i'm trying to transfer to iphoto. The problem is when I plug the phone in, it only wants to transfer the new photos, not all. How can I take all the photos off my phone and put them into iphoto? Even if there are duplicates, I'd like to make sure I get all the photos from my phone into iphoto. Thanks
To see all the photos on the phone, including photos that have already been imported into iPhoto, deselect the "Hide Photos Already Imported" checkbox. If the camera contains photos that have already been imported into iPhoto, those photos are hidden by default.
-
I lost my iphone 5 without signing out my account but I have bought another one. How can I make sure that the person in possesion of the phone is not using my account to make purchases? ?
Thanks for your prompt response... will changing my password also stop the authomatic download of my new applications and music from downloading to the stolen phone?
-
I left my iPhone attached to my computer to do an update and now I can't use the phone at all. It was taking so long I left it, when I came back there was an erroe message saying that I need to do a factory restore on the phone. It wasn functioning perfectly before I attached it to iTunes to do the update and now since I can't even be sure that the back up completed, I'm faced with losing a lot of stuff recently added to my phone.
I don't want to do a restore, I just want my phone back to how it was this afternoon before I connected it to iTunes.If the screen shows a plug going to itunes, then you have no choice, It's in recovery mode. You'll be given the chance to restore from a backup either from itunes or icloud.
I assume when you got the message to update (was this for the ios or update some apps?), that was before the device when dead. At any rate, doing a restore does not change the ios. -
I am trying to read my iMessages from my iPhone 4S on my iPad 2, but the messages do not show up on my iPad 2. I made sure that the receiving email address is the same on both devices and both are signed into my single Apple account.
Is it possible that the person who sent the message to your phone sent it to your phone # instead? Try sending a message to your phone via the email address and see if it shows up on the iPad.
-
Hello,
I have been told that firefox is the best. So, I thought I would try it. But, since I have downloaded it, which has been recently it is telling me when I click on information about a page that the page is NOT being
encrypted. This is all new to me and I DESPERATELY NEED SOME HELP because I go to school and
have to use my computer. Thank you! S. HoweNote that Firefox will tend to learn to go to secure sites. So once you visit a site using the secure option you will not see the message again.
This forum may be read using
# Not Secure <br />http://support.mozilla.org/en-US/questions/
#Normally you would use Secure https://support.mozilla.org/en-US/questions/988901
If you have already used the secure version Firefox will in future use that when you try to use the insecure version.
Maybe you are looking for
-
How to add one DC into Another
Hi I have created one DC ,now I want to use this DC into another. My application is like: I have one i/p field and beside it one button which calls another DC.So how to do this? Thanks Prajakta
-
We have installed RM client in the POC server . Installed Deployment Agent in Dev server . We created Configuration stages for POC->Dev. We created a template with x copy deployer and selected source as build definition. While releasing we faced
-
My daughter's iPhone 3gs has just been replaced by Apple. When she tried to restore her backup files she was told to upgrade to itunes 10, but she can't because her Macbook is too old to run it. What do we need to do to get all her stuff onto the new
-
Acrobat 9 does not recognize the smart card reader that work with other app. Can someone help me?
Hi to All, Acrobat 9 (included in CS4 design premium) does not recognize the smart card reader. I have a smart card reader ACR38 smart card that works with all applications except Acrobat 9 pro. I tried to uninstall and reinstall it again, but when I
-
GarageBand Share-- Send to iTunes error
I'm new to GB- appreciate any help you can offer. I've recorded a book I wrote. The length is 4 hours 34 minutes. When I try to Share-->Send to iTunes, so I can convert to MP3, I get the following message... Maximum File Size of 2GB Exceeded Please c