To begin with netweaver

i just want to start with netweaver development studio ..can u just guide me through the various contents in it...

Hi Swetha,
Have a look at the following links:
New to Netweaver
/thread/122598 [original link is broken]
what's the relationship between NetWeaver and R/3 ??
/thread/352079 [original link is broken]
All these threads will give you a good insight as to what all you have in front of you when we talk about Netweaver....
Bye
Ankur
Do reward points for helpful as well as solved answers!!

Similar Messages

  • Error from reports from ZAM(Graph or PDF) - File does not begin with '%PDF-'.

    I just noticed today that any Graph or PDF report I try to view I get the
    following error - Error from reports from ZAM - File does not begin with
    '%PDF-'. I tried to just save the file and then open it, but get the same
    error. I can open other pdf files I have downloaded from other sites ok.
    Anyone have any idea? I haven't done anything to that server that I am
    aware of in quite a while.
    Thanks
    Bill

    I took a closer look at the files it downloaded, opened them with notepad,
    haer is what it says:
    XSL Transform or subsequent processing failedThe document has no pages.
    "Bill" <[email protected]> wrote in message
    news:2bBtk.2164$[email protected]..
    >I just noticed today that any Graph or PDF report I try to view I get the
    >following error - Error from reports from ZAM - File does not begin with
    >'%PDF-'. I tried to just save the file and then open it, but get the same
    >error. I can open other pdf files I have downloaded from other sites ok.
    >Anyone have any idea? I haven't done anything to that server that I am
    >aware of in quite a while.
    >
    > Thanks
    >
    > Bill
    >

  • Error : (does not begin with '%PDF-'. ) when print report in pdf

    Hi all,
    http://www.oracle.com/technology/obe/apex/apex31nf/apex31rpt.htm
    using the example in the above link,
    I have created a report and tried to print in pdf format,
    But
    does not begin with '%PDF-'. this error is appearing when the adobe reader is opening.
    Could anyone help me to make out the reason for this error?
    bye
    srikavi

    Srikavi,
    Which rendering engine are you using? BI Publisher? Apache FOP? Did you follow the steps outlined here when you configured PDF printing:
    http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html
    Regards,
    Marc

  • Safari won't open a file for mactree download manager beginning with "gto

    I am trying to download gametree mac download manager and the page will not open because it states it cannot open links that begin with "gto:"

    Seems the software is not fully compatible with Mountain Lion >  https://gametreemac.com/help/

  • Hi - When I go into Contacts and type a letter in the search bar to get to last names that begin with that letter I get a list of random names that don't correlate to the letter. My settings are fine.  Help ?

    Hi. When I go into my contacts and type a letter in the saerch bar to get to a list of last names that begin with that letter I get a list of random names that don't begin or end with the letter.  My Settings appear fine.  Any insights would be greatly appreciated.  Cheers Bill

    The search bar is not designed to take you to names beginning with the letter you put in. If you want to do that, use the letters down the side. In the search bar, the device will return results for all contacts that have that have that letter in them. If you type a couple of letters of the name, you'll find what you want faster. Once you get used to how it works, it's quite efficient.
    Best of luck.

  • Error with a PDF document in a BSP App: "File does not begin with '%PDF-'"

    Hi All,
    I have the following piece of in the layout of a BSP Application in our system.
    <%
    DATA: LV_PDFSIZE TYPE I,
                LW_PDF     TYPE TLINE,
                LV_XDATA   TYPE XSTRING.
    data: LT_PDF type ZGTIS_TAB_TLINE,
          lv_id type zgtis_http_id,
          filename type STRING.
    lv_id = session_id.
    import lt_pdf to lt_pdf from
           database zgtis_http_indx(in) id lv_id.
    RUNTIME->SERVER->RESPONSE->SET_HEADER_FIELD(
        NAME  = 'Content-Type'
        VALUE = 'application/pdf').
    if w_printall ne 'X'.
    CONCATENATE 'display; filename="invoice_' BIL_NUMBER '.pdf"'  INTO filename.
    else.
    CONCATENATE 'display; filename="invoice_' 'ALL' '.pdf"'  INTO filename.
    endif.
    RUNTIME->SERVER->RESPONSE->SET_HEADER_FIELD(
        NAME  = 'Content-Disposition'
        VALUE = filename ).
    RUNTIME->SERVER->RESPONSE->SET_HEADER_FIELD(
        NAME  = 'pragma'
        VALUE = 'no-store').
    RUNTIME->SERVER->RESPONSE->SET_HEADER_FIELD(
        NAME  = 'cache-control'
        VALUE = 'no-store').
    *     Convert to XSTRING
    FIELD-SYMBOLS <P> TYPE ANY.
    LOOP AT LT_PDF INTO LW_PDF.
      ASSIGN LW_PDF TO <P> CASTING TYPE X.
      CONCATENATE LV_XDATA <P> INTO LV_XDATA
        IN BYTE MODE.
    ENDLOOP.
    *     Set the response data
    RUNTIME->SERVER->RESPONSE->SET_DATA(
        DATA   = LV_XDATA ).
    %>
    This piece of code works fine when 'If w_printall ne 'X'.' condition is succesfull and I can see the PDF but when w_printall = 'X' I get the above error on a popup box, the error is "File does not begin with '%PDF-'" and I cant see the PDF.
    Does anyone have any suggestions!
    Kindly help.
    Regards,
    Karthik

    Check this thread
    it is a Big Discussion on that.
    In first page and second page you can see solutions.
    /thread/747643 [original link is broken]
    one with patch and other with setting in Adobe.
    Regards
    Vijay babu Dudla

  • Error when trying to create a new object that begins with Z

    Hi forum,
    When I try to create a new BW object that begins with Z (infofuente, infoarea, component application), I skip the following error.
    Namespace''is not a valid namespace BI
    Message no. R7017
    Diagnosis
    Namespace''must be entered in both the BI RSNSPACE table and the basic table TRSNSPACE or the view V_TRNSPACE. You also have to enter the relevant generation namespace '& V2' in TRNSPACE table. This value is taken from table RSNSPACE.
    Both namespaces must be set to 'Changeable' - providing they are not empty.
    Response System
    You can not edit or create an object in this namespace.
    Procedure
    Use a different name.
    Or contacct your system administrator. He / she can switch to the namespaces' Changeable 'using SE06 transaction, or - if they do not already exist - enter them in the table above named using sm30 transaction.
    If the namespace '& V1' is empty, then the problem is with the generation namespace '/ BIC /'.
    Procedure for System Administration
    I've been following steps said to me, and yet I still persisted error. I am probably missing something ... that may be?
    A greeting,

    Hi,
    Try to create the objects again and take the screenshot of SU53 when you get the error and see the authorization object for which you are getting the error here.
    It is possible that you dont have development authorization.
    Also the issue could be that the system is not configured to create the objects begining with Z.
    Check this with basis as well.
    Thanks
    Ajeet

  • My files no longer sort properly - files beginning with AEIOU come before

    My files no longer sort properly - files beginning with AEIOU come first after numbers and special characters, then letters H, K, M-N, P, W, B-D and so on. I click on the column header again and it reverses the sort, but still messed up. This convoluted sort appears in all views. All the letters are grouped together, so all the "a"s, "e"s, etc are being sorted by some algorithm, but it's not alphabetical. I noticed it after installation of Snow Leopard, but it could have been that way before. I did a wipe and load and just imported user settings from Time Machine afterwards. Any suggestions on how I can fix this?

    Usually, it is (1) a preference file located here
    <user home folder>/Library/Preferences/
    In this case, the problem is not just Finder if it also happens in Mail. Unfortunately, there are a lot of preference files.
    Or it is (2) a background process that runs when you log in to your account. If it is something that starts automatically, it may be one of your Login Items. You can look at System Preferences Accounts pane +Login Items+ tab. That list shows processes that run when you log in to that account. If you see anything that you no longer need, you should remove it. Look for anything there that might, for whatever reason, change the alphabetical sort order.
    Make sure English is selected as language in System Preferences +Language & Text+ pane. It seem improbable that it would not be, but I just noticed there is a setting at the bottom of that pane that says +Order of sorted lists+. Does that have something other than English ?

  • How to declare internal table in BADI with variable name beginning with 0..

    Gurus,
    How to declare an internal table within a BADI. I have to implement a BADI UC_TASK_CUSTOM for BCS to BW load and there i have to  declare an internal table like:
    TYPES:          BEGIN OF t_cube_data,
                    0cs_version       TYPE /bi0/oics_version,
                    0sem_cgcomp       TYPE /bi0/oisem_cgcomp,
                    bcs_vers          TYPE /bic/oibcs_vers,
                    bcs_lcus          TYPE /bic/oibcs_lcus,
                    bcs_ldch          TYPE /bic/oibcs_ldch,
                    bcs_invcom       TYPE /bi0/oibcs_invcom,
                    bcs_litem         TYPE /bic/oibcs_litem,
                    bcs_llob          TYPE /bic/oibcs_llob,
                    bcs_lmay          TYPE /bic/oibcs_lmay,
                    0move_type        TYPE /bi0/oimove_type,
                    pcompany         TYPE /bi0/oipcompany,
                    bcs_lprg          TYPE /bic/oibcs_lprg,
                    figlxref3         TYPE /bic/oifiglxref3,
                    fiscyear         TYPE /bi0/oifiscyear,
                    fiscper3         TYPE /bi0/oifiscper3,
                    fiscvarnt        TYPE /bi0/oifiscvarnt,
                    curkey_gc        TYPE /bi0/oicurkey_gc,
                    unit             TYPE /bi0/oiunit,
                    cs_trn_gc        TYPE /bi0/oics_trn_gc,
                    cs_trn_qty       TYPE /bi0/oics_trn_qty,
              END OF t_cube_data
    But with this declaration it gives a error saying that u cannot have a variable beginning with 0...like 0cs_version....
    but i have to do it for my functionality to wrk...
    Please help me do it....
    how can i declare a internal table that allows me to have variable names that start with 0....
    Please help....Its URGENT....
    Thanks
    Sam

    Murali,
    I need to have 0 before the variable name in the declaration of the internal table....how can i attain that....
    Please suggest...
    Thanks
    Sam

  • Re emailing photos from iPhoto: after I create an event, I later add captions, each one beginning with a number. I'd like to email a set of these photos in the order they are captioned, not the original order of the event.  How do I do this?

    I take a number of photos of an event which I download into iPhoto as an Event.  I later add captions to some of the photos in the Event, and I want to share them by email IN THE ORDER OF THE CAPTIONS RATHER THAN IN THE ORDER THEY APPEAR IN THE EVENT.  Each caption begins with a unique number followed by text.  How can I email them in the order of the caption numbers?

    You can't, block capitals notwithstanding. Try using numbered Filenames. But remember how it's all received at the other end is entirely based on the settings on the recipients machine, so it might well be moot.

  • What is a file that begins with ._  ?

    A client just sent me some files that begin with ._ in the extension.
    (Client claimed they are vector files for a video project)
    I tried to download and Mac told me they are system files and will be hidden.
    sure enough they didn't show up my desktop. I download again adding a " to the front of the extension. I got the file on my desktop- but it would not open.
    I trashed it.
    I then did a spotlight system search for the ._ files I think I download and I got no result.
    I'm now worried.
    Are these ._ somewhere on my system?
    Can they do harm to the system?

    In Unix the initial period in a filename causes the file to become invisible. Spotlight's default configuration will not locate invisible files. If the files are downloaded to your Downloads folder or to your Desktop then you can make them visible in a number of different ways.
    1. Enable Finder to Show Invisible Files and Folders
    Open the Terminal application in your Utilities folder. At the prompt enter or paste the following command line then press RETURN.
    defaults write com.apple.finder AppleShowAllFiles TRUE
    To turn off the display of invisible files and folders enter or paste the following command line and press RETURN.
    defaults write com.apple.finder AppleShowAllFiles FALSE
    Alternatively you can use one of the numerous third-party utilities such as TinkerTool or ShowHideInvisibleFiles - VersionTracker or MacUpdate.
    2. Open the Terminal application in your Utilities folder. At the prompt enter the following commands pressing RETURN after each. I will assume for the purpose of illustration that you have downloaded the files to your Desktop.
    cd /Users/yourusername/Desktop
    mv ._filename.ext filename.ext
    This will rename each file to the same filename but without the initial "._". Repeat the "mv" command for each file substituting the actual filename.ext for the "filename.ext" in the command line. If you have downloaded the files to a different location, then substitute the full path to that location in the "cd" command line.
    3. Download a utility such as Batch Rename'Em from CNet Downloads or MacUpdate and use it to mass rename the files by removing the initial "._".
    4. Have your client rename the files before sending them to you by explaining that they are invisible on the Mac with the initial period in the filename.
    5. Configure Spotlight to search in system folders and to display invisible files in search results.
    6. Download Easy Find - CNet Downloads or MacUpdate - and use it instead of Spotlight.
    Message was edited by: Kappy

  • PO PDF Error - File does not Begin with '%PDF-'

    Hi,
    I am working on Implementing PO PDF with XML data and RTF Template. I have created a new template in XML Publisher and followed the following set up steps
    Setup / Organizations / Purchasing Options / Control TAB / set 'PO Output Format' = 'PDF'
    setup / purchasing / document types / select "Standard Purchase Order" / Set the Document Type Layout to your new template.
    When I view the document from PO Summary > inquire > View Document, I get an adobe reader error
    'File does not begin with '%PDF-', how ever when I preview it from the template definition, it opens fine.
    I tried running PO Output for communication with my custom template but I don't see the parameter 'Purchase Order Layout'. The last parameter in the list is 'Include Blanket'.
    Am I missing any set up steps? However when I use the standard Purchase Order Layout in Document Types set up, the Inquire > View Document created a PDF output.
    Any help is greatly appreciated.
    Thanks,
    Sharmila

    I encountered same error in BPA Invoice Print. I remove a MLS function from the program definition and this error disappeared. Have not fully investigated but maybe this will help. Thanks.

  • File does not begin with '%Pdf-' in Persona to take a Print

    Dear all,
    What would be the reason for the error " File does not begin with '%Pdf-' when its trying to open in adobe reader in Persona.
    Does persona support any KMC content management ? please resolve this error.
    Find the attached screenshot.
    And we are using persona version as :
    Component
    Release
    SP-Level
    Support Package
    PERSOS
    100
    2
    SAPK-10002INPERSOS
    Cheers, Vasanth S

    hi vasanth,
    This issue might not be related to personas.
    Is this happening with all the PDFs?
    Also, i would recommend you to upgrade your personas SP to latest.
    New features in Personas 2.0 SP04; also Personas 1.0 SP04
    Sushant

  • How to I get the iPad to recognize a number beginning with 0 without it cutting off the 0

    How do I get the iPad to recognize a number beginning with 0 without dropping the 0.  And how do I get the iPad to recognize a 4 (birth year) or 5 (zip code) digit number with adding a comma delineating it to thousands?

    Hi,
    Because the iPad requires more power than from a normal USB port can supply therefore you can not charge an iPad using ONE USB port on a laptop/PC.  Please try this free utility, many HP users say it works:
       http://event.asus.com/mb/2010/ai_charger/
    Regards, 
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I recently purchased a used ibook g4 and want to update to itunes 10.2. It tells me i need mac os 10.5 to do so. Today is the first day I have ever used a mac and I am not well versed on computers to begin with. What do I need to do?

    I recently purchased a used ibook g4 and i want to update to itunes 10.2. It tells me that I need to update to mac os 10.5.  Today is the fist time that I have ever used a mac and I am not very well versed on computers to begin with. From what I gather I need to purchase the mac os 10.5 but there are a lot of different options and I dont know what I need to do. Can somebody point me in the right direction?  I dont want to spend too much money because i just want my ipod touch to be compatible with my ibook. thank you

    Hi
    Your question is more suitable for the 10.4's General Forum rather than 10.4 OSX Server. Post here instead:
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.4_tiger?categoryID=1 77
    You'll have more of a chance of someone responding.
    HTH?
    Tony

Maybe you are looking for