To build the organization's Active Directory permissions are what we need
To build the organization's Active Directory permissions are what we need
what is your actual question? Can you be more specific?
Santhosh Sivarajan | Houston, TX | www.sivarajan.com
ITIL,MCITP,MCTS,MCSE (W2K3/W2K/NT4),MCSA(W2K3/W2K/MSG),Network+,CCNA
Windows Server 2012 Book - Migrating from 2008 to Windows Server 2012
Blogs: Blogs
Twitter: Twitter
LinkedIn: LinkedIn
Facebook: Facebook
Microsoft Virtual Academy:
Microsoft Virtual Academy
This posting is provided AS IS with no warranties, and confers no rights.
Similar Messages
-
Team,
I am trying to Install Exchange on my Lab, getting below error
message.
The Schema Role is installed on Root Domain and trying to install
exchange on Child domain.
1 Root Domain - 1 Child domain. both are located on single site.
“Setup encountered a problem while validating
the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
replication to complete.”
Followed below articles:
http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
http://www.petenetlive.com/KB/Article/0000793.htm
transferred the schema roles to different server on root domain, still no luck.
can someone please help me.
regards
Srinivasa k
Srinivasa KHi Srinivasa,
I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
After finishing this,
2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
5. Finally, run the setup program
Hope this will help you
Regards from Visit ExchangeOnline |
Visit WindowsAdmin -
Have an existing ex2010 sp3 organization.
Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line. I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
still get the same error. The error itself in the log is pretty useless:
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
[05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
[05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
[05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
[05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
[05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
[05/07/2013 01:19:40.0496] [0] Starting file's copying...
[05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
[05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
[05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
[05/07/2013 01:19:59.0762] [0] File's copying finished.
[05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
[05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
[05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
[05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
[05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
[05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
[05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
[05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
[05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
[05/07/2013 01:20:12.0044] [0] The following roles are installed:
[05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
[05/07/2013 01:20:12.0075] [0] Server Name=WEX1
[05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
[05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
[05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
[05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0841] [0] Applying default role selection state
[05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
[05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
[05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
[05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
[05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See
the Exchange setup log for more information on this error.
[05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:21:04.0154] [0] End of Setup
[05/07/2013 01:21:04.0154] [0] **********************************************Hi,
The cause is clearly described in the log:
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
I'd suggest you check NIC settings and AD configuration.
Hope it is helpful.
Fiona Liao
TechNet Community Support -
Windows Server 2013; Exchange Server 2013 with Cumulative Update 1
Cannot install Cumulative Update 3 for Exchange Server 2013. It fails with
[xxx] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Active Directory operation failed on . The supplied credential for 'XXX\Xxx' is invalid. See the Exchange setup log for more information on this error.
[xxx] [0] [ERROR] Active Directory operation failed on . The supplied credential for 'XXX\Xxx' is invalid.
[xxx] [0] [ERROR] The supplied credential is invalid.
(Crosses - XXX - replace original values.)
I have found that a few others have experienced the same problem but found no solution, nor could come up with anything myself. If it is any hint, Event 40961 was logged in the Event Viewer around the same time on almost all installation attempts to be purely
conincidental:
The Security System could not establish a secured connection with the server
ldap/xxx.xxx/[email protected] No authentication protocol was available.
Both Windows Server and Exchange Server otherwise work OK, and do not recall any issues with Cumlative Update 1 installation.Hi vhr1,
Based on my knowledge, the Event ID 40961 is a warning message.
This behavior occurs when we restart the server that was promoted to a DC. The Windows Time service tries to authenticate before Directory Services has started.
Found some resources for your reference even if the Exchange Version is mismatched:
http://blogs.technet.com/b/jhoward/archive/2005/04/20/403946.aspx
http://support.microsoft.com/kb/823712/en-us
About the error message, "Setup encountered a problem while validating the state of Active Directory: Active Directory operation failed on . The supplied credential for 'XXX\Xxx' is invalid."
The error message InvalidCredentials means: the wrong password was supplied or the SASL credentials cannot be processed.
Found a similar thread for your reference, hope it is helpful:
http://social.technet.microsoft.com/Forums/en-US/98e26ad6-8e43-4ef5-8ff9-e9fee6e76bda/bind-operation-is-invalid?forum=exchangesvrdeploylegacy
Feel free to contact me if there is any problem.
Thanks
Mavis
Mavis Huang
TechNet Community Support -
I have a script which displays locked out accounts. It works great.
I'd like to display the fully qualified Active Directory Login Name instead of the LastName, First Name:
Example: Davis, Susan
Want instead: Domain\Susan.Davis
I'd also like to include an additional filter to look for only Domain\Susan.Davis OR Domain\Robin.Givens
Here is my script:
$objDomain = New-Object System.DirectoryServices.DirectoryEntry
$objSearcher = New-Object System.DirectoryServices.DirectorySearcher
$objSearcher.SearchRoot = $objDomain
$objSearcher.PageSize = 1000
$objSearcher.Filter = "(&(objectClass=User)(lockoutTime>=1))"
$colProplist = "name","samaccountname"
foreach ($i in $colPropList){$objSearcher.PropertiesToLoad.Add($i) | out-null}
$colResults = $objSearcher.FindAll()
foreach ($objResult in $colResults) {
$domainname = $objDomain.name
$samaccountname = $objResult.Properties.samaccountname
$user = [ADSI]"WinNT://$domainname/$samaccountname"
$ADS_UF_LOCKOUT = 0x00000010
if(($user.UserFlags.Value -band $ADS_UF_LOCKOUT) -eq $ADS_UF_LOCKOUT) {
$objResult.Properties.name
John
JohnSorry, I should have mentioned that the cmdlets I'm using are part of the Active Directory module. You'll need to install the RSAT (Win7+) to use them.
If you'd rather stick with your DirectorySearcher methods instead of moving to the AD module, you can adjust your output by using something like this instead:
if(($user.UserFlags.Value -band $ADS_UF_LOCKOUT) -eq $ADS_UF_LOCKOUT) {
"$domainname\$($objResult.Properties.samaccountname)"
$domainname might not be what you're expecting, just FYI.
As for filtering, you can add to the if statement and check for your known usernames only.
Don't retire TechNet! -
(Don't give up yet - 12,700+ strong and growing) -
What is the concept of Active directory in HFM
Hi Experts
What is the concept of Active directory in HFM?
regards
DevHi Dave,
Not sure if this is your exact requirement... but might be helpful.
The concept of Active directory is that users can login to HFM application with the windows credentials. To make that work you should first need to configure.
Please refer the below link, page 23:
http://docs.oracle.com/cd/E17236_01/epm.1112/hss_admin_1112200.pdf
Hope this helps,
Thank you,
Charles Babu J -
What is the Point of Active Directory/LDAP Specification?
My college threw an interesting curve ball today and I couldn't give him a good enough answer. The question was simple 'What is the point of active directory'. Now I don't have a lot of exposure to active directory, but I thought I could easily answer. My argument was; If you have a group of objects its easy to look up attributes for those objects using active directory. For example, if you have a group in AD and you want to verify the users of that group you simply look up the member attribute of that group. However he argued, rightly so, that you can do that with a table in a database, why do that in AD. I couldn't give him a good enough answer and now I'm curious. Given the above example, why use AD over a database?
To me AD is a way to manage a set of resources, whatever they are, by mapping them to objects that have however many attributes. But we could do that in a database, whats the point of AD? Why do you use AD?I come from a primarily database centric background. Just like life experience, it casts a certain perspective on problems. Database people solve things with databases. Directory people solve things with directories. Everyone has their perspective. It's not really about who's right and who's wrong. It's about perspective because people are most likely to go with what's familiar when given a problem. It's easy to have this conversation in a educational environment but when you're on the job it's about turf, schedules and careers. My latest job (in which this debate comes up a lot) has been about directories which has been a very enlightening experience because I've been given a gift of perspective. I can put on the directory hat and look at it from another angle.
To get back to your professor's question. The answer is easy. LDAP (AD or other) is an application above a database. It has a data store behind it, in most cases we can just assume this is a database. So, in short, it's apples to oranges. But if we insist on comparing which makes the better juice, let's look at how we'd make a database like a directory. We could create a data model with an attributes table, an entries table and so on. We can deconstruct what LDAP data structures really are and implement each type as a table with FK/PK relationships and so on. It's sure to work because there are already so many products on the market doing this very thing. But think about the effort now. How are you going to add new users? A front-end? Stored procedures? Scripts? How are you going to keep someone from seeing things they shouldn't? You have to insert an object into all the right tables to ensure that your data is consistent and valid. In a pure database, you're trying to create ACLs on database rows. Now you're writing a full featured application with a lot of complexity. Given enough directory features, the database isn't going to be able to do everything without an external application.
What is the point of LDAP? It's got hierarchy, ACLs, group of unique names functionality and things that are a layer of abstraction above the data store. I love databases but if you start designing out a directory server from scratch you'll realize it's far beyond comparing a user.ldif to a row in a user table. They are similar in appearance but different types of software.
Edited by: milkfilk on Dec 16, 2008 11:48 AM
Edited by: milkfilk on Dec 16, 2008 11:54 AM -
Hi All,
I have a task, that is i want to retrive the details from active directory based on name and i want show that details into grid view.
Can any one help how to start.
Thanks in advance!Hi AnilKarthik,
You can get user details by name using DirectoryService namespace. Then you can create a DataTable to restore the information and then bind to the SharePoint GridView.
Here are some deatiled code demos for your reference:
how to get userdetails from Active Directory based on username using asp.net:
http://www.aspdotnet-suresh.com/2011/03/how-to-get-userdetails-from-active.html
How to get User Data from the Active Directory:
http://www.codeproject.com/Articles/6778/How-to-get-User-Data-from-the-Active-Directory
Using SPGridView to bound to list data in SharePoint:
http://nishantrana.me/2009/03/23/using-spgridview-to-bound-to-list-data-in-sharepoint/
Best Regards
Zhengyu Guo
TechNet Community Support -
We want to authenticate both a device (iPad) to our corporate WLAN, but after authenticating the device we would also like to authentiate the user in Active Directory if possible. Has anyone had any experience with this?
You need to make sure that the server sends the "GeoTrust DV SSL CA" intermediate certificate.
See:
* http://www.networking4all.com/en/support/tools/site+check/ (www.ucfs.net)
* https://knowledge.geotrust.com/support/knowledge-base/index?page=content&id=SO9557
* https://knowledge.geotrust.com/support/knowledge-base/index?page=content&id=AR1422 -
Help
I dont understand when i download a movie or tv series on my mac book air i get this error message after buying it! its iTunes while downloading a movie it say error please check that the connection to the network is active and try again what does this mean i have an internet connection !!!Hello.
Certain types of software can affect the way a computer sends and receives information from the Internet. This article may help you resolve the issue:
Information about error -50 and downloading videos
http://support.apple.com/kb/TS1583
If it did not work, contact iTunes Store via (http://www.apple.com/support/itunes/store/) and/or Apple Tech Support via 1-800-275-2273. -
How to list the files in a directory which are recently modififed few mins
Hi,
I need command to list the files in a directory which are modified few minutes ago in SunOS. like "find . -cmin 2 -print " which list files that are modified 2 mins ago in Linux platform.
Thanks in advance.
sudha85The find command that comes with solaris doesnt have the cmin operator. Only mtime whose option is days.
So install gnu find from sunfreeware which is the same one that comes with linux. -
how do I switch between windows in the same programme? I know that I can use Command tab, however this takes you through all of the programmes that I'm using. What I need to do is have a shortcut to switch between windows in the same programme. For example if I'm in Excel and have 5 windows open I want to be able to scroll between each window of Excel only with a shortcut.
Please help!Command and ~ keys to tab between open windows.
Technically it is the Grave Accent ` (aka reverse quote) under the tilda ~ key. Tilda ~ is shifted, and Grave Accent ` is not.
Command-Grave Accent -
I would like to create a wavy line (the zig zag feature is not exactly what I need here) to outline
I would like to create a wavy line (the zig zag feature is not exactly what I need here) to outline a shape and then fill it with a solid color. Any ideas?
This is approx what I want; however the undulation needs to be more round and less peakedBarbara,
If you wish to create a gap between the wavy line and the underlying object, you may:
1) Select the wavy line and Object>Expand Appearance;
2) In the Appearance palette flyout tick New Stroke, drag it beneath the original stroke and increase the Stroke Weight as desired and change the colour to white.
If you wish to make the gap transparent, you may:
3) Select the wavy line and Object>Expand Appearance and Ungroup;
4) Select the white path and the underlying object and in the Transparency palette flyout tick Make Opacity Mask with Clip unticked and Invert Mask ticked.
It may be done in other ways, too. -
I have CS6 and need to be able to utilize the open GL option but not sure what I need to do to make
I have CS6 and need to be able to utilize the open GL option but not sure what I need to do to make this work...trying to bring a 3D pdf into photpshop for animation. Screen simply reads "enable 3D view'.
my goal is to bring 3d solidworks drawing files into photoshop and animate. one export option is a 3d pdf file which opens and rotates well in Acrobat pro...but when trying to bring it into photoshop. It looks like the attached pic."enable 3d view"
-
hello - I have done a series of edits on premiere cs6 and now need to transfer info to the client overseas so I have to transfer the rushes and would like to know what I need to provide ( list...) regarding the edit done on the CS6 version - thank you
>I have managed to download the footage onto Picture Motion Browser
Isn't Picture Motion Browser available for Windows only? If so, why are you posting in an Final Cut Express forum? My apologies if I'm incorrect.
-DH
Maybe you are looking for
-
Replacement battery for dv6113us? part #432306-001(6cell) or 446506-001(6cell) or 432307-001(12cell)
replacement battery for dv6113us? part #432306-001*(6cell) or 446506-001(6cell) or 432307-001(12cell) I am trying to order the correct battery replacement - and that information is not on the bottom of the computer or on the lithium ion battery. I h
-
How to Perform Failover When GAP on Standby
hi , i want to activate my standby in read/write but i can't..i don't have archivelogs and i can't restore standby from incremental backup ALTER DATABASE ACTIVATE STANDBY DATABASE ALTER DATABASE ACTIVATE [PHYSICAL] STANDBY DATABASE (work) Begin: Stan
-
How avoid "AUD: OS Errors" after server restart
Hi, After restart my windows 2003 i'm receiving the next messages in my Oracle 11g R2 Standard Edition Be one alert.log file: AUD: OS Error = 31 encountered while writing audit record AUD: OS Error = 5 encountered while writing audit record AUD: OS E
-
Intercompany Billing with 3rd party
Hi, Can anyone help me in Steps of Intercompany billing with Third Party. Regards Amit Gupta
-
Link to Document in Collaboration Project?
You can use the link on doc properties in the doc dir of 4.5. That link will take you to said document. Can you do the same for a doc in a collab project??