To capture with Intensity HDMI, will I also need firewire cable?

I've got an Intensity card on the way and want to capture live video from a Canon HV20 to ProRes over a 10 meter HDMI cable.
I noticed on the BlackMagic site that it says;
Device Control: None. Use FireWire if capturing from HDMI cameras.
Do I also need a 10 meter FireWire cable - or can I just tell FCP6 to capture what is heading its way from the HDMI cable?

You only need a Firewire connection if you want to control your camera/deck from within FCP. If you do not have a FireWire connection then you will have to start and stop the camera/deck manually. Just make sure that you select the appropriate input and output modes for the Intensity card in the Utilities panel.

Similar Messages

HT2623 I currently have an email address with my cable company. In order to use the "@icloud" email addresses, do I also need my cable company email address?

I currently have an email address with my cable company. In order to use the "@icloud" email addresses, do I also need my cable company email address?

That's right, all you need is the actual internet connection. If you want to use the cable company email in addition it has no effect either way on iCloud, it's up to you.
When you sign in in System Preferences (or Settings)>iCloud (Lion 10.7.5. minimum required, or iOS5/6) and check 'Mail' in the list, you will be asked to create an @icloud.com address, and the account will automatically be added to the Mail application and set up. You can also access your mail at http://icloud.com

What is the best charging cable for the iPad Air (that is not made by Apple)? I need a long cable (over 6ft or more). I also need the cable to be of high quality and the cord part of the cable to be made of strong material.

What is the best charging cable for the iPad Air (that is not made by Apple)? I need a long cable (over 6ft or more). I also need the cable to be of high quality and the cord part of the cable to be made of strong material. Apple does not make one this long. Is there a cable out there that is sturdy like this and is safe to use?

yes, but I'm trying to use my iPad to type notes (using pages) and I have the smart case which I use as a stand. I need a cable long enough to fit through the back of my desk and the charging brick for the iPad won't fit behind the desk. I have to put it on the floor and then the apple cables aren't long enough to reach.

Premiere Pro CS5 not responding after 55 minutes of capture with intensity shuttle

Hi and thank you for the valuable resources on this forum.
I am capturing analogue video into Premiere Pro CS5 using he Blackmagic Intensity Shuttle (with Time Base Corrector in the video path). My captures are stopping at 54 or 55 minutes when the computer becomes non responsive. This has happened with the Blackmagic motion jpeg codec as well as the 10 bit YUV capture. Same thing happens if I capture with media express (the blackmagic capture software)
I have tweaked my system as per many of the recommendations in the forum.
Running CS5 5.03, autosave set to 10 minutes (same problem with no autosave or autosave at 20 minutes)
Windows 7 64 bit fully updated
i7 - 930 cpu
Gigabyte x58A - UDP5 (Revision 1)
24 Gb Ram
Nvidia 470 - MSI with the twin Frozr cooling solution.
Restore off, indexing off, windows search off,
Followed tips from forum and Viper regarding optimizing system
3 Hard drives
System on standard Sata 2 drive
Project capture to OCZ Vertex 3 120 g SSD drive (nice bit of gear) running on Sata 3 controller
Page file on another hard drive
Norton 360 unistalled
Anything else I could find unistalled or turned off.
Firmware and drivers for on board USB latest from Driver Station as per Blackmagic Recommendations.
Very succesful capture of things shorter than 55 minutes but I have some longer things I would like to capture in one go.
I have used process explorer to watch what happens. Nothing special that I can identify in terms of processes but cpu seems to be going to 100%.
With progessive tweaks the problems remains the same.
I am not aware of any file size limits with Premire Pro or Blackmagic - are there some?
Considering reinstall but would greatly appreciate any insights. My first post so I hope I have provided the right info to help you help me.
Thank you
Andrew

Good that you got it fixed... bridging device drivers have cause problems clear back to the computer version of the stone ages
I still have a Pinnacle Dv500 card (used via dual-boot with WinXP and Premiere 6x) that went through several device driver versions to get everything working right
While everything is working right... make a full "picture" of your hard drive to external USB drive to make recovering easy in case something goes wrong
Hardware crashes or virus infections happen, so you should buy software to make a full
backup of your hard drive to an external USB hard drive... plus, making step-by-step
backups during a new install or major program addition makes it easy to go back a step
if something doesn't work
This backup and then restore is, of course, only to the same computer with a new drive
(or the same drive as long as you don't mind writing over everything) since doing a
restore to a new computer won't work due to Windows and many programs having activation
information that is keyed to your hardware (which is why Windows will force you to RE-
Activate if you change very much hardware)
The product I use is at http://www.terabyteunlimited.com/image-for-linux.htm
Image runs off of a bootable CD via Linux (the Zip you download includes a program to
make the bootable CD) and it reads EVERYTHING on the drive, even the hidden
registration information, so everything is restored when needed... and you may restore
the image to a brand new drive in case of a crash, and not have to re-install anything
Please note that I own no part of Image, and I don't get a referral fee (that is just a
plain web link) but I use the program and it has saved me a LOT of trouble when I had a
hard drive die... and I was able to restore everything and not have to re-install or
re-activate a single program, from Windows on up

HT5219 How would I connect dual monitors and also a firewire cable? Macbook Pro (Retina)

Currently I am using two thunderbolt to DVI connectors for the dual monitors, but I am left without any firewire cable connection for my audio interface. THe only adaptor I found was another thunderbolt to firewire, but since I already used these two ports, I am left with no options. I haven't been able to find any usb to firewire cable connections.
Are there any other adapators/ports I can use that I am not aware of?

Something like this at US$300:
http://store.apple.com/us/product/HB865ZM/A/belkin-thunderbolt-express-dock?fnod e=58
Highlights
One cable output provides instant access to eight ports
Ability to daisy-chain up to five additional Thunderbolt devices
Includes Cable-management channel
One Gigabit Ethernet port
One FireWire 800 port
One Thunderbolt port
One 3.5 mm headphone output Jack
One 3.5 mm audio Input Jack
Three USB 3.0 ports*
[Click on this pictures to see it larger]

Will my 4-pin Firewire cable work?

I've jsut bought a new iMac and want to transfer data from my old one.
The old Mac is 24" Late 2006 model and has two different Firewire ports - I think one is 9 pin and the other 6 pin.
The new iMac has the the smaller 6 pin port.
I've just been to buy a suitable FW cable and have got a 4-pin one. (I'm at work and was unable to double-check the ports on the machine.
I understand that on a 6-pin cable, 2 of the pins are for power, not data, which suggests I don't need them for this data transfer.
Will this cable work? Will it even physically fit?
Thanks

You need a cable like:
http://www.amazon.com/Tripp-Lite-F017-006-Firewire-Hi-speed/dp/B000AAZQLI/ref=sr _1_1?ie=UTF8&qid=1343825119&sr=8-1&keywords=firewire+400+to+800+cable
You can find these at your local computer store, Radio Shack, Best Buy, or of course Amazon.

Peoplesoft Portal with Reverse Proxy, content provider also need RP?

Hello there,
I need your help, I am currently implementing a PS Portal, I set my CRM as content provider, for safety reasons public access portal is configured using a reverse proxy (rp), my question is: Is there a different option to configure the CRM also with reverse proxy? as static content generated by CRM are then shown through the Website Portal (already rp),
Thanks and regards.
Alexander C.

I also would like overcome this issue. I could not find an answer anywhere on Metalink or OTN.
Can a reverse-proxy (i.e. using ProxyPass & Reverse) be used with and internal Portal?
John Z
Butler Mfg. Co.
[email protected]

I have the Ipod Nano. I'm traveling to Australia which has the following current: 240V AC, 50Hz. I have a travel plug adapter for the Australian electric sockets. Will I be able to use my Ipod charger with an Australian travel plug adapter or will I also

I have the Ipod Nano. I’m traveling to Australia which has the following current:240V AC, 50Hz. I have a travel plug adapter for the Australian electricsockets. Will I be able to use my Ipod charger with an Australian travel plugadapter or will I also need a voltage converter? Australia which has thefollowing current: 240V AC, 50Hz.

I have the Ipod Nano. I’m traveling to Australia which has the following current:240V AC, 50Hz. I have a travel plug adapter for the Australian electricsockets. Will I be able to use my Ipod charger with an Australian travel plugadapter or will I also need a voltage converter? Australia which has thefollowing current: 240V AC, 50Hz.

DV Capture with Premier CS4

Getting typical field combing effects when viewing and capturing with premier CS4 capture screen on LCD monitor. Using Sony TRV320 into firewire with a four pin to 6 pin firewire cable. Previously used Premier pro 1.5 on another computer with same camera and 4pin to 4pin cable with no problems. Could the firewire card or cable be causing such problems or might it be premier CS4? Have tried all clip and sequence settings but they don't seem to affect the capture settings.
Thanks.

Thanks Jim for your answers and quick reply. The other computer I have must do something to the frames before sending them to the LCD monitor because there are no combing effects.

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv

HT4859 I have an iPhone 5 and have just set up the iCloud for it. I also have an iPad with different content and I also want to connect it to iCloud. Will I lose everything that's on my iPad or iPhone or do they sync together without losing anything?

I have an iPhone 5 and have just set up the iCloud for it. I also have an iPad with different content and I also want to connect it to iCloud. Will I lose everything that's on my iPad or iPhone or do they sync together without losing anything?

The problem is that all services are bundled with your Apple ID ([email protected]):
Your iCloud account (Mail, Contacts, Calendars, Reminders, Notes, Backups, etc.),
also iTunes & App Store purchases (Music, Movies, TV Shows, etc.),
and the iTunes Match services.
(I guess that all your devices - yours and your wife's are connected to one iTunes library, right?)
If you want that your wife gets her own iCloud account for Mail, Contacts, Calendars, etc. but gets also access to your media then you have two set up two things on her device:
iCloud (Settings > iCloud) with her account (e.g. [email protected])
and
iTunes & App Stores (Settings > iTunes & App Stores) with your account (e.g. [email protected]).
In this case she gets access to your library and could use the same iTunes Match account.
(See also: Using one Apple ID for iCloud and a different Apple ID for Store Purchases http://support.apple.com/kb/HT4895)

My podcasts will no longer sync with my ipod classic. Also when I tried to sync in itunes, the category "podcast" disappeared under my ipod listed in itunes.

My podcasts will no longer sync with my ipod classic. Also when I tried to sync in itunes, the category "podcast" disappeared under my ipod listed in itunes.

Are you sure your iPod Classic is configured to sync podcasts to your device? You'll want to double check by taking a quick look at your iPod's Podcast configuration tab in iTunes.
To access this tab, plug your iPod in and click on it from under the Devices section in the left hand pane of iTunes when it appears to bring yourself to the iPod's Summary tab. Now locate the Podcasts tab and select it. Under this tab you can configure how and what podcasts are synced to your device. If you make any changes, be sure to click theApply button in the lower right hand corner.
B-rock

Will apple tv work with a hdmi splitter of some kind ? TV only has 2 hdmi ports and both are in use

will apple tv work with a hdmi splitter of some kind ? TV only has 2 hdmi ports and both are being used .
If splitter will work any recomendations as to best type to use

The Hatter,
I am a novice at Mac so I read all I can. From what I understand the NEC monitors I bought require Display Port for their maximum performance. The GTX 680 only has DVI outputs. Difference from what I understand is larger bandwidth with the DP.
You said I have the 4000 for CUDA. I am not all that familiar with CUDA and when I do read about it I do not understand it.
A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000. Is the 4000 doing anything with nothing connected? I read where in a PC system the 2 cards would interact but in a Mac system they do not.
Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are. I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4. Those NEC monitors are supposed to be top notch.

Will Apple tv ONLY work with an HDMI connection on the tv?

My television has one HDMI port and it is connected to my Bose setup. If I get an Apple TV, will that also have to be connected to the same HDMI port? Or, can it work connected to the "old fashioned" video and audio ports?

The 2nd and 3rd generation Apple TV need a HDTV to be used, so you need a HDMI port on the TV to connect the Apple TV

IPad 1 will it stream Netflix with the HDMI adaptor?

Will IPad 1stream Netflix with HDMI adaptor? In HD.

i believe it will play with the hdmi cable and all the out put cables
but not 100 % sure about HD video, i would imagine so, its so hard to find real hd video on netflix, computer hd content can be different from set top box hd content.
the one thing that netfix won't do is play over airplay they won't support it

To capture with Intensity HDMI, will I also need firewire cable?

Similar Messages

Maybe you are looking for