To change profitcenter in accounting document at line item level

Hi guru's,
I have a requirement that i need to change the profitcenter value in the accounting document based on the G/L number and reference key number when i am releasing the billing document number through vf02.
i tried in many ways but i am unable to achieve this...
Please help me in this regard.
Thanks & Regards
Sastry

Please see [note 1057713|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1057713]
Rob

Similar Messages

How to change the posting date at the line item level in a sales order

how to change the posting date at the line item level in a sales order

Hi,
I believe the POSTING DATE will appear on the accounting document
In the Accounting document, the posting date will be based on the Billing date.
Please let me know if you need any more details
santosh

Cancel down payment Invoice and accounting document without lines item

Dear masters,
I have a problem with down payment invoice cancel. As you know when doing invoice down payment request, after release to accounting, the accounting doc will have special G/L indicator is F (noted item). And when I cancel this billing down payment and after release to accounting, the accounting doc of cancel invoice will not have any lines item. Now I want to have lines item for cancel down payment, how can I do that? I really appreciate your support!
Regards,
Nguyen Pham.

Dear Nguyen,
As i understand your process you created Downpayment Request from SD.
Then created Downpayment with reference to that request.
Then you generated Billing invoice and released to accounts.
After that you cleared the downpayment with the Billing document.
Now you want to cancel all this.
First cancel the downpayment by FBRA reset and reverse.
Then cancel the billing document.

Change G/L Account for PO Line Item in BAPI_INCOMINGINVOICE_CREATE

Dear Experts,
I believe this BAPI BAPI_INCOMINGINVOICE_CREATE has been brought in question many a times.
But really after a lot of research also I could not find the exact solution to this problem.
The BAPI works all good. I am posting a Invoice Receipt successfully.
--> The problem is, it posts PO Line Item with posting key for Costs i.e. '81' and GL account from PO (suppose '111111').
When I post the same document via MIRO manually, it considers the default GL account for GR/IR (suppose '999999') and the Posting Key is GR/ID Debit '86'. (Configured via OBYC as SAP std.)
How do I enable BAPI to use GR/IR G/L Account '999999' when posting Invoice.
Just for Information :
- The PO is NEITHER goods-receipt-based invoice verification NOR non-valuated GR.
- I tried populating Accounting data Table but it does not accept different GL account num there.(Forces it to be '111111' ).
- Also the Itemdata Table has field for mentioning GR, but allows only for GR-based IV.
Any help in this regards will be great.
Thanks a lot in advance.

Issue Resolved on my own ....
The debit credit indicator on PO Line Item should not be touched and the G/L Account line item Debit Credit Indicator must be Credit. It fixes the problem.
Edited by: Durvesh Shinde on Jun 17, 2009 7:08 PM
Edited by: Durvesh Shinde on Jun 17, 2009 7:08 PM

How to fill Long Text in Accounting document in the item level.

Hi,
I need to fill Long Text field in item level of accounting document from the header texts from Billing header(say billing instructions)
I checked the user exit EXIT_SAPLV60B_008 but it didnt worked in my case. I have read the billing instructions in the Billing header using FM READ_TEXT but I am not able to save this text using FM SAVE_TEXT because for the field Long Text the parameter TDNAME is a concatenation of BUKRS(COmpany code) BELNR(Accounting doc. no.) GHAJR(fiscal year) BUZEI(line item) .
But I am not able to capture this accounting doc. number in the mentioned user exit instead I am getting Sales Invoice number and hence not able to give TDNAME parameter for FM save_text.

Hi Amit,
In application area FINANCIAL ACCOUNTING , go for node LINE ITEM. Here create a step & maintain the prerequisite as per your requirement & in the check you can mention the code or you can direct it to a custom program like ZFI_RGGBR000.
Here while maintaining the check you will get structures BKPF & BSEG in which you will get the desired field you are looking for.
Just try to explore in your system how the other validations are maintained.
After you are done with all your code, you have to run the regeneration program RGUGBR00.
Here utmost care should be taken while running regeneration program, you should select all the checkboxes in the selection screen except GENERATE SETS, GEN SUBSTN ROUTNS IN ALL CLNTS & TRACE PROG. GENERATE CALLS .
Hope this make your doubt clear.
Regards
Abhii

Changing ship to address at line item level in CRM order

Hi All,
Is it posible to change the ship to address at line item level in CRM order either at the time of order creation or order change. if yes please let me know if we need to do any settings for this.
Thanks in advance.
JM

I agree with the previous comment, Please go to the Partner Determination procedure attached to the Transaction and in the partner functions associated with the that procedure, find Ship-to-Party and there will be a check box to "make it changeable" once determined. Check that and save it.. You should be all set
Thanks
Raj

Change the Invoice accounting document type RV to some other

Dear Friends,
I need to change the Invoice accounting document type RV to some other, how can I accomplish this
Kind Regards
Ravi

You want to change the doucment type after you have posted the document, you can do so, by following config
IMG . Financial aaccounting > Financial aaccounting basic setting > Document > Rules for changing document > Document change rules document header.
If you are posting through FB60, you can go to EDITING OPTION once you are in FB60 screen. And under Document type option, select Entry with short name
Thanks
ROn

New contract account for every line item in subscription order....

Hi Guys,
I am having a problem with the subscription order.
Whenever I change the subscription order and add a line item to it, SAP by default creates a new contract account for that line item. Whereas I want to assign the same contract account to the second line item also.
Can you suggest me any solution for this problem?
Thanks in advance...
Regards,
Abhay

Hello Abhay,
This is the normal and correct function for SAP. If you would like for the subscriptions to be on the same contract that you subscriber has, an enhancement has to be developed.
We had a similar requirement and an enhancement was developed per specifications.
Regards,

Can change the price in the PO line item

Hello experts,
I have this Purchase order document where I can change the price in the PO line item(ME22N) where as in the other PO that I have created, changing the price in ME22N is not possible(shaded). They are all the same document type and plant combination. For the PB00 condition type configuration, It is set to D- not possible to process manually.
Please help.

Thanks for your answer. Yes i am aware of that, basically the settings is what the price indicated in the info record and as long it is included in the validty periiod then when you create the PO, that price will be detected by the system. i am clear for that, my issue is why there are some materials that i can change the price in the PO directly while the others are the pricing tab is disabled(cannot change the price)
Settings in the SPRO-MM - PURHASING- CONDITIONS-DEFINE PRICE DETERMINATION PROCESS- DEFINE CONDITION TYPES PB00 is D(NOT POSSIBLE TO PROCESS MANUALLY) but stilll the system is showing some PO's that can be changed the price

RV document posting line item wise in FBL5N tcode

Dear Experts,
I had posetd the Invoice to accounts with 3 line items. While checking the FBL5N report the Rv doument no is displaying 3 items i.e. repective line item wise prices are displayed. But my requirement is i want to check the doument wise i.e. all line items rolling up to singlke price. How to achied this.
Regards
abhi

Hi Lakshmi,
We are using ECC 6.0 Version i am unable to find the path as per your reply wherein Perform Document Summarization for Sales and Distribution is available in PERIODIC PROCESSING> Integration> SD. But what settings needs to be done when i check the Perform Document Summarization for Sales and Distribution system is asking for Ref Transaction and when i check Billing document header it is in display mode with New Entries required.
My requirement is i am posting a Invoice with 2 line items ( service related Billing). Please find the below report in FBL5N
6700147 6700147 RV 22.07.2009 22.07.2009 123.00
6700147 6700147 RV 22.07.2009 22.07.2009 222.00.
But the accounting document No is same. i need one A/c No 67000147 and the total amount has 345.
Regards
jayanth

Change company code based on profit center at line item level in FB50

Hi All,
Following is my requirement, would be thankful if anyone can provide inputs on the same.
When posting documents through FB50, In line item table control company code column gets un-editable ones correct entries are entered for that line. But after this if we want to change the profit center which belongs to different company code system throws error and makes company code column un-editable. In this situation there is no option left for user to correct the values unless he deletes the current line and creates a new one.
Here can we make the company code field always editable?
If not can we update the company code based on the profit center entered on that line item?
I looked for exits but couldn't find any, validation and substitution are also not working because error message thrown by SAP is getting triggered before the substitution or validation code is executed.
Please drop in your comments/inputs.
Thanks in advance.
Lucky.

Transaction Code - FB50                     G/L Acct Pstg: Single Screen Trans.
Exit Name           Description
RFAVIS01            Customer Exit for Changing Payment Advice Segment Text
RFEPOS00            Line item display: Checking of selection conditions
RFKORIEX            Automatic correspondence
SAPLF051            Workflow for FI (pre-capture, release for payment)
F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002            FIDCC1: Change IDoc/do not send
F050S003            FIDCC2: Change IDoc/do not send
F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006            FI Outgoing IDoc: Reset Clearing in FI Document
F050S007            FIDCCH Outbound: Influence on IDoc for Document Change
F180A001            Balance Sheet Adjustment
FARC0002            Additional Checks for Archiving MM Vendor Master Data
FEDI0001            Function Exits for EDI in FI
No of Exits:         14
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal

Partner Function Address change at line item level - Item Partners checkbox

Hi guru, we have a requirement that we need to change the address for partner function at line item level without changing the partner number. Currently the ship-to partner function address is automatically coming from the header although the number is modifiable but not the address (when double click into the partner number, the pop-up is grayed out). It is probably because the Item partner check box for the shipto partner is not checked (field name: SD_PARTNER_POSFLAG). However that field is not modifiable in VA02 either.
If the shipto partner number is overwritten, then the item partner check-box is automatically checked and allows address chanage. Is there a way in the configuration that can default the 'item partners' checkbox for certain partner so the address can be changed without the need to overwrite the account?
Any advice is appreciated.
Thank you.

If the item level ship-to party is derived from header partner function, but you want to change the address at item screen rather than header level. On item screen, enter the same function, the same number again in a new line, "item partner SD_PARTNER_POSFLAG" is then ticked. Then proceed to the address change.
No need to do modification.

Report at line item level but also for document total for once only

Dear all,
seek for your help for the following issue
There is a A/R invoice with 3 items
There is a report for retrieving the line item level data from inv1, user would also like to add a column to display the Document total , but the problem is, each line item will also display the Document total, any method to only display the corresponding Document total for once only?
Example, for AR invoice number 1234567:
Currently:
No.                ItemCode        Price      Qty    LineItemTotal      DocumentTotal
1234567       Item-A            10           1       10                       100
1234567       Item-B             50          1       50                       100
1234567       Item-B             20          2       40                       100
Requested to be presented as:
No.                ItemCode        Price      Qty    LineItemTotal      DocumentTotal
1234567       Item-A            10           1       10                       100
1234567       Item-B             50          1       50
1234567       Item-B             20          2       40
Thank you very much!!!

Hi,
Try This.....
select T0.DocNum ,T1.ItemCode ,T1.Price ,T1.Quantity ,T1.LineNum ,case when T1.LineNum ='0' then T0.DocTotal else 0 end    from oinv T0 inner join INV1 T1 on T0.DocEntry =T1.DocEntry where T0.DocNum=[%0]
Thanks
Shafi
Edited by: shafi_sunshine on Oct 19, 2011 12:50 PM

Create delivery document for line item 5 only manually

Hi Sap Experts,
We have scenario, we have created sales order with 10 line items while creating delivery we don’t want to show all the 10 line item to delivery creator (creating delivery manually).
We will send him mail saying that create delivery document for line item 5 and we will provide him material number and delivery date and shipping point with sales order number.
We don’t want to use partial delivery option that split the delivery and we don’t want to use VL10C tcode also.
What are options we have and how to customize this scenario?
Kindly suggest.
Regards,
Kotli

Can you be clear in your requirement?
One requirement is user should not select line items other than the one instructed to them
The other requirement is delivery split should happen based on item category
If your requirement is first one, you need to go with user exit USEREXIT_MOVE_FIELD_TO_LIPS in include MV50AFZ1 but I am not sure, on what logic, coding to be included in this exit. If your requirement is second one, then just try in your system and share the outcome how system is functioning. You will come to know how standard SAP works.
G. Lakshmipathi

Table to link FI document number, line item and pricing condition type

Hi,
I am looking for tables to link the FI document number, line item and PO pricing condition type.
Appreciate any help on this.
Thanks.

For any PO in ME23n in which Goods receipt has happened, you can check in the itemdetails->Po history tab in ME23n.
Here you will find the material document number. Just click on the material document, it will take you to anpther screen here you will find a button for FI document.
Click that button for FI document. In PO history istelf you can see the Condition types.
Hope this helps.

To change profitcenter in accounting document at line item level

Similar Messages

Maybe you are looking for