To Change PSU or not

Hi All
I am using a Zebronics PSU, the ratings are as below:
230VAC 50-Hz MAX Power output:400W
3.3 (28A) 5v(40A) 12V(17A)
I am thinking of buying an ANTEC  TRUEPOWER 430W or 550W, please let me know whether I should go ahead and buy an ANTEC or whether My existing power ratings are good.
Thanks
Roger

Hi All
Thanks Guys for all the suggestions, I am buying a new Antech True Power 550W PSU. It does cost me a fortune (the price of the PSU = AMD+MSI+Geforce) but I think it is worth it and I wouldn't repent spending on it.
As far as Raven's suggestion of considering EnerMAX, I did consider EnerMAX but I don't have dealers in India, in fact there were no dealers for Antec as well but somehow with the help of Antec I did manage to find one.
One more thing which I want to share with u guys is that in India people don't give much importance to PSU's, they use whatever comes with the case. But I have been into computers long enough to understand the need for a good PSU and also thanks to u guys and the sticky threads some amount of info is going into my brains and  now I can share this knowledge with people around me.
Thanks again
Hope to share and spread the Knowledge and keep gaming........  
Long live Far CRY and Unreal tournament.......  
Roger

Similar Messages

  • ON CHANGE OF is not working for the below case

    Hi,
      I had a problem with ON CHANGE OF as below
    select * from vbap into gt_vbap where vbeln in s_vbeln.
    loop at gt_vbap into ls_vbap where posnr ne '00010'.
       on change of posnr.
       endon.
    endloop.
    in gt_vbap i have only items 10 & 20 for a Sales Order No so in loop on change of is not triggering because remain line item 
    is only 20.
    can anyone explain me how to solve it

    You need not use ON CHANGE OF....
    Try using this code:
    SORT gt_vbap by posnr.
    Get the index of record
    READ TABLE gt_vbap into ls_vbap with key posnr = '00010'
                 transporting no fields binary search.
    if sy-subrc eq 0.
      l_index = sy-index.
    Read from next line
    add 1 to l_index.
    Loop at internal table from next line after posnr = '00010'....
    loop at gt_vbap into ls_vbap from l_index.
    Write your logic in this loop
    endloop.
    endif.
    Regards,
    Santosh

  • SAP CRM 7.0 WebUI: change history is not working

    Hi specialists
    Our change history is working - but only in SAPGUI.
    I found no way to activate / customize it for the WebUI. The corresponding Assignment Block is simply blank.
    On the other hand - in the SAPGUI its working like it is mentioned to do.
    But it is getting better:
    On our test system its working even in the  WebUI.
    On our prod. system not.
    Does somebody of you have any advices/hints for me?
    With best regards
    Thomas
    System:   SAP CRM 7.0
    2-Tier (test and productive system)
    Problem occurs only on productive system in WebUI

    Hi,
    We are facing same problem for change history on webIC except that all changes to
    business partner are visible only changes to contract account are not coming in change history.
    for e.g if we changed incoming payment method using tcode CAA2 on ISU change is replicating
    on CRM but change history is not showing changes made to incoming payment method.
    i have already posted question but got no reply's
    [change history is not updating on CRM webIC 7.0]
    Following are the components & views which are being called for change history functionality on WebIC.
    Component :
    BP_HEAD
    BP_DATA
    View :
    BP_HEAD/BPHEADOverview
    BP_DATA/AccountChangeHistoryOV
    Above view's are as per SAP standard and not modified or enhanced by us.
    Thank You,
    Sidh

  • I set up iPhoto v9.6 to copy items to library. Now I would like to change it to not copy. Do I have to start completely over? I have 106GB of photos and tags in my library. Will I lose all that work?

    I set up iPhoto v9.6 to copy items to library. Now I would like to change it to not copy. Do I have to start completely over? I have 106GB of photos and tags in my library. Will I lose all that work? Originally I thought by copying items to library I would be making an exact copy of my originals and that would serve as a duplicate or backup copy. My originals are on my EHD#1 and my iPhoto library is on my EHD#2. But now I realize that I can not view my iPhoto library unless my EHD#2 is connected to my computer (duh!!) So now I would like to NOT copy times to library and I want to have the library in the Pictures folder on my laptop HD. So I guess my question is do I have to start completely over? Is there some way to salvage all the work I've done so far?

    Yes you would have to start over from scratch.
    But you should really think this through very carefully. Experienced users do not recommend iPhoto used in this mode, and with very good reasons. Among them
    1. It's more work for exactly no gain
    2. It's unreliable - especially - when the library is on one volume and the photos are on another. One change to the path between the files and the library and you'll be reconnecting every photo in the Library back to the database, one by one.
    For more on iPhoto and file management see this User Tip:
    https://discussions.apple.com/docs/DOC-6361

  • Change Pointers are not getting populated in BDCPV table.

    Hi All,
             I am trying to create IDOC for Activity type master - KL02 through change pointers. For that I have done following things.
    Message type - COAMAS
    1. Created Custom message type - WE81 - ZIN_COAMAS_TCSMOBILE
    2. WE82 - Config for Mess Type and Idoc type combination
    3. SCDO - Checked object type LSTAR and have required tables in that object.
    4. BD61 - Activated Change pointers - Generally.
    5. BD50 - Checked Active for ZIN_COAMAS_TCSMOBILE
    6. BD52 - Added fields for I want to create Change pointers
    7. BD60 - Message type and ref Mesage Type and function module config.
    8. BD64 - Created distribution model for my Message type
    After doing all this settings the change pointers are not getting created in BDCP and BDCPV tables.
    Note - The entries are going in CDHDR and CDPOS table for activity which i change through KL02 for class LSTAR
    Can anybody figure out what need to be done in this case?
    Regards,
    Gautam Joshi.

    Hi All,
              Solved the problem myself.
              In BD52 I have given
              LSTAR               CSLA         KOARS
              LSTAR               CSLA         LSTAR
              LSTAR               CSLT          KTEXT
              Here the data of activity are stored in TCLA and TCLT tables. So intially while doing config in BD52 I have given TCLA and TCLT table names.
              But I debugged the KL02 and found that change pointers are not created for TCLA and TCLT table. further looking into CDHDr and CDPOS table I found that for COAMAS message type in these two tables table name was CSLAB.
    CDPOS entry
    LSTAR                        
    3166442                      
    119512890                    
    *CSLAB*                        
    2003166442   2400123120000101
    KTEXT                        
    U                            
    --> BUT CSLAB is structure.
    After putting these entry in BD52 the problem solved.
    LSTAR     CSLAB     KOKRS
    LSTAR     CSLAB     KTEXT
    LSTAR     CSLAB     LSTAR
    Regards,
    Gautam Joshi.

  • Pages is not saving document correctly.  After saving the changes either do not appear or you can not open the file. The error is "not a valid format"  I am in Pages '09 4.1 (923).  I also use Parallels.  Anyone having similar issues?

    Pages is not saving document correctly.  After saving the changes either do not appear or you can not open the file. The error is "not a valid format"  I am in Pages '09 4.1 (923).  I also use Parallels.  Anyone having similar issues?

    I'm not sure that Lion AutoSave feature apply to network servers.
    I'm just sure that the Versions feature doesn't.
    Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My Box account  is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
    My iDisk is : http://public.me.com/koenigyvan

  • Change document log not created for customer in Batch input/BDC

    Hi Guys,
    Change document log is created when you manually change the customer using XD02 but when run the Batch/BDC the values are Changed but the change document is not created.
    Please someone can give me some hints?
    Luca.

    Any update guys????
    Regards,
    guru singh

  • "change" button is not visible in check status ?

    HI,
    We are under upgrade of SRM 4.0 to SRM 5.0 . In SRM 4.0 "change" button
    is visible in check status even if shopping cart is under approval
    state.
    But in SRM 5.0 "change" button is not visible in check status if
    Shopping cart is under approval state.
    for this i have raised OSS message. SAP replied that "please increase the security level of the buyer from 1 (= no changes
    allowed) to at least 2 (=low)."
    please let me know where exactly i can change this settings?
    Thanks
    Venkatesh P

    Hi Venkatesh,
    Steps :
    1) Go to SU01 of the buyer
    2) Go to Personalization tab
    3) Double click on Personalization object key 'BBP_WFL_SECURITY'
    You will get a pop up for 'Authorization level for Authorization'
    4) Here change the securtiy level from 1(=no changes allowed) to at least 2(=low)
    <b>Reward points for helpful answers</b>.
    Regards,
    Andy

  • TS3992 Changes to my notes, contacts, etc., on my iPhone are not updating in the Cloud after back up

    I upgraded to iPhone 5 but when I back up the Cloud (both wifi and plug-in), changes to my notes, contacts, etc., that I've made on my iPhone are not updating in the Cloud

    Hi Gorm019,
    If you are having issues with Photo Stream, you may find the following articles helpful:
    iCloud: My Photo Stream FAQ
    http://support.apple.com/kb/ht4486
    iCloud: My Photo Stream troubleshooting
    http://support.apple.com/kb/ts3989
    Regards,
    - Brenden

  • 0CML_DELTA : Change pointers are not active

    Hi All,
    I have successfully did the delta init without data transfer for datasource 0CML_DELTA and 0CML_DELTA_CAP. Now, While trying to load delta, I am getting an error "Change pointers are not active" for both the datasource 0CML_DELTA and 0CML_DELTA_CAP.
    The position datasources are fecthing 0 records.
    I have activated the change pointers in BD61, even though I am getting the same error.
    Anyone faced the similar issue or have any clue about the problem.
    Thanks in advance,
    Pravender
    Edited by: Pravender on Sep 30, 2010 11:09 AM

    I resolved it. I was activating change pointers in BD61. But fot CML we need to activate in SPRO--> SAP Banking --> Loans Management --> Basic settings --> Installation parameters ---> Define general installation parameters.
    Then it will work.
    Pravender

  • My problem is simple: my recently changed Password does not work

    my problem is simple: my recently changed Password does not work

    Flash Player doesn't require a password so it's not as simple as you make it out.
    Where exactly are you being asked for a password , and for what?

  • I'm a Canadian wishing to publish interactive books for both the Canadian and US markets. However, I've heard that Canadians would/do not have access to these interactive textbooks. Has this changed? If not, is there any indication that it will?

    I'm a Canadian wishing to publish interactive books for both the Canadian and US markets. However, I've heard that Canadians would/do not have access to these interactive textbooks. Has this changed? If not, is there any indication that it will?

    US only at this time.
    Apple doesn't discuss future plans, sorry.
    As always, feel free to use the 'Provide iBooks Author Feedback' menu item for features you'd like added in the future, etc.
    http://www.apple.com/feedback/ibooks-author.html

  • I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resoluti

    I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resolution, to no avail.
    David.

    Paragraph breaks are good for readability. ;-)
    Have you noticed any difference between your MacBook and others at the Apple store? Wondering whether this is a configurable setting at the system level, i.e., DPI.
    You can default Firefox to a larger zoom level to avoid having to zoom every page. You'll still be able to adjust the size for individual sites as needed. It sounds as though you are aware of these add-ons:
    * Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    * NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
    There are some discussions about changing coming in Firefox 22 (I think) to address higher density displays like the Retina display. So perhaps there will be a built-in setting to address this in the future.

  • HRMD_ABA change pointer trigger not work for info type changes

    Hi,
      In change pointer for message type HRMD_ABA Certain changes to HR records like adding activity types to infotype 315, changing dates to infotype 0001, 0105 and 315 and adding/changing/deleting are not woking through change pointers.
    We are are replicating those changes through RHALEINI program, so can anyone let me know how to customize in case of adding this info types to trigger automatically through change pointers.
    Thanks,
    Marai

    Hi,
       Then check for change document created or not, if created then use SWEC  to  link it

  • Handling Unit Change Document does not exist

    I have created a Handling Unit and made changes to the Handling Unit. When I go into HUMO > GOTO > Chnge docs, the screen is blank. Further to this if I display the status of the Handling Unit, the change documents is not ticked. Basically, I would like to see all change documents relating to a Handling Unit. Your assistance is appreciated. Txs Poobie

    Hi,
    You've checking the @ correct place to see Change Documents but why you're not able to see those ?
    Are you sure that you've changed HU?
    Check if any 'Data Changed' exists in Tab-General Info of HU. If any Changed  Date & By exists, then it should display in Change Docs.
    Revert back.
    Regards,
    Anup

Maybe you are looking for