To change the defaults headings/parts' values in a FSG Report

Hi,
I m making FSG reports in Oracle 11.5.10.2.
The default headings Like "Corporate set of books" on the top of the reports page or the "no company requested" at the upper left position are required to be removed or changed. But i m not finding a way to do this.
Is there any idea????
thanks.

Yeah Sunil !!
you can't make reports without columns and column headings are the must in most of the cases. But i m talking about the fix and defaults parts that are there for each and every type of report. So any help in this regard is required.
Thanks.

Similar Messages

Changing the default .name property value for data object

Hi.. I'm rendering a pdf form with attachments through Java APIs. When I attach a file, the .name property (cName parameter) is assigned automatically. I want to attach a file by specified name because I'm tracking these attachments later on the form, is there any way I can do it?
Thanks in advance.
Sunaif

What api are you using?
Can you post a few lines of code?
Jasmin

How can I change the default value of a command ?

I want to be able to change the default value of a comand when the vi
is running. (I know how to do that with a right click when the vi is
not running).
In fact I would like the user of the vi to be able to choose a new default value for a command.
How can I do that ?

You can't do this on a running VI. If you have an idle VI, you can open a reference to that VI and use an invoke node with the Make Current Values Default method, but that will only work in LV (i.e. not in an EXE) and will affect all the controls. What you can do is save the values to a file and load them when the program starts. OpenG's File I/O package includes some VIs which will help you with that.
Try to take over the world!

Changing the default value of "Items Due" in iProcurement 11.5.9

Is there anyway of changing the default value of 'Today' that appears in the Item Due field when doing an expanded search on Receive Items? We would like this set to 'Any Time' which is more useful to us.
Is there anyway of changing the default value of 'Today' that appears in the "Requisition Created" field when doing an expanded search on Requisitions in iProcurement? We would like this set to 'Any Time' which is more useful to us.
We are on 11.5.9
Thanks in advance...
Regards,
Sajid

You should be able to do that, read my reply on this thread below on iProcurement page customization in 1159.
Adding item to exiting AK Region
Thanks,
Tapash

Do you change the default RAW conversion settings?

I have used Sony (and formerly used Panasonic MFT) cameras (a900, a850) for two or three years and never had any reason to change the default RAW conversion settings. Five weeks ago I started using Sony's new a77, and for the first time am not satisfied with Aperture's default RAW conversion. (I recalibrated all my monitors -- twice -- thinking that something in my color workflow had got busted.) The default a77 RAW file conversion results in an overly-saturated, "Disneyfied" picture. I have found that by sliding "Boost" almost to zero, and cutting "Hue Boost" by half, I end up with a much more life-like, atmospheric, picture -- and one that closely matches the default rendering of RAW files from the a850 and a900.
1. Do you change the default RAW conversions settings? Why?
2. To what units, specifically, do the scales of these controls refer?
3. It seems that Hue Boost provides a range of settings that corresponds to the print settings "Perceptual" (= zero hue boost) to "Relative Colorimetric" (= full hue boost); does that make sense?
The User Manual, as usual, provides a solid concise explanation of the RAW Fine Tuning Brick.
Any experience you can share is appreciated. Thanks.
(Added:
(It seems conceptually wrong to me to have these controls be part of the RAW converter. Are there other adjustments in Aperture that do the same thing?)
--Kirby.
Message was edited by: Kirby Krieger

William -- many thanks for your help. I will almost certainly change the default for my a77 (as well as for the Nex-7 I used for a week).
Are there is any other adjustments mathematically similar to the "Boost" or "Hue Boost" sliders in the RAW Fine Tuning Brick? I ask for two reasons:
- Mostly I'm just trying to figure out what they do, and strengthen with knowledge my quiver of Aperture effects. According the the User Manual, they change the overall contrast, and the amount to which the hue is changed as the overall contrast is increased.
- In practice, it makes sense to me to have the RAW conversion produce the "flattest", least "effected" image possible -- to leave _aesthetic_ adjustments to me. I don't want to use the RAW Fine Tuning controls as part of my workflow; I want to know how to get the same increase in contrast and control of hues using other adjustments (that, specifically, don't require de-mosaic'ing). Apple seems to indicate that the use of the RAW Fine Tuning controls may be the best approach:
For images that consist of saturated primary and secondary colors, such as an image of flowers in a lush garden, shifting the hues to their true values has a desirable visual effect. However, this is not visually desirable for images containing skin tones.
The implication is spelled out in the sentencesthat follow: use the max setting for flowers, and the minimum setting for portraits. Isn't it odd that this recommendation is left to the RAW converter, and is buried deep in the User Manual?

How to change the default currency in CJ32 and CJ33

Dear all,
As required by the user, I want to know how to change the default currency from controlling area currency to object currency in TCODE CJ32 and CJ33. Currently, the controlling area currency will be defaulted in the field "Views in".
Could any one help me? Points will be awarded.
Thank you.
Christina.
Edited by: Virendra Pal on May 5, 2010 8:34 AM

Hi Christiana ,
Once you are in tcode CJ30 / CJ32 , Enter either Project definition or WBS element and this shall take you to the Budget screen and once you are here you can find a drop down with two options .One is Controlling are currency and the other one is Object currency.
Since the Currency is set to Object currency in OPS9, System shall allow the budget values in Object currency and if the user wants to see the same values in Controlling are currency ,then the user needs to view the values in Controlling are currency using the drop down .
Regards
Judy

How to change the default port of webdispatcher

Hello Everyone,
We wish to know to how to change the default port of SAP webpatcher port from 81$$ to 80.
Appreciate your response.
Thanks,
Vadi

Hello Vadi
you have to change the PORT value in your profile parameter from 81$$ to 80
icm/server_port_0 = PROT=HTTP,PORT=81$$ to
icm/server_port_0 = PROT=HTTP,PORT=80
Also, in SMICM, then change http service port and activate it and above parameter will require SAP restart
$$ is used generally to accomodate multiple port services running in SMICM and so as to avoid the parameter setting according to instance number of any system.
thanks
Bhudev

How to change the default language of form9i?

How to change the default language of form9i? For example, change the language from Spanish to English.
Regards!
Gerald

Hi,
set the NLS_LANG parameter and make sure the language supplement classes got installed when installing the deesigntime or server. If you need to change the language for runtime, set the value in the default.env file - assuming its a web based appication
Frank

How to change the Default Password on AP1131AG

Hi all :
I tried to change the default password Cisco to other by command line but the password cannot work out.
The command line I used are as below :
AP#conf t
Enter configuration commands, one per line. End with CNTL/Z.
AP(config)#enable pass
AP(config)#enable password 4dMINO123 ?
LINE    <cr>
AP(config)#enable password 4dMINO123
AP(config)#exit
AP#wr
*Mar 1 04:39:23.902: %SYS-5-CONFIG_I: Configured from console by console
Building configuration...
[OK]
AP#exit
This still cannot cahnge. Below I do again below commands :
AP(config)#enable secret
% Incomplete command.
AP(config)#enable secret ?
0      Specifies an UNENCRYPTED password will follow
5      Specifies an ENCRYPTED secret will follow
LINE   The UNENCRYPTED (cleartext) 'enable' secret
level Set exec level password
AP(config)#enable secret 5
% Incomplete command.
AP(config)#enable secret 5 ?
LINE The ENCRYPTED 'enable' secret string
AP(config)#enable secret 5 LINE
ERROR: The secret you entered is not a valid encrypted secret.
To enter an UNENCRYPTED secret, do not specify type 5 encryption.
When you properly enter an UNENCRYPTED secret, it will be encrypted.
AP(config)#enable secret LINE
AP(config)#exit
AP#
*Mar 1 04:40:53.021: %SYS-5-CONFIG_I: Configured from console by console
AP#
AP#exit
After that when I access with >en again as below with correct password of 4dMINO123 and it always fails as below :
Can anybody help to provide correct way of changing the default password of Cisco to another password? Many thanks!
AP con0 is now available
Press RETURN to get started.
AP>en
Password:
Password:
Password:
% Bad secrets
AP>en 0
AP>en 5
% No password set
AP>en 15
Password:
Password:
% Password: timeout expired!
Password:
% Bad secrets
AP>
AP>
AP>en
Password:
Password:
Password:
% Bad secrets
thanks and best regards,
tangsuan

Hi, I have even the worst problem,
that seems probably to to be never asked on Internet. After quick learning how to reset this creapy device, I can't get by no means the enable password in default config for this box, having read everywhere from Cisco guide through community pages to Google pages.. NOWHERE.
Question is : what else except Cisco, cisco, root, password... can solve this stupid issue?!? I expect some guru from responsible AP BU to answer this with definite answer, or someone from Cisco having mercy with me to contact such guy(s).
Here is my desperate situation :
Nothing from this page helped :
http://www.cisco.com/en/US/partner/products/hw/wireless/ps430/products_password_recovery09186a00800949d0.shtml#reset_ap_newer
Situation after hard reset:
Xmodem file system is available.
flashfs[0]: 26 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 6879232
flashfs[0]: Bytes available: 9119744
flashfs[0]: flashfs fsck took 43 seconds.
Base ethernet MAC Address: 00:22:55:9f:fc:a0
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
button pressed for 1 seconds
process_config_recovery: set IP address and config to default 10.0.0.1
Loading "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"...#########################################################################################################################################################################
File "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000
executing...
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
Image text-base: 0x00003000, data-base: 0x0035E440
Initializing flashfs...
flashfs[1]: 26 files, 8 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 6879232
flashfs[1]: Bytes available: 9119744
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number                          : 73-8962-14
PCA Assembly Number                  : 800-24818-13
PCA Revision Number                  : A0
PCB Serial Number                    : FOC12354426
Top Assembly Part Number             : 800-29144-03
Top Assembly Serial Number           : FCZ1238Q0HK
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9
Press RETURN to get started!
*Mar 1 00:00:08.354: %CDP_PD-4-POWER_OK: Full power - AC_ADAPDOWN: Line protocol on Interface FastEthernet0, changed state to up
Press>en
Password:
Password:
Password:
*Mar 1 00:00:27.393: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
% Bad secrets
Press>en
Password:
Password:
Password:
% Bad secrets
Press>
*Mar 1 00:00:36.530: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 192.168.1.2, mask 255.255.255.0, hostname Press
Press>en
Password:
Password:
Press>sho ver
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)
Press uptime is 17 minutes
System returned to ROM by power-on
System image file is "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"
cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number                          : 73-8962-14
PCA Assembly Number                  : 800-24818-13
PCA Revision Number                  : A0
PCB Serial Number                    : FOC12354426
Top Assembly Part Number             : 800-29144-03
Top Assembly Serial Number           : FCZ1238Q0HK
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9
Configuration register is 0xF
Press>

How to change the default save encoding of the dvm files when create dvm???

When I creating a DVM(domain-value mapping) in Chinese on the ESB control and confirm it, then restarted the SOA service, the DVM that I created in Chinese disappeared from ESB control. All the maps(both English and Chinese ) are in DVM Repository.
After I updated the encoding from ‘UTF-8’ to ‘GB2312’ in the three files below, and restarted the SOA service, the DVM in Chinese appeared on ESB control.
But when I adding the second row in Chinese and save it, then restart the SOA service, the DVM in Chinese disappeared from ESB Control once again. Because the encoding in the three files below is updated from ‘GB2312’ to ‘UTF-8’ .
Files:
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm\Chinese.xml.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\content\files\dvm\Chinese.xml_1.0
How to change the default save encoding of the dvm files when create dvm in ESB control ???

I have the same problem. When I updated to Mavericks now the bookmarks bar font is huge. I liked it the way it was before. I liked the smaller font. Also wish I could change the color of the sidebar and font/folders too.
I tried to see in preferences if there was anyway to change it, but I don't see anything there.

How to change the default view of published iCal's URL

I am publishing an iCal for a nonprofit group and link to the calendar from the group's website. The default URL given (in the send publish email option) leads to the week view of the current week. I would prefer the link to take site visitors to the month view of the calendar. If I go to the month view and copy the URL for it, and use that for the link, I have to change the URL each month, because the URL that comes from the month view will only show the month it was at the time I copied the URL -- it will not change with the new month. Does anyone have any idea of how I can change the URL so that it leads to the month view of whatever the current month is?
I should note that I know how to change the default view in the my browser, but I would rather not have to explain how to do this to all the people viewing the calendar -- just wanting the correct month view to show up when they click the link, without having to change it each month.
I would be so grateful if anyone has some insight on this!
Thanks.

Carlo,
The fact that this question has been left unanswered for over 2 months seems a little negligent on the part of Apple Support.
This Forum is unfortunately not Apple Support. According to Apple:
What is Apple Discussions and how can it help me?  "Apple Discussions is a user-to-user support forum where experts and other Apple product users get together to discuss Apple products. You'll find a wealth of information about your favorite Apple hardware and software products that will help you get the most out of your purchase. You can participate in discussions about various products and topics, find solutions to help you resolve issues, ask questions, get tips and advice, and more.
If you have a technical question about an Apple product, be sure to check out Apple's support resources first by consulting the application Help menu on your computer and visiting our Support site to view articles and more on our product support pages."
In direct response to your questions, I would say that (as observed by the OP) anyone who subscribes to a published calendar can make a change to their desired view using the "Preferences" icon which is displayed underneath the mini-month calendars.
There is no way that I know of to directly or conveniently change the time-range. There may be workarounds, but I could not find a suitable solution for you.
I would recommend that you provide iCal Feedback, if you are interested in informing Apple of your desires.
;~)

How to change the default servcie port number to be checked for the IPS sig

Dear
i have an AIP-SSM (IPS) installed in a an ASA firewall.
i have configured an access-list in the firewall to forward the traffic coming from the internet toward the internal server to be checked by the IPS module.
but the case is that the services have to be checked is not the default services port numbers.
http port is 8081
oracle port is 2006
and many other services.
the question now, is how to change the default service number in the IPS in order to be checked by the corresponding service signatures?
Thanks

You would set those as part of the signature variables.
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_signature_definitions.html#wp1040009

How to change the default element tag using dbms_xmlgen

here is my code that generate output for purchase order data. I followed the syntax shown in xml db developer guide.
I am getting the results but element tags are CAPS letters( As the coloumn names in the type defenitions are stored in CAPS in Oracle). but I need to show in small letters as per my requirement.
can anyone help me how to change the default tag names for elements.
==================================HERE IS THE CODE==================
DECLARE
qryCtx DBMS_XMLGEN.ctxHandle;
result CLOB;
BEGIN
qryCtx := DBMS_XMLGEN.newContext
('SELECT PODL_H_T
( CLOSEDDATETIME ,
COMPANY ,
CAST(MULTISET
(SELECT LINENUMBER ,
COMPANY ,
PURCHASEORDERID ,
ITEM ,
QUANTITYUM ,
TOTALQUANTITY
FROM cpo_wms_podl_LINES
WHERE PURCHASEORDERID = PH.PURCHASEORDERID) as PurchaseOrderDetailList
FROM cpo_wms_podl_HEADERS PH ');
-- now get the result
DBMS_XMLGEN.setRowSetTag(qryCtx, 'Receipts' );
DBMS_XMLGEN.setRowTag(qryCtx, 'PurchaseOrder' );
result := DBMS_XMLGEN.getXML(qryCtx);
INSERT INTO temp_clob_tab VALUES (result);
DBMS_XMLGEN.closeContext(qryCtx);
END;
-- select * from temp_clob_tab
===========create type script=====================
cpo_wms_podl_HEADERS
CREATE or replace TYPE PurchaseOrderDetail AS OBJECT(
LINENUMBER VARCHAR2(400 BYTE),
COMPANY VARCHAR2(400 BYTE),
PURCHASEORDERID VARCHAR2(400 BYTE),
ITEM VARCHAR2(400 BYTE),
QUANTITYUM VARCHAR2(400 BYTE),
TOTALQUANTITY NUMBER
create type PurchaseOrderDetailList as table of PurchaseOrderDetail
create table temp_clob_tab(result CLOB)
create type podl_HEADERS_list_t as table of podl_HEADERS_t
CREATE or replace TYPE PODL_H_T AS OBJECT
CLOSEDDATETIME DATE,
COMPANY VARCHAR2(400 BYTE),
CREATEDDATETIME DATE,
PURCHASEORDERID VARCHAR2(400 BYTE),
SHIP_TO VARCHAR2(400 BYTE),
linelist PurchaseOrderDetailList
)

but I need to show in small letters as per my requirement.add alias column names in double quotes as in
SQL> select dbms_xmlgen.getxmltype('select dname "DeptName", loc "Location" from dept') dept_xml from dual
DEPT_XML
<ROWSET>
<ROW>
    <DeptName>ACCOUNTING</DeptName>
    <Location>NEW YORK</Location>
</ROW>
<ROW>
    <DeptName>RESEARCH</DeptName>
    <Location>DALLAS</Location>
</ROW>
<ROW>
    <DeptName>SALES</DeptName>
    <Location>CHICAGO</Location>
</ROW>
<ROW>
    <DeptName>OPERATIONS</DeptName>
    <Location>BOSTON</Location>
</ROW>
<ROW>
    <DeptName>SALES</DeptName>
    <Location>MUNICH</Location>
</ROW>
</ROWSET>
1 row selected.

Changing the default "New Item" link url in SharePoint

Is it possible to change the default url of the New Item button on a list.
When i hover over or click on new item link it show the ......../15/listform.aspx?Page type=blah.....blah......
I want it to be something like :/newform?source=xxxx
Please help me !
Thank you !

Hi,
The following code for your reference, please add the code into a Content Editor Web Part in the list view page.
<script type="text/javascript" src="http://code.jquery.com/jquery-1.11.2.min.js"></script>
<script type="text/javascript">
$(function () {
$("#idHomePageNewItem").attr("href", "http://site/list/newform.aspx?source=http://...........");
$("#idHomePageNewItem").attr("onclick", "");
</script>
Best Regards
Dennis Guo
TechNet Community Support

Need help changing the default Save Path

Hello,
We are implementing SAP, and will be using Citrix as the source for the GUI. One of our requirnments are, that we need to change the default "Save Path" that users save documents too. By default, this is to the C drive, but, we need it set to a different drive (i.e. V: on the citrix server).
We found this note on SDN (see below) - however, it does not explain how to change or add this registry value? Is this done in the GUI options, or in regedit? If in reg-edit, where abouts in the tree does it go?
Thanks guys, and any help would be greatly appriciated.
Richard
(As of SAP GUI 7.20, patch level 4) the REG_EXPAND_SZ registry value InitSaveDir can be used to configure the default path and folder for users to save the reported information in case of an access denial due to security rules. If users change the default path and save the information to an individual location, this new path will be kept as long as the user does not terminate the program. When starting SAP GUI again, users will get the configured default path again to store the reported information, the individual path changes will be lost. If the registry value does not exist, the default directory is the document directory of the SAP GUI.
By default none of the above registry values exists. In order to change the behavior of the security module, the registry values need to be created and set to the desired value. A not existing registry value means use the default.
In this doc:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/002444be-7018-2d10-e18e-a8c537198ef6?quicklink=index&overridelayout=true

Hi,
"Security rules that are created for a large number of users can be centrally stored on a server by an administrator. The administrator can use the registry values below under the registry key
[HKEY_LOCAL_MACHINE\Software\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module.
Note: For 64 bit operating systems please use the following registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module."
You can use regedit for installing this values.
Best Regards,
Aleh

To change the defaults headings/parts' values in a FSG Report

Similar Messages

Maybe you are looking for