To change "To Valid" date in BOM Header

Hi Guys,
Pls tell me the cofig setting where i can go and change the default "to validity" date-31/12/999 proposed by the system
Awaiting eagerly for quick replies
Vijai

Hi vijay,
please go through the below SDN thread which was replied by our friends earlier.
Re: Valid to date in BOM.
i think it is usefull to you
regards
pradeep

Similar Messages

Valid to date for BOM Header and Item

Hello everyone,
I have been searching for "valid-to" date for BOM header and Items since several days but no luck ..
I know we can see it using transactions cs11/cs03 etc. But i wish to know the table where they are stored. As I need to extract them to BW.
Any help will be highly appreciated.
Thanks in advance!
Regards,
Anuj

Hi Anuj
In table STPO,the field AEDAT gets updated only when a change number is used,otherwise the valid to date will be shown nil here.
And also ref the link
Problem finding Valid To Date or Change number to on BOM
pavan

Change validity dates of BOM version

how can i change a validity date of a BOM? ( valid to )

Hi,
Production Version is the one method. In prod version w can give valid from date & to date.
So system will select the BOM accordingly.
Another option without using Prod version Check in OS32. Define alternative determination of BOM.
In this you can give valid to date for alternative BOM.
Ex: MAT alt 1 valid 10/07/08
MAT alt2 valid 30/12/08
For this selection you have to select BOM selection by - Date in MRP4 view of material master.
So system will select the BOM automatically according to valid date .
Regards,
Dharma

Change Validity Dates for BOM

Dear Experts,
Please guide to change the validity dates for a BOM without using ECM.
What are the steps needed to be followed.
Thanks & Regards,
Rohit.

Dear Sir,
That is what I have done for a material.
Apart from making Routing again after deleting the BOM, do I need to take care of any other thing?
Thanks & Regards,
Rohit.

Change the validity date in change number

hi team,
I want to change the validity date of a change number from 01.01.09 to 01.03.09. I am getting an error "A BOM has already been changed using a change number with the same valid-from date as the selected date 03.01.2009". I can change the date to before 01.01.09 but cannot after 01.01.09.
Can you please help me.
thank you,
Satish

Dear Mamiditi Satish Kumar,
Is it a change number with release key or without release key?
Do you want to assign a different validity date for the changes made using that change number?
Try using alternative date field in CC02.and you have to select the object to assign the alternative date.
Say if you want to assign an alternative date for a processed BOM,you have to select that object and
enter the alternative date.
Regards
Mangalraj.S

Changing the validity date of a work center.

Dear SAP Guru,
We are trying to change the validity date of a certain work center via transaction code CR02, however, we can only see the changed validity date in the validities tab (Costing View) but still the default validity date is the first validity created. We are trying to delete the Cost Center assignment for the unwanted validity date but still it came back to the first validity created. Is this a natural SAP behavior or is there something that we still need to do so that we can default our desired validity date?
Thank you in advance for your help.
Best regards,
JMT

Dear,
Go to KS04.. enter the cost center. Enter the time period for which u want to delete the cost center. enter the date upto which u wanted the end date as the start date of the deletion.... it will delete the cost center for the future time period.... this will do....Then create new one and assign to work center and then check.
There is no validity period for work centers...this will be available as long as you use in the routing.
Hope clear to you.
Regards,
R.Brahmankar

Validity Date at BOM componet

Dear all,
I'm strugling on changing the valid-to date for a BOM component.
Let me explain in detail what the scenario is and what I've done so far.
I have a BOM header "Z" with 5 different components, Y, X, W, V and U. Validity dates should be as follows:
- Y --> 02.04.2010 to 31.12.9999
- X --> 02.04.2010 to 31.12.9999
- W --> 02.04.2010 to 31.12.9999
- V --> 02.04.2010 to 20.02.2012
- U --> 21.02.2012 to 31.12.9999
I have created a change number with validity date 21.02.2012, but when trying to change BOM components validity dates fields will be grey and won't allow me to do the necessary changes.
Could you please guide me with the necessary steps that I need to follow or where my issue would be? - I have already been checking the forum and followed some of your tips(checked config and so on, and everything seems to be ok).
Thanks a lot in advance for your help on this one as it's quite urgent to solve this so we can test it, as we need to provide with some explamples on how material variances report will be affected to client ASAP.
Kind regards,
Mario

Hi Mariete ,
you just need to create a change number with the valid date you want for component , example if you create a change number valid from 01.01.2010 and if you use it for changing BOM , all the changes you made will have this validity date.
its not possible to input validity dates, so all the times it will be greyed out , you can control it as discribe above.
in you case you need to create 2 change numbers , 1 with valid from date in 02.04.2010 and use it for component Y X W and V
and others with validity date 21.02.2012 and use it for component U.
another thing please keep in mind if you BOM is created in todays date or date which is greater then 02.04.2010 will be a problem , so suggestion is while creating BOM , use a change number which is valid from 02.04.2010 and cause of it all 4 components will be automitacily hace valid date 02.04.2010.
and after creating this BOM with 4 component use a second change number and add component U.
please check i hope it wil help you.
Thanks
Ritesh

Validity Date of BOM code.

Hi,
I need to know the tables or the functionality which can help to find the validity date of a BOM code. I am a BW consultant and have tried tables like MAST, STAS, STPO but could not find the 'valid to date'.
Plz guide,
Regards,
Saurabh Diwakar

Dear Saurabh,
1.IF you are using ECM - Engineering Change number for BOM Creation/Change means then the valid to
Date can be tracked.
2.The default valid to date for any component in a BOM will be 31.12.9999.
3.Suppose using a Change number say for EG:500000000105,if you are deleting a Component in a BOM
means then the same details can be obtained from the table STAS.The valid to date will be the valid from
date of the Change number.
4.Also check this link - [Table STAS along with Change Number|Re: Latest BOM]
Regards
Mangalraj.S

How to enter BOM data in BOM header

I need a small help from SAP GURUS regarding the subject given above. When i was trying to enter BOM data in DIR enabled object links of BOM header, it was not allowing (Disabled) to enter the same.
How to enter BOM details in BOM header in DIR?
Is their any proceedure to enter the BOM data in DIR object?
Thanks in advance.
Regards
Suresh. J

Hi Suresh,
unfortunatly it is not possible to add a BOM header link from document side.
Generally the linkage of objects to a DIR is designed as such that a
user can create and maintain the link from object-side as well as from
document-side. There are, however, some exceptions like the production
order (PORDER), BOM item (STPO_DOC) and BOM header (STKO_DOC). Links to
these objects can only be created and maintained from object-side.
Regarding BOM objects the reason for this restriction is due to the
engineering change master, which is completely connected to BOM. The
functionality at this level only allows the display of BOM objects from
the DMS application.
The check for these objects is done in the following coding:
Main Program     SAPLCV130
Source code of   LCV130O01
MODULE (PBO)     L201_BLANKLINES
***special settings
IF drad-dokob = 'PORDER' or drad-dokob = 'STPO_DOC' or
     drad-dokob = 'STKO_DOC' or drad-dokob = 'DPR_OBJLNK'.
    PERFORM display_col_change USING 'PORDER-CO_POSNR' 1 1.   " no icon
    GF_no_edit_screen_link = 'X'.
ENDIF.
if not gf_no_edit_screen_link is initial
and display_mode NE c_dms_display.
    message w321 with intdrad-dokob.
endif.
ENDMODULE.                             " L201_BLANKLINES OUTPUT
I hope this information is usefull for you. In that case please reward points.
Best regards,
Christoph

Change qualification validity date

Hi SAP-HR experts!
A qualification in our qualification catalog has currently no validity. So we inserted a lot of qualifications for our employee with enddate 12/31/9999. Now we should change this specific qualifcation to a validity of 2 years. The problem is that all corresponding employee qualifications are unlimitid valid (12/31/9999).
Is there a report in SAP available which changes the enddate of all correspondinig employee quailifications to the appropriate enddate (= begindate + 2 years)?
EXAMPLE
Current employee qualification:
begindate 12/01/2006
enddate 12/31/9999
after change:
begindate 12/01/2006
enddate 11/30/2008
Thanks a lot for your support.
Regards
Stefan

Stefan,
I am having a similar issue. Our users wish to change the end date of the assignment of a qualification. However SAP does not allow changing of the begin and end dates once the qualification is assigned to an employee. I am not sure why...
I looked at the program suggested "RHGRENZ4" to change end dates, but does not work either as we have integrated PA and Qualifications, and qualifications are not stored in the regular infotype table (PA0024) but are stored elsewhere.
I would like to know if you have resolved your problem and how.
Thanks
Rajesh Barman

Change the Validity Date.

Dear Supports,
We have tickets more then 1000 in solution manager. The status is over due ie. the current date = 3 days validity is passed. the status is marked as Proposed Solution. and the monitor status is in RED.
Please confirm how can i changed it to green else increasing the date form 3 days to 365 days for temporary.
Current Setting under the ticket is as follows.
Start customer requirement TU 27.01.2009 00:00 INDIA Current Date
End customer requirement FR 30.01.2009 00:00 INDIA Start + 3 Days
Ramesh Jaiswal
9867936636.

Ramesh
You can change the default date and time via configuraiton from spro
Goto spro->scenario specific>service desk>
The create a customized date profile and then assign this to transaction type...if u r usin std then it wil be SLFN.
For more....Goto the Service desk config guide....available on Service.sap
Regards
Prakahr

Changing The Validity Dates In Org Model in CRM- User Level

Hi
How can we restrict the Validity Dates in Organisation Structure at User Level.
I need that the user should be given some specific dates<b> ( Valid till or assigned till )</b> while assigning in the org. And it should be visible always in the Org Model.
We tried using Delimited Date Function, but the User gets ellapsed if the Validity is expired.With the business point of view, <b>the requirement is that all user should be listed in Org model with respect to any dates.this would mean that if a user is terminated we would want to change the Valid till date in the Org</b>

Hi Amrita,
Business partner number and Object ID is automatically determines by system when creating a org unit.
I dont find any configuration to create org unit with your own BP number and object ID. You have option to make repairs to the existing org unit.
Please find the below path to repair the org unit
IMG -> CRM -> Master Data -> Business partner -> Integration Business partner -Org management -> Create Business partner initially
Select the org unit and execute to get all the org units.
You can select the org units with errors /warnings and click on start repair to get automatic assignment of BP.
Hope it helps
Reward points if it helps
Regards,
Madhu

Schedule changes and validity dates for prices in product catalog(SRM-MDM)

Hello!
I'm working on a project that is going to use SRM-MDM and the question is if it is possible to schedule changes(for example to add new prices that have a validity period, can you make the changes now that are going to be valid from 1st of februari?Or can I add products today that are only going to be available to buy from a particular date?).
The other question is if it is possible to have a validity period for prices and when the date is valid,then the product is shown in the catalog.In the same way that when the date is not valid, the product is not shown in the catalog.Can this be made automactically?Can a logic be build to choose which products are going to be shown in the catalog?
Do you have any suggestions for those issues?
Thanks in advance!

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

ALE BOM. Updates ALL! items with validity date & change no.

Hi All,
We are having problems where ALE-BOM sent with change in validity date (with change no) to a particular item. What happens is that ALE-BOM will instead update ALL! items with the same validity date and change number.
Next,when we process ALE again for the same BOM with a different validity date(with change no), then only that
particular item is updated with validity date and change no.
Would anyone know what could be the problem that when changes are sent for the first time all items are updated?
[Version: SAP 4.6C/ SAPKH46C48]
Regards,
Neeth

Dear:
The error itself telling you the correction. You profit center which is assigned to your cost center has a validity date less than the one you are now assigning.You can check in KE52 against the profit center assigned to your cost center master data. However the best thing is to go to KS01 and create this cost center with desired validity date.
This will resolve your issue.
Regards

Changing validity date using BAPI_PROFITCENTER_CHANGE for a profit center.

Hi Friends
I need your help to know if we can use BAPI_PROFITCENTER_CHANGE to change the validity period of a profit center.I am using this BAPI in a LSMW program.
The changes I want to make are something like changing the validity dates from
1) 01/01/2006 - 12/12/9999 to 01/01/2007 - 12/12/9999
2) 01/01/2006 - 12/12/9999 to 01/01/2005 - 12/12/9999
3) 01/01/2006 - 12/12/9999 to 01/01/2006 - 12/12/2010
or should I use BAPI_PROFITCENTER_CREATE?
-Thanks
Mitesh

change document in profit center change
Bapi - BAPI_ASSET_ACQUISITION_POST
need a function module for profit center
Please give me reward points...

To change "To Valid" date in BOM Header

Similar Messages

Maybe you are looking for