To check connectivity betwwen XI and Bank Server at R/3 Server.

Can we test connectivity between XI and Bank server at R/3 server itself through any RFC or program.

depends on what the connection is!
is it inbound or outbound?

Similar Messages

I keep getting This Connection is Untrusted and I'm on a secure server. What is this and how can I fix it?

I have checked the security information and nothing seems to affect this issue. I've restarted my computer with no resolution.

hi vijaysampath, first please make sure that the date, time & timezone are set correctly on your system. if this doesn't solve the issue (or it is already set properly), a possible solution depends on different factors:
* what is the '''error code''' shown under ''technical details'' on the error page?
in case the error code equals ''sec_error_unknown_issuer'', please attempt to add an exception on the bottom of the error page in order to inspect the certificate like it is shown on the screenshot attached:
* which '''issuer information''' does the certificate contain?
please report back with those two pieces of information. thank you!

Unix Script to connect to Portal Database and move the files to XI Server

Hi all,
we have a requirement where the source BW system is placing files in Content Management in the link http://xxx:50100/irj/go/km/docs/documents/Public%20Documents/HFM.
XI needs to read the files from the above location.Since the files are stored in Portal database,we cant do FTP to this location.
So we have been asked to write a script which connect to this location and moves the files to XI directory.
Can someone plz help me with this script?

The concern has been discussed earlier at
here and should be helpful to check the database size and free available space in exchange server.
This blog has also good explained about "how to count mailbox per database in exchange 2010". Please check this :
http://blog.powershell.no/2010/11/21/retrieve-number-of-mailboxes-per-database-in-exchange-server-2010/

Difference betwwen sandbox and IDES

HI all,
Can Anybody please tell me whait s the difference betwwen sandbox and IDES.
Please use the subject effectively
Edited by: Lakshmipathi on Sep 1, 2009 6:46 PM

Hi Radheshyam,
Landscape is like a server system or like a layout of the servers or some may even call it the architecture of the servers viz. SAP is divided into three different lanscape DEV, QAS and PROD.
- DEV would have multiple clients for ex: 190- Sandbox, 100- Golden, 180- Unit Test.
- QAS may again have mutiple clients for ex: 300- Integration Test, 700 to 710 Training.
- PROD may have something like a 200 Production.
These names and numbers are the implementer's discreet on how they want it or they have been using in their previous implementations or how is the client's business scenario.
Now whatever you do in the Sandbox doesn't affect the other servers or clients. Whenever you think you are satisfied with your configuration and you think you can use it moving forward, you RE-DO it in the golden client (remember, this is a very neat and clean client and you cannot use it for rough usage). As you re-do everything that you had thought was important and usable, you get a transport request pop up upon saving everytime. You save it under a transport request and give your description to it. Thus the configuration is transported to the Unit Test client (180 in this example).
You don't run any transaction or even use the SAP Easy Access screen on the 100 (golden) client. This is a configuration only client. Now upon a successful tranport by the Basis guy, you have all the configuration in the Testing client, just as it is in the Golden client. The configuration remains in sync between these two clients.
But in the Testing client you can not even access SPRO (Display IMG) screen. It's a transaction only client where you perform the unit test. Upon a satisfactory unit test, you move the good configuration to the next SERVER (DEV). The incorrect or unsatisfactory configuration is corrected in Golden (may again as well be practised in the sandbox prior to Golden) and accordingly transported back to 180 (Unit Test) until the unit test affected by that particular config is satisfactory.
The Golden client remains the 'database' (if you wanna call it that) or you may rather call it the 'ultimate' reference client for all the good, complete and final configuration that is being used in the implementation.
In summary:
Landscape : is the arrangement for the servers
IDES : is purely for education purpose and is NOT INCLUDED in the landscape.
DEVELOPMENT ---> QUALITY -
> PRODUCTION
DEVELOPMENT : is where the the consultants do the customization as per the company's requirement.
QUALITY : is where the core team members and other members test the customization.
PRODUCTION : is where the live data of the company is recorded.
A request will flow from Dev->Qual->Prod and not backwards.
1. Sandbox server: In the initial stages of any implementation project, You are given a sandbox server where you do all the configuration/customization as per the companies business process.
2. Development Server: - Once the BBP gets signed off, the configuration is done is development server and saved in workbench requests, to be transported to Production server.
3. Production Server: This is the last/ most refined client where the user will work after project GO LIVE. Any changes/ new develpoment is done is development client and the request is transported to production.
These three are landscape of any Company. They organised their office in these three way. Developer develop their program in Development server and then transport it to test server. In testing server tester check/test the program and then transport it to Production Server. Later it will deploy to client from production server.
Presentaion Server- Where SAP GUI have.
Application Server - Where SAP Installed.
Database Server - Where Database installed.
What is the meaning of "R" in R/3 systems?
R/3 stands for realtime three tier architecture. This is the kind of architrecture SAP R/3 system has.
R/3 means three layers are installed in Different system/server and they are connected with each other.
1) Presentation
2) Application
3) Database
Why do we call client 000 as golden client?
Golden client contains all the configuration data and master data so some extent. All the configuration settings are done in golden clients and then moved to other clients. Hence this client acts as a master record for all transaction settings, hence the name "Golden Client".
Thanks,
Swamy H P

Hp laserjet m1536dnf mfp. "Connection error Check connection".

i have hp laserjet m1536dnf mfp. when tried to enable eprint at the web services setup menu... i get "Connection error Check connection". Network and Internet connection works fine. Please help?
It seems like the Printer is having a hard time connecting to the ePrint server to get me the email address.
Thanks,
John

Hi,
My firmware is up todate.
I have tried all the recommended support steps... currently had the printer on manual IP. Still same connection error.
Product Name: HP LaserJet M1536dnf MFP Formatter Number: P932T2L Serial Number: CNC9C7WB2W Service ID: 21270 Firmware Date: 20110405 Disable Fax: No Telecom Version: 04-015-001 Location: USA ADF Installed: Yes Max Monochrome Print Quality: FastRes 1200 Controller Number: 52 Duplexer Version: 0 Device Description: HP LaserJet M1536dnf MFP Language: English Asset Number: 153 Company Name: Contact Person: Device Location: warehouse Product Security: Off Quiet Mode: Off
Hardware Address: 10:1f:74:46:4f:20 Host Name: NPI464F20 IPv4 Address: 10.0.1.112 Status Ready IPv4 Address: 10.0.1.112 Subnet Mask: 255.255.255.0 Default Gateway: 10.0.1.1 IP Configured By: Manual WINS Server: 0.0.0.0 Preferred DNS Address: 205.152.37.23 Alternate DNS Address: 205.152.150.23 Status: Connected Hardware Address: 10:1f:74:46:4f:20 Link Speed and Duplex Negotiation: Automatic
Link Speed: 100 Mbps Duplex: Full Auto Crossover: Enabled

Since upgrade to Mac OS 10.7.2L , recurring error message: "There was a problem connecting to the server "servername". The server may not exist...etc."

Since upgrade to Mac OS 10.7.2 Lion, on MacBookPro, recurring (every minute or so) error message: "There was a problem connecting to the server "servername". The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network conneection, and then try again." (The server specified is no longer connected or used). The error message must be clicked twice to continue to work on the computer. Time Machine is switched off. No external disks are connected. Keychain entries for "servername" have been removed since the problem arose. Is there any way to prevent this error message?

I am having the same problem; have tried deleting some of the plist files as others suggested but to no avail. Tried turning off time machine - that didn't fix it either. Very dispappointing.

Unable to connect to linux server though tight VNC server

Hi!
I have configured VNC server 4.1 for my Linux Red hat server. VNC server is working on port 5903 and user "oracle" is allowed to connect (It means he is vncuser). while i try to connect to server using VNC it prompts to enter password. It means server is reachable. But When I enter correct password it returns Authentication Failed even though password is 100% . To confirm password I changed it using "vncpasswd" command and then I restart the vnc service by $ service vncserver start command. The service started successfully but couldn't access the server through VNC.
I checked in /etc/sysconfig/iptables and it contains entry as
-A RH-Firewall-1-INPUT -p udp -m udp --dport 53 -j ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m tcp --dport 53 -j ACCEPT
So what anything else i m missing ? What should I do ?
Thanks & Regards
Tushar

Thanks
My remote server OS is Red Hat 5.2 . And I am trying to connect to my remote host server (Red hat 5.2 ) through VNC which is installed on my local system Windows XP. I usually use putty to get command base access of my remote server. I have also configured SSH tunnel in putty so that i can connect to VNC and get GUI access of my server.
What action will taken if i run command given by you. Do I have to reboot my server, if yes then it is not possible.
$ service iptables stop
I think there is no issue of firewall. Because it asks me to enter password .That means ping to server is reachable on port 5903.
My /etc/sysconfig/vncservers file contains following entry
VNCSERVERS = "3:oracle"
And one line for display resolution.

HT4972 cant update an iphone 4 to latest ios connected to computer and through itunes- wont ever connect to server - note i cant get itunes to update to latest version either just doing help/check for updates - it says itunes update server cant be conta

trying to get a user with an iphone 4 to update to latest IOS - he is on 4.2.1 - off and on for months he has tried and it always fails trying to connect to server etc.
note - he cant even update itunes version without his phone hooked to his computer. just clicking help and check for updates in itunes it will say itunes update server cant be connected.... so until we get that itunes fixed he wont be able to update his ios it appears. ideas?

Disalbe ALL security software (firewall, antivirus, etc.) running on your computer while updating.

There was a problem connecting to the server "Time Capsule". The share does not exist on the server. Please check the share name, and then try again.

The following error pop's up as an [OK] dialogue box after logging in the iMac,
There was a problem connecting to the server "Time Capsule".
The share does not exist on the server. Please check the share name, and then try again."
As it happens, a connection to the Time Capsule is established usually, anyway. On occasion it doesn't.
I have a Volume, Data, on the capsule, which similarly, usually mounts, but occassionally doesn't, with access permissions denied.
Any suggestions on how begin to work out how to achieve networking seamlesness?

First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
 ▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

I know this is old now but since the update i can't get into icloud on my phone it keeps asking me to check t & c's and now no emails. Can't connect to server. I have 4S please help :-(

I know this is old now but since the update i can't get into icloud on my phone it keeps asking me to check t & c's and now no emails. Can't connect to server. I have 4S please help :-(

Hi Kellyssi,
Thanks for visiting Apple Support Communities.
If you're being asked repeatedly to check terms and conditions, try restarting and then resetting your iPhone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
All the best,
Jeremy

I can not connect to iswifter, some times it is connected and some time it shows " UNABLE TO CONNECT TO SERVER PLEASE CHECK THE INTERNET" but my internet connection is good and other wbe site i can open without any problem. Please guide me..

I can not connect to iswifter, some times it is connected and some time it is not connected and getting message " UNABLE TO CONNECT TO SERVER , CHECK YOUR INTERNET" but my internet connection is ok and I can open other web site with out any problem. Please guide me how to solve this issue.

Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
 Cheers, Tom

"Unable to establish a connection between WebEx and the mail server."

Hi,
I installed Cisco WebEx and integrated with our Microsoft exchange server. It showed server "UP". everything's came up and working fine after that and sudenlly i found this message "Unable to establish a connection with the mail server. Please recheck settings."
I went into the Mail Server setup to edit settings and now, it shows Server Down. Do I need to do something on the MS Exchange 2010 or from webex server ??
Any help is greatly appreciated. Thanks a lot!

Every 180 seconds, CWMS verifies the connection to the SMTP server by establishing a connection on TCP port 25 (SMTP) and then sending the EHLO command followed by the QUIT command. This check is also performed once when logging into the admin web page or when browsing to System -> Servers (where the status of the mail server is displayed).
If this sequence does not complete successfully, the warning “Unable to establish a connection with the mail server. Please recheck settings.” will show in a banner at the top of the CWMS admin pages.
You can verify the connection to the SMTP server manually by using “telnet 25”.
If you have access to the CWMS unix shell be aware that CWMS does not come with the telnet command installed.
As an alternative, you can use this 3-lines script:
exec 3<>/dev/tcp/x.x.x.x/25
echo -e "EHLO\r\nQUIT\r\n " >&3
cat <&3
Replace x.x.x.x by the ip address or hostname of the SMTP server and save the script in a file, f.e.:
/* script saved in a file named ehlo */
[root@dchriste-cwms-adm1 ~]# cat ./ehlo
exec 3<>/dev/tcp/10.48.54.79/25
echo -e "EHLO\r\nQUIT\r\n " >&3
cat <&3
Then, execute it:
[root@dchriste-cwms-adm1 ~]# sh ./ehlo
The output should be similar to this:
220 *******************************************************************************************************************
250-confukdc.confuk.com Hello [10.48.52.110]
250-TURN
250-SIZE
250-ETRN
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-8bitmime
250-BINARYMIME
250-CHUNKING
250-VRFY
250-XXXXXXXXXXXXXXXXXXXXXXXA
250-X-EXPS=LOGIN
250-AUTH GSSAPI NTLM LOGIN
250-AUTH=LOGIN
250-X-LINK2STATE
250-XEXCH50
250 OK221 2.0.0 confukdc.confuk.com Service closing transmission channel
Also, you can use this tcpdump command to see the conversation (replace x.x.x.x by the SMTP server’s IP address or hostname):
tcpdump -vXs 0 host x.x.x.x and tcp port 25
If you have HA, it is not certain which admin VM talks to the smtp server, so best to check both.
If you don't have access to the CWMS unix shell, best to span the switch ports and run packet capture.

My Firefox no longer works, it will not go to any website and offers the message "The proxy server is rejecting connections". I had the same problem in IExplorer but was able to fix it. I did not choose a proxy server, ever. How do I fix this in Firefox?

I changed out my wireless router, from a Linksys to a Netgear. Everything seemed to work fine, but shortly afterward Firefox could not be used to find any websites, and gave me the message above. The same happened with Internet Explorer, but a tech representative for my ISP directed me to the page where "proxy server" was incorrectly checked and it fixed the problem. I don't know where to go in Firefox to find the same or a similar page. My laptop continued to work fine for some time after, but eventually developed the same problem. I uninstalled and reinstalled Firefox, with no luck, and all desktop shortcuts based on Firefox are inoperative. I just keep getting the message that the proxy server is rejecting connections. Since I did not select a proxy server, I don't know how to deselect it.

No idea what "tried everything" means.
Here is how you troubleshoot a password problem.
Go to your email providers web mail page and verify that you have a working username and password by logging into your account there. If you cannot log in there, look for the link to reset your password. Your email password is administered with your email provider.
Once you have a working password you need to remove any stored passwords in Thunderbird and replace with the new, working password.
From the menu bar select''' Tools-Options-Security-Passwords-Stored Passwords'''
Remove the passwords for the problem account. Close Thunderbird and restart it. You will be asked for a password. Enter the new password.
No menu bar with Tools? Press the '''alt '''key.
FYI: Thunderbird settings are stored in a different file from the program. Removing the program and reinstalling just keeps you busy for a little while and rarely fixes anything. As you have seen the old settings are picked up when Thunderbird is reinstalled.

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.
Has anybody come across this error and found a fool-proof solution? I have found some stuff on the web but nothing seems to work. In particular this one on the Apple Help doesn't:
http://support.apple.com/kb/HT4700
I have a W2K3 server where the volume is. It's a new Mac with OSX 10.8 and is connecting with AFP (I don’t want to move to SMB yet). There are older Macs with lower OS and all of them work fine. I have checked all the basic stuff and it is set-up correctly (hosts file on Mac, network, etc.).
Any help greatly appreciated,
Cheers,
Ian

This may work for you:
http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/

Failed to connect to the server, specify a valid server name and ID and pw

I am trying to install business one on a clients application server, where their sql server software is installed on a different server. When I get to the point of the installation where it asks for connection information: sql type, sql server name, logon and password, it fails after entering the correct info. I have double checked this info, typed it repeatedly and correctly and I continue to receive the following error: Failed to connect to the server, specify a valid server name and ID and password and try again. Can anyone lead me in the right direction to determine what my issue is? I can connect to sql server with the sa logon, on the sql server and I can access/ping the sql server from the application server, I just can't connect to sql server through the installation. I checked the sql server settings that I know of, so I don't know if it is an issue there or if it is a port issue or what.
Thanks for any help.

Following is whjat the customers IT team reported they did to get the install running:
RIGHT! Worked it out! It wasn't firewall in the end at all, it was that the SAP B1 installation isn't aware of SQL Server 2008 R2 (version 10.50.x.x).
The vbscript was looking for the presence of SQL Server 2008 (version 10.0.x.x) in the registry and not by scanning ports or suchlike.
If you use the autorun installation from this folder; E:\BusinessEvolution\Software\SAP_Extract_via_WINZIP it should work fine - I've modified the checksql.htm to look for SQL 2008 R2 and now autorun goes past that first problem.
Not sure if that will be any help to you? In that instance I think we were installing 8.8 PL17...
The upgrade frpm there to 8.81 PL07 worked fine

To check connectivity betwwen XI and Bank Server at R/3 Server.

Similar Messages

Maybe you are looking for