To check the problem in the scenario

Hi experts,
I am currnetly working in an enhancement of 2 ODS "ZCCA_O1A" and 'ZOPZ_O1A" to add one more text field EBELP. The infopackage used for loading the data in First ODS existing in production server involves one more ODS ZCCA_O1 and infopackage used for loading the data in Second ODS existing in production server involves one more ODS and one infoCube. All set for delta mechanism. I just need to load updated data in enhanced ODS. So again doing init will disturb the loading in other data targets or not? because of making changes in r/3 side as it is our source system and we are using standard datasources 0CO_OM_OPA_6 AND 0CO_OM_CCA_9.
Please help me ... how to proceed in this scenario.

Hi Andrea,
Stardard adapter for ERP-CIC in CRM is /DSD/VC_REQDATES_GET.
You must have:
Config steps in DSD - Visit Control - Specify Allowed Sales Documents types
RFC connection to CRM
Visit Plans configured and created
Hope this helps you.
Kind regards,
Frank Di Polo

Similar Messages

ODI built in for checking the scenario status in case of re-run

I have a package like this.
scenario1 ----(ok)-----> scenario2 ----(ok)-----> scenario3
When i run the package for the first time, assume that the scenario1 is executed successfully and scenario2 has failed.
I correct the error in scenario2 and run the package again. I dont want the scenario1 to be executed as it has already been executed successfully. The execution should start from scenario2.
Is there any Built in tool in ODI to achieve this.
Thanks
Pardha

There is no default mechanism for doing this. I could be done by using your own run control mechanism, logging the execution etc and running with variables.

Problem in the scenario SOAP to RFC Syn

Hello All,
i developed one scenario for our client and development is same like below link.
http://www.riyaz.net/blog/xipi-consuming-xi-web-services-using-web-dynpro-part-i/technology/sap/6/
when i test the interface iam getting below error, Please tell me do i need to install any patch in Xi server or do i need to implement any note.
My SAP XI server version 3.0 and Service pack:19
2010-07-19 07:24:57     Operation performed     The message has been received by the mail system. Profile: XI URL: http://xxxxxxxxx:50000/MessagingSystem/receive/AFW/XI credential (User): XIISUSER
2010-07-19 07:24:57     Operation performed     With the connection RFC_http: / / sap.com / xi / XI / System. Attempted placement of the message in the queue of requests.
2010-07-19 07:24:57     Operation performed     Message queued dCaution
2010-07-19 07:24:57     Operation performed     The message has been retrieved from the queue dCaution queries.
2010-07-19 07:24:57     Operation performed     The status of the message has been activated on DLNG
2010-07-19 07:24:58     Operation performed     Paper channel: CC_R_RFC
2010-07-19 07:24:58     Operation performed     MP: entering
2010-07-19 07:24:58     Operation performed     MP: processing local module localejbs/RfcAFBean
2010-07-19 07:24:58     Error     MP: exception caught with cause com.sap.engine.services.ejb.exceptions.BaseEJBException: Exception in method process.
2010-07-19 07:24:58     Error     Exceptions occurred for Adapter Framework: Exception in method process.
2010-07-19 07:24:58     Error     The dissemination of the message to the application via RFC_http: / / sap.com / xi / XI / System failed due to com.sap.aii.af.ra.ms.api.RecoverableException: Exception in method process.:
com.sap.engine.services.ejb.exceptions.BaseEJBException: Exception in method Process .. Enabled message "Failed".
2010-07-19 07:24:58     Error     The status of the message has been activated on FAIL
2010-07-19 07:24:58     Error     Return of the synchronous error message to the calling application: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in method process.: Com.sap.engine.services.ejb.exceptions.BaseEJBException: Exception method in process ..
Thanks and Regards,
Chinna
Edited by: chinnasapxi on Jul 19, 2010 10:55 AM
Edited by: chinnasapxi on Jul 19, 2010 10:56 AM

Hi Cinna,
>just now i checked the RFC it is working
this together with the header "Problem in the scenario SOAP to RFC Syn" is missunderstoobable. But ok, the error is inside RFC adapter: may be it cannot create the DIAG RFC call with the XML what you provided in RTW.
To be shure to have sent the right XML send a message but use a Message Mapping with RFC module as target.
Regards,
Udo

When i try to add DownloadHelper it comes up with unexpected installation error review the error console log for more details - 203, how to it check the log and how do i fix this problem?

== Issue
==
I have another kind of problem with Firefox
== Description
==
When i tried to install DownloadHelper this happened Firefox could not install the file at
https://addons.mozilla.org/en-US/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=addondetail
because: Unexpected installation error
Review the Error Console log for more details.
-203
, how do i check the log and how do i resolve this problem? thank you
== This happened
==
Just once or twice
== today
==
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Ask Toolbar for Firefox
2.1.0.5
true
AVG Safe Search
9.0.0.783
true
{3f963a5b-e555-4543-90e2-c3908898db71}
Java Console
6.0.17
true
Microsoft .NET Framework Assistant
1.1
true
{20a82645-c095-46ed-80e3-08825760534b}
BitDefender Antiphishing Toolbar
2.0
true
[email protected]
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
general.useragent.extra.microsoftdotnet
(.NET CLR 3.5.30729)
network.cookie.prefsMigrated
true
places.last_vacuum
1276351876
print.print_printer
HP Photosmart D5300 series
print.printer_HP_Photosmart_D5300_series.print_bgcolor
false
print.printer_HP_Photosmart_D5300_series.print_bgimages
false
print.printer_HP_Photosmart_D5300_series.print_command
print.printer_HP_Photosmart_D5300_series.print_downloadfonts
false
print.printer_HP_Photosmart_D5300_series.print_edge_bottom
0
print.printer_HP_Photosmart_D5300_series.print_edge_left
0
print.printer_HP_Photosmart_D5300_series.print_edge_right
0
print.printer_HP_Photosmart_D5300_series.print_edge_top
0
print.printer_HP_Photosmart_D5300_series.print_evenpages
true
print.printer_HP_Photosmart_D5300_series.print_footercenter
print.printer_HP_Photosmart_D5300_series.print_footerleft
&PT
print.printer_HP_Photosmart_D5300_series.print_footerright
&D
print.printer_HP_Photosmart_D5300_series.print_headercenter
print.printer_HP_Photosmart_D5300_series.print_headerleft
&T
print.printer_HP_Photosmart_D5300_series.print_headerright
&U
print.printer_HP_Photosmart_D5300_series.print_in_color
true
print.printer_HP_Photosmart_D5300_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_left
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_right
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_top
0.5
print.printer_HP_Photosmart_D5300_series.print_oddpages
true
print.printer_HP_Photosmart_D5300_series.print_orientation
0
print.printer_HP_Photosmart_D5300_series.print_pagedelay
500
print.printer_HP_Photosmart_D5300_series.print_paper_data
9
print.printer_HP_Photosmart_D5300_series.print_paper_height
11.00
print.printer_HP_Photosmart_D5300_series.print_paper_size_type
0
print.printer_HP_Photosmart_D5300_series.print_paper_size_unit
1
print.printer_HP_Photosmart_D5300_series.print_paper_width
8.50
print.printer_HP_Photosmart_D5300_series.print_reversed
false
print.printer_HP_Photosmart_D5300_series.print_scaling
1.00
print.printer_HP_Photosmart_D5300_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_D5300_series.print_to_file
false
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== Firefox version
==
3.6.3
== Operating system
==
Windows Vista
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdivxplayerplugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*6.0.12.732
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*DivX Web Player version 2.0.0.254
*GEPlugin
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*RealPlayer(tm) HTML5VideoShim Plug-In
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

Mark Leary:
As TXGuy posted above:
See:
https://support.mozilla.com/en-US/kb/Unexpected+installation+error+-203+when+installing+add-ons
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203
Also see:
http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile
http://kb.mozillazine.org/Show_hidden_files_and_folders

I am trying to move my itunes library from my old pc to my new imac, home sharing is on and I can see the shared library. My problem is that when I check the shared library to import it to my imac I cannot import it. Can anyone help me?

I am trying to move my itunes library from my old pc to my new imac, home sharing is on and I can see the shared library. My problem is that when I check the shared library to import it to my imac I cannot import it. Can anyone help me?

You need to transfer the iTunes Library from the most recent backup you made before the hard drive was replaced.
You can't transfer the full iTunes Library from the iPad back to iTunes.
There are third-party Windows applications that will transfer data from an iOS device, but they don't re-create the iTunes Library exactly as it was before.

Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).

Hi,
Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
I have done some Google and found that we need to add something in Essbase.cfg file like below.
1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
Possible Problems
Analytic Services could not lock enough blocks to perform the calculation.
Possible Solutions
Increase the number of blocks that Analytic Services can allocate for a calculation:
Set the maximum number of blocks that Analytic Services can allocate to at least 500.
If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
Stop and restart Analytic Server.
Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting.
Determine the block size.
Set the data catche size.
Actually in our Server Config file(essbase.cfg) we dont have below data added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work? and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
Regards,
Naveen

Your calculation needs to hold more blocks in memory than your current set up allows.
From the docs (quoting so I don't have to write it, not to be a smarta***:
CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
Example
If the essbase.cfg file contains the following settings:
CALCLOCKBLOCKHIGH 500 CALCLOCKBLOCKDEFAULT 200 CALCLOCKBLOCKLOW 50
then you can use the following SET LOCKBLOCK setting commands in a calculation script:
SET LOCKBLOCK HIGH;
means that Essbase can fix up to 500 data blocks when calculating one block.
Support doc is saying to change your config file so those settings can be made available for any calc script to use.
On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact.

HT4623 I have an IPhone4 and is updated with version 6.1.3 and I am not able to connect with face time calls. I have checked the date ant time. I used to be able to use face time with no problem. since the late os upgrace I have not been able to connect w

I have an IPhone4 and is updated with version 6.1.3 and I am not able to connect with face time calls. I have checked the date ant time. I used to be able to use face time with no problem. Since the late os upgrace I have not been able to connect with face time.

Read http://support.apple.com/kb/ts3367

An unexpected error occurred processing your request. Check the logs for details and correct the problem.

Hi All,
I am configuring RSS Viewer webpart to SP 2013.
But i am getting an error "An unexpected error occurred processing your request. Check the logs for details and correct the problem."
I looked for solution of this error. i got to know, we need to set proxy server in web.config file.
So, in order to resolve this i put the following set of code in web.config and save the file
<system.net>
<defaultProxy>
<proxy usesystemdefault="True" proxyaddress="http://myproxyserver" bypassonlocal="True" />
</defaultProxy>
</system.net>
But, still i am getting the error.
What could be the problem now.
Any help is much appreciated.
Thanks,
Rakesh

Hi Rakesh,
According to your description, my understanding is that you got an error when you used RSS viewer web part in SharePoint 2013.
The RSS viewer web part uses authentication delegation and is using the current user's credentials to access the proxy. However, the RSS viewer only supports anonymous and Kerberos authentication. So if you are using NTLM authentication, the RSS viewer will
not be able to authenticate the user through the proxy. More information, please refer to the link:
http://kalsing.blogspot.com/2007/11/troubleshooting-rss-viewer-web-part.html
Also see:
http://blogs.technet.com/b/sharepointdse/archive/2007/04/13/fun-with-rss.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

There was a problem connecting to the server...please check the share name..every 3 seconds. made computer useless

there was a problem connecting to the server...please check the share name..every 3 seconds. made computer useless. Lion. It only complains about one of my PCs that usually shares OK with the imac.

First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
 ▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

There was a problem connecting to the server "Time Capsule". The share does not exist on the server. Please check the share name, and then try again.

The following error pop's up as an [OK] dialogue box after logging in the iMac,
There was a problem connecting to the server "Time Capsule".
The share does not exist on the server. Please check the share name, and then try again."
As it happens, a connection to the Time Capsule is established usually, anyway. On occasion it doesn't.
I have a Volume, Data, on the capsule, which similarly, usually mounts, but occassionally doesn't, with access permissions denied.
Any suggestions on how begin to work out how to achieve networking seamlesness?

First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
 ▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

TS2516 an error occurred uploading my iPhoto Book order. It puts the book together and starts to send but at the very last moment comes up with an error message. but checking the book in iPhoto there are no problems to be found.

an error occurred uploading my iPhoto Book order. It puts the book together and starts to send but at the very last moment comes up with an error message. but checking the book in iPhoto there are no problems to be found.

This user talked to Apple Support personnel and confirms what Larry is suggesting:
crowland1066
Re: book upload fails
Nov 30, 2013 3:02 PM (in response to pablo123)
Just got off the phone with apple support. If the photo book completes the assembly process but fails during the upload process the problem is in their overloaded servers.They just started a free shipping promotion for the holidays which has increased the traffic dramatically. I bought a calendar a week ago and it went right through. I'm going to try again during less peak times.
Happy Holidays

I have problem syncing my music to ipad. Most of the songs are duplicated but only in ipad. I checked the music library in itunes and there didn't have the duplicated songs like in the ipad. I can not delete the duplicated songs inmy ipad.

I have problem syncing my music to ipad. Most of the songs are duplicated but only in ipad. I checked the music library in itunes and there didn't have the duplicated songs like in the ipad. I can not delete the duplicated songs inmy ipad.

Hi, Abril_Perez17.
This may be related to a new feature embedded in iOS7 that shows all purchased music by default. Go to Settings > Music, then turn off Show All Music. See if the issue ceases once the feature has been disabled. This information is located on page 63 of the user guide below.
iPhone User Guide
Regards,
Jason H.

I am suddenly having a problem printing 4x6 photos. The print as though starting in the middle of an 8x10 sheet. I've checked and double-checked the print settings. Anyone else have this problem?

I am suddenly having a problem printing 4x6 photos. The print as though starting in the middle of an 8x10 sheet. I've checked and double-checked the print settings. Anyone else have this problem?

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

When i try to sync contact via itunes to outlook, it doesnt get sync, even i checked the sync contact with outlook. Can anyone guide whats the actual problem.

When i try to sync contact via itunes to outlook, it doesnt get sync, even i checked the sync contact with outlook. Can anyone guide whats the actual problem?

I have similar problems trying to synchronize my calendar, also after update on 7.1.1. on my Iphone 5.
It doesn;t replace the outlook entries on Iphone 5.
I didn,t try to synchronize the contacts, because it may fail.
Has any one an idea what could be the reasson for thid synchronize problems.

In iTunes I'm having problems changing the "Media Kind" with a number of playlists in the OPTIONS menu from "music" to "audiobook". After going through the steps, the next time I check the items have reverted back to "music". What step am I missing?

In iTunes I'm having problems changing the "Media Kind" in the OPTIONS menu from "Music" to "Audiobook". After going through the steps, the next time I check, the items have reverted back to "Music". What must I do to save it as an "Audiobook"?

After more digging in the Support section here and some Google work, I turned off iTunes Match and lo and behold! I can change the media kind to Audiobook! So, it looks like iTunes Match locked the files up somehow and for some reason.
I went into iTunes Store > iTunes Match > "No, Thanks" to disable it on the local PC.

[SOLVED]problem about wc to check the amount of the processes through

#problem about wc to check the amount of the processes through ps
hi.this is the processes current
$ps
PID TTY TIME CMD
2674 tty3 00:00:00 bash
2689 tty3 00:00:00 mocp
2746 tty3 00:00:00 ps
$ps | wc -l
5
The problem:since there are 4 lines of ps output here,why wc -l shows the number "5"?
And if i redirect ps to a file and then check the lines number with "wc -l",it's "4".
$ps > out
$cat out
PID TTY TIME CMD
2674 tty3 00:00:00 bash
2689 tty3 00:00:00 mocp
2753 tty3 00:00:00 ps
$cat out | wc -l
4
Any idea?Thanks.
Last edited by wanghonglou82 (2011-10-07 06:49:44)

falconindy wrote:Working as intended. wc is running when you pipe ps to it.
hi.thank you.
The clue you bring here sounds reasonable.But a little more confusion to me comes around.I will check the bash rules for digest commands.thanks.

To check the problem in the scenario

Similar Messages

Maybe you are looking for