To configure sap workflow with EP

HI,
can we connect customizing made in SAP workflow with EP may be with UWL through webdynpro...?
Thanks in advance

It is possible. You can mail me at [email protected] for further information on this.

Similar Messages

Configure sap xi with third party application?

Hi fredz,
Can any pls explain with technical details and steps how do i configure sap xi with third party application and what type of connectivity and interfacing communication channel is preffered?
Is there any option to web-services for interfacing between SAP system-SAP XI system-Third party Application.
Pls be specific if and only if u have done this scenario.
Regards,
Ameet
Message was edited by:
Ameet Jassani
Message was edited by:
Ameet Jassani

Hi
 
This is a very generic question. There are some getting started guides available in the main XI section on SDN, and also some step-by-step guides in the wiki section. A quick search will get you tons of information.
 
The choice of connectivity and interfacing communication channel is really dependent on the capabilities of the third party system.
 
Also, to get good results on this forum, please read the <a href="https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement">rules of engagement</a>
 
Regards
Manish

Including SAP Workflow with TDMS timeslice

Hi there,
we would like to include the SAP Workflow in a TDMS timeslice for an ECC6 system. By default this is excluded as described in note 1159279.
On this forum I found a posting [TDMS : Does not transfer content from certain area; which tells you basically which tables to include. Below an overview from the tables mentioned in the other posting.
The following tables are involved in Workflow:
SWW_CONT u2013 Container Contents for Work Item Data Container
SWW_CONTOB u2013 Container Cont. for Work Item Data Container (Only Objects)
SWWLOGHIST u2013 History of a work item
SWWORGTASK u2013 Assignment of WIs to Org. Units and Tasks
SWWUSERWI u2013 Current Work Items Assigned to a User
SWWWIHEAD u2013 Header Table for all Work Item Types
SWD_BINDEF u2013 Workflow definition binding
SWD_CONDEF u2013 Workflow definition: Binding (runtime + definition)
HRP1000 u2013 object description
HRP1001 u2013 object relationship
My question is : Can anyone confirm that these tables are the only one or do we need to include more tables? SAP is not confirming this as they say that we should ask for consulting services regarding this question.
kind regards
Herman Berkhoff

It is suggested that you start with this set of tables and once the target system is build do the necessary validation and in case you find that you need to transfer any other table the same can be done using the TDMS troubleshooter.

SAP workflow with java

Hello , i new to SAP systems with Java Language.
I need help for starting a workflow in sap using java language specially how to pass the TASK parameter like WS97xxxxx…

This is not a SAP forum. Even if it were a SAP forum, you're not even asking any kind of question!

Inbound Email configuration - SAP CRM with MS Exchange Server

Dear Pundits,
We are implementing SAP CRM and one of the requirement is to configure the Inbound email functionality.
As of now, we have successfully configured the outbound mail functionality.
The inbound email functionality to a Single client:
Our MS Exchange Server Domain is ITAstute.com.
Where as, on the CRM system, under SCOT transaction --> Settings --> Default Domain, we have entered the Domain name as
crm-dev.itastute.com
We are planning to receive emails for different email id's like service, complaints, and so on into our SAP system.
How will the exchange server can direct the mails from above external emails from domail itastute.com to onto CRM server domain crm-dev.itastute.com????
Thank you,
Nikee

Then you need to define the routing rule in the exchange server.
Exchange server config is outside the SAP scope and you should contact your exchange admin to get it done.
Also they might force you to use the port 25 if you have any policy such in your company.
We used the routing rule from exchange to BIGIP and BIGIP to our SAP server, that way we could use different port.
You could search in google for the steps and i come accross the link given below.
See if its useful.
Link: [exchange rule|http://www.petri.co.il/forums/showthread.php?t=13120]
Additional input related to the rule.
you need to define the virtual host if you have more than one client that need to be configured for inbound routing.
*@crm-dev.itastutecom => * applies to any user in your system and crm-dev.itastutecom should be your virtual host.
janus.itastute.com => is your hostname and define port number for each client that need to configured.

Cook required for SAP workflow configuration

Hi Folks,
I need a cook book which explains how do we configure SAP workflow.
Thanks,
Imran

Just buy Practical Workflow for SAP 2nd Edition. There is no "cookbook" available in internet. There are some good tutorials etc. Have you gone through the SDN workflow wiki?
Regards,
Karri

Set up Workflow with Lotus Notes

Does anybody know a procedure or a guide to configure the Sap Workflow with Lotus Notes?
I would like to do a scenario looks like follow:
- a user create a purchase order on Sap;
- the workflow system sends a email to an approver (to Lotus Notes);
- the approver reads the email and can approve or reject. This step is done inside Lotus Notes.
Thanks in advance for any help.
Renato.

Hi ,
You can achieve it in following simplest
1. Create a simple BSP page for approval and Rejection.
Send the link of this page in the mail to the lotus notes server . Lotus notes user will open the mail and he will click on the link to get the BSP page .
Handle the process that should happen after the user makes an action in the "OnInputProcessing" event of the BSP page.
Pls reward if useful.
Regards,
Laxman Nayak.

How to configure sap maxdb client to connect to SAP ERP system (SAP HR)

Hello all,
I am currently installing live cache for SAP ERP HR application(Idoc), can anybody tell me the sequence to proceed to configure SAP livecache with SAP ERP system. i am doing following steps
1. Install SAP DB using installation MAXDB CDs
2. Install SAP Livecache and standalone server SCM 5.0 using SAP ERP master and Livecache dvds.
3. install Livecache client fromSAP ERP master and livecache dvds between SAP ERP and livecache server.
4. configure in LC10, tcode.
but when i press on livecache monitoring in LC10 it gives me following error.
Command: DBMRFC
Parameter: -gsapfive -xsapgw00
SY-SUBRC: 8
Return Code
sap maxdb client

i tried the said things and after that i am getting following error in DB59, first three steps are successful but 4 one is failing.
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: <hostname>_<SID>_00 ( Windows NT )
1. Connect. test with "dbmcli db_state" Successful
2. Connect. test with command mode "dbmrfc db_state" Successful
3. Connect. test with session mode "dbmrfc db_state" Successful
4. Connect. test with "native SQL" ( LCA ) No connection
 SQL Code: 4008
 POS(1) Unknown user name/password combination
 For detailed information, see the developer trace for work process: 1
please see trace from file dev_rfc and dev_w0 below
log for dev_rfc
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: MKUMAR (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
Log from dev_w0
A RFC 1485 CONVID 47150684i tried the said things and after that i am getting following error in DB59, first three steps are successfuk but 4 one is failing
trace from file dev_rfc is below
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: ABC (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
A RFC 1485 CONVID 47150684
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: abc (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47149684, {FDB31AE0-D203-F1C0-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host <HOSTNAME> / sapgw00
M * ERROR program IDOCTEST not registered
M *
M * TIME Fri Jan 07 18:15:25 2011
M * RELEASE 701
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 679
M * MODULE gwr3cpic.c
M * LINE 1778
M * DETAIL TP IDOCTEST not registered
M * COUNTER 715
M *
M *****************************************************************************
M
A RFC 1485 CONVID 47152747
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: ABC (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47151731, {FDB31AE0-D203-F1C1-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Mani

Ad Hoc Workflow with SAP EP6

Hi,
I have to configure Ad Hoc workflow with EP6. How can I configure it? Any document will help me.
Is Universal Worklist cofiguration is also required for Ad Hoc Workflow?
Regards,
Manish

try this link
http://help.sap.com/saphelp_nw04/helpdata/en/8f/fb5464e3382f4482833a28af8896a3/frameset.htm
Click on Administration guide, basic configuration, this will start to walk you though the configuration of collaboration. Ad hoc work flow is a part of the Universal Worklist. The Universal Worklist is the aggregation of your R3 workflow tasks plus your Ad Hoc workflow tasks.

How to Configure Workflow with Standard TCODE

Hello Gurus,
I am new in Workflow. I have to trigger the workflow on the transaction MM02 on changing Material Plant Status to 41. I have ZECN object. but I am not aware with how this object is trigger on change of Material Status. Please tell me the process of attaching the workflow to standard tcode. With Important Workflow TCODE.
Thanks,
Sandeep Thakare

There are many ways to trigger workflow.
Example 1) Trigger it from change object.
2) From function module or class.
However, There is no configure to bind the event with transaction code.
In your case, you can use change document object MATERIAL to trigger a business object BUS1001 event.
you can use transaction SWEC to trigger the event and use transaction SWETYPV to bind event with workflow.
for basic workflow go to [SAP Workflow Help|http://help.sap.com/erp2005_ehp_04/helpdata/DE/fd/517b42303e0e53e10000000a155106/frameset.htm].
Good luck,
Chaiphon

CAF Java-Based COs with SAP Workflows as Runtime Environment?

Hi Folks,
we have a big CAF project hitting us at the moment.
Due to the heavy load we expect we do want to have the traditional SAP workflows as the runtime environment for our GPs.
As far as I know we can transfer WFs designed with CAF GP to the R/3 WF system, right?
My question is know: Can we still develop in Java our CAF objects and use them as we would do that in a portal based GP??
If this should be possible - is this creating an overhead killing the benefit we gain by shifting from portal to the ABAP stack?
Any hint is appreciated!
helge

Hi Helge,
Technically, there is no transfer from Guided Procedures to the R/3 Workflow since the process definitions still stay in the GP Design Time. The business logic still takes place on the Java Stack. Only the low-level workflow operations are delegated to the r/3 Workflow.
That's a difficult dilemma that you are facing right now. As far as I know, the configuration to get Guided Procedures running against the Business Workflow (R/3 Workflow) is quite complex and time consuming. Main pain points are callbacks registrations for background steps, user mapping and endpoints configuration. These are the main tasks. But to reach the right configuration, you will have to be tricky and patient.
Furthermore, there will be an overhead due the RFC Roundtrips between the Java Stack and the ABAP Stack.
Hope this helps you.
Best regards,
David

How to route the information to approver with out involving sap workflows.

Hi Developers,
i have a doubt regarding how the requester filled form information will be send to approver with out involving SAP workflows in the portal.
Normally i know the procedure where users fills the form with the approver details, the filled information is routed to approver UWL by trigerring a function module thru webdynpro.
But i need to know is there any procedure to route the information without involving any backends.
Thanks in Advance.

Michele is correct - sneep will help you get the serial from the running domain on the M3000 ,
and it is a good idea to install STB on your machines.
If that isn't possible for you, then sneep can be downloaded directly from [http://www.sun.com/sneep]
I believe that on this platform, sneep gets the serial from the output of prtconf.
There is a minor correction to be made :
After installed SNEEP use "man sneep" for all technical details.The sneep man page is not linked into the shared man pages, so you need to use
man -M /opt/SUNWsneep/man sneep
with out going to OK prompt (Banner)It is worth noting that the serial shown in the OBP banner is not the product serial
that you will find on the physical serial tag.
The banner "serial" is the decimal equivalent of the host ID, which you normally get in hexadecimal from the "hostid" command.

SAP HANA Cloud Portal : Configuration of HCP with Cloud For Customer

Hi Experts,
In our organization we have C4C system we have requirement to configuration with SAP HANA cloud Portal.
1) What are the steps require in Cloud For Customer?
2) What are the steps require to access the HANA Cloud Portal and Configure it?
3) How to integrate Cloud For Customer with HCP?
4) How to create Websites and Add the Widget for Tickets and Service request created from cloud for customer?
Any Documentation for this Cloud For Customer and HANA Cloud Portal Configuration please share with me.
Many Thanks,
Mithun

hi,
Please find below the avilable public information about Support site edition -
Support Site Overview : http://scn.sap.com/docs/DOC-50078
Support Site (blog post)http://scn.sap.com/community/hana-cloud-portal/blog/2013/12/12/deliver-exceptional-customer-service-with-cloud-based-support-portal
CAC Admin guide - (search for configuring portal) - http://help.sap.com/saphelp_sapcloudforcustomer/en/PDF/EN-2.pdf
Cloud Portal configuration guide - SAP Mobile Documents
Soon we will put all public guides in a central location.
Thanks,
Inbal

Workflow Configuration has completed with error for OWF 2.6.4 on 11g DB

###Problem description###
After installing Oracle DB 11.1.0.6 and configured the dbconsole, for setting up OWF have run the %ORACLE_HOME%\owb\wf\install\wfinstall.bat
The input parameters were configured as to the information from http://www.oracle.com/technology/obe/11gr1_owb/owb11g_update_extend_knowledge/less1_setting_up/less1_setting_up.html.
Unfortunately the process does not complete successfully and the log file contains the following errors:
================================================================================================
1.
WorkflowCA: SQLPLUS:SYS/ /nolog @E:\Oracle\product\11.1.0\db_1\owb\wf\sql\wfsysgnt.sql OWFMGR <WFCA WF PASSWORD> <WFCA SYS PASSWORD> USERS TEMP
WorkflowCA: ORA-01775: looping chain of synonyms
WorkflowCA: WorkflowCA: SQLException during execution: java.sql.SQLException: ORA-01775: looping chain of synonyms
: grant execute on xmldom to OWFMGR
2.
WorkflowCA: SQLPLUS:OWFMGR/<WFCA WF PASSWORD> @E:\Oracle\product\11.1.0\db_1\owb\wf\sql\afsvcdat.sql
WorkflowCA: java.sql.SQLException: ORA-04063: package body "OWFMGR.WF_EVENTS_PKG" has errors
ORA-06508: PL/SQL: could not find program unit being called: "OWFMGR.WF_EVENTS_PKG"
ORA-06512: at line 3
3.
WorkflowCA: SQLPLUS:OWFMGR/<WFCA WF PASSWORD> @E:\Oracle\product\11.1.0\db_1\owb\wf\sql\wfsvcdat.sql
WorkflowCA: java.sql.SQLException: ORA-04063: package body "OWFMGR.WF_EVENTS_PKG" has errors
ORA-06508: PL/SQL: could not find program unit being called: "OWFMGR.WF_EVENTS_PKG"
ORA-06512: at line 3
4.
WorkflowCA: Executing :E:\Oracle\product\11.1.0\db_1\jdk\bin\java -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\admin.jar ormi://localhost:6041 oc4jadmin welcome -application WFALSNRSVCApp -testDataSource -location jdbc/WorkflowDS -username OWFMGR
WorkflowCA: :null for app:WFALSNRSVCApp
WorkflowCA: subprocess.getOut():
WorkflowCA: subprocess.getOut(): Error: Unable to find the administrator for application WFALSNRSVCApp
WorkflowCA: Created a redirected data source with application WFALSNRSVCApp : E:\Oracle\product\11.1.0\db_1\jdk\bin\java -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\admin.jar ormi://localhost:6041 oc4jadmin welcome -application WFALSNRSVCApp -installDataSource -url jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=BI221WIN))) -username OWFMGR -password ->pwForOwfMgr -className com.evermind.sql.DriverManagerDataSource -location jdbc/WorkflowDS -xaLocation jdbc/xa/WorkflowDS -ejbLocation jdbc/WorkflowDS -connectionDriver oracle.jdbc.driver.OracleDriver
WorkflowCA: Executing :E:\Oracle\product\11.1.0\db_1\jdk\bin\java -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\admin.jar ormi://localhost:6041 oc4jadmin welcome -application WFMLRSVCApp -testDataSource -location jdbc/WorkflowDS -username OWFMGR
WorkflowCA: :null for app:WFMLRSVCApp
WorkflowCA: subprocess.getOut():
WorkflowCA: subprocess.getOut(): Error: Unable to find the administrator for application WFMLRSVCApp
WorkflowCA: Created a redirected data source with application WFMLRSVCApp : E:\Oracle\product\11.1.0\db_1\jdk\bin\java -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\admin.jar ormi://localhost:6041 oc4jadmin welcome -application WFMLRSVCApp -installDataSource -url jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=BI221WIN))) -username OWFMGR -password ->pwForOwfMgr -className com.evermind.sql.DriverManagerDataSource -location jdbc/WorkflowDS -xaLocation jdbc/xa/WorkflowDS -ejbLocation jdbc/WorkflowDS -connectionDriver oracle.jdbc.driver.OracleDriver
WorkflowCA: subprocess.getOut(): Invalid input arguments.
WorkflowCA: Workflow Configuration has completed with error.
WorkflowCA: Terminating...
================================================================================================
The data-sources.xml files for the WFALSNRSVCApp and WFMLRSVCApp from E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\OC4J_Workflow_Component_Container\application-deployments are configured as:
<?xml version = '1.0' encoding = 'UTF-8'?>
<data-sources>
<managed-data-source user="OWFMGR" password="OWFMGR" connection-pool-name="jdbc/WorkflowDS_connectionPool" jndi-name="jdbc/WorkflowDS" name="jdbc/WorkflowDS_jdbc/WorkflowDS"/>
<connection-pool name="jdbc/WorkflowDS_connectionPool">
<connection-factory factory-class="oracle.jdbc.driver.OracleDriver" user="OWFMGR" password="OWFMGR" url="jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=BI221WIN)))"/>
</connection-pool>
</data-sources>
(Is it possible to reinstall only the wf part of the 11g database as to attempt a fresh installation, not only to drop the OWFMGR schema as the oc4j wf instance remains unchanged? Have searched in OUI for this option but did not find the setting for removing only the workflow for reinstalling)
Thank you!!!

Hi Srini,
Thank you very much for your help. Have reviewed the mentioned notes, but unfortunately no information was contained concerning the encountered error.
As to try and address the situation, have completely re-installed Oracle DB 11.1.0.6 and still the workflow installation ends in error. I have to mention that it is a completely fresh installation, no modifications were made to the base configuration.
For windows the installation steps reference only running the wfinstall.bat script with the appropriate parameters for installing Oracle Workflow, but unfortunately it appears that the installation documentation is lacking some necessary steps as on a out of the box install the process does not complete successfully. The mentioned notes: 266612.1 and 351873.1 do not contain the information for troubleshooting the encoutnered issue.
The environment: Microsoft Windows Server 2003 R2 64b Operating System with Oracle DB 11.1.0.6
LOG Extract detailing the encountered issue:
WorkflowCA: Deploy WF Applications: Windows 2003
WorkflowCA: OC4J_Deploy Command: E:\Oracle\product\11.1.0\db_1\jdk\bin\java -Djava.security.properties=E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\config\jazn.security.props -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\oc4j.jar -userThreads -config E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\OC4J_Workflow_Component_Container\config\server.xml
WorkflowCA: Workflow component container deployed in OC4J: E:\Oracle\product\11.1.0\db_1\jdk\bin\java -Djava.security.properties=E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\config\jazn.security.props -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\oc4j.jar -userThreads -config E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\OC4J_Workflow_Component_Container\config\server.xml
WorkflowCA: Executing :E:\Oracle\product\11.1.0\db_1\jdk\bin\java -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\admin.jar ormi://localhost:6041 oc4jadmin welcome -application WFALSNRSVCApp -testDataSource -location jdbc/WorkflowDS -username OWFMGR
WorkflowCA: :Data source jdbc/WorkflowDS is not available. for app:WFALSNRSVCApp
WorkflowCA: subprocess.getOut():
WorkflowCA: subprocess.getOut():
WorkflowCA: Created a redirected data source with application WFALSNRSVCApp : E:\Oracle\product\11.1.0\db_1\jdk\bin\java -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\admin.jar ormi://localhost:6041 oc4jadmin welcome -application WFALSNRSVCApp -installDataSource -url jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=BI221WIN))) -username OWFMGR -password ->pwForOwfMgr -className com.evermind.sql.DriverManagerDataSource -location jdbc/WorkflowDS -xaLocation jdbc/xa/WorkflowDS -ejbLocation jdbc/WorkflowDS -connectionDriver oracle.jdbc.driver.OracleDriver
WorkflowCA: Executing :E:\Oracle\product\11.1.0\db_1\jdk\bin\java -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\admin.jar ormi://localhost:6041 oc4jadmin welcome -application WFMLRSVCApp -testDataSource -location jdbc/WorkflowDS -username OWFMGR
WorkflowCA: :Data source jdbc/WorkflowDS is not available. for app:WFMLRSVCApp
WorkflowCA: subprocess.getOut():
WorkflowCA: subprocess.getOut():
WorkflowCA: Created a redirected data source with application WFMLRSVCApp : E:\Oracle\product\11.1.0\db_1\jdk\bin\java -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\admin.jar ormi://localhost:6041 oc4jadmin welcome -application WFMLRSVCApp -installDataSource -url jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=BI221WIN))) -username OWFMGR -password ->pwForOwfMgr -className com.evermind.sql.DriverManagerDataSource -location jdbc/WorkflowDS -xaLocation jdbc/xa/WorkflowDS -ejbLocation jdbc/WorkflowDS -connectionDriver oracle.jdbc.driver.OracleDriver
WorkflowCA: subprocess.getOut(): Invalid input arguments.
WorkflowCA: subprocess.getOut():
WorkflowCA: Created obfusticated password for redirect datasource: E:\Oracle\product\11.1.0\db_1\jdk\bin\java -Djava.security.properties=E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\config\jazn.security.props -Doracle.security.jazn.config=E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\OC4J_Workflow_Component_Container\config\jazn.xml -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\jazn.jar -user oc4jadmin -password welcome -adduser jazn.com pwForOwfMgr <WFCA WF PASSWORD>
WorkflowCA: subprocess.getOut():
WorkflowCA: subprocess.getOut():
WorkflowCA: Executed OC4J Admin script to shut down the OC4J instance : E:\Oracle\product\11.1.0\db_1\jdk\bin\java -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\admin.jar ormi://localhost:6041 oc4jadmin welcome -shutdown
WorkflowCA: Mon Mar 22 06:29:25 EDT 2010
WorkflowCA: Workflow Configuration has completed with error.
WorkflowCA: Terminating...
Thank you again for all your time and help!!!

Adobe forms using Workflow with normal SAP

Hi All,
Can any one help me, how to assign Adobe forms to Workflow with normal SAP.
Thanks,
Archana.

Hi,
The std. PCR (Process Change Request) workflow use Adobe forms.
BO is BUS7051,The std. workflows are
   WS50000041
   WS50000042
   WS03100019
   WS21300032
Check this [link|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d1cb99-46cf-2b10-8880-85004a301283]
Regards,
Surjith

To configure sap workflow with EP

Similar Messages

Maybe you are looking for