To Control print option in VA22 or VA23

Dear Experts,
Could you kindly let me tell me how to control and stop print option in
VA22 or VA23 initial screen and issue output.
Is there any user exit then can u porovide me or any other detail would be of great help.
Regards,
Siva

this was done

Similar Messages

Controlling print options esp. fit to page

is there a way to control print options, particularly fit to page, from within the PDF itself?
We provide print ready files for our clients who print them as needed, but they are brochures that are set up for fit to page OFF, otherwise the white border (because it can't bleed) around it is uneven.
So they would send the file to our print shop and the printer would automatically print it with this option off, based on the pdf settings for that document.

Go to Properties (Crtl+D) and the advanced tab, you can set the print porperties that will come up by default there, it is still possible to over ride them though.

OBIEE 11g Controlling Print Option in Dashboard

Hi All,
We have a requirement in which we need to secure Print and Export option to specific users/groups only. OBIEE does not have any security option by which we can restrict print option to specific groups.
Only 1 option is to create multiple sections and apply security on the sections. This is what I can think of.
Please suggest me if there are any workarounds so that we can restrict print and export option only to certain groups.
Thanks in advance.

Could any one please suggest.

Controlling print options through triggers

Hi,
I developed a report which runs in 2 modes.
1. Automatic mode(runs in a request set)
2. Manual Mode(submitted manually through SRS as a single request)
I got a new requirrment where I need to print the output when print flag is Y and the report is in Automatic mode.
Always print when in manual mode.
After a bit of googling, I found this API
fnd_request.set_print_options (printer =>’<printer name>’,
style =>’PORTRAIT’,
copies=>1,
save_output => TRUE,print_together => ‘N’)
would it work in my case?
If so, I am guessing that I will have to use in After Report Trigger.
Thanks,
Rakesh

Rakesh,
I suggest you you post your question in the [EBS General Discussion|http://forums.oracle.com/forums/forum.jspa?forumID=475] forum. You should get a much faster response to your question. It's my understanding that EBS controls whether output is automatically printed through a User Profile setting. Its been a while since I've worked with the EBS so I could be wrong.
Craig...

Controlling print options in acrobat

Hi,
I am new to this forum. Just started using acrobat at work and i need some help. I was wondering if it is possible to set the print feature to make a pdf not printable until you select a checkbox in it, then the pdf would be able to print. If this is possible could you tell me how to do this or where to go to learn how?
Thanks

You will have to use JavaScript to test the conditions and make the button visible. But you will not be able to stop the use of the menu action "File => Print" or the <Ctrl> +"P" keystroke action.

PRINTING OPTION CONTROLL

hi
can anybody tell me how to control the printing option in the run time with the help of oracle developer (form-6i). i mean i dont want to take the default but create it manually.
i.e every option of printing can be manupulated programmatically at form level.
please help me.............

Hi.,
check this thread., removed by moderator. Please do not just post links.
If you need printing functionality you have to use ALV_TREE.
The Column_TREE doesnt provide this option.
for displaying., check FM RS_TREE_LIST_DISPLAY.
hope this helps u.,
Thanks & Regards
Kiran
Edited by: Neil Gardiner on May 18, 2011 3:18 PM

How to set print option for a Billing document using T-code VF02

Hi All,
Please suggest me the way to set print option for a Billing document for T-code VF02 and please let me know how to get print preview for any particular Billing document?
regards
Anand.

Enter the billing documents detail
Goto Goto> Header>Output.
Check the status for your output type in this screen.
If it is green then come back to the VF03 screen.Enter the billing document number.
Click on Billing document-->Issue output to.
Press (CtrlShiftF1) or click on the icon beside "Print options".
Here you can see the print preview.
If the status is red then click on the processing log.Here you will get the error messages.
If the status is in yellow colour,then click on the "Further Data" button
Set "Dispatch time" as "4 Send immediately (when saving the application)"
Before the print preview option you should make sure you have added correct output type to the relevant billing document. To do that, go to transaction VF02.
Enter the billing document no
Go to Menu option -> Go to -> Header -> Output
In that screen you have to add relevant output type. (Standard output type is RD00)
Add that & press enter key
Highlight that line & press "Further Data" button
Set "Dispatch time" as "4 Send immediately (when saving the application)"
Press "Back" Button
again select that line & go to "Communication method" button
Set "Logical destination" as LOCAL"
Don't mark "Print immediately" & "Release after output" ticks. If you mark them, sa soon as you save the billing document, you'll get a print out.
Press "Back" Button
Save
Now form the initial "Change Billing Document" screen, Go to Menu option; Billing Document -> Issue Output to
You can see that output type line appear.
select that line & press "Print Preview" button or (CTRLSHIFTF1)
You can see the print preview.
Alternatively you can use VF31 to print multiple print outs at same time.
If you want to get PDF outputs of billing documents, go to your printer settings in the your computer from Control Panel.
Set PDF Writer as "Default Printer" (Right click & select "Set as Default Printer")
Then normal way, print the billing from SAP.
It'll automatically send to your PDF writer. You can save it to the path you want,

HOWTO: Control Printer Attributes for a Report at Run Time Reports 6i

HOWTO: Control Printer Attributes for a Report at Run Time
Like page width , height etc
my problem is i had installed a printer and it is set for
printing different reports ( like invoice slips , legal size ,
A3 etc ) each time i have to manually set the page settup from
printer folder .instead if there is an option to set the printer
attributes from Reports 6i it is great
rajesh

All the Printer Setup(Page Height and Page Width) must be set in
the Reprot Program. These can be set at the Layout-Main Section
in the Object Navigator.
hth

Error while changing the printing options under preferences of a plan App

Hi All,
I am using EPM system 11.1.1.1.0.
I have a planning application and i am trying to chage the printing options under File-->Preferences
but when i try to save my chnage i get a IE error message on the bottom left corner of the page.
On the details this is what i can see:
Can't Move Focus to the control because it is invisible , not enabled, or of a type that does not accept the focus.
Can somebody please site a solution for this error...?
Regards.
Alicia

JohnGoodwin wrote:
Hi,
What version of IE are you using.
Have you tried going directly to planning and through the workspace route.
I notice you are on 11.1.1.1, I know many issues were fixed in 11.1.1.2, any thoughts on upgrading, though 11.1.1.3 comes out soon so it is probably best to wait.
Cheers
John
http://john-goodwin.blogspot.com/
We are encountered many unexpected issues of version 11.1.1.1. If we upgrade to version 11.1.1.3 or 11.1.2, what will be the level of resource required for the upgrade?
Thanks!

Duplex printing option no longer avaialble in Preview and TextEdit.

I am no longer offered the option to select two-sided printing for .pdfs in Preview or for text documents in TextEdit when using my HP Officejet K550. The printing options no longer allow me to select Paper Type or Print Quality for these documents either. If I open a the same .pdf in Adobe Reader or Acrobat Pro, the duplex, paper, and quality options are available. I have the latest driver and firmware updates from HP, and my Apple software is up to date. HP Support suggests it is an issue with the applications from which I'm printing (e.g. Preview).
Does anybody know why this has happened or how to restore these options when printing from Preview or TextEdit?
Intel iMac Mac OS X (10.4.9)

Since you are using an Intel Mac, the two applications you mention have been written in Universal Binary. For your HP printer driver, if it relies on print dialog extensions (pde's) to make these options available, and these same files have been written for the older Power PC processor, then this can make the options unavailable when printing from Universal applications. And that could explain why they are available when printing from Acrobat, as this is probably still the PPC version.
The solution would be to find a Universal version of the HP driver (I know you mentioned you have the latest but if its not Universal then it will have this issue).
To prove it is a Universal vs PPC issue, you can change Preview so that it opens using the Rosetta emulator. Control-click on the Preview icon and select Get Info. Select the check box "Open using Rosetta" and then close the window. Then open Preview and try to print two-sided.

Print PDF with special print options of Canon IR printer

Hi,
We have a collection (db driven) of PDF documents that we want to send to our network printers. Some document need a hole punch of some other specific printeroptions of a Canon IR printer.
The ideal solutions is a windows application where i could define virtual printers with their print options (pdf and printer specific).
Eg:
A user creates in a the windows app a virtual printer with name and print options
- FastPunch: Printer IR5570 with hole punch
- Fast: Printer IR5570
- Color: IR C4080
- ColorBooklet: IR C4080 with booklet options
When the app starts its batch it will look at de db and find rows with an PDF and the name of a virtual printer. The documents are printed with specific printer preferences.
Does someone has experience with such an solution? Tips?
Someone wants to make this in vb.net (or c#)? What cost?
gtx, Pierre

I have downloaded the Acrobat SDK but I haven't really waded through the documentation or samples yet. I've only been working on this project for about 3 days now and not full time. This isn't the highest priority at work. I've worked a bit with the adobe reader control and that looks like it has some promise.
I have two significant problems:
1) I don't want the user to see any windows appear other than my console application. That way I have it working right now, Acrobat is required and appears minimized while the file is spooled and then is closed after spooling completes. Not so horrible but I'd like to get away from it if possible. To print the file right now I'm using the startprocess module or something (new version of shell I think). I'm starting the pdf with the verb "Printto" and that tells Acrobat to print to a printer that I specify.
2)Biggest problem. I have no reliable way to change the number of copies or any other print settings. I am not willing to write a program that spools a single copy multiple times just to get multiple copies. Currently my program uses rundll to open a printer preferences dialog, and SendKeys to modify the print settings. This means that the computer cannot be used while automated printing is occurring.
Right now the program's only saving grace is that it allows the user to be ignorant of the job settings so that all the user has to do is indicate an item number and quantity and walk away (hoping nothing changes the focus and derails SendKeys - but we know that kind of thing never happens in XP :P )

Show 'Print' Option not see in view property editor

I have created a new ABAP web dynpro application and am trying to integrate it into the portal (7.0). I created a view and am trying to customize the appearance of the tray it appears in so that the user can print the view. I know that in the standard ESS functions that we have (which are WD Java) I simply found the show "print" option in the property editor and made sure it was set to yes. The problem is that while all of the other options are there (Details, help, personalize, refresh, remove, etc), unfortunately I do not see a show "print" option available in the property editor of the view. Is there any way that I can get it to show up? Is there some other parameter that controls whether it should appear.
I do see the show "print" option on the page, but my users want to see it on the view.
Thanks for your help.
Pam Laverty

Hi,
It looks like you do not have write permissions to the PCD objects and thus cannot edit them.
http://help.sap.com/saphelp_nw70/helpdata/EN/f6/2604f005fd11d7b84200047582c9f7/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/f6/2604e505fd11d7b84200047582c9f7/frameset.htm
Regards,
Praveen Gudapati

Tree view control print

Hi all
I want to set a print option for the tree view control along with back,exit etc options.please help me to do this.
Thanks in regards
Regards
Giri

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Natasa Stojovska ([email protected]):
I have a few questions about a tree view control:
1. If you put more than approximately 100 nodes in a tree, it populates too slow. There is no change if you try with query or record group. I figured that the populating of the record group makes all problems, but there is no chance to enlarge the array siye of the record group. Developer 6 has some built-ins which can do that, bu after many unsuccesful tries I don't see a solution.
I tried to make fetches from cursor into a record group (30 nodes on a "page", but it looses a real hierarchy and you should do a lot of programming). If anybody knows how to make the population of the tree faster or have some template / please forward.
<HR></BLOCKQUOTE>
Try taking out the 'start with' and 'connect by' clauses in your select statement if you're using them. However, this will mean that you will have to determine the levels of the tree manually and ensure that the data comes out in the same order each time you execute the select statement.
null

Savs as and Print options to be restricted in Portal DMS

Hi experts,
When the user opens a document in Portal DMS I need to restrict save option and print option.
Is this possible if yes could you please give me the possible solution.
Please help me in this
waititng for your response.
Regards,
Shilpa.

Hi Shilpa,
I think it can be done in client computer (windows settings)... check out this link to control the MS word pop up
http://www.shaunakelly.com/word/sharing/OpenDocInIE.html
Thanks,
Pradeep

How do I get Adobe PDF to show up as a printer option for Illustrator?

How do I get Adobe PDF to show up as a printer option for Illustrator?

It is usually at the bottom of your printers list. Do you see it on Control Panel/Hardware and Sound/Devices and Printers/Printers?

To Control print option in VA22 or VA23

Similar Messages

Maybe you are looking for