To convert or not convert...

I have four or five 15 minute movies created in FCPX, and now I want to make an one hour movie containing them all. They are exported as .mov files, HD, 1920x1080, Prores 422 HQ, stereo sound. In between each movie I will add some text titles, or Motion effecs. Would it be an advantage to let FCPX convert the movie files to prores on import or just leave them as they are? 
The new one hour movie will be exported with the same codec as the original single movies, see abowe.

Ok, thanks, thats what I thought. But FCPX ask if I want to convert on import so that made me a little confused.

Similar Messages

  • Pdf converter pro not converting all columns

    pdf converter pro not converting all columns

    I'm using FrameMaker 7.1 to create multi-file user manual books (one file = one chapter). In Book view, I use the File > Save Book As... option to create the PDFs.
    Most of the FrameMaker cross-references work in the PDF, jumping to the referenced location as expected. Not all do, however. If there is a common trait among the jumps that won't jump, I have not identified it.
    I have downloaded the entire 7.1 "upgrade library" from the Adobe Web site (one update), but the problem persists. Any thoughts would be appreciated.
    Thanks.
    DC Smith

  • Adobe PDF converter does not convert and include the videos from websites when completed

    Have just recently upgraded to Acrobat Pro X and have attempted to convert several on-line websites to PDF's.  In each and every case, the videos were not included in the final conversion to PDF.
    Not sure if there are specific settings that I need to address or if I am doing something wrong here.   Have been told by colleagues it should be a simple click to achieve these results and that Acrobat X does convert and include videos.   These videos are in Adobe Flash Player format 11.1.102.63.   Not sure where to go from here, any assistance greatly appreciated!

    In the IE toolbar, under the PDF Convert button, select Preferences. Click on the Conversion Setting button under the General tab and make sure that "Embed Multimedia Content when possible" is selected.

  • Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it?

    Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it in some other form befor dragging it?

    Hello djensen1x,
    Could you please let me know what version of Acrobat are you using.
    Also, tell me your workflow of combining those PDF files?
    Please share the screenshot of the error message that you get.
    Hope to get your response.
    Regards,
    Anubha

  • JDBC Receiver does not convert empty string to NULL

    Hello experts,
    I am facing a problem with an INSERT statement to ORACLE DB where some of the fields are empty, for example:
    - <STATEMENT_VLP_CONT_DETAILS>
    - <TABLE_VLP_CONT_DETAILS ACTION="INSERT">
      <TABLE>VLP_CONT_DETAILS</TABLE>
    - <ACCESS>
      <VLP_HDR_ID>43</VLP_HDR_ID>
      <VLP_CONT_LINE_ID>1</VLP_CONT_LINE_ID>
      <QUANTITY>1</QUANTITY>
      <OWNER>CBHU</OWNER>
      <SERIAL_NO>3372739</SERIAL_NO>
      <CONT_ISO_CODE>2300</CONT_ISO_CODE>
      <WEIGHT>6.44</WEIGHT>
      <POL>ILASH</POL>
      <POD>FRFOS</POD>
      <FD>FRFOS</FD>
      <OPER_CODE>COS</OPER_CODE>
      <CUR_STOW_LOC>150102</CUR_STOW_LOC>
      <PRV_STOW_LOC />
      <HAZARDOUS>N</HAZARDOUS>
    In the JDBC Receiver comm channel I selected: Interpretation of Empty String Values = NULL Value.
    It seems the empty strings are not converted to NULL values as can be seen in the reflected SQL statement in RWB:
    INSERT INTO  VLP_CONT_DETAILS (VLP_HDR_ID, VLP_CONT_LINE_ID, QUANTITY, OWNER, SERIAL_NO, CONT_ISO_CODE, WEIGHT, POL, POD, FD, OPER_CODE, CUR_STOW_LOC, PRV_STOW_LOC, HAZARDOUS, EMPTY, REFER, OOG, HAZARD_IMDG, TEMP_SET, TEMP_MIN, TEMP_MAX, FRONT_OVL, REAR_OVL, RIGHT_OVW, LEFT_OVW, OVERHEIGHT, COMMODITY, BOOKING_REF, ALLOTMENT, YARD_LOC, LD_SEQ_CRANEID, LD_SEQ_NUMBER, LD_STATUS, STACKABLE, OPT_PORT_CODE1, OPT_PORT_CODE2, OPT_PORT_CODE3) VALUES (44, 1, 1, CBHU, 3372739 , 2300,  6.44, ILASH, FRFOS, FRFOS, COS,   150102,         , N, N, N, N,      ,      ,      ,      ,    ,    ,    ,    ,    ,     ,             ,    ,           ,    ,    0,    64, N,      ,      ,      )
    So, I am getting the following error:
    Could not execute statement for table/stored proc. "VLP_CONT_DETAILS" (structure "STATEMENT_VLP_CONT_DETAILS") due to java.sql.SQLException: ORA-00936: missing expression
    Help would be appreciated.

    Hi Effi,
    There is a mismatch in the field and thier value.
    Here field id 37
    VLP_HDR_ID, VLP_CONT_LINE_ID, QUANTITY, OWNER, SERIAL_NO, CONT_ISO_CODE, WEIGHT, POL, POD, FD, OPER_CODE, CUR_STOW_LOC, PRV_STOW_LOC, HAZARDOUS, EMPTY, REFER, OOG, HAZARD_IMDG, TEMP_SET, TEMP_MIN, TEMP_MAX, FRONT_OVL, REAR_OVL, RIGHT_OVW, LEFT_OVW, OVERHEIGHT, COMMODITY, BOOKING_REF, ALLOTMENT, YARD_LOC, LD_SEQ_CRANEID, LD_SEQ_NUMBER, LD_STATUS, STACKABLE, OPT_PORT_CODE1, OPT_PORT_CODE2, OPT_PORT_CODE3
    And value is 35
    44, 1, 1, CBHU, 3372739 , 2300, 6.44, ILASH, FRFOS, FRFOS, COS, 150102, , N, N, N, N, , , , , , , , , , , , , , , 0, 64, N, , ,
    Give empty values for nuil fields so that they can be made NULL by jdbc adapter
    Regards
    Suraj

  • Can we control if text in a page is converted, or not, to an image?

    Hello!
    My experience tells me that if I use iWeb 1.0.1 and I put the text color with 80% opacity, for example, all text will be converted to an image. Most of the times I like this behavior, because the result is the same on every computer or browser.
    But after I update for iWeb 1.1.1 all text appears as text and no longer as images. Now, when I want some sites with the text converted to images I still use the older version (1.0.1).
    My question is: Can we control if text is converted, or not, to an image? Can we force a particular text box to be converted to an image, after 1.0.1?
    I search the iWeb forum and I have not find any answer for this particular question.
    Sorry for my english...
    Thanks!
    Power Mac G4 - 867MHz   Mac OS X (10.3.9)  

    Now answering newmacguru...
    1. Why I want text to appear as an image?
    Sometimes the graphical result is important. Most of the times, if you use a white or bright page background, what you see in iWeb is almost the same you see when browsing the page. No problem! But if the page background is black or dark, what you see when browsing the page can be different from what you see when developing the page with iWeb. And these differences can be important... Now if you tell iWeb to convert text to images, the result will be exactly the same you see in iWeb (the result you want).
    Let me show you an example. This page was published with iWeb 1.0.1. In this case all text boxes were converted to images and the result you see is exactly what I want. Normally I choose opacity of 80% in the text color to reduce the contrast between text and background (this is the graphical result I most like):
    http://clientes.netvisao.pt/3ebt2006/iweb/TesteTexto101/
    Now if you publish the page with iWeb 1.1.1/1.1.2 the result is the same for both, but different from the pages obtained with iWeb 1.0.1. I only get the result I want if the text is converted to an image (using shadow). You can also see that with a white background you get good results even if the text remains text:
    http://clientes.netvisao.pt/3ebt2006/iweb/TesteTexto111/
    http://clientes.netvisao.pt/3ebt2006/iweb/TesteTexto112/
    Thanks for the suggestion of the shadow. Sometimes using a non web safe font is not a solution, remember I want “that” graphical result...
    2. Now, considering the search engines, I think I read in this forum that the search engines can do is work, even if text is converted to images, because the text still remains in the page (sorry I don’t remember where).
    Sorry for my english...
    Power Mac G4 - 867MHz   Mac OS X (10.3.9)  

  • JRE 1.5 VS. JRE 1.6 - Could not convert socket to TLS

    I have an applet that is trying to send an email through an SMTP server. It works just fine 1.6 but on 1.5 it blows up and I'm kind of at the end of my rope. Any help here would be great.
    I've had to set up the DummySSLSocketFactory as described in the JavaMail readme but still no luck on 1.5.
    Here is the error:
    DEBUG: setDebug: JavaMail version 1.4ea
    DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc.]
    DEBUG SMTP: useEhlo true, useAuth true
    DEBUG SMTP: trying to connect to host "mail.bluebottle.com", port 25, isSSL false
    220 fe0.bluebottle.com ESMTP Sendmail 8.13.1/8.13.1; Thu, 28 Jun 2007 08:25:34 -0700
    DEBUG SMTP: connected to host "mail.bluebottle.com", port: 25
    EHLO CC-FRED
    250-fe0.bluebottle.com Hello 207-174-73-129.officepartners.us [207.174.73.129] (may be forged), pleased to meet you
    250-ENHANCEDSTATUSCODES
    250-PIPELINING
    250-8BITMIME
    250-SIZE
    250-DSN
    250-AUTH LOGIN PLAIN
    250-STARTTLS
    250-DELIVERBY
    250 HELP
    DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg ""
    DEBUG SMTP: Found extension "PIPELINING", arg ""
    DEBUG SMTP: Found extension "8BITMIME", arg ""
    DEBUG SMTP: Found extension "SIZE", arg ""
    DEBUG SMTP: Found extension "DSN", arg ""
    DEBUG SMTP: Found extension "AUTH", arg "LOGIN PLAIN"
    DEBUG SMTP: Found extension "STARTTLS", arg ""
    DEBUG SMTP: Found extension "DELIVERBY", arg ""
    DEBUG SMTP: Found extension "HELP", arg ""
    STARTTLS
    220 2.0.0 Ready to start TLS
    javax.mail.MessagingException: Could not convert socket to TLS;
      nested exception is:
                    java.net.SocketException: com.cc.util.controller.email.DummySSLSocketFactory
                    at com.sun.mail.smtp.SMTPTransport.startTLS(SMTPTransport.java:1230)
                    at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:378)
                    at javax.mail.Service.connect(Service.java:275)
                    at javax.mail.Service.connect(Service.java:156)
                    at javax.mail.Service.connect(Service.java:176)
                    at com.cc.util.discovery.DiscoveryService.sendViaSMTP(DiscoveryService.java:422)
                    at com.cc.util.discovery.DiscoveryService.discoverSMTPService(DiscoveryService.java:378)
                    at com.cc.util.discovery.DiscoveryService.discoverPOP3Service(DiscoveryService.java:330)
                    at com.cc.util.discovery.DiscoveryService.checkEmailService(DiscoveryService.java:126)
                    at com.cc.applet.CCNonBlockingThread$1.run(CCNonBlockingThread.java:180)
                    at java.security.AccessController.doPrivileged(Native Method)
                    at com.cc.applet.CCNonBlockingThread.processEventData(CCNonBlockingThread.java:178)
                    at com.cc.applet.CCNonBlockingThread.run(CCNonBlockingThread.java:139)
    Caused by: java.net.SocketException: com.cc.util.controller.email.DummySSLSocketFactory
                    at javax.net.ssl.DefaultSSLSocketFactory.createSocket(Unknown Source)
                    at com.sun.mail.util.SocketFetcher.startTLS(SocketFetcher.java:249)
                    at com.sun.mail.smtp.SMTPTransport.startTLS(SMTPTransport.java:1226)
                    ... 12 moreHere is the code:
                   Properties props = new Properties();
                   props.put("mail.smtp.auth", "true");
                   props.put("mail.smtp.host", smtpServer);
                   props.put("mail.smtp.starttls.enable","true");
                   // the line below is for java 1.5
                   java.security.Security.setProperty("ssl.SocketFactory.provider","com.cc.util.controller.email.DummySSLSocketFactory");
                   // these are for java 1.4
                  props.setProperty("mail.smtps.socketFactory.class","com.cc.util.controller.email.DummySSLSocketFactory");
                  props.setProperty("mail.smtps.socketFactory.fallback", "false");
                   Session session = Session.getInstance(props, null);
                   session.setDebug(true);
                   // -- Create a new message --
                   Message msg = new MimeMessage(session);
                   // -- Set the FROM and TO fields --
                   msg.setFrom(new InternetAddress(from));
                   msg.setRecipients(Message.RecipientType.TO,InternetAddress.parse(to, false));
                   // -- Set the subject and body text --
                   msg.setSubject(subject);
                   msg.setText(body);
                   // -- Set some other header information --
                   msg.setHeader("X-Mailer", "FuserDiscoveryProcess");
                   msg.setSentDate(new Date());
                   // -- Send the message --
                   Transport tr = session.getTransport("smtp");
                   tr.connect(username, password);
                   tr.sendMessage(msg,msg.getAllRecipients());
                   tr.close();
                   CCLogger.getLogger().log(Level.INFO, "Message sent OK.");

    new info it works on 1.5.0_10 but not 1.5.0_06 any ideas?

  • MailAPI SMTP sending error: 'Could not convert socket to TLS'

    I'm stucked with smtp authentication in a project.
    The process works on port 25 with no STARTTLS, but unfortunately our company server uses port 587 and STARTTLS.
    It seems that only the half of the authentication process could be successful, as the server accepts EHLO, but when it switches to secure the program fails with the exception:
    'Could not convert socket to TLS'
    The simplified code (from a sample app) is:
    public void SendMail() throws Exception{
            Properties props = new Properties();
            props.setProperty("mail.transport.protocol", "smtp");
            props.setProperty("mail.smtp.host", "smtpserver");
            props.setProperty("mail.smtp.port", "587");
            props.setProperty("mail.smtp.auth", "true");
            props.setProperty("mail.smtp.auth.ntlm.domain", "codomain");
            props.setProperty("mail.smtp.starttls.required", "true");
            props.setProperty("mail.smtp.auth.mechanisms", "LOGIN NTLM");
            Session mailSession = Session.getDefaultInstance(props, null);
            mailSession.setDebug(true);
            Transport transport = mailSession.getTransport();
            MimeMessage message = new MimeMessage(mailSession);
            message.setSubject("My subject");
            message.setFrom(new InternetAddress("[email protected]"));
            message.setContent("<h1>Hello world</h1>", "text/html");
            message.addRecipient(Message.RecipientType.TO,
                                new InternetAddress("[email protected]"));
            transport.connect("smtpserver", 587, "CODOMAIN\\myaccount", "mypass");
            transport.sendMessage(message,
            message.getRecipients(Message.RecipientType.TO));
            transport.close();
       }

    I'll copy the full message below:
    +2010.06.29. 12:03:10 mailapi_2.Main main+
    SEVERE: null
    javax.mail.MessagingException: Could not convert socket to TLS;+
    nested exception is:
    javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
    at com.sun.mail.smtp.SMTPTransport.startTLS(SMTPTransport.java:1652)
    at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:534)
    at javax.mail.Service.connect(Service.java:291)
    at mailapi_2.SimpleMail.SendMail1(SimpleMail.java:59)
    at mailapi_2.Main.main(Main.java:23)
    Caused by: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
    at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:174)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1591)
    at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:187)
    at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:181)
    at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:1035)
    at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(ClientHandshaker.java:124)
    at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Handshaker.java:516)
    at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Handshaker.java:454)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:884)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1096)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1123)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1107)
    at com.sun.mail.util.SocketFetcher.configureSSLSocket(SocketFetcher.java:503)
    at com.sun.mail.util.SocketFetcher.startTLS(SocketFetcher.java:443)
    at com.sun.mail.smtp.SMTPTransport.startTLS(SMTPTransport.java:1647)
    +... 4 more+
    Caused by: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
    at sun.security.validator.PKIXValidator.doBuild(PKIXValidator.java:285)
    at sun.security.validator.PKIXValidator.engineValidate(PKIXValidator.java:191)
    at sun.security.validator.Validator.validate(Validator.java:218)
    at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.validate(X509TrustManagerImpl.java:126)
    at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:209)
    Could not convert socket to TLS
    at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:249)
    at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:1014)
    +... 14 more+
    Caused by: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
    at sun.security.provider.certpath.SunCertPathBuilder.engineBuild(SunCertPathBuilder.java:174)
    at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:238)
    at sun.security.validator.PKIXValidator.doBuild(PKIXValidator.java:280)
    +... 20 more+
    And the output panel before the exception:
    Sending mail...
    DEBUG: setDebug: JavaMail version 1.4.3
    +DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]+
    DEBUG SMTP: useEhlo true, useAuth true
    DEBUG SMTP: trying to connect to host "smtpserver", port 587, isSSL false
    +220 exch.plt.local Microsoft ESMTP MAIL Service ready at Tue, 29 Jun 2010 12:03:08 +0200+
    DEBUG SMTP: connected to host "smtpserver", port: 587
    EHLO machine.codomain.local
    +250-smtpserver.codomain.local Hello [xxx.xxx.xxx.xxx]+
    +250-SIZE 15728640+
    +250-PIPELINING+
    +250-DSN+
    +250-ENHANCEDSTATUSCODES+
    +250-STARTTLS+
    +250-AUTH GSSAPI NTLM+
    +250-8BITMIME+
    +250-BINARYMIME+
    +250 CHUNKING+
    DEBUG SMTP: Found extension "SIZE", arg "15728640"
    DEBUG SMTP: Found extension "PIPELINING", arg ""
    DEBUG SMTP: Found extension "DSN", arg ""
    DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg ""
    DEBUG SMTP: Found extension "STARTTLS", arg ""
    DEBUG SMTP: Found extension "AUTH", arg "GSSAPI NTLM"
    DEBUG SMTP: Found extension "8BITMIME", arg ""
    DEBUG SMTP: Found extension "BINARYMIME", arg ""
    DEBUG SMTP: Found extension "CHUNKING", arg ""
    STARTTLS
    +220 2.0.0 SMTP server ready+

  • Quicktime does not convert my .MOV file into a watchable format on Quicktime

    Hi guys!
    I won't give you all a long sob story but basically, I went to my first music festival over the weekend and uploaded my videos onto my friends computer, I then uploaded these videos (i took with my iPhone) to Google Drive. When i got back onto my own computer, I download the .MOV files from Google Drive, these videos would not convert into a watchable format. It gives me the message -
    "QuickTime Player can't open "IMG_8788.MOV". To see if additional software is available that will enable QuickTime Player to open the movie, click Tell Me More."
    It says that Quicktime should support MOV files. I am using version 10.3 Quicktime player with iOS Mavericks. I really want help with this issue as I will be devastated if these videos are lost. My friend obviously deleted them off his computer because they did take up alot of space!

    I won't give you all a long sob story but basically, I went to my first music festival over the weekend and uploaded my videos onto my friends computer, I then uploaded these videos (i took with my iPhone) to Google Drive. When i got back onto my own computer, I download the .MOV files from Google Drive, these videos would not convert into a watchable format. It gives me the message -
    "QuickTime Player can't open "IMG_8788.MOV". To see if additional software is available that will enable QuickTime Player to open the movie, click Tell Me More."
    It says that Quicktime should support MOV files. I am using version 10.3 Quicktime player with iOS Mavericks. I really want help with this issue as I will be devastated if these videos are lost. My friend obviously deleted them off his computer because they did take up alot of space!
    iPhone recorded files should already be compatible QT X v10.3 (and QL) as is in the MOV file container. However, the process of downloading, uploading, and again downloading the files may have created some sort of issue causing QT X to not properly "recognize" the content and thus, wants you to check for additional support.
    In any case, will the files open in any other media players? (E.g., VLC, MPlayerX, NicePlayer, QT 7, MPEG Streamclip, etc.) For instance, if the files open in QT 7 Pro, MPEG Streamclip, or VLC, you may be able to copy the data to a new MOV file container which QT X will open and play. (I.e., this procedure does not recompress the data and is reasonable quick. Also not sure if using the "Command-D" Finder option to "duplicate" the file will create a "readable" file or not but you might try it.)

  • The bullet list, numbered list and the normal text is not converting when I am converting from RH 9 to MS Word 2010

    Hi all,
    Greetings for the day
    I am created a new CSS in Robohelp 9. I have also created a new template in Word 2010. The style sets for different information elements like (Heading, bullets, body text, ) are more or less same between the CSS and the new templates. I am also able to map the .css styles to Word template when I am converting from RH to Word as I am getting the necessary option in the drop-down list.
    However, when the output is generated, the bullet, the numbered list and the body text is not converting at all. The body text works sometimes. However, the numbered list and bullet list is coming out as images.
    If anybody knows the solution, I can share the .css and Word template.
    Thanks in advance.
    Regards,
    Parag Deb

    Create a new project with two or three topics containing lists of both types. Generate a printed output that shows the problem. Then zip it up and send it to me. See the Contact page on my site for instructions.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • AP Account Analysis Report USD not converting to Functional Currency

    When I am running AccountAnalysis Report , USD not converting to SGD\
    08-JUN-09 3D NETWORKS SINGAPORE PTE TI10050729 Invoice Nonrecoverable GST Yes
    USD 8,395.36 8,395.36 530000844
    Regards,
    Ajit
    Edited by: Ajit Raut on Jul 27, 2009 8:10 PM

    Resolved,
    ==============================================
    Please find below notes;
    Not all reports are appropriate to run under MRC responsibility.
    The reports that do not have set of books as parameter cannot show thedata in reporting currency as
    sob is not supplied. So all such reportsnot having set of books parameter cannot be expected to show
    the outputin reporting currency.
    Refr to the document "Multiple Reporting Currencies in Oracle Applications"
    Appendix A: MRC Reporting Responsibilities:
    Section Request Groups (page A-8)
    Extract from the document:
    The predefined MRC request groups allow you to access only those reports
    and programs that are "appropriate" to run when using a reporting responsibility.
    Pre–defined MRC request groups are in the format MRC Programs <product code>.
    Payables
    =======
    The following reports are available in the MRC Programs AP request group:
    • Accounts Payable Trial Balance Report
    • Posted Invoice Register
    • Posted Payment Register
    • Posting Hold Report
    • Transaction Reconciliation Report
    • Journal with GL Details Report

  • I want to create a document/spreadsheet (whichever) that I can send to agencies to type in information for work projects. Any ideas? I have an Excel file but it does not convert over very well and I am having trouble making changes to it.

    Need to create a new spreadsheet or be able to edit the one I have.
    I use this spreadsheet as a work order form for social service agencies. They enter name address etc., and then there are various work projects that they can select as well.
    The one I have from the organization I work with is an excel file but it does not convert over very well. Instead of being 7 pages it is more like 11 or so because things run off the page.  I am trying to delete certain things and move them over but not working out very well so thought it might be easier to start over fresh.
    Is numbers the program to use? If so, any useful tips?

    If the form is going to be used on an iPad, Numbers is the only game in town.
    Numbers is available for Macs only (and iOS devices). Excel is available for PCs and Macs. If you are in a mixed environment of Windows PCs and Macs and you are using this document as an electronic form, Excel is probably the better choice. Otherwise you will need to export to Excel for the PC users then import from Excel to retrieve their data. The import/export process is not perfect. A file that has been exported then reimported will not be the same as the original file. I would assume social services agencies are almost entirely PC-based. 
    If the form is to be printed or turned into a PDF for distribution and use by the social services agencies, either Excel or Numbers would do the job but right now Excel might be the better choice. I would have recommended Numbers '09 but I cannot recommend Numbers 3 for anything thsat requires printing until they give us the layout and printing functionality we used to have (editing in Print View, ability to set margins, etc).
    If everything else in your department/operation/agency is Windows PC and Microsoft Office based, you would be better off sticking with the standard.
    I hope that helps.

  • I am looking for an application that would allow me to open a word doc, and take notes in the .doc using a stylus pen.  I'd then like to convert those notes to text, and then be able to copy / paste those notes into an email.  Does this app exist?

    I am looking for an application that would allow me to open a word doc, and take notes in the .doc using a stylus pen.  I'd then like to convert those notes to text, and then be able to copy / paste those notes into an email.  Does this app exist?  It seems like we were doing these same types of things with Palm Pilots years ago, one would think this would work with iPads?

    I don't believe it will open a Word document, but Writepad allows for handwritten conversion of notes to text and then to email. Might help you some of the way...

  • In converting a pdf file to xlxs it did not convert the first 48 lines.

    When I converted a pdf file that I originally created in Excel, it did not convert the first 48 rows of info.

    Good day Hudda,
    I've seen this behavior a few times over the last few months.  You could try disabling the 'Recognize text' function, but it may not help.  We're anticipating an update to the ExportPDF service within the next few weeks that should help with issues like this, but I don't have an immediate solution for you.
    Please let me know if you have any questions.
    -David

  • Travel adapter, not converter to charge in a 220V country

    Will a travel adapter, not converter, be ok to charge my mba in a 220v country?
    I noted in the manual it said under 'Magsafe power spec's: Line Voltage 100 to 240 V.
    Thx!!

    Yes. Mac just needs an adapter, not a converter.
    Best.

Maybe you are looking for