To copy transfer rules

Hi guys,
how do we copy transfer rules, i need to build one more cube
with the same transfer rules with slight modifications..
Your help will be rightly appreciated
Thanks,

hi
There is no option for directly copying
You have to copy the routines manually and you have to create the other mappings again.
Assign points if useful
Regards
N Ganesh

Similar Messages

Copy Transfer Rules

Hello,
Can any body tell me how to copy transfer rules from one source system to an other for same datasource.
eg: Material Attr from R/3 DEV and R/3 QA systems into BW DEV system.
Any help is greatly appreciated.
Thanks,
Srini

Hello Srini,
as far as I know, this feature is not available. If I have to do the same, I use 2 sessions. The first one with the template (to copy from) and the second with the new transfer rules. But this works only, if the structure of the datasource in both systems is exactly the same. You can also use the meta data repository to copy from. Here you will also find the coding of the start routine as well as the coding for each infoobject.
regards
Siggi

Copy Transfer rules between 2 Infosources

HI experts,
I have two infosystems : E30 and T30.
how can I copy the transfers rules from E30 to T30?
thanks a lot!

Hi Marc,
Copying Transfer rules between infosources is not possible.
However you can transport the rules from one system to another.
Regards,
R.Ravi

Copy routines written in transfer rules to other system

<Moderator Message: Even as a newbie you should be able to copy and paste or read here and write there>
Hi All,
In the datasource '0CO_OM_OPA_6' , in the transfer rules for infoobject 0PART_CCTR' , we have a ruotine written 'Fill Partner Cost Center from Partner Objects'.
Now I want to write the same routine for same infoobject in another test server for the same data source.
Can anybody please tell me how to go about from start as I am new in BW.
Regards,
Sushmita
Edited by: Siegfried Szameitat on Jun 8, 2009 3:47 PM

I think you should check the source system assignment in the transport connection. It might have directed to the old sytem.
Cheers
Chanda

Transfer Rule copy in BW When client is changed ...Urgent please help

Dear Guru's
We have BI 7.0 System Connected with R/3 as S.system Which has two clients(Client 90 and client 10) , Earlier the Source System connection was with Client 90 and Exists feel Transfer rules and Ipackages, Now the Connection is changed to Client 10, So is there any possibility or a process that i can copy all these Transfer Rules and I package from (client 90)to (Client10), But not creating it manually again.
Can any one please suggest me some idea.
Thanks in advance
Dev
Edited by: Srinivas dev on May 29, 2008 11:44 AM

HI
One small Qn.
The note is for changing the client or copying it from one S.system to another sys (Eg:- dev to production)
But in my case i have to change the client within Bw system , So that i can get all the transfer rule from one client to another
Thanks and Regards
Dev
Edited by: Srinivas dev on May 29, 2008 3:05 PM
Edited by: Srinivas dev on May 29, 2008 3:22 PM

Error in collecting transfer Rules in transport request after system copy

Hello,
Recently we had a system copy from Production to Test system.
We are trying to collect all the transfer rules from production in the transport request with the procedure which is given in the below link.
Re: Q: Transfer Rules after system copy
When we are trying to transport such objects, system first prompt for transportable workbench request, after specifying request once, it prompts for it again and after providing transport request number system results with message u201CSpecify a requestu201D.
Please suggest how to overcome this issue.

thats scary that you are copying your transfer rules from production to test system well if you guy sare doing it good luck..
a part from that make sure your prd is open so it allows items to be able to transport an dthere is a conenction between prd to test for transports to go through
if you have already copied all te data source to TEST, replicate them IN BWQ( your test system) then send over tranfer fules .
hope that helps.

Is there away to activate all Transfer Rules after a client copy at once?

Our Basis team recently created 2 new clients from copying our existing dev & qa systems they then changed the partner profiles and source systems to point to our new ecc clients but we now cant get anything to run without activating transfer rules trying to do this one at a time twice is going to take a long time is there anyway of doing this en masse?

Hi
you may have to use following FM too
RS_COMSTRU_ACTIVATE_ALL      Activate all inactive Communication Structures
RSAU_UPDR_REACTIVATE_ALL      Activate Update Rules
and then
RS_TRANSTRU_ACTIVATE_ALL      Activate Transfer Structure
Regards
Sudeep

System copy problem...No transfer rules available

Hi ,
We are facing a problem in getting the Transfer Rules...
1.we did a system copy from PRD system and created a Sandbox system .
2.After the system copy the problem came from the source system.....i.e for the datasource's in the table RSOLTPSOURCE the mapping is showing for 2 systems....CRM PRD system & CRM SANDBOX system....
3.Coz of this issue the Transfer rules are not available and the all the DS are inactive......
4.I tried with the FM RS_TRANSTRUC_ACTIVATE_ALL but im getting message as no transfer structure is available.
5.When i tried to manually activate the DS from BW side it is asking to create TRANSFER RULE.
Please help me to sort it out.....
Thanks in Advance
BASKAR

HI ,
I also raised a OSS to SAP ....what they suggested is....
According the logs in BWS there was definitely a systemcopy from BWP to BWS, but the BDLS logs looks very strange, which actually did not converted anything, because the administration tables containing some very strange entries.
Lets take the datasource 0crm_sales_act_1 for example. If you check this datasource in table RSOLTPSOURCE you can see, that it exists currently for both source systems:
OLTPSOURCE LOGSYS OBJVERS
0CRM_SALES_ACT_1 CMPCLNT501 A
0CRM_SALES_ACT_1 CMSCLNT501 A
Unfortunately the root cause of this is unkown, but most probably it is caused by an improper copy procedure, where the consulting note
886102 was not followed.
To solve the problem, please follow the below steps:
1. Implement note 1405233 and 1336119 to your system 2. Go to RSA1 and delete the source System CMS.
3. With function module rsar_logical_system_delete delete the source system CMP:
I_LOGSYS CMPCLNT501
I_FORCE_DELETE X
I_NO_TRANSPORT X
I_NO_AUTHORITY X
4. In your productive BW (BWP) please create a transport request which contains all the source system dependent objects for CMP. Please check note 886102 scenario B3 step 2 for details.
5. In BWS, please recreate the source system to CMS and activate it but please do not replicate the datasources yet.
6. In BWS please maintain the table RSLOGSYSMAP and map CMP to CMS and import the transport request created in step 4.
Please be aware, that such a constellation happens mostly, if some steps are missed or are not carried out properly from consulting note 886102. Please get in touch with your basis colleagues and provide them this note, so the next time such a problem does not occur.
I hope this helps to solve the problem.
Thanks
BASKAR

Copy transfer structure transfer rules from one client to other client

Hi
Our R3 client 100 is mapped to BW client 100.
R3 client 100 is source system in BW.
As the master data is created by users in R3 client 200 we want to get the data from client 200 to BW. We dont want to replicate each datasource and do all stuff form scratch for client 200.
Now the question is as we need to create transfer rules, transfer structure for all master data objects for client 200 in BW.
1. Going to create R3 200 client in BW.--this is possible.
2.Like create a transport connection in BW for client 200 for all master data infoobjects transfer rules transfer structure,process chain, infopackages..etc
3.Do the source system mapping for new client 200.
4.and then execute the process chain..
What are the best ways to achieve this.
creating all transfer structure and transfer rules only for those we are loading daily ..rather than all active ones.. How can I get the list of that master data that is loading daily.. and how easily can I create transfer structure..etc dependent objects in one go than manually.
Any help or thoughts are appreciated..
can anyone throw some light please....

Hi,
BW is not client dependent!!! When you sign on to BW, you have the client required. However, this field does not appear in any table (master data, ODS, cubes, whatever).
This means that a same BW server with a single client can have multiple R/3 connections (for multiple R/3 clients).
The database do not care about the client in BW. The data will be consolidated.
So, you do not need any new client in BW, just two R/3 connections for your two clients.
Regards,

Transfer Structure / Transfer Rules comparison or copy

Hello,
We have our BW dev system linked to both dev and QA R/3. Consequently, the transfer rules are created manually for the QA.
Do you know if there are any tools to compare the transfer structure/rules for given data source and source systems?
Regards,
Michal

Hi Michal,
What I understood is, you have only one Bw system & both R/3 Dev and R/3 Quality boxes are connected to it and you have to take data from both boxes to BW system.
I do not understand the cause of this kind of system landscape but you can assign the another data source to same infosource then you will see data comming from two system one will be for R3 Dev and other for R3 Quality.
Hope this will help you
Suneel

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

BI transfer rules missing .

Dear all,
we had made a system copy of the source system (ECC) and with BI (Scm) system i.e both the systems on Quality was refreshed with prod , now we get the error that transfer rules does not exist on the copied BI system .
Could any one help
Regards
kumar

Hi,
See the following SAP Notes:
SAP Note 886102 - System Landscape Copy for SAP NetWeaver BW
SAP Note 325470 - Activities after client copy in BW source systems
SAP Note 325525 - Copying and renaming systems in a BW environment
SAP Note 1333302 - Special procedure for BW system copy
SAP Note 996238 - Dump 'RFC connection error' after BW system copy
SAP Note 184754 - Procedure after BW database copy
SAP Note 184322 - Procedure after DB copy of BW source systems
SAP Note 538052 - Maintenance of Myself destination in BW
Search for PDF in SDN
How Tou2026System Copy in SAP Business Intelligence System Landscapes
Need to activate the objects and then transport.
Thanks
Reddy

Two issues: activation of transfer rules and data load performance

hi,
I have two problems I face very often and would like to get some more info on that topics:
1. Transfer rules activation. I just finished transport my cubes, ETL etc. on productive system and start filling cubes with data. Very often during data load it occurs that transfer rules need to be activated even if I transport them active and (I think) did not do anything after transportation. Then I again create transfer rules transports on dev, transport changes on prod and have to execute data load again.
It is very annoying. What do you suggest to do with this problem? Activate all transfer rules again before executing process chain?
2. Differences between dev and prod systems in data load time.
On dev system (copy of production made about 8 months ago) I have checked how long it takes me to extract data from source system and it was about 0,5h for 50000 records but when I executed load on production it was 2h for 200000 records, so it was twice slower than dev!
I thought it will be at least so fast as dev system. What can influence on data load performance and how I can predict it?
Regards,
Andrzej

Aksik
1 How freequently this activation problem occurs. If it is one time replicate the datasource and activate thetransfer structure( But in general as you know activation of transfer structure should be done automatically after transport of the object)
2 One thing for difference of time is environmental as you know in production system so many jobs will run at the same time so obiously system performance will be slow compare to Dev System. In your case both the systems are performing equally. You said in dev system for 50000 records half an hour and in production 200000 records 2hrs so records are more in Production system and it took longer time. If it is really causing problem then you have to do some performance activities.
Hope this helps
Thnaks
Sat

Error in transfer rules

Hello,
When I try to activate transfer rules, I get the following error.
'Error with Content merge: InfoObject XXXX already in use'
It says that this infoobject has been used in other transfer rules of the same datasource.
Could someone help me out with this pls?
Regards,
Suraj

Hi Srilatha,
Could you pls tell me what activating in copy mode means?
Hi Anil,
When i say i am using the same IO in two transfer rules, i mean they are for two different datasources and infosources not the same one.
Those trasnfer rules are similar to the ones i want to create.
For eg: In one DS, i might map id and desc of say, an co order to the its infosource, in other ds, i might map id and desc to some other order. The IOBJs are the same, but the DS and the IS are different, so i am not trying to assign the same IO twice in the same transfer rule
Regards,
Suraj
Regards,
Suraj

InfoObject available in Transfer Rule but not PSA

Hi experts,
We require 0COMPANY to be included in our DSO. However, standard DSO and DataSource do not have this InfoObject. What is available is only 0COMP_CODE.
As such, we include 0COMPANY in the DSO which are then made available in the transfer rule. In this transfer rule, we assign 0COMPANY to copy the value from 0COMP_CODE and activate it.
After extraction, we do a check in our PSA. However, we are unable to find 0COMPANY in the PSA. What available is only 0COMP_CODE.
Can I know what is the reason 0COMPANY does not exists in PSA? We have included it in Transfer Rule previously and acticvate it accordingly. As such, records in PSA should show both 0COMP_CODE and 0COMPANY, am I right?
Many thanks.
//Points will be rewarded.

After extraction, we do a check in our PSA. However, we are unable to find 0COMPANY in the PSA. What available is only 0COMP_CODE.
Yes you will be only be able to see fields available in the datasource in PSA like 0COMP_CODE here.
Can I know what is the reason 0COMPANY does not exists in PSA? We have included it in Transfer Rule previously and acticvate it accordingly. As such, records in PSA should show both 0COMP_CODE and 0COMPANY, am I right?
PSA will only show fields available in the datasource.
Check the Cube or DSO - this will show 0COMPANY.
Bear in mind if you use 0COMPANY instead of 0COMP_CODE - Master Data of 0COMPANY will be displayed in the report.
I donot know how different they are.

To copy transfer rules

Similar Messages

Maybe you are looking for