TO CREATE A CREDIT MEMO USING CREDIT MEMO REQUEST

Hi,
I have a credit memo request 60000150 and I need to create a credit memo using the above credit memo request.Can anyone suggest a BAPI or some other method to do this and also the parameters to be passed

Similar Messages

Creating a debit memo request with reference to an invoice

Hi,
An invoice shows wrong MWST value because of incorrect customer tax classification as Tax exempt. I corrected the cust tax classification to "Liable for Tax". Then I tried to create a debit memo request with reference to the incorrect invoice. Thats a requirement by the customer. Invoices with incorrect VAT are not to be cancelled. A specially created VAT only sales order (Debit memo request) is used to create a sales order with 0 net value and correct MWST . But while trying to create the debit memo request, the system picks up the same old condition record for the MWST. How to overcome this situation ?
The copy control for the item category from billing doc to debit memo request is set to "B" that is new pricing. I even tried to update pricing. But it does not work. Changing the Service rendered date or the pricing date to current date also does not help.
Please help.
Regards.

This is working fine. What I did was
1: create a new pricing procedure
2: made the PR00 condition statistical
3: using a routine calculate the MWST based on the PR00. But PR00 itself does not contribute to the net value. This part is working fine. I could create debit memos successfully.
The problem is if we change either the customer or the material tax classification after creating the invoice, and then create a debit request with reference to the incorrect invoice, the system still considers the old tax classfication and therefore the old MWST rate. If I create a debit request without reference, the new rate is applicable.
I hope I have made clear.
Regards.

How to create a Debit Memo Request in backend with same behavior to DP91

There is a special requirement for creating a DMR in backend. Is there any BAPI or function can create a DMR? Please kindly help me. Thanks a lot!

Hi
Refer the link below
<a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAGTFADMSD/CAGTFADMSD.pdf.">BUS2096</a>

Enter sold-to party debit memo request - credit memo request

Hi Gurus,
I have a scenario here while creating a Debit memo request.
1. I create a Debit memo request with sold-to party 1000
2. I create a Credit memo request with the same sold-to party 1000.
That will be saved,
but when you enter VA02 or VA03 for CMR, a message displays "Enter a Sold-to Party".
So in VA02, I will refill it with Sold-to party 1000, then I can save it. But when I view it again, I will encounter the same message again.
However, if I use a different sold-to party 2000, the CMR will be saved normally, and if you view it via VA02, you will see it is correct (you can see sold-to party 2000).
Why? Cant I use the same sold-to party for DMR to CMR?
Please help....
Ram

Check whether the partner functions are mantained properly for customer 1000. Go to VD01 and maintain.
Regards,
GSL.

Credit/debit memo request

hi,
1) credit memo request - After create invoice in vf01, then if credit memo needed, must create credit memo request in va01 then only can create credit memo in fb75?
2) debit memo request - After create invoice in vf01, then if debit memo
needed, must create debit memo request in va01 then only can create debit memo in fb70?
3) credit/debit memo can only be created after credit/debit memo request is created?
4) if credit/debit memo not created in fb75/fb70, where in sd can create?
5) credit/debit memo request done via which tcode if not va01.
thanks

Hi Eliana,
1. A transaction that reduces Amounts Receivable from a customer is a credit memo. For eg. The customer could return damaged goods. A debit memo is a transaction that reduces Amounts Payable to a vendor because, you send damaged goods back to your vendor.
2. Credit memo request is a sales document used in complaints processing to request a credit memo for a customer. If the price calculated for the customer is too high, for example, because the wrong scale prices were used or a discount was forgotten, you can create a credit memo request. The credit memo request is blocked for further processing so that it can be checked. If the request is approved, you can remove the block. The system uses the credit memo request to create a credit memo.
You can use credit memos in Sales and Distribution (SD) for assigning credit memo requests to the open invoices and in Financial Accounting (FI) for assigning credit memos and payments to the open invoices and carry out clearing with them. If you use both Financial Accounting (FI) and Sales and Distribution (SD), there is a 1:1 relationship between the credit memo request and the credit memo item posted in Financial Accounting (FI). As soon as you bill the credit memo request together with other sales orders, or distribute the items of one credit memo request to several billing documents, the assignment is no longer valid and the system will not process it.
For credit memos, credit memo requests, and payments, you have the following assignment options:
- Assignment to a single invoice
- Assignment of a partial amount to an invoice
- Assignment to several invoices
When you post credit memos, the payment programme processes them automatically. If the credit memo is specifically related to a particular open invoice item, the payment program automatically attempts to offset the credit memo against the open item. If it is not possible to completely offset the credit memo against an invoice, you can post a debit memo to the vendor, who is to reimburse the amount. Then you can apply a multilevel dunning program.
3. Debit memo request is a sales document used in complaints processing to request a debit memo for a customer. If the prices calculated for the customer were too low, for example, calculated with the wrong scaled prices, you can create a debit memo request. The debit memo request can be blocked so that it can be checked. When it has been approved, you can remove the block. It is like a standard order. The system uses the debit memo request to create a debit memo.
4. As mentioned above, creating a credit or debit memo request enables you to create credit or debit memos based on a complaint. For this first create a sales document with the order type for a credit or debit memo request. You can create the debit or credit memo requests in the following ways:
Without reference to an order
With reference to an existing order
Here you enter which order the complaint refers to.
With reference to an invoice
Here you enter which invoice the complaint refers to.
In all cases, you specify the value or quantity that should be in the credit or debit memo
5. You can block the credit or debit memo request from being billed in Customizing. Go to Sales -> Sales Documents -> Sales document header -> Define sales document type and select the billing block field in the billing section. This request can later be reviewed along with similar ones, - if necessary, by another department. The request for a credit or debit memo can then be approved or rejected.
Credit memo and debit memo is created used the T.Code VF01, in which we have to choose the billing type as Credit Memo or Debit Memo.
Credit Memo Request or Debit Memo request are created using T.Code VA01, in which we have to select document type as G2 or L2.
Hope this gives you some idea.
REWARD IF HELPFUL.
Regards,
Praveen

Debit memo request with reference to the credit memo request

Dear SD Consultants,
I have a business scenario in which I create a credit memo request with reference to a debit memo request but the problem is that ,i can create many debit memo requests with reference to the same credit memo request even if the all target quantity was referenced , I still can create many debit memo requests with reference to the credit memo request so can any one tell me how to restrict creating debit memo request with reference to the credit memo request up till the all target quantity was referenced.
Regards,
SD Consultant

Dear Saju.S,
I have checked all the positive/negative values in the item copy control but none of the values works as i still can create many debit memo requests with reference to the credit memo request.
Regards,
Sd Consultant

Credit Note Request with reference to an invoice

Hi All,
We are creating a Credit Note Request referring an invoice. A Credit Note is then created referring to the Credit Note Request. However both the invoice and credit note shows as open items FBL5N.
Please help how do we get the invoice amount to be cleared once the credit note is created referring to the same? Please find below the document flow:
Sales Order => Invoice => Credit Note Request => Credit Note.
Regards,
Rajesh Singh

Hello,
there is not any functionality to make billing document and credit memo automatically cleared in accounting.
Only in case of cancellation (by VF11) it is possible that cancelled invoice and cancellation invoice are automatically cleared in accounting.
Sorry for the negative answer.
Best regards,
Ivano.

Debit Memo Request with Reference to Service Order

Hi Team,
I need to create the following business process
Service Notification -> Service Order -> Debit Memo Request -> Debit Memo.
I'm able to create the notification and the service order. However while creating the debit memo request with reference to the service order I'm stuck. Not sure where and how do I give the reference document number for the data to flow from the Service Order to Debit Memo Request.
Regards
Nadarajah Pratheb

Hi Nadarajah,
The following may help you.
1.Check the sales document category of the service order you are using.
2. Check which kind of document given in the with reference screen has the same sales document category.
3. For that document type, enter the service order as the reference.
4. Now you can see the details getting copied to the debit memo request.
5. Make sure copy controls are properly maintained from service order to debit memo request.
Please assign reward points if it helps.

How to avoid more than one debit memo request referenced to an invoice

Hello Experts,
Please if you have answer to the following question let me know it, the case is the following:
I can create a debit memo request with reference to an invoice more than once time, which means I can have many debit memos request with whole reference to the same invoice number. How can I avoid it or notify to the user while creating a debit memo request that an invoice number has already a created debit memo request.
I already check the requirement and transfer routines in copy control but I cannot use table VBFA to verify if there is a previous debit memo request, and also I verify the configuration of the debit memo request.
Thanks a lot for your help.
Best Regards

Hello,
You're saying that you cannot check VBFA for previous Debit Memo Requests - is this because the previous Debit Memo Requests do not appear in the invoice's document flow? If so, please check Copying Control: Billing Document to Sales Document (item) - is the Update document flow box checked?
Regards,
Joã

Internal order number in debit memo request in external billing

Hi Experts,
I am trying to create a Debit Memo Request in ECC from a confirmation in CRM. This confirmation is created as a follow-up to the service order.
The debit memo request is getting created but it does not have a reference of the internal order and hence on billing, the revenue is not getting posted to the internal order.
Could you suggest if there is some setting required in CRM to link the internal order to the Debit Memo Request?
Thanks in advance

Hi,
I have the same issue, can you let me know how you resolved?
Thanks,
Kevin

Internal order number not present in debit memo request in External billing

Hi Experts,
We are working on external billing in CRM and have single object controlling configured. I am trying to create a Debit Memo Request in ECC from a confirmation in CRM. This confirmation is created as a follow-up to the service order. The debit memo request is getting created once the confirmation is completed but it does not have a reference of the internal order and hence on billing, the revenue is not getting posted to the internal order. Could you suggest if there is some setting required in CRM to link the internal order to the Debit Memo Request?
Thanks in advance

Hi,
I have the same issue, can you let me know how you resolved?
Thanks,
Kevin

Copy Control from Billing doc to Debit memo request

hi,
we are trying to sort the follwing problem out. We create a debit memo request with reference to the invoice, we then change the sold to party, however the pricing is carried out again. we want to retain the invoice values but only change the sold to party and quantities. i have change the copy control to "copy pricing elements unchanged" however it still reprices the debit memo.

Hi,
As per your question, You have invoiced customer X wants to issue debit memo request to customer Y.
How come is it possible?Could you elaborate the scenario?
SAP system retrieve master data from sold -to-party record for Sales order and also access ship-to-party record for delivery and access Payer's record for Billing.
You change sold to party in Debit memo request.SAP system access record of new sold-to-party for debit memo req.(It is sales order type).
In T-code VTAF - You changed Pricing type to D-copy pricing elements unchanged.It is not sufficient to fulfill your requirement.In this transaction other Data transfer routine also affects copying.These are Data transfer routine 104(business data item billing) and 004(Billing item partner).
Data transfer routine allow you to fine tune the transferred fields during the copying process.It specifies the item business data to be transferred from a billing document item to a sales document item.Special checks are also performed to be sure that SOLD -TO-PARTY IS THE SAME PRIOR TO initiating data transfer of the item related business data.Iten related business data are incoterms,taxes discount applicable to Sold-to-party.
In your case sold-to- party is changed.It also changes business data and pricing.
Hope it would help you.
Thanks,
Vrajesh

Problem while creating credit memo request using BAPI

HI,
I am trying to create credit memo request using the BAPI_SALESDOCU_CREATEFROMDATA1..
I am getting the error as " No customer master data is available for the customer". But the customer exists in the KNA1 table. What is the mistake i hv done.. this s my code..
REPORT ZSV_CREDITMEMO_TEST1.
Data declarations.
DATA: v_vbeln LIKE vbak-vbeln.
DATA: header LIKE bapisdhead1.
DATA: headerx LIKE bapisdhead1x.
DATA: item LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx TYPE STANDARD TABLE OF bapischdlx
 WITH HEADER LINE.
DATA: lt_schedules_in TYPE STANDARD TABLE OF bapischdl
 WITH HEADER LINE.
DATA: lt_schedules_ink TYPE STANDARD TABLE OF bapisdhead1
 WITH HEADER LINE.
START-OF-SELECTION.
Header data
Sales document type
header-doc_type = 'G2'.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = '0001'.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = ''.
headerx-distr_chan = 'X'.
Division
header-division = ''.
headerx-division = 'X'.
headerx-updateflag = 'I'.
*Complete delivery
 header-COMPL_DLV = ''.
 header-COMPL_DLV = 'X'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = '0000C10130'.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = ''.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = 'C20011'.
itemx-material = 'X'.
Plant
item-plant = ''.
itemx-plant = 'X'.
Quantity
item-target_qty = '10000'.
itemx-target_qty = 'X'.
item category
itemx-ITEM_CATEG = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = '10000'.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Call the BAPI to create the sales order.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
 EXPORTING
 sales_header_in = header
 sales_header_inx = headerx
 IMPORTING
 salesdocument_ex = v_vbeln
 TABLES
 return = return
 sales_items_in = item
 sales_items_inx = itemx
 sales_schedules_in = lt_schedules_in
 sales_schedules_inx = lt_schedules_inx
 sales_partners = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
 EXIT.
ENDLOOP.
IF sy-subrc = 0.
 WRITE: / 'Error in creating document'.
ELSE.
Commit the work.
 COMMIT WORK AND WAIT.
 WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF.
can anyone tell what the error is.?

Hi
please look at code below code this succefully creating credit memo may some help to you
header-doc_type = 'ZS4'.
 PERFORM get_plant.
 headerx-doc_type = 'X'.
 header-sales_org = wa_temp1-vkorg.
 headerx-sales_org = 'X'.
 header-purch_no = wa_temp1-bstnk.
 header-distr_chan = wa_temp1-vtweg.
 headerx-distr_chan = 'X'.
 header-division = wa_temp1-spart.
 header-purch_no_s = wa_temp1-bstnk.
 headerx-division = 'X'.
 wa_partner-partn_role = 'AG'.
 wa_partner-partn_numb = wa_temp1-kunnr.
 APPEND wa_partner TO it_partner.
 wa_partner-partn_role = 'WE'.
 wa_partner-partn_numb = wa_temp1-kunnr.
 APPEND wa_partner TO it_partner.
 CLEAR: wa_partner.
 LOOP AT lt_temp2 INTO wa_temp2 WHERE kunnr = wa_temp1-kunnr.
 "AND matnr = wa_temp1-matnr.
*wa_item-itm_number = wa_temp2-posnr .
 wa_item-material = wa_temp2-matnr.
 wa_item-plant = wa_temp2-werks.
 wa_item-req_qty = wa_temp2-fkimg * 1000.
 wa_item-target_qty = wa_temp2-fkimg * 1000.
 APPEND wa_item TO it_item.
 ENDLOOP.
 CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT1'
 EXPORTING
 order_header_in = header
* WITHOUT_COMMIT = ' '
* CONVERT_PARVW_AUART = ' '
 IMPORTING
 salesdocument = v_vbeln
* SOLD_TO_PARTY =
* SHIP_TO_PARTY =
* BILLING_PARTY =
 return = return
 TABLES
 order_items_in = it_item
 order_partners = it_partner.
 IF v_vbeln <> space.
 wa_vbeln-vbeln = v_vbeln.
 APPEND wa_vbeln TO lt_vbeln.
 CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
 EXPORTING
 wait = 'X'.
 HIDE wa_vbeln-vbeln.
 CLEAR: wa_partner,header,v_vbeln, wa_temp2.
 REFRESH: it_partner,it_item.
 ELSE.
* LOOP AT return .
 it_error-srno = idx.
 it_error-err_msg = return-message.
 APPEND it_error.
* ENDLOOP.
 ENDIF.
 idx = idx + 1.
ENDLOOP.
Regards

Create credit memo request using inbound IDOC

Hi Experts,
I want to create credit memo request using inbound IDOC, currently I am using GSVERF03 basic type and process code GSVE, I am getting below error:
No records exist in T661W for vendor XXXXX, plant, unloading point
Anyone suggest me is this correct message type to create credit memo request or suggest me the correct one. because we are working with customer sales order and invoice not with vendor purchase order.
Thanks for your help.

ah, apologies i read outbound! I think you are using the correct message type i.e. GSVERF.
Can you not simply create the missing entry in T661W? i.e. for the missing records?

Creating a credit memo by referring Billing document

Hi All,
 I am creating a Credit memo Say CM by reffering a Billing document say B.The Billing document has been created from a Contract say C.
 Now while creating the CM the contract dates need to be copied from C to the contract data screen of CM.
 I have used Copying control Billing Document to Sales Document for achieving this.
 I have edited the VEDA(Contract data) in the routines 302,303,402 etc. but its not reflecting in Contract data of CM screen.
 Please help me in resolving this.
Thanks and Regards,
Siva

Hi,
Create a new pricing procedure without the condition type you donot wish to appear in the credit note. create/ use a different document pricing procedure for the credit note, do the required assignments.. this will meet the requirements
Regards,
Ajit

TO CREATE A CREDIT MEMO USING CREDIT MEMO REQUEST

Similar Messages

Maybe you are looking for