To create a dvd and include hyperlinks within the presentations to further info

I want to create a DVD with a a main menu that feeds into various slideshows and pdf documents. But I want to include hyperlinks within these slideshows and pdf's that will bring you to further information (Sub Folders lets say!) that will not be contained within the initial slideshows and pdf documents but held somewhere on the dvd. How do I create these hyperlinks or can this be done?

Hi
I doubt that very much.
a Video-DVD as You make with iDVD is to be played on any standard DVD-Player and they can not address internet or playback .pdf.
• You can store Data-material on a Video-DVD but need a computer to use it
• You can convert a .pdf file into a movie to be viewed as any other movie (I never get good enough quality in this conversion though)
and
You can make the DVD into a Data-DVD on Desktop/Finder and convert Your movies into QuickTime .mov (or other) to be played on PC/Mac - but this will not play in any DVD-player.
Have You ever seen a DVD that work as You describe Your wish ? I never.
Yours Bengt W

Similar Messages

Adobe Premiere Basics Creating Video Publishing and Adding advertisments within the video.

Hi I am new to Adobe Premiere and have some basic questions I have a video that I would like to mix sound into and also add a flash advertisment in but am having problems previewing the movie in perfect quality. For example, when I drag my imported video in, the movie gets much smaller when I preview it. Even after I get some of the sequences finished and I export it, the video looks small.
I think this is something in the publishing or importing features that I don't know of, basically how do I work on my video and create parts to it while keeping the quality of the video 100%
My second question is, I have created a simple fade in fade out advertisment that I would like to go in the bottom right part of the video, how do i position it exactly there?
thanks pros!

1 - See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666?tstart=0
2 - Read about PIP = Picture in Picture
CS5 User Guides - online and PDF (see link in upper right corner at individual pages)
http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html

Can a user editable frame be created for "Notes" and emailed from within the app?

Hello,
I am super new to the digital publishing process. Our church has published devotional content for some time and this year we are taking those publications digital. One of the key aspescts to our design is for readers to be able to have space to write their own thoughts in the devotional.
I am not at all skilled in any sort of code or markup and I have tradtionally stuck to the visual side of production. So, I am wondering if there is a way to create a "Notes" frame within indesign that the user can email to themselves or save it in someother way from with in the app?
Below is a screen shot of the print edition so you can see the area I am refering to.

The CLASSPATH cannot be modified at runtime.
You can work around this by creating a URLClassLoader with the required CLASSPATH and using it to load your classes instead.

I have OSX 5.8 and I used imovie to create a DVD. Can I import the DVD back into imovie?

I have OSX 5.8 and I used imovie 09 to create a DVD. I have deleted the project. Can I import the DVD back into imovie in order to edit it?

How to Import DVD to iMovie Free to Create Your Own Videos
http://www.macxdvd.com/mac-dvd-video-converter-how-to/import-dvd-to-imovie-free. htm

How can I create multiple versions of a video within the same project?

OK...this is a probably a very basic question but I'm not sure how to word it clearly.
How can I create multiple versions of a video within the same project? What I mean is that I have a bout 50 minutes of video and I want to make two DVDs using different clips from this original 50 minutes of footage. It would be a real pain to have to re-import the video AGAIN for the second DVD. I suppose I could drop anything I don't want to burn to DVD back into the clips pane but that would wipe out all my transitions wouldn't it? I want to save each project in their “raw” form so I can burn additional DVDs later otherwise I would just do them one at a time and not care about one of them being destroyed.
Wow...that was a mess. Does anyone understand what the heck I’m asking? I hope so.

How can I create multiple versions of a video within the same project?
You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room.

Is it possible to create a DVD in iDVD without using the themes they provide?

Is it possible to create a DVD in iDVD without using the themes they provide?

Hi
No Menu DVD
from. Mishmunken
How to create a DVD in iDVD6 without menu (there are several options)
1. Easy. Drop your iMovie in the auto-play box in iDVD's Map View, then set your auto-play item (your movie) to loop continuously.
Disadvantage. The DVD plays until you hit stop on the remote
2. Still easy. If you don't want your (auto-play) movie to loop, you can create a black theme by replacing the background of a static theme with a black background and no content in the drop-zone (text needs to be black as well).
Disadvantage. The menu is still there and will play after the movie. You don't see it, but your disc keeps spinning in the player.
3. Still quite easy but takes more time. Export the iMovie to DV tape, and then re-import using One-Step DVD.
Disadvantage. One-Step DVD creation has been known to be not 100% reliable.
4. (My preferred method) Easy enough but needs 3rd party software. Toast lets you burn your iMovie to DVD without menu - just drag the iMovie project to the Toast Window and click burn.
Disadvantage. you'll need to spend some extra $$ for the software. In Toast, you just drop the iMovie project on the Window and click Burn.
5. The "hard way". Post-production with myDVDedit (free-ware)
Tools necessary. myDVDedit ( www.mydvdedit.com )
• create a disc image of your iDVD project, then double-click to mount it.
• Extract the VIDEO_TS and AUDIO_TS folders to a location of your choice. select the VIDEO_TS folder and hit Cmd + I to open the Inspector window
• Set permissions to "read & write" and include all enclosed items; Ignore the warning.
• Open the VIDEO_TS folder with myDVDedit. You'll find all items enclosed in your DVD in the left hand panel.
• Select the menu (usually named VTS Menu) and delete it
• Choose from the menu File > Test with DVD Player to see if your DVD behaves as planned. If it works save and close myDVDedit.
• Before burning the folders to Video DVD, set permissions back to "read only", then create a disc image burnable with Disc Utility from a VIDEO_TS folder using Laine D. Lee's DVD Imager.
//lonestar.utsa.edu/llee/applescript/dvdimager.html
hope this helps!
From LynnLU USA
www.mediasoftmac.com/dvd-creator-articles/convert-mov-video-to-dvd-on-mac.html#1 29
Yours Bengt W

Hi everybody, I am trying to create a DVD pal without menu with the program iDVD from a .mov file. Any ideas? Thanks so much.

Hi everybody, I am trying to create a DVD pal without menu with the program iDVD from a .mov file. Any ideas? Thanks so much.

(From fellow poster Mishmumken: )
How to create a DVD in iDVD without menu (there are several options):
1. Easy: Drop your iMovie in the autoplay box in iDVD's Map View, then set your autoplay item (your movie) to loop continously. Disadvantage: The DVD plays until you hit stop on the remote
2. Still easy: If you don't want your (autoplay) movie to loop, you can create a black theme by replacing the background of a static theme with a black background and no content in the dropzone (text needs to be black as well). Disadvantage: The menu is still there and will play after the movie. You don't see it, but your disc keeps spinning in the player.
3. Still quite easy but takes more time: Export the iMovie to DV tape, and then re-import using One-Step DVD.
Disadvantage: One-Step DVD creation has been known to be not 100% reliable.
4. (My preferred method) Easy enough but needs 3rd party software: Roxio Toast lets you burn your iMovie to DVD without menu - just drag the iMovie project to the Toast Window and click burn. Disadvantage: you'll need to spend some extra $$ for the software. In Toast, you just drop the iMovie project on the Window and click Burn.
5. The "hard way": Postproduction with myDVDedit (freeware)
Tools necessary: myDVDedit ( http://www.mydvdedit.com )
• create a disc image of your iDVD project, then double-click to mount it.
• Extract the VIDEO_TS and AUDIO_TS folders to a location of your choice. select the VIDEO_TS folder and hit Cmd + I to open the Inspector window
• Set permissions to "read & write" and include all enclosed items; Ignore the warning.
• Open the VIDEO_TS folder with myDVDedit. You'll find all items enclosed in your DVD in the left hand panel.
• Select the menu (usually named VTS Menu) and delete it
• Choose from the menu File > Test with DVD Player to see if your DVD behaves as planned.If it works save and close myDVDedit.
• Before burning the folders to Video DVD, set permissions back to "read only", then create a disc image burnable with Disc Utility from a VIDEO_TS folder using Laine D. Lee's DVD Imager:
http://lonestar.utsa.edu/llee/applescript/dvdimager.html
Our resident expert, Old Toad, also recommends this: there is a 3rd export/share option that give better results. That's to use the Share ➙ Media Browser menu option. Then in iDVD go to the Media Browser and drag the movie into iDVD where you want it.
Hope this helps!

Can not create a DVD (It gets green on the lower half of monitor)

Hi, everyone. This is second posting.
I still have a problem when burning the DVD.
Now I am ready to create a DVD.
Then I simulated the project on DVD Studio Pro 4 ,the lower half of the monitor gets green.
And sometimes I can not burn a DVD (can not choose "format") or even I could do it and mount it again , it shows "untitled DVD") Besides the burned DVD also gets green.
My project worked fine on final cut pro.
Did I install This application wrong?
or my Macpro has a problem with itself?
I need help. Please please give me any advise.
Thank you.

Yes, by citations I mean footnotes, or endnotes in this case.
I finally found the vertical ruler, which wasn't showing, but what really solved it for me was turning on invisibles, which let me see what the column breaks were doing. I still don't have the total control I want over the way it looks, but at least the two, two-column sections are separate and above and below the horizontal box. I wish all the citations were below the rule line.
But I was amazed and grateful to find that Word docs would drag and drop into Pages. This is going to be a great tool. I just started with it a few days ago. I will report the non-wrap bug.
Thanks,
Alan

Can I add or edit Keywords and captions from within the Map module?

I frequently find a need to edit or add to the caption while reviewing and geotagging photos in the Map module. Constantly toggling between modules is inconvenient. Is there a way to add/edit captions or keywords while working in the Map module (or view the map module while working in the Library?
Thanks!
Steve

thank you
From: Modesto Vega <[email protected]>
To: Steve Murray <[email protected]>
Sent: Thursday, January 29, 2015 3:27 PM
Subject: Can I add or edit Keywords and captions from within the Map module?
Can I add or edit Keywords and captions from within the Map module?
created by Modesto Vega in Photoshop Lightroom - View the full discussionYou should be able to change the title, the caption, the sublocation, the city, the state/province, the country, the ISO country code, the altitude, the direction, and a few other fields. However, you cannot add keywords. It would be real nice if Adobe could add this to the Map module. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7145077#7145077 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7145077#7145077 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Lightroom by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How do I prevent itunes from moving my music from its original place ie folders in an external drive when I play music from itunes. I have all my music in artist folders and separated by MPG3/MPG4 and FLAC folder within the artist folder.

How do I prevent itunes from moving my music from its original place ie folders in an external drive when I play music from itunes. I have all my music in artist folders and separated by MPG3/MPG4 and FLAC folders within the artist folder and itunes moves the track/s whenever i try and load selected music to my ipod/iphone. I've tried to find some sort of preference to prevent this, but no joy? What am I missing?

Try opening iTunes preferences. Then click on advanced tab. Then uncheck "Copy files to iTunes media folder when adding to library." By default, iTunes copies music to its own media folder when you use iTunes to play the music.

The buttons in main the vi get locked after opening a vi reference in a subpanel and using buttons within the subpanel.

I am trying to open a reference to a vi in the subpanel of the main vi. However after the vi opens in the subpanel and after pressing a few buttons in the subpanel the buttons in the main vi get locked, i.e. I can't even close the main vi or control anything else. Is there any way how I can avoid this happening?

> The buttons in main the vi get locked after opening a vi reference in
> a subpanel and using buttons within the subpanel.
>
> I am trying to open a reference to a vi in the subpanel of the main
> vi. However after the vi opens in the subpanel and after pressing a
> few buttons in the subpanel the buttons in the main vi get locked,
> i.e. I can't even close the main vi or control anything else. Is there
> any way how I can avoid this happening?
This is most likely happening because in either the top or sub panel,
there is an event structure that is queuing events, and is set to lock
the panel until the events are handled, and because of the logic in the
diagram, the events aren't being pulled from the queue.
So, you have a deadlock. You are waiting
on the panel. The panel is
waiting on the diagram. And the diagram is waiting on something else.
So, if there are indeed event structures involved, determine where in
the diagram things are delaying. Also, if you do not need the panel to
lock until the event is handled, you can change the setting in the
events dialog on the structure. But the events will still be queued
until the diagram starts executing.
Greg McKaskle

Cisco 877w -Configuration of subinterfaces and main interface within the same bridge group is not permitted

Hi,
I have another problem - after upgrade ios wirelles connection not work.
After reload i have :
Configuration of subinterfaces and main interface
within the same bridge group is not permitted
STP: Unable to get the port parameters.
Please configure the bridge group on this interface first.
Please configure the bridge group on this interface first.
Please configure the bridge group on this interface first.
SETUP: new interface NVI0 placed in "shutdown" state
my old configuration work propertly in the old software, but after update i have notificatio.
Old thread:
https://supportforums.cisco.com/discussion/12379491/cisco-877w-no-wireless-connection
my current sh run:
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
hostname cisco
boot-start-marker
boot system flash:c870-advipservicesk9-mz.124-24.T6.bin
boot-end-marker
logging message-counter syslog
logging buffered 4096 informational
enable secret 5 $1$eCNp$rWuBfZ/cexnwnkm7L447s.
aaa new-model
aaa session-id common
dot11 syslog
dot11 ssid ciscowifi
vlan 1
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 050D031D26595D0617
dot11 wpa handshake timeout 500
ip source-route
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.56.1
ip dhcp pool CLIENT
import all
network 192.168.56.0 255.255.255.0
default-router 192.168.56.1
dns-server 8.8.8.8 194.204.159.1 194.204.152.34
lease 0 2
ip cef
no ip domain lookup
no ipv6 cef
multilink bundle-name authenticated
username marek password 7 00121A0908500A
archive
log config
hidekeys
ip tcp path-mtu-discovery
bridge irb
interface ATM0
description Polaczenie ADSL do ISP$ES_WAN$
no ip address
no atm ilmi-keepalive
pvc 0/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
hold-queue 224 in
interface FastEthernet0
description Edzia
interface FastEthernet1
description dom
interface FastEthernet2
description Dziadek
interface FastEthernet3
interface Dot11Radio0
no ip address
no ip redirects
ip local-proxy-arp
ip nat inside
ip virtual-reassembly
no dot11 extension aironet
encryption vlan 1 mode ciphers tkip
encryption mode ciphers aes-ccm tkip
broadcast-key change 3600
ssid ciscowifi
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
world-mode dot11d country AU indoor
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.1
description ciscowifi
encapsulation dot1Q 1 native
no cdp enable
interface Vlan1
no ip address
bridge-group 1
interface Dialer0
description Interfejs dzwoniacy
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
ppp chap hostname [email protected]
ppp chap password 7 xxxxxxxxxxxxxxxxxxxxxx
interface BVI1
description Polaczenie dla sieci LAN
ip address 192.168.56.1 255.255.255.0
ip nat inside
ip virtual-reassembly
no ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
no ip http server
no ip http secure-server
ip nat inside source list 100 interface Dialer0 overload
ip nat inside source static tcp 192.168.56.10 80 interface Dialer0 80
ip nat inside source static tcp 192.168.56.10 22 interface Dialer0 22
logging trap debugging
logging 192.168.56.10
access-list 100 permit ip 192.168.56.0 0.0.0.255 any
access-list 100 deny ip any any
no cdp run
snmp-server community ciskacz RO
snmp-server chassis-id ciskacz
control-plane
bridge 1 protocol ieee
bridge 1 route ip
line con 0
no modem enable
line aux 0
line vty 0 4
exec-timeout 0 0
transport preferred ssh
transport input ssh
scheduler max-task-time 5000
end
please help - thanks!

Hello Marek,
I suppose you are not planning to do any kinds of advanced config using several VLANs and multiple SSIDs so let's just make your configuration simple and working.
In short, you need to remove all references to VLAN 1 and to any subinterfaces possibly related to the VLAN 1. This means in particular (follow these steps in sequence):
Remove the Dot11Radio0.1 subinterface entirely
In the Dot11Radio0 section, remove the encryption vlan 1 mode ciphers tkip command
In the dot11 ssid ciscowifi section, remove the vlan 1 command
After performing these steps, make sure that the ssid ciscowifi and encryption mode commands are still present in the Dot11Radio0 configuration, and if not, reenter them.
Best regards,
Peter

I created an album and have been showing it presentation style, ken burns effects etc. Now every time I try to re-run it it starts from the end, last picture first! Can't seem to be able to reverse it. Any clue anyone?

I created an album and have been showing it presentation style, ken burns effects etc. Now every time I try to re-run it it starts from the end, last picture first! Can't seem to be able to reverse it. Any clue anyone?

First try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion, Mt. Lion or Mavericks delete the contents the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto, reset iPhoto's preferences and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.
Next, if necessary, continue with the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Trying to burn my video to a dvd and I get media not present ?

I am trying to burn my video to a DVD and I get media not present ??

mcavalla
Just going to add on
a. Is this a :"it worked before but not now" issue or "it never worked before" issue?
b. If you did a burn to folder (4.7 GB) for your DVD-VIDEO, does that go to a successful completion?
Looking forward to your follow up.
Thanks.
ATR

ITunes dosent recognize my audio DVD and is stuck in the computer

iTunes dosent recognize my audio DVD and is stuck in the computer.

Is your computer Windows or Mac? Since you only posted the software for your iphone

To create a dvd and include hyperlinks within the presentations to further info

Similar Messages

Maybe you are looking for