To Create a multi provider

HI guys can  you please help me with the steps to create a multi provider using
PCA: Statistiscal Key Figures       0PCA_C02
PCA: Transaction Data                 0PCA_C01
There is no standard bussiness content multiprovider for this.
Thanks
K.Mohan

Dear Mohan,
For creating a Multiprovider first you have identify what key figures you want to see and what characteristics are common in the both the infocubes , and then create a MP , with the two cubes, select the characteristics and key figures , then maintain the dimensions , Maintain the Indentification ( in the sense the common characteristics , how they should be picked from the base infoproviders ) and the last step is to select the key figures , from which target they should be picked in the query. if you require from both , select from both and maintain the restriction in the query with the help of infoproviders..
Hope it Helps..
Thanks.
Krish

Similar Messages

  • I am trying to create a multi provider from 3 ods?

    hi all,
    I am creating an multi provider from 3 ods. how do i got about in creating dimensions using ods. Can anyone let me know how to create dimensions using ods.
    regds
    haritha

    Dear Haritha,
    You can create dimensions.But you will not be using these dimensions while running query. As you know multi provider doesn't hold any data.
    When you create multiprovder using info cubes.While running query based on multi provider in turn it will use info cube's dimension...
    As there will be not be any dimensions in ODS.
    So while creating Multi provider based on ODS only, you need to create "ZXXXX" dimensions.. just for the sake of creating the dimension ...because if you dont create dimensions in will not allow you to create MP.
    Regards,
    Viren.

  • I am trying to create a multi provider ? how to optimize my query performan

    hi,
    I am trying to creating a multi provider using four ods ? can anyone let me know how to optimize my query performance. Since my query takes a lot of time to get executed.
    If anyone has any docs for query optimization that is built based on multi provider pls do send it to my email id [email protected]
    regds
    haritha

    hi wond,
    Thanxs a lot for the quick response. Can you let me know how to create secondary indexes on ods and about partioning to be carried out.
    if u have any docs or url can you pls share. my email id [email protected]
    regds
    haritha

  • Is it possible to create a multi provider with different info providers?

    hi all,,
    Can anyone let me know is it possible to create multi-providers from different info providers.
    thanxs
    haritha

    Hi..
    An infoprovider is an SAP BW object you can use to create and excute queries .  Info providers include  objects that physically  contain  data ,  for expale ... data target  like info cube ,  ods onjects , and info objects  ( char , att, text or hier ..)
    They also include objects   that do not represent physical data storgae :
    Remote cubes ,  sap remote cubes . and multiproviders.
    info providers are objects or views relevant to reporting ..
    info providers can include
    info cubes ( basic cubes and virtual cubes )
    ods
    char obj ( with attt or text )
    info set
    multiproviders
    with regards,
    hari

  • Unable tp create multi provider for  ODS objects

    Hello Gurus,
    I want to create a multi provider or an Z ods object. When I do the same it does not show me the Z ODS objects. But it shows me the Standard SAP ODS for creating multi provider.
    thanks in advance
    rgds

    Hi,
    For the ODS that you are trying to use, check if the BEx reporting has been turned on in the ODS object settings. If it is not, then you cannot use it in a multiprovider.
    Hope this helps...

  • Creation of Multi Provider, using InfoCubes | Error in assigning dimensions

    Hi All.
    I am tryin to create a multi provider using five Info Cubes,  sat A, B, C, D, E. Now all of them have chars and KF's. some  of them are common.
    I selected the relevant info providers, then in the Identification part, I selected "Select All" for Chars/ Time chars as well as KF's.
    now when I am trying to Activate the Multi Provider, it says  " No Dimension Assigned to InfoObject x, y, z and so. on ".
    its clear that there is problem in assigning dimensions fr chars/kf's.
    So in the Edit Multiprovider screen, I click on Dimensions. Then it prompts me to select "One" InfoProvider.( The options being from A, B, C, D, E) and if i select any one, (say A),the chars/KF's present in A, are getting assigned the dimensions, but the chars/kf's from other Info Cubes arent geting the dimension assigned.
    what to do now? can any one help me out.please
    points will be assigned..:)

    Arun Kumar,
    Things to do to create a multiprovider:
    1. Select your infoproviders
    2. Select the characteristics you need
    3. Select the identification criteria
    4. Select Dimensions and assign characteristics
    Arun Varadarajan
    Message was edited by: Arun Varadarajan

  • Incorrect Non-cumulative values in a Multi-Provider

    Hi everyone,
    I have created one Multi-Provider using Info-cubes 0IC_C03 & ZSD_C03.
    The requirement was to get the "Invoice value" instead of the "Stock Issued Value" in 0IC_C03.
    I have used the characteristics 0CALMONTH, 0CALDAY, 0MATERIAL, 0PLANT & 0SOURCESYSTEM in the MP.
    However, when i execute a query based on the Multi-Provider, I notice that all Cumulative Key-Figures are showing correct Values, but the Non-Cumulative KFs (Val Stock Qty etc) are showing incorrect values (Large Quantities are displayed).
    I am not sure why its happening? Please Help
    Regards,
    Srikar

    Hi Ram,
    Previously i was using a variable on 0CALMONTH for restricting the data which resulted in Incorrect NC values.
    Later on, when I changed the Restriction based on 0CALDAY, the query was working fine.
    Moreover I also included all the Characteristics present in the Validity Table of the Cube 0IC_C03 in the MP which i didn't initially.
    I guess those two changes made the difference.
    Regards,
    Srikar

  • Multi provider not pulling data

    Hi All,
    I have 2 data targets ,1 is 0PA_C01 cube and 2nd is a custom DSO.i created a multi provider on top of them and made the identification process properly for chars and keyfigs.in my case 0HRPOSITION is the common char between the two data targets.when i see for the data in listcube transaction it is showing only data related to the cube it is not showing DSO related data.
    In the list cube transaction info provider column is showing only 0PA_C01.
    Please suggest me if i am missing something.
    Thanks
    Sri

    Thanks Mr M & Singh
    both of your suggestions are valid but no use in my case,0hrposition is having data in both data targets.if i copy 1 position value into another data targets it is showing values,it means there is a problem at multi provider level.
    **the multi provider not  at all pulling the second data target values ,i tested with some other data targets in all the cases values for only one data target are coming.
    i am in BI 7.0 SP20.
    can someone suggest more inputs?
    Thnaks
    Sri
    Edited by: super trooper on Feb 13, 2009 11:45 AM

  • Multi-provider can't add one time dimension

    I have created one multi-provider, saved. I can't activiate it, so I try to add one time dimension characterstic,. for example :
    Calendar Year/Month
    I right click the "Time" dimension, only I can change description. the " insert" menuitem is greyed out. so how to add one time characterstic?

    thanks.
    during activiation of multi-provider, another error below:
    Assignments for InfoObject 0VALUE_LC have not yet been maintained -> Long text
    Message no. R7645
    Diagnosis
    The MultiProvider definition contains an InfoObject that has not been assigned to the relevant InfoProviders.
    Procedure
    Choose Identification and highlight the assignment for InfoObject 0VALUE_LC, or remove the InfoObject from the MultiProvider.
    but I can't find "identification" , where is it?
    Edited by: Splinter on Nov 3, 2011 9:08 AM

  • Input Ready Query is not enabling on Multi Provider...

    Dear Folks,
    I have created one Multi Provider which is having 3 info cubes, out of three info cubes. 2 Planning Cubes & 1 Normal Cube.
    I have  created one Aggregation Level on top of Multi Provider and created input ready query which is not enabling as a input for key figures.
    Do you have any idea on this.
    Thanks,
    Venkat

    Hi,
      Please refer to the following link for more details on the same,
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/1d023a41130bd5e10000000a422035/content.htm
    Check the following points to make your query as input enables,
    1. Drill down or filter all the characteristics present in the query.
    2. Check whether the "Open query in Change mode" is checked in Query properties.
    3. Check whether your real time infocube is in "Plan mode"
    4. Make sure that your planning cube is not locked by any other person when you are trying to open your query.
    Regards,
    Balajee
    Edited by: Balajee Sivakumar on Jan 31, 2011 5:00 PM

  • Multi provider is not getting exact data.

    Hi Experts,
    I am working on BW, I have created a Multi provider with three cubes and one ODS, I have added total 16 objects in this Multi provider, while I am executing this Multi provider in LISTCUBE it is showing only four fields data, all fields are having data but in listcube 12 fields are showing empty.
    How can i get the remaining fields data also,
    Please help me to get the data,
    Helpful answer will be appreciated with full points.
    Thanks in advance,
    Venkat.

    Hi,
    Check that there is data in the cube that is available for reporting.
    Try to include 0INFOPROV in the query to verify the InfoProvider from which data is being pulled.
    Try a LISTCUBE on the cube to see that it contains data as per the filters, or selections in the query.
    Also check this link..
    Multiprovider showing data from only one underlying object?
    Hope this helps u..
    Best Regards,
    VVenkat...

  • Can i create Multi Provider without using Cube

    Hi,Can i create Multi Provider for ODS and Infoobject with using any Cube and
    Can i create Multi Provider for Infoset and Infoobject.
    Please give me the solution.
    Thanks in Advance.
    Regards

    Hi,
    In BW < 7.0, you can create multiproviders using:
    - and/or InfoCubes
    - and/or ODS
    - and/or InfoSets
    - and/or InfoObjects
    You can also create InfoSets using:
    - and/or ODS
    - and/or InfoObjects
    In BW 7.0, you can add the InfoCubes in the infosets.
    Remind that the multiprovider is an union, the infoset is a join.
    Regards
    Laurent

  • Unable to create Aggregate Level on Multi Provider ( Real and Standard)

    Hi all ,
       I am not able to create a " Aggregate Level " on a Multi Provider. When i say create i can't see any info Objects for selections and everything is grayed out i can't select the check boxes . Any idea on what i am doing wrong ?
    Is this an authorization issue ?

    Hi Suresh,
    Are you trying to create an aggregate on the multiprovider? This is not possible...multiprovider itself does not contain any data..

  • Multi provider

    Hi Experts.
    I have one DSO and one CUBE.only two fields are common in the both DSO and CUBE.now my requirement is i need all the fields from the DSO and some fields from the cube( which fields are not common). what is the best one to use multi provider or Info set.
    If we can achive through Info set how to do it.
    regards..roi
    Edited by: samuroi on Apr 13, 2010 2:17 PM

    Hi
    Check these links:
    http://www.scribd.com/doc/6446225/BI-Data-Modeling-Multi-Providers-and-InfoSets
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2f5aa43f-0c01-0010-a990-9641d3d4eef7
    http://www.sap-img.com/business/steps-for-creating-multi-provider.htm
    Regards
    Chandra Sekhar T

  • Report is not getting data from Remote cube thru Multi Provider

    Hi SAPians
    I ve strucked up with a Problem in The Reconciliation Report in BW3.5
    The Report was built on a Multi Provider, which was created on Basic and Remote Cubes .
    Both cubes have same Data Source and all the Objects were in Active version and found good.
    When I m executing the Report ,I m only getting the data from the Basic cube and no data is coming from Remote Cube.
    I ve checked the char " 0Infoprov " in Multi Provider and It was assigned with the both the cubes.
    What might be the problem
    Please help me in this regard
    Thanks in advance
    Regards
    Arjun

    Hi
    In the Reconciliation multiprovider, include 0INFOPROVIDER = Remote cube.
    If data still not coming, you can be sure connectivity with Source system of the Remote cube is the issue
    Check with basis to solve the connectivity issue.
    Ensure Remote cube is consistent
    Bye

Maybe you are looking for

  • 'BAPI_GOODSMVT_CREATE' takes more time for creating material document

    Hi Experts, I m using 'BAPI_GOODSMVT_CREATE' in my custom report, it takes more time for creating Material documents. Please let me know if there is any option to overcome this issue. Thanks in advance Regards, Leo

  • How to copy mailstore from one system to another ? is nfs possible?

    hello we want to copy the mailstore which is /global/mailstore/opt/SUNWmsgsr/data to a new system. we try to mount this directory with nfs in the new system in order to make a copy but i have read that nfs may cause data corruption and lose data, mai

  • E51 streaming question

    Hi all, My first post here. I have an issue when streaming audio on my E51. I am using an internet radio application. When the backlight goes out the audio streaming also stops. I have searched the setings but failed to find a method of preventing th

  • Order unit cannot be used

    Hi Gurus, Our requirement is to used the order unit.. we have previous purchase order using the base unit of material and then i update the material indicating required order unit. When we create the Purchase Order some material did not hook the orde

  • Flex, CF, SQL project

    I have project in (web development) Flex ColdFusion and SQL. I need someone to work on that project from beginning to end. I want a person who I can email if there is a problem and the problem is fixed in 24 hour period. The project hasn't started ye