To create and configure a community in a customized UI

Hi,
We are currently working on a customized UI where the client can create and configure a community in WCI.
Is there any possibility to call several special APIs like 'Get, Create and Modify Experience Definition', 'Get, Create and Modify Community Template', 'Create Rule Manager' and so on.
If there is, please give me an example or correlative API docs.
Thanks for any help in advance.

Yes this is all possible.
The only api you could use to perform these functions is the server api. But you will find there is very little documentation on this api. Your best bet is to use something like the .net reflector to "take a peek" at how the server api is used within the portal views and models or just download the UICI Portal source code.
If you are feeling a bit crazy, go to google and type "iptsession" and hit I'm Feeling Lucky :-)
you should get through to the server api reference documentation. Most people struggle with first initialising the api and creating a session. I believe there is a blog post about this online. Use the method described above and I am sure you will find what you are looking for.

Similar Messages

How to properly create and configure SharePoint 2013 Search service with PowerShell?

Hello Forum,
I have installed SharePoint 2013 across three tier servers:
WFE Server (Of course, SharePoint is installed here. Bsically this is just a Web server)
APP Server (Of course, SharePoint is installed here + Central Admin + Service Apps).
SQL Server
I now want to create and configure the Search service, obviously on the APP Server, But of course the search functionality should work correctly on the WFE server to.
I want to do this via a proper PowerShell script. I found Spence Harbar's script on: (http://www.harbar.net/articles/sp2013mt.aspx), But it has three problems, and they are as follows:
1) Spence Harbar himself literally stated on his article that this script is for: "deploying on a single server farm", But what if I have three tier servers? Could anyone please help me out in suggesting the required tweaks in the
script?
2) By default Search uses the SP_Farm account, So, How can I change the script to use other dedicated account for the search service e.g. SP_SearchAcc ?
3) How can I modify the script to specify a default Search center?
4) Apart from all the three aforementioned point - Is the script missing anything?
I would greatly appreciate your inputs - Thanks !

the only differences are where you place the components. if you are doing a small server farm with a 1-1-1, most likely you just need to change the script so that you set the index and query processing component on the front end, but the others on
the app server. just a 2 second update... just keep in mind this will work, but I am making several assumptions without any knowledge of your farm, users, capabilities.
generally, there would be more of a breakout on the topology than that, but im guessing for this farm that you wont have dedicated search servers. also, a lot depends on # users (rps really), # items in index, size of VMs (RAM for query processing,
Disk for index, etc, etc), and making sure the topology works for your particular environment and needs.
if you want more detailed topology help, which aligns as closely as possible to "best practices" (not that those exist in SharePoint, go ahead and provide the total # users, average/peak RPS for search, current index size, content source types,
VM specs RAM, CPU, #/Size of drives, HA concerns/priority (obviously isn't, since only 1-1-1)
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

Create and configure reports server in Oracle 9iAS 1.0.2.2.2 on solaris 10

Hi All,
I have installed Oracle 9iAS 1.0.2.2.2 on Solaris 10. I want to create and configure a new reports server.
Please help as I can't see anything on metalink.
Thanks/Regards
Dirish

In fact when installing 9iAS 1.0.2.2.2, the default report server name looks like this REP60_TEST.INTNET.MU.
My original tnsnames.ora was like this
REP60_TEST.INTNET.MU =
(ADDRESS = (PROTOCOL = tcp)(HOST = test.intnet.mu)(PORT = 1950))
I added an alias to the tnsnames.ora file
now my tnsnames.ora is like this
REP60TEST,REP60_TEST.INTNET.MU =
(ADDRESS = (PROTOCOL = tcp)(HOST = test.intnet.mu)(PORT = 1950))
This is working fine
Thanks

How to create and configure proxies in ADF mobile using OWSM client agent?

Hi
Can anyone please tell me how to create and configure proxies in ADF mobile application using Oracle Web Services Manager (OWSM) Lite Mobile ADF Application Agent. I read it in mobile document that,
For secured web services, the user credentials are dynamically injected using ADF Mobile uses Oracle Web Services Manager (OWSM) Lite Mobile ADF Application Agent to create and configure proxies, as well as to request services through the proxies. The user credentials are injected into the OWSM enforcement context when proxies are configured.
I am new with this OWSM, can anyone please give me some hints like how to proceed further for implementing authentication using OWSM lite mobile ADF Application Agent??
Thanks in advance
Raj

Hi Juan
The demo is very useful, and in that Shay describes about the remote login using a regular ADF webapplication as a secured one and deploying it into the server. But I would like to know how to create a local login using OWSM client agent? .
Without creating a regular ADF webapplication, how can i call secured webservices(i.e., by using OWSM client agent how to create and configure proxies to call secured webservice, where the user credentials are injected into webservice request by OWSM client as mentioned in ADF mobile document)??
Regards
Raj

How to create and configure JMSConnection Factory programatically?

Guys,
          How to create and configure JMSConnection Factory programatically and (<b>NOT THRU CONSOLE</b>)?
          There is an option using the JMSHepler to create the Queues.
          Is there an option to create ConnectionFactories using the same or other classes?
          anshuk

There are no 8.1 "JMSHelper" extensions for creating conection factories (they've been added for 9.0). Instead, you can use a variety of more generic methods.
          You can create configuration scripts using WLST or wlconfig or wlshell, or make direct calls from java into WebLogic's public JMX mbean APIs (all config tools, including the console, call into these APIs).
          For a JMX example, see the implementation of the "JMSML" utility on dev2dev.bea.com. For WLST examples search for "+WLST +JMS".
          Tom

Create and configure an OPC IO server programatically in LV 2010

Can I create and configure an OPC IP server programatically using LabVIEW 2010? Currently I create a process (using code) then wire the process name to the LV express VI to create an IO server that I have manually set the attributes for. Then I can create my shared variables and bind them to the OPC items. I would like to eliminate the manual configuration of the attributes to give my VI greater flexibility. Is this possible in LabVIEW 2010?
Thanks in advance,
AJL

Hi mani.siet.eng,
You can write data to OPC tags using LabVIEW. There are multiple ways to do this such as binding shared variables (which you can create programmatically) to the tags or by using DataSockets. Information on how to use OPC in LabVIEW can be found in this KnowledgeBase article.
If you have any more specific questions, I would recommend creating a new thread since the last activity on this one was over three years ago.
Best Regards,
Matthew B.
Applications Engineer
National Instruments

How to create and configure a user for MaxDB monitoring

Good Morning,
Is it possible to create a user in MaxDB which can only, check DB State, Data Space (Used, Available, Etc) and Log Space? If possible, how to create it and the respective authorizations?
The reason i'm asking you that is because i need to give to my monitoring team a MaxDB user which can login to the database and check the status. I have superdba and control, but these are superadmins and i would like to be able to create and give them a restricted user.
Can you help me on this matter please?
Thanks.
Best Regards,
Pedro Gaspar
Edited by: Pedro Guerreiro Gaspar on Mar 25, 2011 2:03 PM

Hello Pedro,
Check the following website for further information:
http://maxdb.sap.com/doc/7_8/default.htm
Regards,
Eduardo Rezende

How to create and configure a historical database?

Hello everyone!
I apologize if my question is duplicated,
or outside the context of the forum
and ask if it is that redirects
me to the right page!
I have a SQL Server Express 2008 R2 Database installed on a Microsoft Windows Server Standard 2008 R2 Server.
I know that SQL Server Express 2008 R2 Databases have a limit of 10 GB of data per Database.
I am going to create a JOB for Back up and a Log Shipping linking to other Server that has a SQL Server Standard 2008 R2 Server.
I know that when my SQL Srv Express goes to 10 GB into a Database I will need to clean it.
But what and how could I do to create a kind of "Historical Database", to receive all data from the SQL Srv Express, even when I clean database when it goes to 10 GB, without clean the historical database too?
Thanks!

Probably Replication is your best option.
BOL: Replication Considerations (SQL Server Express)
Replication in SQL Server Express
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

Unable to create and configure Domain in CMS

Hi,
I have created product and software components and i have defined the usage dependencies also.
After that while creating domain in CMS I am getting the following error
*SLD (URL http://pwdf3065:50000) server exception: User credentials are invalid or user is denied access*
Please help me folks...
Thanks
Harsha

1. Check if you have NWDI.Administrator Role
2. Make sure either NWDI.Admin or you have lcr.administrator role.
lcr admin is for updating SLD.
Is your SLD on a different server than NWDI?
Regards,
Nitin

How to create and configure a custom authorization service

Anyone has any idea how to create a custom authorization module? Can anyone tell me where can I find a documentation or some example how to do it?
I appreciate any idea.
Regards.

The Access Manager developer guide on the Authentication SPI should be all you need to get started
http://docs.sun.com/app/docs/doc/819-4675/6n6qfk0nf?a=view

11g: Add And Configure Group

Before OBIEEE 11g, I can create new user and configure its role in the Administration,which means different preson can see different interface or data, for example, A person can see "China" region data,but can not see "America" region data, however, B preson can see "America" region data.
But when I use OBIEE 11g, I do not know how to create and configure role. If you know the method,please help me. Thanks!

According to your link, I create new user named "A" belong to new group named "Beijing" in the BIEE console, and in the EM I also create new application role named "Beijing" that contains the "Beijing" group, then restart the server. Finally I filter the City column into "Beijing" in Administration-->Appliction roles-->"Beijing"-->Permissions-->Data filter, but when I login into the answer through A user, I see all data in the city column, do not only view "Beijing" data .
If you know the method for solving it, please help me. Thank you!

How to setup and configure NI OPC Server to OMRON PLC (CJ2H model) using FINS Ethernet communication protocol?

Hi,
Could someone help me in the setup and configuration of NI OPC server to OMRON PLC (CJ2H model) using FINS Ethernet communication protocol? I already read some materials available in the web but it uses a different PLC and communication protocol. The OPC server is installed in my laptop and I'm using Windows 8 as my OS. I used a cross over RJ45 LAN cable and connected to the ETN21 module of the PLC. I was able to confirmed the communication of my laptop and PLC by pinging the ip address of the ETN21. I also tried to configure the OPC server based on the documents I just read online. I created a channel, device and tag to the OPC server. By the way, I just need to read the data from the tag I created. Can someone also tell me how to monitor the data on the tag? I hope that you could help me. Thank you in advance.

Good day,
Try following the instructions on the driver’s help, take a look at the attach picture. It should be a good starting point. After the PLC is configured you can use this tutorial (Connect LabVIEW to Any PLC Using OPC » http://www.ni.com/white-paper/7450/en/) for a guide on how to monitor the tags.
I hope this helps
Alejandro | Academic Program Engineer | National Instruments
Attachments:
OPC Server Help.JPG ‏237 KB

Ibase and configuration error while creating a Service Contract

Hi,
I am creating a Service Contract programatically and not manually through the T-code CRMD_ORDER.
I am using the Function module CRMXIF_ORDER_SAVE for the same as the FM BAPI_BUSPROCESSND_CREATEMULTI and CRM_ORDER_MAINTAIN did not work for me because of the number of parameters that needs to be passed for creating the Service contract.
The Service contract does get created but there are errors corresponding to the Point of delivery and configuration missing.
The error corresponding to the point of delivery says "IS-U:allocate a point of delivery to the item" even though I am passing the values in the REF_OBJECTS field of the CRMXIF_BUSTRANS_ITEM structure.
Structure for the same is :
ls_objects_i-TYPE_REF_OBJ = 'B'.
ls_objects_i-object_task = 'I'.
ls_objects_i-PRODUCT_GUID = lv_product_guid.
ls_objects_i-PRODUCT_ID = p_product_id.
ls_objects_i-IBASE_COMP_GUID = ls_output-IBASE_GUID.
ls_objects_i-IB_INSTANCE = 1582.
ls_objects_i-IB_COMP_VALID = '20070926093651'.
ls_objects_i-SERIAL_NUMBER = '0102 46CC9C278B92025BE10000000AD5920E'.
append ls_objects_i to lt_objects_i.
p_ls_item-REF_OBJECT-data = lt_objects_i.
p_ls_item-REF_OBJECT-datax = 'X'.
Similarly,the error for the configuration says "Configuration for the item missing" and here again I am passing the values in the CONFIGURATION structure.
Structure for this is :
p_ls_item-configuration-data-consist = 'T'.
p_ls_item-configuration-data-kbname = 32.
p_ls_item-configuration-data-kbvers = '0.0'.
p_ls_item-configuration-data-kbprofile = 'E_H_B'.
p_ls_item-configuration-data-complete = 'T'.
p_ls_item-configuration-data-spras = 'E'.
p_ls_item-configuration-data-cfginfo = 'VCOND=VARIANT_CONDITION_KEY'
ls_cuins-OBJ_TYPE = 'SERV'.
ls_cuins-class_type = 300.
ls_cuins-obj_key = 'E_H_B'.
ls_cuins-obj_txt = 'E_H_B'.
ls_cuins-QUANTITY = '1.0'.
ls_cuins-COMPLETE = 'T'.
ls_cuins-CONSIST = 'T'.
append ls_cuins to lt_cuins.
ls_config_i-instance = lt_cuins.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
ls_cuval-charc = 'DISCOUNT_EUR'.
ls_cuval-charc_txt = 'DISCOUNT_EUR'.
ls_cuval-value = '0.0'.
ls_cuval-value_txt
append ls_cuval to lt_cuval.
ls_instance-value = lt_cuval.
insert ls_instance into table lt_instance.
ls_config_i-instance = lt_instance.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
Kindly help if anyone has worked on this.......
Regards,
Puneet Jhari.

Hi,
I am creating a Service Contract programatically and not manually through the T-code CRMD_ORDER.
I am using the Function module CRMXIF_ORDER_SAVE for the same as the FM BAPI_BUSPROCESSND_CREATEMULTI and CRM_ORDER_MAINTAIN did not work for me because of the number of parameters that needs to be passed for creating the Service contract.
The Service contract does get created but there are errors corresponding to the Point of delivery and configuration missing.
The error corresponding to the point of delivery says "IS-U:allocate a point of delivery to the item" even though I am passing the values in the REF_OBJECTS field of the CRMXIF_BUSTRANS_ITEM structure.
Structure for the same is :
ls_objects_i-TYPE_REF_OBJ = 'B'.
ls_objects_i-object_task = 'I'.
ls_objects_i-PRODUCT_GUID = lv_product_guid.
ls_objects_i-PRODUCT_ID = p_product_id.
ls_objects_i-IBASE_COMP_GUID = ls_output-IBASE_GUID.
ls_objects_i-IB_INSTANCE = 1582.
ls_objects_i-IB_COMP_VALID = '20070926093651'.
ls_objects_i-SERIAL_NUMBER = '0102 46CC9C278B92025BE10000000AD5920E'.
append ls_objects_i to lt_objects_i.
p_ls_item-REF_OBJECT-data = lt_objects_i.
p_ls_item-REF_OBJECT-datax = 'X'.
Similarly,the error for the configuration says "Configuration for the item missing" and here again I am passing the values in the CONFIGURATION structure.
Structure for this is :
p_ls_item-configuration-data-consist = 'T'.
p_ls_item-configuration-data-kbname = 32.
p_ls_item-configuration-data-kbvers = '0.0'.
p_ls_item-configuration-data-kbprofile = 'E_H_B'.
p_ls_item-configuration-data-complete = 'T'.
p_ls_item-configuration-data-spras = 'E'.
p_ls_item-configuration-data-cfginfo = 'VCOND=VARIANT_CONDITION_KEY'
ls_cuins-OBJ_TYPE = 'SERV'.
ls_cuins-class_type = 300.
ls_cuins-obj_key = 'E_H_B'.
ls_cuins-obj_txt = 'E_H_B'.
ls_cuins-QUANTITY = '1.0'.
ls_cuins-COMPLETE = 'T'.
ls_cuins-CONSIST = 'T'.
append ls_cuins to lt_cuins.
ls_config_i-instance = lt_cuins.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
ls_cuval-charc = 'DISCOUNT_EUR'.
ls_cuval-charc_txt = 'DISCOUNT_EUR'.
ls_cuval-value = '0.0'.
ls_cuval-value_txt
append ls_cuval to lt_cuval.
ls_instance-value = lt_cuval.
insert ls_instance into table lt_instance.
ls_config_i-instance = lt_instance.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
Kindly help if anyone has worked on this.......
Regards,
Puneet Jhari.

Is it possible to create a configuration profile that will install multiple network printers and their associated drivers

Is it possible to create a configuration profile that will install multiple network printers and their associated drivers?
I was not able to find profile manager on my employer's installation of 10.6 Server. Is this only a feature of 10.7/10.8 server?

10.6 server does not have profile manager, profile manager is only available in 10/7 and 10.8 server
for 10.6 server you'll need to use wgm and server admin
printer management with 10.6, I recommend you read the relevant server manuals regarding
print server and user management, printer management

Creating SSL certificate and configuring it with JBOSS 4.0.1

I have to post some data to a secured site from my application.
For this, I am creating connection to that site using URLConnection and to send data I create OutputStream using the connection.
But, while creating the stream it is showing SSLException and message is No trusted certificate found.
For this, I need to create SSL certificate (mostly using keytool command) and configure it with my application server which is JBOSS 4.0.1
Now, my problem is that I don't know the exact steps to create a certificate and configure it with JBOSS. Please provide the steps in detail.

I think you have this back to front. Unless this exception came from the server, in which case it is misconfigured, you don't have to create a certificate, you have to import the server's certificate, or that of one of its signers, into the client's truststore, and tell Java where the truststore is if it's in a non-standard location.
See http://java.sun.com/j2se/1.5.0/docs/guide/security/jsse/JSSERefGuide.html. You'll have to ask about the JBoss part in a JBoss forum.

To create and configure a community in a customized UI

Similar Messages

Maybe you are looking for