To create selection criteria for PO list

Dear MM Experts,
How we can get report on PO list on the basis of release strategy as selection criteria?
Path : IMG - MM - Purchasing - Reporting - Maintain purchase list - Selection parameters - Define selection parameters.
Please help me out.
Thanks & Regards,
Sandeep.

Hi,
You can use ME2N -> Dynamic selections -> Purchasing Document Header -> here you will find fields like
1.Release group
2.Release Strategy
3.Release indicator
4.Release status
Here input your required selection data and Save as variant for later use
Same dynamic selection also available in report *ME80FN , ME2C etc

Similar Messages

Creating Selection Criteria for an Existing CR2008 Report

I have an Crystal .rpt that works outside of SBO 8.8. It is base in a view (VIEWUNIONVENTASNOTASDETALLE). Before importing in SBO 8.8, I change a parameter that is dynamic into a static one and changed its name according. From Vendedores to Vendedores@SELECT EMPLEADONOMBRE FROM VIEWUNIONVENTASNOTASDETALLE
Once I change the report, in CR2008 I set Add-ins->SAP Businese One > Preview in SAP Business One
I get an error message, in CR2008 which is:
SAP Business One
Value cannot be null
Parameter name: o
any suggestions ?

Did you use optional parameter and in your record selection, did you use HasValue?
If so, you might want to try with removing the HasValue code in record selection.
I think when you are retrieving records based on primary key, you might get an error within SAP B1 when running the report.
Eg: If you are running a report based on OINV that require invoice Number and Invoice Date, SAP B1 request value to be mandatory entered,. I would think it is the same logic applies here.
Good luck.

Additional selection criteria for RHECM_CREATE_COMP_PROCESS (create compens

Dear All,
There is a requirement to add additional selection criteria for RHECM_CREATE_COMP_PROCESS.
Compensation Plan needs to take several optiions rather than a single option.
Incentive Plan Type to be added as additional selection criteria
Do we need to copy the standard program and then modify it or there can be some other way out for it.
Thanks and Regards
Shraddha

have checked out the SDN forums quite throughly and have come up with a couple of questions/solutions.
1) Copy the program into Z-name space and add in the code
Question: Where to specifically add the code, the program is huge with multiple enhancement points being seen in the code.
Can someone please guide me where I can change the displayed records, point where iI can append data or change the internal table being sent for ALV display.
---> U have to find out , where /how they defined Selection screeen , final output they are displaying.
2) Make changes in SPRO>Define field selection for material document list.
Question: The required field is not present within the listing, It does give the option to make new entries, but I have to specify a program/table and field.
If I create my own program to get the details and display onto an ALV Grid, will the program be called when I make selections on that requisitioner field?
---> lot of work to do
3) This is text copied from a thread, I have lost the link to it.
Create a Z report that is a copy of the selection include of the standard selection screen include with the additional selection criteria.
- Export the extra selection criteria value to shared memory.
- Submit the standard VL10G program with the selection sets.
- In user exit (depends on which field needs to be checked), import the extra selection criteria value back in and filter the selected data set.
Could someone please guide me if it is possible to do the above within RM07DOCS, and a little more detail on how to go about it?.
Better Options --->try to get the logic of MB51 , then do changes which are required.
most of data , u will get it from MSEGMKPFMARA+MBEW.
revert back in case of any other issues.
Regards
Prabhu

R12 Time Card - Is it possible to add criteria for Choice list?

Hi,
Is it possible to add criteria for choice list created using HXC_CUI_CUSTOMn_V?
If it is possible could you share which attribute to use and if could share sample code that will be great.
Thanks
Prasad

You actually have a choice of both Norsk Nynorsk and Norsk Bokmål.
First select your text then:
+Inspector > Text (T tab) > More > Language > Norsk Nynorsk / Norsk Bokmål+
The method is to label the language you want to spell check with its native dictionary. So having done the above, when you spell check it will now use the Norwegian dictionaries.
see p 115 +Working with Spelling Suggestions+ in the Pages09_UserGuide.pdf downloadable from under the Help menu.
If you don't see the Norwegian options it is because you haven't added them in the International preferences in your System preferences:
+Menu > Finder > System Preferences… > International > Language > Edit List… > Norsk Nynorsk and Norsk Bokmål > OK+
If you drag them to the top of your language list they become the System language. If you leave them lower down they are available in other menus such as Pages Inspector palette.
Peter

How to create select-options for 3 fields out of 5 by FREE_SELECTIONS_INIT

Hi Experts,
I am using the Function Modules FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG to create the select-options dynamically on the selection screen.
My problem is that I am passing a field list of 10 fields in the FIELDS_TAB of the function.
Now it creates the select-options for all 10 fields. I want to create select-options for only 5 fields initially and let the user select out of the remaining 5 fields to create the select-options.
How to achieve this.?
I tried by passing the 5 fields in FIELDS_NOT_SELECTED table but they get hidden and once hidden I am not able to get them back in my field list.
Please help me out.
Useful answers will be suitably rewarded.
Thanks in advance.
Regards,
Himanshu

Hi Experts,
I am using the Function Modules FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG to create the select-options dynamically on the selection screen.
My problem is that I am passing a field list of 10 fields in the FIELDS_TAB of the function.
Now it creates the select-options for all 10 fields. I want to create select-options for only 5 fields initially and let the user select out of the remaining 5 fields to create the select-options.
How to achieve this.?
I tried by passing the 5 fields in FIELDS_NOT_SELECTED table but they get hidden and once hidden I am not able to get them back in my field list.
Please help me out.
Useful answers will be suitably rewarded.
Thanks in advance.
Regards,
Himanshu

Selection criteria for KFS?

Hi,
is it possible to have selection criteria for the Key figurs while desingning the query?
If yes, please explain me how this could be achived?
Thanks,
Ravi

Hi ,
Thanks for the answers!
My scenario is: I have a sales document cube as well as deliveries cube! There are queries as well on these cubes!
Now , the requirement is to make a query having the info of both the cubes with the selection criteria as promised date! i had so created multicube and designed a query as well.
As promised date is keyfigure in both the cubes, i wonder whether this could be possible and thats why i posted my query!
now i think you can throw some light into it!
Thanks,
Ravi

Archiving: adding more selection criterias for MM_EKKO

Is there a possibility for adding new selection criterias for object MM_EKKO? Any exits for Release 4.6c?

Deactivated means that you have executed a 2-step archiving.
You have different residence times. SAP set the deletion flag if residence time one is met, but residence time 2 not yet.
If both times are met, the PO gets archived.
for examples see OSS note 948493 - Residence time in new reports RM06EV47, RM06BV47
You probably have customized the test variant for MM_EKKO as production variant, other wise SAP would not have updated your database.

How to create a matchcode for the list of Customers "Group key" KNA1-KONZS

Hi All,
with reference to the creation of "Group key" KNA1-KONZS for Customers,
I'd like to know if is possible to create a matchcode for the list of Customers "Group key" created.
Thanks
Gandalf

Hi
MAINTAIN THE GROUP KEY IN GENERAL DATA ---CONTROL DATA SCREEN
If the customer or the vendor belongs to a group, you can enter a group
key here. The group key is freely assignable.
If you create a matchcode using this group key, group evaluations are
possible.
KNA1-KONZS
Cya
udayakumar

DB14 Backup - No logs exist for the selection criteria for system DEV

Hello Expert,
When i click on BRBACKUP button Its showing the info message "No logs exist for the selection criteria for system" .
so please suggest me where i need to maintain the selection criteria.
Thanks & Regards
Annasaheb

Hi Anna,
As told by Markus and Eric above...
you never made a backup on you new installed system....then how system will show you backup details(which were not happened in real)
Why you are searching for money in an empty pot
Regards
Nick Loy

Student number as selection criteria for FICA transactions

Hi experts,
Is it possible to have the student number as a selection criteria for FICA transaction, for example for payment assignment, among others?
Do you have a coding example?
Regards.

FUNCTION CMAC_EVENT_0210.
""Lokale Schnittstelle:
*" IMPORTING
*" VALUE(I_SELTAB) LIKE ISELTAB STRUCTURE ISELTAB
*" TABLES
*" T_SELTAB STRUCTURE ISELTAB
*" EXCEPTIONS
*" UNKNOWN_SELECTION
DATA: ld_student12 TYPE piqstudent12,
 ld_partner TYPE bu_partner,
 ld_student(12) TYPE n.
IF i_seltab-selfn <> c_student12.
 RAISE unknown_selection.
ELSE.
to get leading zero's move the student number in a NUMC-field first
 ld_student = i_seltab-selcu.
 ld_student12 = ld_student.
 CALL FUNCTION 'HRIQ_CMACBPST_SELECT_WITH_STID'
 EXPORTING
 IV_STOBJID =
 iv_student12 = ld_student12
 XREAD_BUFFER = 'X'
 IMPORTING
 ev_partner = ld_partner
 EXCEPTIONS
 student_not_found = 1
 INVALID_PARAMETER_ASSIGN = 2
 OTHERS = 3
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ELSE.
 i_seltab-selfn = 'GPART'.
 i_seltab-selcu = ld_partner.
 CLEAR: i_seltab-xsfex,
 i_seltab-selco,
 i_seltab-selwu,
 i_seltab-selwo.
 APPEND i_seltab TO t_seltab.
 ENDIF.
ENDIF.
ENDFUNCTION.

SLED for selection criteria for batch search

good day gurus,
Is it possible to use SLED (LOBM_VFDAT) as a selection criteria for my batch search? how do i set this up?
Thanks in advance
Edited by: obie villamosa on Jun 30, 2008 11:06 AM

hi
maintained class in t-code CL01 for you characteristics then sort sequence CU70 as per shelf life, setting expiration date check by OMJE for your plamt and movment type,
maintained strategy type in spro in production
Define Batch search procedure and assign your strategy there.
then allocate your search procedure to your plant in spro
and then maintained condition type in t -code COB1 for your plant.
also maintained your class in material master in classification view for batch class
Regards
Pravin
Edited by: pravin dhokey on Jun 30, 2008 8:07 AM

Can we change the selection criteria for RV60SBAT Background Job for Billin

We have a requirement to add a new selection criteria for RV60SBAT Background Job for Billing. We want to process back order invoices first. So we want a specific background job to select these. So we want to select any orders that are eligible to be invoiced where order date < the date of background job(r sy-datum ). Any ideas where we can introduce this logic for selection criteria?
Thanks,
Matt

Hi Matt
For your requirement , copy the standard RV60SBAT program to Z program and in that copied RV60SBAT program , maintain the logic that the backorder invoices should be first processed.Then after that regular background job for billing should take happen .Then your requirement can be fulfilled
Regards
Srinath

How to create own Selection Parameter for ME2M list

Dear Sir,
We use ME2m tcode for getting list related to Purchase Order . We have been told that we can create our own "SELECTION PARAMETER" for ths report . Kindly guide us as what steps need to be done for this pl .
With Thanks and Regards
Sonia Mittal

you can also set a variant for the existing / default ME2M screen
fill all the required entries then click on GOTO >>Variants >Save as Variant
next time when you run T code ME2M, you can select the variant and run the t code
hope this will help you

Change Selection criteria for existing report in Report painter

Hi Experts,
We are on 4.7, using report painter for getting reports for Cost center & Profit Center. For one of the report we have selection criteria as Cost center and cost center group, but now user want us to add new selection field as Cost element and cost element Group to same report. We have tried all the options from GR32 ->Edit-> General Selection, but we don't find cost element in Key figure listed there.
Please let us know how can we add the new field to selection criteria. We also would like to know is this is possible with existing report to add new fields or not? Is that we need to create new report for this?
Thanks in advance..
Shilpa

Shilpa-
In my opinion the best way to troubleshoot issues like this is to go to SAP delivered standard reports and see how they are setup. For example, in your case you want to add cost element and cost element group to your report. There is one standard report from SAP - Transaction :S_ALR_87013611 which has both cost center, cost center group and cost element, cost element group in the selection criteria. You can look how this report is set up, and maintain your report in a similar fashion. Atleast this way, it will give you an idea.
Go to transaction code GRR3 and under library look for report "1SIP-001". By double clicking on the row, you will see how it is maintained.
Hope this helps.
Shail

Selection criteria for VK13

Dear experts,
How to make the field "validity" optional when running VK13? You know, if not entering the validity, the system disallow to proceed further.
Plz help. Many thanks.

Hi Cathy,
All the replies are right, the validity date is mandatory in VK13. If you go for condition information in VK13 you won't get the values, so no use.
So you have to go for Pricing Report with V/LD only, there the validity period is not mandatory.
This is how you create a Pricing report step by step
u2022 Enter Name for the List (Starting from a letter, not numbers fully) & a Title
u2022 Press FOOTPRINT button
u2022 In the new screen you have to select all key fields that should be taken into consideration in the pricing report.
u2022 Highlight all relevant fields
u2022 Press AND or OR appropriately
u2022 If you select OR ; all condition tables are evaluated, that contain at least one of the selected key fields.
u2022 If you select AND ; all condition tables are evaluated, that contain all selected key fields.
u2022 Now youu2019ll be directed to condition table list that are to be evaluated. Highlight relevant condition tables.
u2022 Select "FOOT PRINT to define the screen structure for the pricing report.
u2022 You can configure the report layout here.
u2022 Mark BLANK under u201CSelectionu201D; for fields that are not used as selection criteria.
u2022 Mark TICK to set mandatory fields on the selection screen.
u2022 Use POSITIONING to place different filed in the layout of the report.
u2022 SORT is the number determining the sequence in which the individual objects are displayed.
u2022 TEXT is used to view only Field ID or Field Text or both Field ID & Field Text.
u2022 Once everything is done, save the report. A TR number will get generated.
How to run a pricing report
Transaction: V/LD
u2022 Enter pricing report number
u2022 Press Execute
u2022 Based on the configuration you have done, selection screen will appear.
Hope this is useful to you!
Regards,
Sreehari.

To create selection criteria for PO list

Similar Messages

Maybe you are looking for