To create Warning Message in Infotype -10

Dear Gurus,
I want to create warning messages in IT0010, when doing Actions. Any inputs plz .
Thanks

HI
How r u Hope dong G8..... check the attributes of the Infotype
Rajeshk

Similar Messages

Create warning message at the time of order creation

I am looking for a solution :- "Create warning message at the time of order creation/save if a cc is assigned in the settlement rule that crosses the company code of the order or where the company code of the plant for the order is different from the company code assigned to the cc"

The txn code : IW32 (maintenance order) , this warning message for settlement rule creation using Cost center as a settlement receiver. If the used cost center is belongs to some other company code, said warning message should occure.
I tried user exit, field exit, also used std message control (KO-458). Nothing is working.

Is it possible to create warning messages in BPs?

Hi all,
We're currently using Unifier version 9.13.6.
What I would like to do, unlike a validation rule, is to create a Warning Message based on a pull down field and a chosen Work Flow Action.
For example, if the Work Order Status Pull Down is chosen as "Complete" and the Work Flow Action is chosen as "Sent For Review", the BP would advance to the next Work Flow Step.
If the Work Order Status Pulldown is chosen as 'In Progress' and the Work Flow Action is chosen as "Update", the BP record would be updated.
But if the Work Order Status Pulldown is chosen as "Complete" and the Work Flow Action is chosen as "Update", I want a warning message to pop up to warn the user that "Compete" has been chosen as the Work Order Status, but ultimately allow them to Update the BP.
Unlike a Validation Rule, which would prevent them from updating the record.
Any assistance would be appreciated.
Cheers,

Not to my knowledge. I have come across similar situations where after the user has entered a certain combination of data that I would like to provide a warning about additional info the user may/should provide, but which may not be necessary in all cases (hence validation would not work), particularly when the issue is on a detail form. The formula functions don't handle this level of logic.
This could be an enhancement, but now we’re entering the realm of scripting the system.

I am getting a warning message when i am trying to create a host-named sitecollection.

Hi guys,
I am trying to create a host-named site collection. I have created the root site collection. After that i have tried to create customer root site. I have doing this process with the guidance of this link.
http://technet.microsoft.com/en-us/library/cc424952.aspx#section2a
When i tried to create a customer root site. I am getting a warning message
" WARNING: The port specified for the new host header site does not match any known bindings in the specified Web
Application. The new site will not be accessible if the Web Application is not extended to an IIS Web Site serving
this port."
I couldn't when this warning message comes. I tried to bind the server with webapplication which is created for host-named site collection. No use.
Can anyone help me to solve. And i wanna know why this error message comes!!!
Thanks in advance
Rajendran.

First, you shouldn't create a host named site collection on a Web app that has host header named. Doing that implements host names at two different levels and will not work reliably. Second I'm not sure what you mean when you say you didn't
use the FQDN but used just the domain name. A Full url will always be either an FQDN or a shorter Netbios name. If you use a Netbios name it simply assumes the local AD domain of the workstation to create an FQDN as the url There is no way
to use just the domain name. For example, Contoso.com is the domain name. Server.contoso.com or WEbsite.contoso.com are FQDNs. YOu can also use a shorter version that is just server or website, but when those resolve in TCP/IP they would
still resolve using server.contoso.com or website.contoso.com if the workstation where your browser is was in the contoso.com domain. What is the URL for your root site and your host named site?
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Error message & warning message while creating PO

Hi,
I have one requirement like when user create PO with 'critical material',while saving PO,user should get message "critical material".
For this ,in the enhancement MM06E005,EXIT_SAPMM06E_012(functional module),
I have written piece of code
*critical Material by Jaheer,ABAP & MM specialist
LOOP AT TEKPO.
IF TEKPO-MATKL EQ '9068'.
MESSAGE ID 'ZMM' TYPE 'W' NUMBER '013' with TEKPO-MATNR.
ENDIF.
endloop.
Here whenever I put message type 'E',I am getting message "critical material".But I donot want error message ,I want only warning message,so when I changed message type as "W",I am not getting any message while checking My PO.
What is the reason?
please,Can somebody throw some light on this?
With Reg,
Jaheer

Hi
Use the badi ME_PROCESS_PO_CUST, method CHECK, with a coding as this
include mm_messages_mac.
data: header       type mepoheader,
        items        type purchase_order_items,
        po_line      type mepoitem,
        line_item    type purchase_order_item.
header = im_header->get_data( ).
items = im_header->get_items( ).
LOOP AT items INTO line_item.
IF condition IS TRUE. "critical material (line_item-matnr)
       mmpur_message 'W' 'ZMM' '013' line_item-matnr ' ' ' ' ' '.
ENDIF.
ENDLOOP.
I hope this helps you
Regards
Eduardo

General Warning Message while creating po

Hi Gurus,
Good Morning.
I want to pop-up a warning message while creating all types of PO saying that "Contact Person & Email ID text should be filled "
This message should be applicable to all PO .
How to create a message and assign in PO ?
Thanks & Regards,
Vikas

Hi Archit,
Thanks for your reply.
How to create a new Text No. & Message Text ? or if i want to use any existing text no & Message Text how can I change the Text Description ?
Thanks & Regards,
Vikas

Pop up warning message while creating PO

Hi,
How to give a Genral or a POP up Warning Message while creating and checking a PO in ME21n and ME22n.
Even i tried in changing the local setting in the menu bar, but it doesnt work.
Help and suggestions will be much appreciated.
Thanks & Regards.
Kumar.

Hi Jay,
I tired with the BADI ME_PROCESS_PO_CUST in the method IF_EX_ME_PROCESS_PO_CUST~CHECK, but still i am able to display only error message not Warning message.
Any suggestion regarding this.....
Thanks & Regards.
Kumar.

Warning message, if Quantity=0, when creating a sales order with VA01orVA02

Hi Experts,
Currently, if the user do not enters any value in QUANTITY field, while creating a sales order(or even VA02 too) ..........we are getting a Warning message(VU001).
So, I need to change it to hard error message type, am changing the message type, but, its not reflecting, and still its throwing a warning message(VU001)!!
Let me know that, What is the correct user exit to incorporate my changes?
From where this message generating? am keeping a watch point with this message (VU001), but, its not stopping!!
System is ECC 6.0
repliaes appreciated
thanq
Edited by: SAP ABAPer on Dec 22, 2008 4:38 PM

thanq
(the reason, why my original code was worked is that, I put my code in SAVE user exit!!)
yes, its working, but, the scaenrio is different, so, its like,
if the user entered my_matnr with quantity = 0,
then presses ENTER,
now, we are getting a WARNING MESSAGE of message class & # is VU001, saying the Item 000010 is quantity 0...........so, here I need to change it to HARD ERROR message.
So, as soon as press the ENTER button(after enetring 0 qty matnr)........I need to get HARD error message, so, where should I incorporate the changes? is it MOVE FIELD TO VBAP user exit?
thanq

Warning messages on programatically created document

Hi,
My program reads the data from a file which is into SharePoint 2010 and massage with the list information. It finally creates a new document and prompt the end user to save it. When user opens the saved document it consecutively prompts with the below two
message -
"The file abc.docx" cannot be opened because there are problem with the contents" [ Details: File is corrupt and cannot be opend"
How to turn off this warning messages? When I re-save this document with different name then the above messages stops prompting. I want these messages should not appear even at first time as well. I tried to add these document on trusted location and also
removed the protection settings but it does not help.
Any help will be greatly appreciated.
Best Regards,
Imran

Hi,
Which program are you using to create the Word documents? Does the program create the document based on a template? If so, please check your template extension and make sure it’s saved as .docx and not .dotx. Additionally, be sure that the template is not
in “Compatibility Mode”.
In addition, if you are using other way to create the document, please also check if the link below applies. It provided a workaround to this issue.
http://social.msdn.microsoft.com/Forums/en-US/87e03278-2e01-47fe-820f-cffe715680c8/able-to-open-word-doc-created-but-with-errors
Regards,
Steve Fan
TechNet Community Support

SQL Developer 1.5.1 - warning messages generated by CREATE TABLE

Hi,
Have an issue with a CREATE TABLE statement - it works correctly, but generates a warning message when used in SQL Developer (1.2 or 1.5.1). Full test case below:
Setup:
drop table samplenames;
drop table customers;
drop table phones;
drop table customers_phone;
drop sequence primkey;
create table samplenames
(name VARCHAR2(10));
insert into samplenames values ('dan');
insert into samplenames values ('joe');
insert into samplenames values ('bob');
insert into samplenames values ('sam');
insert into samplenames values ('weslington');
insert into samplenames values ('sue');
insert into samplenames values ('ann');
insert into samplenames values ('mary');
insert into samplenames values ('pam');
insert into samplenames values ('lucy');
create sequence primkey
start with 1000000
increment by 1;
create table customers as
select primkey.nextval as cust_id,
tmp1.name || tmp2.name as first_name,
tmp3.name || tmp4.name || tmp5.name as last_name
from samplenames tmp1,
samplenames tmp2,
samplenames tmp3,
samplenames tmp4,
samplenames tmp5;
CREATE TABLE PHONES AS
SELECT cust_id, 'H' as phn_loc, trunc(dbms_random.value(100,999)) as area_cde,
trunc(dbms_random.value(1000000,9999999)) as phn_num
FROM customers;
INSERT INTO PHONES
SELECT cust_id, 'B' as phn_loc, trunc(dbms_random.value(100,999)) as area_cde,
trunc(dbms_random.value(1000000,9999999)) as phn_num
FROM customers;
--randomly delete ~10% of records to make sure nulls are handled correctly.
delete from phones
where MOD(area_cde + phn_num, 10) = 0;
create table statement (there are legacy reasons for why this is written the way it is):
CREATE TABLE customers_phone NOLOGGING AS
SELECT cst.*,
piv.HOME_PHONE,
piv.WORK_PHONE
FROM (SELECT cust_id,
MAX(decode(phn_loc, 'H', '(' || area_cde || ') ' ||
substr(phn_num,1,3) || '-' || substr(phn_num,4,4), NULL)) AS HOME_PHONE,
MAX(decode(phn_loc, 'B', '(' || area_cde || ') ' ||
substr(phn_num,1,3) || '-' || substr(phn_num,4,4), NULL)) AS WORK_PHONE
FROM phones phn
WHERE phn_loc IN ('H', 'B')
AND cust_id IS NOT NULL
AND EXISTS (SELECT NULL
FROM customers
WHERE cust_id = phn.cust_id)
GROUP BY cust_id) piv,
customers cst
WHERE cst.cust_id = piv.cust_id (+)
Warning message output:
"Error starting at line 1 in command:
CREATE TABLE customers_phone NOLOGGING AS
SELECT cst.*,
piv.HOME_PHONE,
piv.WORK_PHONE
FROM (SELECT cust_id,
MAX(decode(phn_loc, 'H', '(' || area_cde || ') ' || substr(phn_num,1,3) || '-' || substr(phn_num,4,4), NULL)) AS HOME_PHONE,
MAX(decode(phn_loc, 'B', '(' || area_cde || ') ' || substr(phn_num,1,3) || '-' || substr(phn_num,4,4), NULL)) AS WORK_PHONE
FROM phones phn
WHERE phn_loc IN ('H', 'B')
AND cust_id IS NOT NULL
AND EXISTS (SELECT NULL
FROM customers
WHERE cust_id = phn.cust_id)
GROUP BY cust_id) piv,
customers cst
WHERE cst.cust_id = piv.cust_id (+)
Error report:
SQL Command: CREATE TABLE
Failed: Warning: execution completed with warning"
I am on 10.2.0.3. The CREATE TABLE always completes successfully, but the warning bugs me, and I have had no success tracking it down since there is no associated numberr.
Anyone have any ideas?

Hi ,
The Oracle JDBC driver is returning this warning so I will be logging an issue with them, but for the moment SQL Developer will continue to report the warning as is.
The reason for the warning is not clear or documented as far as I can tell,
but I have replicated the issue with a simpler testcase which makes it easier to have a guess about the issue :)
----START
DROP TABLE sourcetable ;
CREATE TABLE sourcetable(col1 char);
INSERT INTO sourcetable VALUES('M');
DROP TABLE customers_phone;
CREATE TABLE customers_phone AS
SELECT MAX(decode(col1, 'm','OK' , NULL)) COLALIAS
FROM sourcetable;
----END
The warning occurs in the above script in SQL Developer , but not in SQL*Plus.
The warning disappears when we change 'm' to 'M'.
The warning disappears when we change NULL to 'OK2'
In all cases the table creates successfully and the appropriate values inserted.
My gut feeling is ...
During the definition of customers_phone, Oracle has to work out what the COLALIAS datatype is.
When it sees NULL as the only alternative (as sourcetable.col1 = 'M' not 'm') it throws up a warning. It then has to rely on the 'OK' value to define the COLALIAS datatype, even though the 'OK' value wont be inserted as sourcetable.col1 = 'M' and not 'm'. So Oracle makes the correct decision to define the COLALIAS as VARCHAR2(2), but the warning is just to say it had to use the alternative value to define the column.
Why SQL*Plus does not report it and JDBC does, I'm not sure. Either way it doesn't look like a real issue.
Again, this is just a guess and not a fact.
Just though an update was in order.
Regards,
Dermot.

Receiving CO073 warning message while creating PM order for a certain equipment

Hello experts ,
Do you have an idea why i receive a warning message : Valuation data is not maintained for valuation type
While entering a piece of equipment in PM order creation screen ?
Before creating the PM order , I've entered company code and specific cost center in the master data of this piece of equipment.
When I erased cost center from equipment's master data ,warning messages disappeared while creating PM order again.
What configuration has to be done for the CO objects ? maybe MM configuration needs to be done like in automatic account configuration ?
but it is strange thaw , equipment is not a material,thus and has no valuation class in his mater data record ....
another problem is: after passing the warning message , in PM order , Location screen , the cost center is not being copied from equipment master record , which contains the cost center.
Pease advice,
Daniel

Hello
Have you assigned Business Area in Equipment Or Work Order.If yes please try remove that try to create the wo
Br
Rakesh

To through custumize warning messages while creating PO

Hi All,
I want to through some warning message throgh user exit while creating PO is there any standar message id i can use to through warning message i know '00' with number 398 but that is working only for error message.
Regards
Sagar

If you're doing these in an exit, you decide in your code whether A,E,I,W, message type. Beware though, how you present...you might want to do I messages with the "display like E" addition. I utilize message 016 from message class GR a lot...It's just placeholders and you can then issue messages with three or four values, like:
message e016(gr) with
<document> <item> 'text' 'more text'
etc.... mix and match up to four values, literals, constants, text-elements, etc.

How to Create Warning or Error message for transaction

Dear Gurus,
I understand that we can create a new warning or error message. I would like know how we tie the transaction with these message.
ex:
I want to create a warning message in MIGO when i receive goods for PO. How do i create a message a tie the transaction to it.
Regards,
Kumara.

Of course you can add own messages and message classes. But they will not be considered anywhere without proper coding.
If you want a message to appear in MIGO then you have to find an user exit where you can put your coding that will issue your own messages.

When pressing the "R" on the keyboard to record the following pop up - "Beta-only warning message-not to be localized Can't create record files please report" and then this "error occurred Result= -48" What does this mean?

When pressing the "R" key on the keyboard to record the following pops up - "Beta-only warning message-not to be localized. Can't create record file, Please Report" I press O.K. and this pops up - "Error occurred Result= -48". Can't figure out why. First time I have every had problems> What's up with this?

a -48 error is a duplicate filename.
the first things i'd try are the oddball problems fixes:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
(Let the page FULLY load. The link to your answer is at the top of your screen)

TM01 Create Fixed-Term Deposit : Warning message encountered

Hi,
I am creating Transaction in TM01. Upon saving, warning message is displayed "No accoutn assignment reference was found". What could be the possible reason why the error message prompt. and what could be the possible effect if I continue saving the Transaction.
Thanks.

Hi Kalawiswis,
To configure Acct Assignment Ref, please follow the follwoing series of links:
Financial Supply Chain Management> Treasury and Risk Management>Transaction Manager> General Settings> Accounting> Link to Other Accounting Components> Define Account Assignment References
If you are using standard AAR available, no need to create new, but recommended to create your own with correct identification parameters
Financial Supply Chain Management> Treasury and Risk Management>Transaction Manager> General Settings> Accounting> Link to Other Accounting Components> Define Account Assignment Reference Determination (OTC Transactions)
You can use the standard assignemnt or create your own rules for deriving AAR.
Financial Supply Chain Management> Treasury and Risk Management>Transaction Manager> General Settings> Accounting> Link to Other Accounting Components> Define Account Determination
This needs to be done after finalising your GL head where actual flows should post the amount with TBB1
Regards
Prasad AV

To create Warning Message in Infotype -10

Similar Messages

Maybe you are looking for