TO creation in Foreground or background in VL06P
I have created Transfer Order (TO) from Transaction VL06P.
In Transaction VL06P I have selected one delivery and selected 'TO in Background' or ' TO in foreground'. Then it went to LT03 transacton and created Transfer order.
When I take that Transfer order number and tried to see the Transfer order I am getting the Error 'Transfer order does not exists in the ware house number.
Bachi Reddy
Did you save the Transfer order (TO)? The update might have failed during saving, meaning the document did not get saved. See if you have any messages in your SAP Office: T Code SBWP.
Also check if there are any ABAP dumps- ST22,
If the above check out OK, TO creation via this outbound delivery monitor ( VL06X) has some known issues and there are several OSS notes on it. But they are mostly related to 4.6 C/4.7. What release are you in? Check them out,
For example: 630558 - VL06: TO creation in background switches to dialog mode
Hope this helps. Good luck.
Similar Messages
-
Stock transport delivery creation in foreground
Hello experts,
I am only able to create deliveries from stock transport orders in VL10B and in the background. However, I want to be able to create it in foreground like in VL01N with reference to a sales order.
Can that be done for stock transport orders as well, and if so, how?
rgds
GARDear Friend
I am a SD consultant
STO is basically a purchase order and for PO's delivery is created only in the backgound
Only for SO's both foreground and background job of delivery creation is possible
SAP's design is like that
Delivery in foreground or background doesnt make much difference to me?
Are you specifically looking for something?
So STO only background delivery creation is possible
Hope this clears your doubt
Regards
Raja -
How do I change the contrast between foreground and background in CS4 workspace menus?
Everyone at my agency who has upgraded from CS3 to CS4 is dismayed to discover that they can not read any tabs on the workspace except the highlighted one. The foreground and background colors are simply too close together for anyone who doesn't have very good eyesight to use 8 hours a day, and if you have any form of color blindness, just forget it. Is there any way to change the foreground and background colors in the workspace itself?
I don't believe it's possible. It would be like altering the ribbon in Office 2007 to make it work like Office 2003. This is a built-in function and from the upcoming betas in the Labs it appears they are going to continue this trend. Only thing I can really suggest you do is submit a feature request: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform . Outside of that there is not much you can do.
One other thing has come to mind but it only works for the document area and not other menus. Instead of opening documents in the tabs in one window you can click on Window at the top and choose Cascade to view each file in its own window and go back to Expose for fast-switching between windows. -
How to see the foreground and background colour without those sliders?
I've always found the Color Panel really annoying. A lot of space is taken up by those sliders, and I hardly ever use them.
Is there some way to hide the sliders, or—better still—put the foreground & background colours on the control panel? Shouldn’t the colours be on the control panel by default, always there in the corner?
I wonder how most people view the foreground and background colour? Does Adobe seriously expect users to have the large Color Panel constantly displayed (along with its rarely-used sliders), or perhaps we’re all expected to have the Tools Panel constantly open even though it only contains basic tools that most people know the shortcuts for?
Or is there some other way to see the foreground and background colours?
Or do most users not need to know what the foreground and background colours are?Too big, i guess you don't remember the color palettes from ps 1 and ps 2.
You might want to look at configurator to make a smaller panel that just shows the
foreground/background color chips.
http://labs.adobe.com/technologies/configurator/
MTSTUNER -
I shot two cameras for green screen editing but one of the operators zoomed and panned so the key is good but when the camera zooms it looks like the subjects are floating, any idea how to synchronize the foreground to background
Video GalI think you will need the camera tracker effect in AfterEffects, It would be best to ask in their forum.
-
New photoshop cc seems to have a bug wrt the toolbar's foreground and background squares.
New photoshop cc seems to have a bug wrt the toolbar's foreground and background squares. When I pick a color to use as a fill the squares show gray and the fill is gray rather than the color picked. Never had a problem with this in previous version of PS. Could something be set up or initialized to cause this state of affairs?
Change your document from Grayscale to RGB, or change the selected channel to the RGB data instead of a mask.
-
I'm using Photoshop Elements 12 on Windows 8.1. When I go into the Expert Edit Mode the toolbar available appears in one single column and misses off several tools including foreground and background colour. How can I restore the original toolbar?
Thanks for your help - your suggestion worked beautifully.Dennis Hood
From: 99jon <[email protected]>
To: Dennis Hood <[email protected]>
Sent: Thursday, 15 January 2015, 15:20
Subject: I'm using Photoshop Elements 12 on Windows 8.1. When I go into the Expert Edit Mode the toolbar available appears in one single column and misses off several tools including foreground and background colour. How can I restore the original toolbar?
I'm using Photoshop Elements 12 on Windows 8.1. When I go into the Expert Edit Mode the toolbar available appears in one single column and misses off several tools including foreground and background colour. How can I restore the original toolbar?
created by 99jon in Photoshop Elements - View the full discussionTry re-setting the prefs.Go to: Edit >> Preferences >> General (Photoshop Elements menu on Mac)Click the button Reset Preferences on next Launch If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7099161#7099161 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7099161#7099161 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
BDC program in Foreground and Background
Hi,
I have a requirement from client to write a BDC program which can upload the data in TABLES in foreground and background. There will be a flag for FOREGROUND on the screen, if user clicks the FOREGROUND FLAG then data should be uploaded in foreground and if flag is blank than should be in background. What statements should I used to accomplish this logic in a BDC program.
Thanks.
minisapHello,
Check this sample.
SELECTION-SCREEN BEGIN OF BLOCK BLCK1 WITH FRAME TITLE TEXT-002.
PARAMETERS: FILENAME LIKE EPSF-EPSDIRNAM
DEFAULT '\\FS000P01\D48\ANSKA\SAP_R3_ANSKA_FILES.TXT'.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN ULINE.
PARAMETERS: AP RADIOBUTTON GROUP GRP1,
PC RADIOBUTTON GROUP GRP1.
SELECTION-SCREEN END OF BLOCK BLCK1.
START-OF-SELECTION.
IF NOT AP IS INITIAL.
PERFORM UPLOAD_APPLICATION_SERVER TABLES IT_FILE
USING FILENAME
CHANGING RC.
ENDIF.
IF NOT PC IS INITIAL.
PERFORM UPLOAD_WORKSTATION TABLES IT_FILE
USING FILENAME
CHANGING RC.
ENDIF.
FORM UPLOAD_APPLICATION_SERVER TABLES P_ITAB_DATA STRUCTURE IT_FILE
USING P_FILENAME
CHANGING P_RC.
CHECK P_RC IS INITIAL.
OPEN DATASET P_FILENAME FOR INPUT IN TEXT MODE.
IF SY-SUBRC = 0.
DO.
READ DATASET P_FILENAME INTO P_ITAB_DATA.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
APPEND P_ITAB_DATA.
ENDDO.
CLOSE DATASET P_FILENAME.
P_RC = 0.
ELSE.
P_RC = 4.
ENDIF.
ENDFORM. " upload_application_server
FORM UPLOAD_WORKSTATION TABLES P_ITAB_DATA STRUCTURE IT_FILE
USING P_FILENAME
CHANGING P_RC.
DATA: FILENAME LIKE RLGRAP-FILENAME.
FILENAME = P_FILENAME.
CLEAR P_RC.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
* CODEPAGE = ' '
FILENAME = FILENAME
FILETYPE = 'ASC'
* HEADLEN = ' '
* LINE_EXIT = ' '
* TRUNCLEN = ' '
* USER_FORM = ' '
* USER_PROG = ' '
* DAT_D_FORMAT = ' '
* IMPORTING
* FILELENGTH =
TABLES
DATA_TAB = P_ITAB_DATA
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10
IF SY-SUBRC <> 0.
P_RC = SY-SUBRC.
ENDIF.
ENDFORM. " upload_workstation
Hope this will solve ur issue.
Cheers,
Vasanth -
How to change foreground and background color using CC SDK?
Hello all,
I am just starting to study the sdk (Mac CC). Currently, I am seeking the answer to change foreground and background color using CC SDK?
Is it possible to do so? In addition, will the Image Mode such as RGB, CYMK or Grayscale be effecting such solution?
Thanks in advance.These are NOT dropdown menus. They are dropdown LISTS.
http://web.me.com/toad.hall/Demo1/Drop_DownMenus.html
And from the links in the Google search you can learn that a list item has no style.
And a dropdown list behaves differently from dropdown menus. Here's how it looks on Mobile Safari : -
Exchange Messages Between Foreground and Background Tasks
I'm working on an Application where I use background task for handling Bluetooth communication. For that, I'm trying to exchange messages between foreground and background tasks when the Bluetooth device sends
something and want to notify the foreground about it. Similarly, I want the foreground to send messages to background when the user activates something. I've started doing that using event handlers but it is not reliably working. Looks like the problem is
coming from the synchronization between these two tasks. I found the class BackgroundMediaPlayer which does what I really want , except controlling the media player. What are the options of doings that?Hi Rob,
Thank you for your reply. So in this case, I guess each process shall keep reading the file and see if there are commands to be processed. Is there a way to raise an event when the content of the file get changed? Are there existing file handling classes
that support this? -
Difference in Foreground and Background processing of an object
we have implemented SAP ECC 6 on May 6th, 2008.
We are facing an issue in a BDC order creation program when run in background.
But when the same program is executed in foreground it works fine.
In issue is one of the customized condition ZFML is not getting calculated at all.
This customized condition gets determined in an user exit MV45AFZZ in FORM USEREXIT_FIELD_MODIFICATION.
Value gets calculated correctely for the conditon ZFML while executed the program in foreground but it fails in background.
The obove exit is being processed when I'm executing a BDC for creating Sales Order through the text file from application server for multiple line item. This needs to be executed every one hour through background only
When I run the BDC in foreground, It is properly executed, but in the background it is not for one particular pricing condition, which is a customized pricing for freight to determine whether for all entire order or for the each line item. System does correctly for the entire order, but not for each line item.
Is it possible that the userexit is not getting triggered in Background.
I had never encountered such situations before. I'm not able to predict this peculiar behaviour of BDC.
Any solution.
Sanjay Kumar -
+66 853-551-854Hi,
i guess that the problem with BDC with background mode,see the below theard and refer my solution
Re: add a new tab in transaction ME51N.
Regards
Kiran Sure -
Hi: I'm analyzing this STATSPACK report: it is "volume test" on our UAT server, so most input is from 'bind variables'. Our shared pool is well utilized in oracle. Oracle redo logs is not appropriately configured on this server, as in 'Top 5 wait events' there are 2 for redos.
I need to know what else information can be dig-out from 'foreground wait events' & 'background wait events', and what can assist us to better understanding, in combination of 'Top 5 wait event's, that how the server/test went? it could be overwelming No. of wait events, so appreciate any helpful diagnostic or analysis. Database is oracle 11.2.0.4 upgraded from 11.2.0.3, on IBM AIX power system 64bit, level 6.x
STATSPACK report for
Database DB Id Instance Inst Num Startup Time Release RAC
~~~~~~~~ ----------- ------------ -------- --------------- ----------- ---
700000XXX XXX 1 22-Apr-15 12:12 11.2.0.4.0 NO
Host Name Platform CPUs Cores Sockets Memory (G)
~~~~ ---------------- ---------------------- ----- ----- ------- ------------
dXXXX_XXX AIX-Based Systems (64- 2 1 0 16.0
Snapshot Snap Id Snap Time Sessions Curs/Sess Comment
~~~~~~~~ ---------- ------------------ -------- --------- ------------------
Begin Snap: 5635 22-Apr-15 13:00:02 114 4.6
End Snap: 5636 22-Apr-15 14:00:01 128 8.8
Elapsed: 59.98 (mins) Av Act Sess: 0.6
DB time: 35.98 (mins) DB CPU: 19.43 (mins)
Cache Sizes Begin End
~~~~~~~~~~~ ---------- ----------
Buffer Cache: 2,064M Std Block Size: 8K
Shared Pool: 3,072M Log Buffer: 13,632K
Load Profile Per Second Per Transaction Per Exec Per Call
~~~~~~~~~~~~ ------------------ ----------------- ----------- -----------
DB time(s): 0.6 0.0 0.00 0.00
DB CPU(s): 0.3 0.0 0.00 0.00
Redo size: 458,720.6 8,755.7
Logical reads: 12,874.2 245.7
Block changes: 1,356.4 25.9
Physical reads: 6.6 0.1
Physical writes: 61.8 1.2
User calls: 2,033.7 38.8
Parses: 286.5 5.5
Hard parses: 0.5 0.0
W/A MB processed: 1.7 0.0
Logons: 1.2 0.0
Executes: 801.1 15.3
Rollbacks: 6.1 0.1
Transactions: 52.4
Instance Efficiency Indicators
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 100.00 Redo NoWait %: 100.00
Buffer Hit %: 99.98 Optimal W/A Exec %: 100.00
Library Hit %: 99.77 Soft Parse %: 99.82
Execute to Parse %: 64.24 Latch Hit %: 99.98
Parse CPU to Parse Elapsd %: 53.15 % Non-Parse CPU: 98.03
Shared Pool Statistics Begin End
Memory Usage %: 10.50 12.79
% SQL with executions>1: 69.98 78.37
% Memory for SQL w/exec>1: 70.22 81.96
Top 5 Timed Events Avg %Total
~~~~~~~~~~~~~~~~~~ wait Call
Event Waits Time (s) (ms) Time
CPU time 847 50.2
enq: TX - row lock contention 4,480 434 97 25.8
log file sync 284,169 185 1 11.0
log file parallel write 299,537 164 1 9.7
log file sequential read 698 16 24 1.0
Host CPU (CPUs: 2 Cores: 1 Sockets: 0)
~~~~~~~~ Load Average
Begin End User System Idle WIO WCPU
1.16 1.84 19.28 14.51 66.21 1.20 82.01
Instance CPU
~~~~~~~~~~~~ % Time (seconds)
Host: Total time (s): 7,193.8
Host: Busy CPU time (s): 2,430.7
% of time Host is Busy: 33.8
Instance: Total CPU time (s): 1,203.1
% of Busy CPU used for Instance: 49.5
Instance: Total Database time (s): 2,426.4
%DB time waiting for CPU (Resource Mgr): 0.0
Memory Statistics Begin End
~~~~~~~~~~~~~~~~~ ------------ ------------
Host Mem (MB): 16,384.0 16,384.0
SGA use (MB): 7,136.0 7,136.0
PGA use (MB): 282.5 361.4
% Host Mem used for SGA+PGA: 45.3 45.8
Foreground Wait Events DB/Inst: XXXXXs Snaps: 5635-5636
-> Only events with Total Wait Time (s) >= .001 are shown
-> ordered by Total Wait Time desc, Waits desc (idle events last)
Avg %Total
%Tim Total Wait wait Waits Call
Event Waits out Time (s) (ms) /txn Time
enq: TX - row lock contentio 4,480 0 434 97 0.0 25.8
log file sync 284,167 0 185 1 1.5 11.0
Disk file operations I/O 8,741 0 4 0 0.0 .2
direct path write 13,247 0 3 0 0.1 .2
db file sequential read 6,058 0 1 0 0.0 .1
buffer busy waits 1,800 0 1 1 0.0 .1
SQL*Net more data to client 29,161 0 1 0 0.2 .1
direct path read 7,696 0 1 0 0.0 .0
db file scattered read 316 0 1 2 0.0 .0
latch: shared pool 144 0 0 2 0.0 .0
CSS initialization 30 0 0 3 0.0 .0
cursor: pin S 10 0 0 9 0.0 .0
row cache lock 41 0 0 2 0.0 .0
latch: row cache objects 19 0 0 3 0.0 .0
log file switch (private str 8 0 0 7 0.0 .0
library cache: mutex X 28 0 0 2 0.0 .0
latch: cache buffers chains 54 0 0 1 0.0 .0
latch free 290 0 0 0 0.0 .0
control file sequential read 1,568 0 0 0 0.0 .0
log file switch (checkpoint 4 0 0 6 0.0 .0
direct path sync 8 0 0 3 0.0 .0
latch: redo allocation 60 0 0 0 0.0 .0
SQL*Net break/reset to clien 34 0 0 1 0.0 .0
latch: enqueue hash chains 45 0 0 0 0.0 .0
latch: cache buffers lru cha 7 0 0 2 0.0 .0
latch: session allocation 5 0 0 1 0.0 .0
latch: object queue header o 6 0 0 1 0.0 .0
ASM file metadata operation 30 0 0 0 0.0 .0
latch: In memory undo latch 15 0 0 0 0.0 .0
latch: undo global data 8 0 0 0 0.0 .0
SQL*Net message from client 6,362,536 0 278,225 44 33.7
jobq slave wait 7,270 100 3,635 500 0.0
SQL*Net more data from clien 7,976 0 15 2 0.0
SQL*Net message to client 6,362,544 0 8 0 33.7
Background Wait Events DB/Inst: XXXXXs Snaps: 5635-5636
-> Only events with Total Wait Time (s) >= .001 are shown
-> ordered by Total Wait Time desc, Waits desc (idle events last)
Avg %Total
%Tim Total Wait wait Waits Call
Event Waits out Time (s) (ms) /txn Time
log file parallel write 299,537 0 164 1 1.6 9.7
log file sequential read 698 0 16 24 0.0 1.0
db file parallel write 9,556 0 13 1 0.1 .8
os thread startup 146 0 10 70 0.0 .6
control file parallel write 2,037 0 2 1 0.0 .1
Log archive I/O 35 0 1 30 0.0 .1
LGWR wait for redo copy 2,447 0 0 0 0.0 .0
db file async I/O submit 9,556 0 0 0 0.1 .0
db file sequential read 145 0 0 2 0.0 .0
Disk file operations I/O 349 0 0 0 0.0 .0
db file scattered read 30 0 0 4 0.0 .0
control file sequential read 5,837 0 0 0 0.0 .0
ADR block file read 19 0 0 4 0.0 .0
ADR block file write 5 0 0 15 0.0 .0
direct path write 14 0 0 2 0.0 .0
direct path read 3 0 0 7 0.0 .0
latch: shared pool 3 0 0 6 0.0 .0
log file single write 56 0 0 0 0.0 .0
latch: redo allocation 53 0 0 0 0.0 .0
latch: active service list 1 0 0 3 0.0 .0
latch free 11 0 0 0 0.0 .0
rdbms ipc message 314,523 5 57,189 182 1.7
Space Manager: slave idle wa 4,086 88 18,996 4649 0.0
DIAG idle wait 7,185 100 7,186 1000 0.0
Streams AQ: waiting for time 2 50 4,909 ###### 0.0
Streams AQ: qmn slave idle w 129 0 3,612 28002 0.0
Streams AQ: qmn coordinator 258 50 3,612 14001 0.0
smon timer 43 2 3,605 83839 0.0
pmon timer 1,199 99 3,596 2999 0.0
SQL*Net message from client 17,019 0 31 2 0.1
SQL*Net message to client 12,762 0 0 0 0.1
class slave wait 28 0 0 0 0.0
thank you very much!Hi: just know it now: it is a large amount of 'concurrent transaction' designed in this "Volume Test" - to simulate large incoming transaction volme, so I guess wait in eq:TX - row is expected.
The fact: (1) redo logs at uat server is known to not well-tune for configurations (2) volume test slow 5%, however data amount in its test is kept the same by each time import production data, by the team. So why it slowed 5% this year?
The wait histogram is pasted below, any one interest to take a look? any ideas?
Wait Event Histogram DB/Inst: XXXX/XXXX Snaps: 5635-5636
-> Total Waits - units: K is 1000, M is 1000000, G is 1000000000
-> % of Waits - column heading: <=1s is truly <1024ms, >1s is truly >=1024ms
-> % of Waits - value: .0 indicates value was <.05%, null is truly 0
-> Ordered by Event (idle events last)
Total ----------------- % of Waits ------------------
Event Waits <1ms <2ms <4ms <8ms <16ms <32ms <=1s >1s
ADR block file read 19 26.3 5.3 10.5 57.9
ADR block file write 5 40.0 60.0
ADR file lock 6 100.0
ARCH wait for archivelog l 14 100.0
ASM file metadata operatio 30 100.0
CSS initialization 30 100.0
Disk file operations I/O 9090 97.2 1.4 .6 .4 .2 .1 .1
LGWR wait for redo copy 2447 98.5 .5 .4 .2 .2 .2 .1
Log archive I/O 35 40.0 8.6 25.7 2.9 22.9
SQL*Net break/reset to cli 34 85.3 8.8 5.9
SQL*Net more data to clien 29K 99.9 .0 .0 .0 .0 .0
buffer busy waits 1800 96.8 .7 .7 .6 .3 .4 .5
control file parallel writ 2037 90.7 5.0 2.1 .8 1.0 .3 .1
control file sequential re 7405 100.0 .0
cursor: pin S 10 10.0 90.0
db file async I/O submit 9556 99.9 .0 .0 .0
db file parallel read 1 100.0
db file parallel write 9556 62.0 32.4 1.7 .8 1.5 1.3 .1
db file scattered read 345 72.8 3.8 2.3 11.6 9.0 .6
db file sequential read 6199 97.2 .2 .3 1.6 .7 .0 .0
direct path read 7699 99.1 .4 .2 .1 .1 .0
direct path sync 8 25.0 37.5 12.5 25.0
direct path write 13K 97.8 .9 .5 .4 .3 .1 .0
enq: TX - row lock content 4480 .4 .7 1.3 3.0 6.8 12.3 75.4 .1
latch free 301 98.3 .3 .7 .7
latch: In memory undo latc 15 93.3 6.7
latch: active service list 1 100.0
latch: cache buffers chain 55 94.5 3.6 1.8
latch: cache buffers lru c 9 88.9 11.1
latch: call allocation 6 100.0
latch: checkpoint queue la 3 100.0
latch: enqueue hash chains 45 97.8 2.2
latch: messages 4 100.0
latch: object queue header 7 85.7 14.3
latch: redo allocation 113 97.3 1.8 .9
latch: row cache objects 19 89.5 5.3 5.3
latch: session allocation 5 80.0 20.0
latch: shared pool 147 90.5 1.4 2.7 1.4 .7 1.4 2.0
latch: undo global data 8 100.0
library cache: mutex X 28 89.3 3.6 3.6 3.6
log file parallel write 299K 95.6 2.6 1.0 .4 .3 .2 .0
log file sequential read 698 29.5 .1 4.6 46.8 18.9
log file single write 56 100.0
log file switch (checkpoin 4 25.0 50.0 25.0
log file switch (private s 8 12.5 37.5 50.0
log file sync 284K 93.3 3.7 1.4 .7 .5 .3 .1
os thread startup 146 100.0
row cache lock 41 85.4 9.8 2.4 2.4
DIAG idle wait 7184 100.0
SQL*Net message from clien 6379K 86.6 5.1 2.9 1.3 .7 .3 2.8 .3
SQL*Net message to client 6375K 100.0 .0 .0 .0 .0 .0 .0
Wait Event Histogram DB/Inst: XXXX/xxxx Snaps: 5635-5636
-> Total Waits - units: K is 1000, M is 1000000, G is 1000000000
-> % of Waits - column heading: <=1s is truly <1024ms, >1s is truly >=1024ms
-> % of Waits - value: .0 indicates value was <.05%, null is truly 0
-> Ordered by Event (idle events last)
Total ----------------- % of Waits ------------------
Event Waits <1ms <2ms <4ms <8ms <16ms <32ms <=1s >1s
SQL*Net more data from cli 7976 99.7 .1 .1 .0 .1
Space Manager: slave idle 4086 .1 .2 .0 .0 .3 3.2 96.1
Streams AQ: qmn coordinato 258 49.2 .8 50.0
Streams AQ: qmn slave idle 129 100.0
Streams AQ: waiting for ti 2 50.0 50.0
class slave wait 28 92.9 3.6 3.6
jobq slave wait 7270 .0 100.0
pmon timer 1199 100.0
rdbms ipc message 314K 10.3 7.3 39.7 15.4 10.6 5.3 8.2 3.3
smon timer 43 100.0 -
Stuck with Foreground and Background processing in Workflow
Hi All,
I have a BDC that is acting as a method in the Business Object. The requirement is something like this: The scenario is in the Utilities System. When a customer pays a security deposit a PM (Plant Maintanence) Service Order has to get created automatically in the background. I have a BDC for creating the Service Order but the thing is that if I make that task which runs the BDC as foreground and give the agent assignment it works absolutely fine and the service order gets generated, but if I make the same task as background the Service Order does not get created. I am heavily stuck with this issue.
Has anybody encountered the same issue ?
Best Regards,
SudhiSudhindra,
Are you checking for errors after the BDC Call Transaction? What I normally do is to use the Messages into option of the BDC call and return the messages to the Task Container in case of errors.
Reasons why the method does not work in background is possibly due to authorizations or the WF-BATCH user being not known to the PM system. For instance when I create PM notifications in WF in background, I have to translate the WF initiator's user id to their Personnel Number for the Resp. Person field. If in your workflow the prior step to creating order is a dialog step, you can also try the Advance with dialog option on the background step.
Cheers,
Ramki Maley. -
Differentiate foreground and background processing
Hi All,
I want to execute a certain report in background. If the user tries to execute the program in foreground, the system should prompt him not to run it in foreground. In the same way, the message should not come if the program is run in backgroud.
That is, the system should differentiate whether the program is run in foreground or in background. How to differentiate them?
If i could differentiate, i could code a message to display when the user runs the program in foreground.
Please help me.if sy-batch = 'X' '' then it is runing in background other wise it is running in foreground
<enter ur code here, to display when running in background>
else
<enter ur code here, to display when running in foreground>
endif.
Madhavi -
Difference between foreground and background excel outputs
I am running an ABAP report and from the output generated I am saving it as an excel file . Navigating from the toolbar as : Utilities->List -> Save as local file -> Spreadsheet.
If I am running the report in background then the spool gets generated. If I display the spool and save it as Excel following the same path Utilities->List -> Save as spreadsheet it gets saved in an Excel.
The problem is the two outputs (in Excel) are not matching in format. One which is generated from foreground gets saved with lot of blank columns while the one generated from the spool gets cranked for space.
How can I have the excel generated from background (from the spool) have exactly the same format to that created in the foreground run?Hi
Foreground
1. you run directly the transaction VL04.
2. The performance can be bad.
3. The user is always the user id of the person.
4. The deliveries always will be pulled according to user setup (tcode SU3) time zone, languange etc.
5. foreground may give you option of creating deliveries individual, collective processing etc.
Background
1. You setup a job using the tcode VL04 using SM36 and monitor using SM37
2. Performance is good.
3. THe user can be changed according to the country, time zone by creating and using new batch users.
4. The deliveries are created individually but they are created a part of one collective processing document.
5. Deliveries are pulled according to the batch users eventhough you have setup the job.
Hope this wil help you to give 5 differences.
Kind Regards
Sandeep
Maybe you are looking for
-
Recebimento parcial em ME sem calculo de diferenças cambiais
Boa tarde, Gostaria de colocar a seguinte situação: Cliente - moeda local EUR Recebimentos parciais em moeda estrangeira - USD - Exemplo: Para o lançamento de um recebimento parcial em USD, na transação F-28, o cliente preenche os campos: moeda/taxa
-
Domain and User Level Security
Dear Friends Tuxedo Version : 8.0 Weblogic Server: 7.0 Operating System : Win 2000 I have successfully run the simpapp example with WTC as the connector between the remote domain (tuxedo) and local domain (WLS). Now, i want to perform authentication,
-
How much larger is an imovie file imported in FCPX
just planing to upgrade to FCPX . Would like to know how much larger wil be an imovie event file when imported into FCPX ? and for also, for instance, if a camera .mts file is 10GB .. how big when imported into FCPX ?
-
[Solved] Bug(?) regarding building glibc from abs.
/svc_auth.h sunrpc/rpcsvc/bootparam.h sysvipc/sys/ipc.h sysvipc/sys/msg.h sysvipc/sys/sem.h sysvipc/sys/shm.h termios/termios.h termios/sys/termios.h termios/sys/ttychars.h time/time.h time/sys/time.h time/sys/timeb.h wcsmbs/wchar.h wctype/wctype.h >
-
Compressor 4.1.1 ignoring H.264 settings
Hi there, Since updating to Mavericks, it's been a hassle to use Compressor 3.5 using multiple cores through qmaster. I managed to get it up and running using terminal commands, but this workflow isn't ideal. So I decided to use Compressor 4.1.1 inst