To Creative Labs: Please design a soundcard with (IFX)Insert Effects and Flash Memory ch

To Creative Labs,
Please in the future?design a soundcard that i can load a lot of (IFX)Insert effects like Reverb, Chorus, Delay, Flanger, Resonance, Equalizer but for every Sound or Soundfont I select in the Contron Panel and also?to memorize these effect settings and?at the end the (MFX)Master Effects,?Compressor and Master Equalizer?effects, like?in KORG Triton synthesizers.
Also?in that soundcard i want flash memory chips that i can load?Soundfonts and Samples?and after PC restart or Shut Down the sounds will stay in memory of the soundcard and remembered perfectly with the effects settings after Log on back to Windows.
That capabilities will be so special for musicians?and the sound will be so professional.
Thank you,
Thodoris, Greece.
Message Edited by Thodoris on 2-05-2008 04:25 PM

I have this problem only when using mic in?ventrilo. If you want to get rid of this problem you need to disable sound enchantements? in sound settings and then its fine, however you lose CMSS-3D with it. But its funny tho, if you disable CMSS-3D in Creative Control Panel you still get this issue, it only works if sound enchantements are disabled in windows sound settings.

Similar Messages

Is Adobe Creative Suite 5 Design Standard compatible with Yosemite 10.10?

Is Adobe Creative Suite 5 Design Standard compatible with Yosemite 10.10?

Yes/ No/ Maybe/ Perhaps. You will find out when you install. There are known technical issues, but most of them can be fixed or bypassed.
Mylenium

Does adobe creative suite 4 design premium work with windows 8

does adobe creative suite 4 design premium work with windows 8

yes, though you may need to use compatibility mode to install it.

Spry with DW insert, modify and delete behaviors

I posted this question before and didn't get a response. I'm
wondering if there is any documentation available for using Spry
with DW insert, modify and delete behaviors? I'd like to be able to
perform these functions without having to go from list to master to
detail page as in traditional ASP etc. According to Alex July at
Linecraft this is one of "many hidden features" in Spry.
http://www.linecraft.com/b2/index.php?p=28&c=1

"LAGooner10" <[email protected]> wrote in
message
news:fk71ad$5c7$[email protected]..
>I posted this question before and didn't get a response.
I'm wondering if
> there is any documentation available for using Spry with
DW insert, modify
> and
> delete behaviors? I'd like to be able to perform these
functions without
> having to go from list to master to detail page as in
traditional ASP etc.
Here you can find an article that covers data update:
http://www.adobe.com/devnet/dreamweaver/articles/edit_data_in_ajax.html
The server-side code is CFML, but the concept is the same.
A more complete demo, with search, insert, update and delete
is available
here (code only, no article):
http://www.massimocorner.com/spry/dynamic_spry.zip
Massimo Foti, web-programmer for hire
Tools for ColdFusion and Dreamweaver developers:
http://www.massimocorner.com

Is it permissible to upload a video on youtube with music, sounds effects, and video effects from imovie?

Lately, I've been editing and making videos for a local church in Mexico. I am not selling any of the videos. The are free to watch. However, is it permissible to upload a video with music, sound effects, and video effects from imovie? I using imovie version 10.0.2

This question comes up from time to time.
There are a number of con-men who think that they can earn a quick buck from claiming that they own the copyright to Apple’s royalty-free jingles and sound effects included with the iLife applications. These are all free to use, as clearly stated in section 2.C of the iLife Software License Agreement:
“You may use the Apple and third party audio content (“Audio Content”) contained in or otherwise included with the Apple software, on a royalty-free basis, to create your own original soundtracks for your video and audio projects. You may broadcast and/or distribute your own soundtracks that were created using the Audio Content, however, individual samples, sound sets, or audio content may not be commercially or otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, sound files, sound effects or music beds.”
http://images.apple.com/legal/sla/docs/ilife09.pdf
You should quote this (also providing the above link) when following any dispute process with YouTube.

Adobe Creative Suite 3 Design Standard compatible with MAC OS 10.10.2?

I have the Adobe Creative Suite 3 Design Standard, but when I need to print from Adobe illustrator CS3 it will popup the following error
Anyone can help?

You are welcome, Priscilla.
If you have upgraded to Yosemite without reinstalling CS3, you may uninstall in the same way as you normally uninstall, then install again in the same way as when you first installed it. You may rn the Cleanar Tool in between, to be on the safe side with regard to strange things lingering, but it should be unnecessary if everything has worked before the Yosemite upgrade.
http://www.adobe.com/support/contact/cscleanertool.html
As mentioned, you should update your CS3:
http://www.adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh
Concerning drivers I have no clue, I am afraid, being too silly to use a Mac.

Is Adobe Creative Suite 6 Design standard compatible with mac yosemite OS X?

Hello!
My Mac OS X is Version 10.6.8 and I want to update the software to yosemite! Now I´m worried if all my programs from Adobe Creative Suite 6: Design Standard still works with Yosemite? or If i will have troubles or if I have to install all the programs again?!
Thanks

Same question, same answer: You won't know until you try. There are some known issues with Yosemite compatibility in any Adobe program, including CC products, but the specifics will depend on the details. Either way, make sure to deactivate before upgrading and then reinstall CS6 afterwards.
Mylenium

How to design a form with multiple lang(Arabic and Eng) in a page

Hi All,
Could you pls help me how to design a form with multiple languages. when I set the form proprties-->Form Locale as Arabic. English text is comming in reverse and when set the FormLocale as English, Arabic text is comming in revese.
Pls help me how to design
Thanks in advance.
Regards,
Jayakar

I am not sure how you can have two different languages inside the same PDF.
Alternatively, if you want to place only the static labels, you can convert all the static label in one language to images and set the form language setting to other. And place the images inside the form using Image field. For example, you can keep the form language as English and then convert all the arabic language labels/ Static text to images.
Anotherway,
Have same sections in both the languages and hide and unhide based on the user selection of the language..
if your user chooses Arabic, then you can unhide the Arabic sections and change the form language properties programmatically..
Thanks
Srini

How to design a form with multiple lang(Arabic and Eng) in a pge

Hi All,
Could you pls help me how to design a form with multiple languages. when I set the form proprties-->Form Locale as Arabic. English text is comming in reverse and when set the FormLocale as English, Arabic text is comming in revese.
Pls help me how to design
Thanks in advance.
Regards,
Jayakar

I am not sure how you can have two different languages inside the same PDF.
Alternatively, if you want to place only the static labels, you can convert all the static label in one language to images and set the form language setting to other. And place the images inside the form using Image field. For example, you can keep the form language as English and then convert all the arabic language labels/ Static text to images.
Anotherway,
Have same sections in both the languages and hide and unhide based on the user selection of the language..
if your user chooses Arabic, then you can unhide the Arabic sections and change the form language properties programmatically..
Thanks
Srini

Can I make a website with just using Photoshop and Flash together?

I am new to web design and am working on a website. I have not purchased dreamweaver, but am familiar with it from school. I do have Adobe Flash and Photoshop extended. Can I just use the two programs Adobe Flash, and Photoshop extended to complete a website without having Dreamweaver or do I need Dreamweaver to make it work? Thank you for your responses.

You can import photoshop files into a flash project and build a website that way. Both Catalyst and Flash can output the markup necessary to make your flash website usable. As a developer though I try to steer people away from entire flash websites since they wont be usable on Apple Mobile and Tablet Devices. Youll need to read up on optimizing a flash sites SEO, this can only partially be done through flash. A text editer may be required to create additional files for your website. Good Luck!

Brush with "drawing object active" and Flash crash

I use to draw with the brush tool and the "object drawing mode" back in Flash CS3, and every thing was working OK, but since Flash CS 5.5, it crashes very often, just wondering if there is something new I missed in CC, as some preference, because it still crashing when it's active.

Hi,
Which version of Flash Pro are you currently using??Could you please update to the latest version of Flash Pro CC 2014 from Animation software | Download free Flash Professional CC trial as lots of issues pertaining to brush have been addressed in this release.If you still face the issue,can you please attach a video demonstrating the issue.?
Thanks,
Sangeeta

Wanting to upgrade Sawtooth 400 with new hard drive and more memory

Have been reading a lot of posts today on the above upgrades. Am quickly getting confused on all of the info, especially on the hard drive upgrades...
Purchased my Sawtooth back in Dec. 2006 on eBay. Should have been using it all of this time, but my budget wouldn't allow me to put more memory (it's got 256MB now) and a new hard drive in it. Tired of seeing it in the way just sitting there!
The G4 has OS X 10.3 on it. Would like to upgrade to Tiger. Is there a firmware update that needs to be done before upgrading to Tiger? I know that 256MB of memory really isn't enough for Tiger. I thought about getting at least a 512MB stick to make the total memory 768MB (wish I could afford to max the memory). Others have said that OWC and Crucial have good quality memory.
The System Profile shows that it has 10 GB and 60GB hard drives. Imagine the 10GB one is the original. The 60GB was probably added on later. Don't know how old the 60GB is. That's one reason I'd like to replace it to at least a 120GB drive, so I can start fresh without worrying about the 60GB dying. (Do understand that any drive can die; new or old...) Have read about the 128GB size limit on my G4. Don't think I'd use most of the 120GB, so I'd like to stay with that size. Budget won't allow to install a PCI card to allow larger drives anyway. Should I remove the 10GB one as I don't think I'd be using it at all?
I installed a Seagate 120GB Barracuda Ultra ATA/100, 7200RPM, 8MB Cache, 3.5" drive (new, got it on eBay for $40!) in my iMac G3 400. Would like to find the same kind of drive for the G4, if it would work. If the same drive would work in the G4, does anyone know where I could purchase one? Will look on eBay etc. in the meantime.
Thanks for any advice and/or suggestions.

Got the Seagate HD installed, PRAM battery replaced and missing PCI cover replaced. Sure wished that I had the extra memory to install now, but I haven't had the chance to order it yet. I know it's easy to do, but I'm going to have to move the Mac to the table and it's heavy for me to lift (bad back).
Anyway, I started to install OS 9 on the Seagate and have hit a stumbling block! Didn't have this problem when I replaced the HD in my iMac, but it was only a 120GB drive (it needed the firmware updated).
I've looked at other posts on installing OS 9 and even on Apple's support documents and can't find what I exactly need to do! Am getting more confused about it the more I try to find the right answers... Hope one of you can help me some more.
I was able to boot the Mac up from the CD (it's the white one with the orange "9" on it). I clicked on the "Mac OS Install" icon, click on "Continue" (on the "Install Mac OS 9) dialog box, and then it says: A valid destination volume can't be found. To continue the installation process, mount a valid volume for software installation." The destination disk options is grayed out. I then clicked on the "Utilities" icon, and then the "Drive Setup" icon. It shows a list of drives and I clicked on the <not initialized> Type ATA, Bus 2, ID 0, LUN 0 and clicked on the "Initialize" button. Then it says: New Partitioning: 1 Mac OS, Initialization Options: None. If you click on Custome Setup, it says that the Partioning Scheme is "Current Volume," 131072MB (131GB?), under Volume Info Type it says Mac OS Standard. The "OK" button is grayed out. If you click on "1 Partition" on "Partitioning Scheme," then the Volume Info Type says "Mac OS Extended, with Size showing 131071MB. The "OK" button is not grayed out. I didn't go any farther with the OS 9 installation, as I don't know what the heck I'm doing! Don't want to mess something up. Do you or anyone who has helped me with this posting, know the steps I should take next? The Seagate Owner's Manual says if you have a system that can't read the entire 160GB, to just partition the drive for 137GB for now if you don't want to add a PCI controller card etc. For now, all I want to do is use the 128 or 131GB (according to what it says) of the 160GB drive without using a different card or software to recognize all of the 160GB. Do I just do one partition or two... and what else? I'm completely lost...
Sorry for the long post, but had to write down the steps I took, so someone could tell me what to do next.
I don't think you have to worry about PRAM settings; they pretty much take care of themselves - and regenerate when they have to. The time to think about PRAM is when you introduce new hardware and catch your Mac expecting same old, same old, and it isn't.
It was kind of hard to get the old PRAM battery out of its holder. I pryed the right side retainer tab just a bit with a screwdriver to get it out. Noticed that one part of the retainer at the base was cracked! Hope I didn't do that! Put some super glue on the crack (was on the outside only from what I could see). Cleaned off the battery contacts with a pencil eraser and dry Q-tip before installing the new battery. It seems to stay in place even though with the side retainer cracked. If the side retainer would break off the next time the battery would need replacing, would the battery contacts hold it ok? Or would the whole logic board have to be replaced? I put a SAFT 3.6v LS14250 battery in it. The old one was a SAFT LS14250C. Hope the "C" at the end doesn't mean anything.

Is there an easier way to work with adobe after effects and final cut pro x

I use adobe after effects and I am thinking about deleting motion and compressor ( I can always install again). If you have a good reason to keep those apps let me know because I don't want to be hasty. If I delete them and stick with after effects and final cut pro... Is there a secret to easy working between FCPX and adobe after effects?
Thanks

You'll go from FCP X to and from Motion a lot easier than AE. Motion does pretty much anything AE does, most of the time faster and easier. Without Motion, you can't do custom templates. You can't customize the encoding of files without Compressor. Why would you want to remove them from your system? Leave them, use AE if you want along side of them. But I'd learn Motion first. Cause AE doesn't read FCPXML, so going back and forth between them is a PITA.
And until Apple releases the round trip between FCP X and Motion fully, we have this gem:
http://www.alexnking.com/2012/02/20/fcpx-send-to-motion-app/

Software distribution error with LMS 3.2 regarding flash/memory size

Hello,
I'm accustomed to LMS raising warnings about memory size not being enough when in fact there is enough space (eg : there is 256mb, IOS requires 256mb, but LMS calculates 255.234mb, and says there is not enough memory). I've encoutered that situation many times with LMS 3.1 and just learned to ignore it.
But since I've upgraded to LMS 3.2, we are now getting _errors_ which are preventing us from deploying the IOS, even though there is still enough memory and flash space. I've read in another thread about bug CSCsu49349 but this one should be fixed in LMS 3.2, so I am at lost.
I always download my IOSes from Cisco.com using LMS so that the proper fields are populated.
Here is one sample : I was trying to deploy an IOS to a 2821 router. The IOS weighs 29Mb in reality and I have around 31Mb of free flash, and the whole flash is 64Mb, but I get a catastrophic error. Also note the contradictory warning about the memory size :
Warning - SWIM1065: Minimum RAM requirement of the selected image: 256 MB .
RAM available on the device ( 256 MB) May not be enough to activate the selected image.
Increase the RAM size for the device, select a different image for upgrading, or
specify the RAM size for the image by editing the attributes of the image stored in the software repository.
Warning - SWIM1070: Feature subset of the Active image could not be determined.
Catastrophic - SWIM1200:Selected Flash partition requires minimum (64 MB) to upgrade selected software/image.
Select a different Flash partition for upgrading the image.
Do I need to modify the flash requirement on the image to get around this, or is there a patch available for LMS 3.2 ?
Thanks for the advice,
Alex.

Hello,
After running another inventory to make sure, I get the same error. Here are the steps of the distribution process (we can see I have enough room for the IOS, barely, but still enough) :
Afterwards I get the failed message :
And the same error message :
Thanks for the help!
Alex.

MAKE A iPHOTO ALBUM ON A CD WITH KEN BURNS EFFECT AND MUSIC

I'd like to know how to save an album using the Ken Burns effect (pictures automatically panned or zoomed) and the music I've saved to the album from the samples given in Iphoto. When I try to open a CD with an album on it on a Windows pc, I get only the pictures and neither the Ken Burns effect nor the music, so all I can run is a simple slideshow, which looks anemic when compared with the full effect available on the Mac. Any ideas?

Export the Slideshow as a Quicktime Movie (File -> Export) and burn that to the CD.
Regards
TD

To Creative Labs: Please design a soundcard with (IFX)Insert Effects and Flash Memory ch

Similar Messages

Maybe you are looking for