To date for document date field in setup initialization

Hello All,
We are filling setup table for 2LIS_02_SCL and we are giving the restriction on document date in transaction oli3bw. Since there is a very large amount of data, we are restricting the start document date by 18.06.2009.
We would like to run regular deltas after initialization. So should we enter an end date ?
Can we enter 31.12.9999 as the end date ?
Please suggest the end date for the document date selection.
Thanks and Regards,
Radhika

There is no need to setup an end date on your InfoPackages because once you create and schedule the delta job for this extractor in LBWE, it will capture the deltas for you no matter the dates on the purchasing document.
When doing your initialization on BW, don't put any selections. Just do an Init w/o Data Transfer and then do concurrent Full Repair extracts using the same selection criteria you did for the setup jobs. You'll get improved throughput by doing this, especially if you execute multiple InfoPackages, with different selection criteria, in parallel.
Once you have your delta job scheduled, you can then execute a delta InfoPackage.

Similar Messages

DOCUMENT DATE FOR BACK DATA TO BE UPLOADED

hello experts,
I have a purchase cube with TD from last year.
I have PO NUMBER as a characteristic AND 2LIS_02_SCL as datasource for Purchase.
now i want the date on which PO is created and there is a DOCUMENT DATE available in the datasource.
now i have added 0Doc_date as a characterstic to the cube but the date is coming in the report instead # is appearing in Doc date column.
when i am checking the data in PSA the document date value is available correctly .
Now please help to load the document data for the back data.
how to do this so that the Transaction data should not get affected and i get the Document date for the previous PO numbers also.
plz explain in details.
will be very thankful

Hi,
Delete one Request of that data source from Cube
and then Reconstruct it.
check whether the data for document date is coming or not
if it is coming then delete all the request and reconstruct.
it will reflect after that.
Edited by: obaid shaikh on Mar 17, 2011 1:47 PM

Default Data for Document Fields D_CUII_TYP

Hi experts,
I am trying to define default data for document fields in Export Switzerland.
Source field is G_IMPCN, target field is D_CUII_TYP.
I create the following master data, i.e.
G_IMPCN = 39095000
D_CUII_TYP = FREI
meaning if G_IMPCN is 39095000 then Legal Document Type FREI is being created automatically.
Then I run the default data function on document level but nothing happens.
The log shows G_IMPCN with value 39095000 but D_CUII_TYP = FREI is missing.
Do you have any idea what else I should do to resolve this issue ?
Many thanks for help which is much appreciated.
Best regards,
Corinne

Hi Corine,
Be careful with the logs, they are quite confusing as sometimes it displays the value it is looking for and sometimes the value it has foud. And sometimes the green and red lights are wrong or put in a logic that is confusing.
Most likely it does not find the value because it is looking in the Import numbering in the import scheeme. Did you try with STAWN ? At any rate, if I may suggest, you need to setup the system with having the commodity code in the Declaration, because if you do not have the Scheme CHEXP defined in the Scheme for commodity code you are going to face trouble when trying to retransfer the Tarification to the feeder System.
Keep me posted.
Regards,
Marc

How to get the histoical data for newly added field in the cube?

Hi Experts,
I have small doubt on remodeling the infocube.
After adding the characteristic or keyfigure to a cube by using remodeling concept, how can I get the historical data for that particular field.
I have searched in SDN also but I didn't get proper information.
Please excuse me if I posted repeated question.
helpful answer will be awarded with poitns.
Thanks & regards,
Venkat.

hi
depending on your customer need you could use the remodelling functionnality but sometimes you have no way to retrieve what you want so another option you should consider is the following:
Advantages
that will cost less effort and guarantee the result.
Drawbacks
data is redondant for a while
space (depending on the volume of historical data)
So here are the steps :
step 1Adjust your extraction process according to the fields you need to add to populate the cube.
step 2 Then create a dso next or even a cube, feed the dso with a full load with the enhanced extractor you adjusted with the new fields in step 1 only once in fact this should be one shot.
step 3 Copy the query to the previous built multi-provider on top of the new historical data from dso and the running live delta cube. Adjust the queries if necessary.
optionnal Then if you want to get rid of the dso or new cube for historical data you could empty the actual one push the data from the new data provider and that's all.
bye
Boujema

Variable for Document Date in Customer Receivable Aging

Hi all,
This is regarding u201CCustomer Receivable Aging u2013 Detailsu201D in SBOne.
In the print layout, I found 3 types of date in system variables i.e.
1) system variable 184 = Due Date
2) system variable 185 = Posting Date
3) system variable 187 = The is vary by u201Cage byu201D Date (either document date, posting date or due date)
Regardless the date chosen for aging, we would like to display both Invoice (Document) Date and Due Date permanently on the layout.
Does anyone know what is the system variable for invoice/document date in this layout. Thanks for help in advance.
Regards,
Eric Tan

Sorry this is no right answer. I had test it variable 65 doesn't work.
I found that the System variable 187 will be either document date, posting date or due date based on the aging date selection in Receivable Details Aging Report
Any other advise.How to check the all the variable in Receivable Detals Aging Report.
Thanks.

How to set a default date for a custom field of Date type in project server 2010.

hi,
can somebody help me.
How Can i set the default date for a custom field of date type in project server 2010 ?

Dear Rohan,
You can set default value to custom field thru Lookup table. Assign lookup table to custom field and set default value to some lookup value (Note: check the “Choose a value to use as a default when adding new item” checkbox).
Regards,
Avinash kumar | Blog:http://avigr8.wordpress.com | If you found this post helpful, please “Vote as Helpful”. If it answered your question, please “Mark as Answer”.

Baseline Date for Due Date Calculation required for S/L indicators

Hello,
Iu2019m facing the following problem
Iu2019m trying to insert an invoice (using a customer master record) but the system blocks me because the field ZFBDT (Baseline Date for Due Date Calculation) is a Required entry.
The strange thing is that if I use a S/L indicators the field is mandatory, if not the date may be defaulted.
I checked in OB41 but there are non differences between Special PK and normal PK.
Any ideas?
Thanks in advance
Alberto

Dear Alberto,
the field "Due On (BSEG-ZFBDT)" cannot be controlled with field status.
It is controlled by field attribute of screen painter (Tcd: SE51). If
you look at element attribute for "Due On" field, a flag for required
entry is activated. In this case, field status has no control over
the field.
As of release 3.1G, field BSEG-ZFBDT is hardcoded in most FI screens
to be mandatory and cannot be influenced by any field status
changes. This situation is only valid when posting with special G/L
indicator (ie PK 29/39).
SAP development team has determined that this is a critical field. The
reason behind this is that this special GL screen and the data entered
here are very important to many other programs. This data affects
liabilities and receivables where due date is necessary almost
everytime. Thus, we changed this field in this screen in order to
prevent problems in many other areas. The reason is explained further
in note 95079.
I hope this helps You.
mauri

Translation date from document date instead of posting date

I have a requirement to set automatically Translation date from Document Date instead of Posting Date as usual in SAP.
My company code hasnu2019t got neither 2nd local currency nor 3rd local currency.
As usual, when posting transactions in foreign currency, translation date is derived from posting date.
I would like to know if is possible to set that translation date would be derived from document date. As I said before, because of the company code only has one currency defined, is not possible to change it in OB22.
Thanks a lot

Has anyone ever tried to change the Translation date on the FI documents generated by F.05 (FBB1). I am having this requirement at one of the clients I am working on. I need to substitute the document date in the translation date field. I tried using substitution through GGB1 (OBBH) and also I tried using the BADI - FI_TRANS_DATE_DER, but none of the two options work.
Is there any other option to do it or did anyone had any success in doing this????
Appreciate all the responses.
thanks in advance.

Posting date or document date

hi all,
for baseline date, i can base on posting date or document date.
may i know where in spro, we can define the baseline date to be based on posting date or document date to calculate the net due date depending on the days in payment term?
example
posting date 20-08-2008
document date 18-08-2008
payment term 10 days
so net due date is either 30-08 or 28-08 depending on posting or document date.
thanks

Hi,
When you are creating a payment term with Tcode OBB8, there a radio button option is available. Choose among the four options.
1) Posting Date
2) Document Date
3) Entry Date
$) No Default.
Hope this will fix ur issue.
Thanks,
Srinu

MIRO - Posting Date and Document Date

Dear Gurus,
I have a query regarding Posting date and Document Date of Invoice Document.
I want to keep and restrict user to keep Posting Date and Document date same (current date) and want to restrict user from changing posting date, as i want to kep posting date and document date as same. Please suggest if there is any exit or any control i can implement in order to achieve this.
thanks & regards,
Prashant Rathore.

Hi
You can create a new Screen / transcation variant, in which the posting date and document date will have displau as field status.
Regards

Powerpivot for sharepoint error: Unable to refresh data for a data connection in the workbook

Hello,
I have three errors when i try to use a simple powerpivot workbook published in sharepoint: (nothing on google has help me..)
1-Unable to refresh data for a data connection in the workbook.
Try again or contact your system administrator. The following connections failed to refresh:
PowerPivot Data
2-The embedded PowerPivot data in the workbook cannot be loaded due to a version mismatch
3-01/21/2012 17:26:47.08 w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel
Calculation Services    bccc Medium Session.HandleTrimmedWorkbookReloading: userOperation ApplySlicerSelectionOperation requires BaseWorkbook: "http://crm2011:2020/Marketing%20Reports/test2_excel32bits.xlsx"
[0x409] [Saturday, 21 January 2012 09:40:18] [BaseWB ID: 2] to be untrimmed if it is currently trimmed. The workbook is currently NOT trimmed. fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.08 w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel Calculation
Services    f1va Medium CWorkbookWrapper::CWorkbookWrapper: Created with ID=4 fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.09 w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel Calculation
Services    eq3r Medium ConnectionRequest.ConnectionRequest: New connection request. SessionId=1.V21.4PI+fCwIq52LH++nOoMzs90.5.en-US5.en-US73.-0060#0000-10-00-05T03:00:00:0000#+0000#0000-03-00-05T02:00:00:0000#-006036.bfceb31b-7122-46ca-9e2a-ae52cefcfcaf1.N,
WorkbookVersion=ConnectionInfo.WorkbookVersion: Uri=http://crm2011:2020/Marketing Reports/test2_excel32bits.xlsx, Version=Saturday, 21 January 2012 09:40:18 fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.12 w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel Calculation
Services    aysl Medium Succeeded to initialize a chart. fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.12 w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel Calculation
Services    8xk9 Medium ExternalSource.ExecuteOperation: We exhausted all available connection information. Exception: Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException: Exception of type
'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException' was thrown.     at Microsoft.Office.Excel.Server.CalculationServer.ConnectionInfoManager.GetConnectionInfo(Request request, String externalSourceName, Int32
externalSourceIndex, Boolean& shouldReportFailure)     at Microsoft.Office.Excel.Server.CalculationServer.ExternalSource.ExecuteOperation(Request request, ExternalSourceStateInfo externalSourceStateInfo, ExternalSourceStateInfo prevExternalSourceStateInfo,
Int32 index, ConnectionInfoManager connectionInfoManager, ExternalDataScenario scenario, DataOperation dataOpe... fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.12* w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel Calculation
Services    8xk9 Medium ...ration, Boolean verifyPreOperationConnection), Data Connection Name: PowerPivot Data, SessionId: 1.V21.4PI+fCwIq52LH++nOoMzs90.5.en-US5.en-US73.-0060#0000-10-00-05T03:00:00:0000#+0000#0000-03-00-05T02:00:00:0000#-006036.bfceb31b-7122-46ca-9e2a-ae52cefcfcaf1.N,
UserId: 0#.w|contoso\manager fb614a65-e398-4b97-a98d-fb7b23eab39f
My server and client olap versions are the same: MSOLAP.5, i used sql server 2008 R2 SP1 and sharepoint 2010 SP1 and reboot or iisreset have no effect
Thanks in advance for your help

Hello Challen Fu
I would be so grateful if you could please help me out
I have been trying to find a solution to the same error message
In my case, the power pivot reports were working before on a regular team site , but then two things changed:
a) I created a toplevel site using the BI Center template. Now I am using a Business Intelligence template , created a power pivot gallery library and uploaded a few powerpivot reports
b) On the  backend, the database instance was upgrated to SQL Server 2012
     Front end Server VDSP01 remains SQL Server 2008 R 2 where Sharepoint 2010 was installed as a FARM
Now, the reports will display in sharepoing however they will not refresh. the error message i get is the same.
Scenario recap:
a- Server VDSP01 uses SQL Server 2008 R 2 where Sharepoint 2010 was installed as a FARM
b- On the back end, the database instance name was replaced with SQL 2012 Server:
         from SQL Server 2008 R 2 (instance DBDEV-COTS\COTS)
           to     SQL Server 2012 ( instance VTSQL01\COTS)
c-  I was told that:
     From VDSP01, they ran
CliConfg.exe to create SQL Server Alias :
       where    BEFORE: vdsharepoint --> DBDEV-COTS\COTS
            and AFTER    : vdsharepoint --> VTSQL01\COTS
I appreciate in advance any help you can provide<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe" stroked="f">
<v:stroke joinstyle="miter">
  <v:formulas>  <v:f eqn="if lineDrawn pixelLineWidth 0">
  <v:f eqn="sum @0 1 0">
  <v:f eqn="sum 0 0 @1">
  <v:f eqn="prod @2 1 2">
  <v:f eqn="prod @3 21600 pixelWidth">
  <v:f eqn="prod @3 21600 pixelHeight">
  <v:f eqn="sum @0 0 1">
  <v:f eqn="prod @6 1 2">
  <v:f eqn="prod @7 21600 pixelWidth">
  <v:f eqn="sum @8 21600 0">
  <v:f eqn="prod @7 21600 pixelHeight">
<v:f eqn="sum @10 21600 0">
</v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:formulas>
<v:path gradientshapeok="t" o:connecttype="rect" o:extrusionok="f">
<o:lock aspectratio="t" v:ext="edit">
</o:lock></v:path></v:stroke></v:shapetype> <v:shape alt="" id="Picture_x0020_2" o:spid="_x0000_i1025" style="width:630pt;height:475.5pt;" type="#_x0000_t75">
<v:imagedata o:href="cid:[email protected]" src="file:///C:\Users\wlarange\AppData\Local\Temp\msohtmlclip1\01\clip_image001.jpg">
</v:imagedata></v:shape>
wanda larangeira

Goods Receipt and Goods Issue - Posting Date and Document Date Problem

Hi All,
I was using SDK to build own add on to insert Posting Date and Document Date under Inventory> Inventory Transactions> Goods Receipt and Inventory> Inventory Transactions> Goods Issue, but the UI Screen Posting Date and Document Date shown current date.
My SAP Business One version was 2007A SP00 PL42 and alreadly upgrade to SP05.
End up result still the same.
Is there someone can help me?
Thanks you.
Best Regards,
danny

Hi there,
I already solve it by myself.
Actually is i call the initialization twice:
Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenEntry)
Thats what make this problem happened.
Sorry.
Best Regards,
danny

There is no source data for this data record, Message FZ205

Hi Experts,
I am facing a problem with the DME File download. This problem happened all of sudden in our production system since last month and it was never before. Our system landscape has also not been changed but as per our basis consultant he has added two-three more new application server to the Production client. Even we do not have this problem in our testing clients.
Please note that we have been using the output medium '1' from the day one and thus the system has been generating the DME in 'File System' which we download on the desktop and upload the same to the bank online. After running the payment run when we trying to download the DME File, the system gives the error "There is no source data for this data record, Message FZ205".
I tried to fix this issue through many ways but not able to. So can you please let me know the reason of this error and solution to fix this.
With best regards,
BABA

Hi Shailesh,
Please share how you solved this problem.
Many Thanks,
Lakshmi

How to get current date for posting date

hi,
how to get current date for posting date ? any sample code ?
Thanks

Hi......
Use
Select getdate()
for current date.......
Regards,
Rahul

Approval for Contract and Order based on PO date and Document Date Combinat

Dear All,
I have a critical requirement from my client.
1. If the PO date in the contract is less than 10 days or more of the document date [Created date] then further process should not be allowed. Only authorized person should release the contract, and then order creation should be possible.
For example: Customer PO date is 18-07-2011 and if the document date is 28-08-2011, then system should stop for further processing. Only after release this should be allowed to proceed.
2. Sales order scheduled date for item is 30.07.2011 and if the PO date is 18.07.2011 again system should again go for approval. Business requires this because the time gap between the PO date and the delivery date is very short, so only on approval the next process should be allowed.
Is this possible through Status profile? I have tried this but I canu2019t give condition like if it less than the PO date system should go for approval.
Kindly guide me if this is possible and share your ideas.
Best Regards,
Venugopal

Hi Venu,
In user eixt USEREXIT_MOVE_FIELD_TO_VBAP (inlcude MV45AFZZ) write the code to compare the PO date and contract creatioon date and if the PO date is 10days less than the contract creation date reject all the line items with a special reason for rejection at the item level if the document is a contract or if the document is a sales order then populate a delivery block.
Regarding the authorization to release the contract you can think of below options.
Give authorization to only specific people to remove the reason for rejection or remove the delivery block.
Or
If you want to automate the approval process then based on the delivery block setup workflow which will raise an event and trigger an email to the approver inbox. For the approval you can give options like Approve/Reject. Based on the apporver's action design the workflow to change the contract accordingly i.e either removing the delivery block or keep it as it is.

To date for document date field in setup initialization

Similar Messages

Maybe you are looking for