To Delete the Entire Data from the Tables

Requirement ::
To use select Options for table name and based on the table names we want to delete the data from the tables...
conditions :
we have to first check if the tables having mandat and the configuration tables if this tables then dnt delete the data from this tables. if the table other than mandat n config tables the data will be deleted from other tables.
Input On Selection Screen :::
Name of the tables : :         we want to select multiple table names using select options.
Type of Update       : :          Synchronous / Asynchronous
Test Run                 : :          /* if test run is selected the tables will be validated based on the condition and the data is not
                                               deleted from the SAP tables or the status is not updated . untill u run Actual run.
Actual Run              : :         /* Here finally the data will be deleted from the SAP tables . the changes finally will be reflected in
                                               Actual run...to the SAP Tables
Output Required :::
srno | Table name   |   No.of Records deleted   |    Date    |    Time
Please provide me the sample code for the above Requirement ...
Thanks in Advance....
Moderator message : Spec dumping is not allowed. Thread locked.
Edited by: Vinod Kumar on Sep 30, 2011 4:54 PM

Venkat,
I belive in LBWQ you can only see one entry for an application. You'll see only one entry MC*18 for all your datasources.
Do one thing. Do not delete from there. Run your "Job Control" job which moves all the data from LBWQ queue to RSA7 queue, making your LBWQ queue empty. Now go to RSA7 and delete your data for the specified datasource...
Been a while since I looked at those screens, but I believe I am right.
Good Luck
Gova

Similar Messages

How to take the print out of the entire data from the waveform chart

i am using cont acq to spreadsheet file.vi to acquire data from a number of channels. this vi also plots the acquired data on the waveform chart. i want to take the print out of the entire data. how can i do it ?
also how can i take print out of the data between given interval??
please reply me
thank you

There are a number of different ways of achieving your goal. Depending on which version of LabVIEW you have and which development environment, the Report Generation Toolkit is a very powerful tool. Attached is an example that prints the acquired data without the use of additional toolkits.
Jonathan Hildyard
Applications Engineer
National Instruments
Attachments:
DAQ_with_Print.llb ‏115 KB

How to delete the duplicate data from PSA Table

Dear All,
How to delete the duplicate data from PSA Table, I have the purchase cube and I am getting the data from Item data source.
In PSA table, I found the some cancellation records for that particular records quantity would be negative for the same record value would be positive.
Due to this reason the quantity is updated to target but the values would summarized and got the summarized value of all normal and cancellation .
Please let me know the solution how to delete the data while updating to the target.
Thanks
Regards,
Sai

Hi,
in deleting the records in PSA table difficult and how many you will the delete.
you can achieve the different ways.
1. creating the DSO maintain the some key fields it will overwrite the based on key fields.
2. you can write the ABAP logic deleting the duplicate records at info package level check with the your ABAPer.
3.you can restrict the cancellation records at query level.
Thanks,
Phani.

I used time machine to restore on a formatted MAC. Now the HDD space has reduced by 100GB but I cannot see any of the files. How do I find and delete those 100GB data from the HDD?

I used time machine to restore on a formatted MAC. Now the HDD space has reduced by 100GB but I cannot see any of the files. How do I find and delete those 100GB data from the HDD?

dglenn9000 wrote:
I created a new user account just to see if it was my user Library or if there was something wrong with my system. And the new user account is doing most of the same things so I will need to do a full restore anyway.
Not necessarily. I'd suggest downloading and installing the "combo" update. That's a combination (thus the clever name) of all the updates to Leopard since it was first released, so installing it should fix anything that's gone wrong since then, such as with one of the normal "point" updates. Info and download available at: http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards.

When I am on my home screen on the iPhone, swipe left to the search page. Put a letter in the search field. then scroll down. eventually you get to all your texts previously deleted or not. The are all there. How can I clear the entire text from the phone

When I am on my home screen on the iPhone, swipe left to the search page. Put a letter in the search field. then scroll down. eventually you get to all your texts previously deleted or not. The are all there. How can I clear the entire text from the phone

When I am on my home screen on the iPhone, swipe left to the search page. Put a letter in the search field. then scroll down. eventually you get to all your texts previously deleted or not. The are all there. How can I clear the entire text from the phone

How can delete my iphone5 data from the date its restored?

how can delete my iphone5 data from the date its restored?

it's unclear what you mean
if you wish to remove your iphone5 data you connect it to iTunes on the computer and click the restore button and choose restore to factory defect

RICS0001:Internal Error,unable to process the collected data from the device.

Hi all,
I've got the following error in Inventory Collection: 'RICS0001:Internal Error,unable to process the collected data from the device.'
System is CW LMS 2.6
If I search the web I get the following Cisco document:
http://www.cisco.com/en/US/products/sw/cscowork/ps2073/prod_troubleshooting_guide09186a008036dff2.html
'...in the log directory look for IC_Server.log.'
IC_Server.log:
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,173,Got Async Request, User Name :admin
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,179,Request ID is : 1289919235488
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,309,Started processing device ID: 3341
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,724,com.cisco.nm.rmeng.util.db.DatabaseConnectionPool,getConnection,59,Inside ICSDatabaseConnection, MAX_COUNT =20
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,387,Started processing device Name: 9.152.255.101
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,103,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, begins...
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,110,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device begins...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,147,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device successful...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,149,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population begins...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,216,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:Before method getSlotsConfiguredStatistics
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,225,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:After method getSlotsConfiguredStatistics
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,245,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population completed...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,105,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, ends...
[ Di Nov 16 15:54:43 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,477,DP time is 15 seconds for 9.152.255.101
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,770,com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange,effect,33,Unexpected error :com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
    at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
    at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
    at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
    at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
    at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
    at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
    at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
    at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
    at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
    at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
    at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
    at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
    at java.lang.Thread.run(Thread.java:534)
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,448,ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
    at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
    at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
    at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
    at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
    at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
    at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
    at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
    at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
    at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
    at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
    at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
    at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
    at java.lang.Thread.run(Thread.java:534)
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,861, Exception occured in process method while processing: 9.152.255.101 ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
ICSException :: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
    at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:463)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
    at java.lang.Thread.run(Thread.java:534)
I don't know where the German error message comes from. The whole system is English. Translation is: "ASA error -192: primary key for table 'PhysicalElement' isn't distinct'
Thanks for your help!
Alex

Well known issue in LMS 2.6. Most likely you are hitting CSCsm97530. As a temporary solution you could remove and re-add problematic device from CS. To get a permanent fix you need a patch (provided by TAC).

LMS Prime 4.1 RICS0001:Internal Error,unable to process the collected data from the device.

Hello,
I have a problem with inventory collection from several devices getting
"RICS0001:Internal Error,unable to process the collected data from the device."
ERROR,[Thread-20],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,918,Device does not exist in RME, Please check if device is already deleted

Did you schedule an inventory collection job?
Delete schedule and recreate it using device group.
Cheers,
Michel

I use since 1 year iTunes match. Do I get a mail from apple to renew my subscription or do I have to renew my subscription for my own? I don't know the exactly date from the end of lifetime?

I use since 1 year iTunes match. Do I get a mail from apple to renew my subscription or do I have to renew my subscription for my own? I don't know the exactly date from the end of lifetime?
Kind best regards - sunshine34778

The subscription will renew automatically (unless you have disabled that) and you will get an email approximately one month before renewal.

My Laptop with Synced Firefox crashed and i had to do a fresh install, how can i retrieve all the synced data from the Mozilla Servers

I had set up Firefox sync on my Windows 7 Laptop which crashed and I had to reinstall windows. I used to be able to share content with my Firefox synced Android too. Is there a way i can retrieve the synced data from the Mozilla servers? I tried to set up sync on my new installation on a Mac 10.6 but when i click on Set-up Sync it asks me:
# Set-up new sync account (i already have one)
# I already have a sync account
When i select the second option it tells me to Add a device. I went in the "Sync Options" and tried the replace all data on this computer with my sync data, but nothing happened. When i try to connect from my Android it also asks me to add a device with the 3 boxes with letters in them.
So in both the cases it is asking me to "Add a device" but i cannot connect to my sync account in either case to sync data from there

Please search the forums. This has been covered here extensively.

To retrieve the Maximum Date from the record

Hi All,
I am using the bleow query to retrieve the max date from the record list:
select w.wr_no,w.customer_id,w.place_id, w.entry_Date, max(app.appointment_date) as appointment_date
from work_request w , wr_appointment app
where w.wr_no=app.wr_no
and w.customer_id = '020167001'
and w.place_id = '1151667'
group by w.wr_no, w.customer_id,w.place_id, w.entry_Date;
However i am getting the as many as three rows even after using the max function. The max date comes as the last record out the three rows retrieved.
Thanks,
Mark

Mark Andrew wrote:
And for Sven for the above customer id and place id, i receive the below result:
WR_NO CUSTOMER_ID PLACE_ID ENTRY_DATE APPOINTMENT_DATE
1306782233 020167001 1151667 26/07/2010 29/07/2010
1387090103 020167001 1151667 26/02/2010 16/03/2010
1393896673 020167001 1151667 23/01/2011 25/01/2011
After using the rank function i will be receiving:
WR_NO CUSTOMER_ID PLACE_ID ENTRY_DATE APPOINTMENT_DATE RK
1393896673 020167001 1151667 23/01/2011 25/01/2011 1Now I get it.
In fact you want to group only on the customer (and place_id?) and get all the information from the line with the last appointment date.
Analytic functions such as RANK or ROW_NUMBER are good for this.
The select can look like this.
select * from (
   select w.wr_no,w.customer_id,w.place_id, w.entry_Date, app.appointment_date,
         row_number() over (partition by w.customer_id, w.place_id order by app.appointment_date desc, w.wr_no desc) rn
   from work_request w , wr_appointment app
where w.wr_no=app.wr_no
--and w.customer_id = '020167001'
--and w.place_id = '1151667'
where rn = 1
;In fact I think you can do the same operation in EXCEL directly.
FIrst you need to sort the data by customer (asc), place (asc) and appointment date (desc).
Then add a column in excel that give you the line where you have a new customer id.
Assuming this new column is column H and the customerid is in column A then the function in Cell H2 would look like this.
A function like ("=A2=A1"). Copy this formular to all the other H cells.
Then add a auto filter on it and only select all the rows where the result is FALSE.
Same logic as in SQL, but done in Excel.

Variant must get the current date from the system.

Hi All,
I really appreciate your help on below please;
I need to create a variant and schedule a report program once a day.
But variant must get the current date from the system (sy-datum).
The program should run for the values in the variant in schedule job run;
Can I do this using SAP variants (for Report Program) and schedule the job.
Many thanks
Iver

Standard functionality.
http://help.sap.com/saphelp_nw70/helpdata/en/c0/98039be58611d194cc00a0c94260a5/frameset.htm
Thomas

How to get the current Date from the system?

How do I acquire the current date from the system? Also, if possible, can I assign the day, month and year separately into three variables and how? It would be thankful if some simple Example could be given. Thanx!

import java.util.*;
public class count {
public count() {
Calendar now = Calendar.getInstance();
int month = now.get(Calendar.MONTH);
int day = now.get(Calendar.DAY_OF_MONTH);
int dayyear = now.get(Calendar.DAY_OF_YEAR);
int year = now.get(Calendar.YEAR);
int a = 365;
int b = a - dayyear;
System.out.println("The day is the" + " " + day);
System.out.println("IT is the" + " " + month + " " + "month of the year");
System.out.println("The year is" + " " + year);
System.out.println("This many days till next year" + " " + b);
public static void main(String[] args) {
count cou = new count();
}

"Could not get the audio data from the file" error

Hi
I get a lot of "Could not get the audio data from the file" errors when opening a project. Sometimes they crash Premiere Pro CC 7.01 (Mac). But if not Premiere works as usual, with the audio.
I tried to convert the audio files (coming from Audition) from 32 to 16 bit. It worked while opening a project once, but not the following times.
Where can it come from ?
Edit: I also get this error when importing audio: "Error: Premiere Pro version 7.0 is not compatible with the Premiere Pro Plug-in version 5.7.4". Maybe it is connected.

Got it! It was the Smartsound plugin making trouble. Got rid of it and no more errors.

LMS 4.2.4 Error RICS0001:Internal Error,unable to process the collected data from the device.

Hi
LMS 4.2.4 inventory collection fails with Error RICS0001:Internal Error,unable to process the collected data from the device for few devices.
Can anyone help me out.
Regards
Laxmi

They are definately supported. However such issues are usually due to device packages, if unavailable or not installed.
Please do following :
1. Check Admin > software centre > device updates and check any devices packages available in Cisco.com and install it and recheck.
2. Please do a snmpwalk on problematic device on sysObjectID and share result. Following is the way to do snmpwalk :
GUI - Open the device in Device Centre (Inventory > Tools > Device Center) and open the device with IP and from tools select snmpwalk and do it for sysObjectID (1.3.6.1.2.1.1.2)
CLI : CD to NMSROOT/objects/jt/bin from command prompt. run command as per following syntax:
snmpwalk -v2c -c <snmp_community_string> 1.3.6.1.2.1.1.2
Example :
community string = test123
IP = 10.1.1.1
snmpwalk -v2c -c test123 10.1.1.1 1.3.6.1.2.1.1.2
3. Please check your device package, by clicking on the number of packages in front of Inventory, conifg and image management from :
Admin > System > Software Center > Device Update
Also, check device identity under edit identity option from :
Inventory > Device Administration > Add / Import / Manage Devices
Check my screenshots for details :
Please check and share results.
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

To Delete the Entire Data from the Tables

Similar Messages

Maybe you are looking for