To delete the transport request.

when i'm trying to delete the transport request by using se09, it responses with " Request/task BWDK916118 cannot be deleted because it contains locked objects." That request is created by me. It showing same name but it will not allow me to delete. Please help to delete how to delete that request.
Thanks
Satish

Hi..
Basically you are getting this messge because first you have to delete all the objects of the underlying sub requests and then the subrequests ......then finally the actual request.................
Secondly, it is better to unlock all the objects first so that you can delete all the objects at a time..............because if you have to delete all the objects one by one.....and if each requests contains 100s objects then it is very tedious to delete all the objects one by one...
Go to SE03 --> There you will get the options "Unlock Objects (Expert Tool) " --> Click over there --> give the subrequest nos and unlock it....
Then go to SE01 --> Click on "Objects" tab --> You will get the change button --> click on it --> Select All and Delete at a time...
Regards,
Debjani..

Similar Messages

How delete the Transport request in Development system

Hi Guys,
I have created one Transport request and released (not moved to other system), now I don't want that request to transport to other systems.
I need to delete the Transport request, could you please suggest how to delete the Transport request.
Please provide the steps to delete the Transport request.
Thanks,
Gourisankar.

hi Gaurishanker
check this thread
How to delete transport request if child request was released
hope it helps you.
thanks
Sachin

How to delete the Transport Request?

Hi all,
I want to delete the Transoport Request from Production Box( we have 2 request number... one child another one parent). I released the Child Request. Now i want to delete that request. we don't have setup in our production Box i think(in order to release that we don't have setup in Production Box).
Any Idea? I know how to delete that Transport Request. If i try to release that i'm getting TP(Transport Profile error) with return Code 12. it suppose to handle by Basis. My basis consultant is not aware of how to work on this?
Regards,
Nagesh Ganisetti.

I am not sure I understand.
You release the request in the system you created, not in another system (in your case production). It will then go to the import queue of the target system.
Transports will be configured in all the systems in your landscape (including production).
Just by releasing a request, it will not go to the target (unless it is configured so, not likely if the target is production), someone has to import it into the target. I assume you do not want this request to go to target. In this case, release it, then go to STMS, import queue, and delete it from there.
Added -
I now see that the request is in production.
Igore the above in that case.
If you are not able to release it, let it be. If you are doing an upgrade/support pack, you will need to release it.
When you try to delete, what message do you get?
Message was edited by: Ajay Das

How to delete the Transport Request release from SE09

Please let me know How can I delete the New Transport release request from SE09 and if I HAVE OBJECTS SUCH AS Process chain and process variant, infopackage in one request. Being A NEW request it has Delevelopment correction ABDK904193 under main request ABDK903667, should I double click on ABDK904193 FIRST AND then go to request editor and change - display and select all request and delete it and save and then delete main request ABDK903667. If I do this will there be any problems on Process chain Objects such as locking or unlocking. let me know if there are any more steps that need to be taken to avoid any trouble.
hope u will help me asap
thanks
hardeep

Hi Hardeep,
Allways delete child node and then parent node.Coz Parent node does not allow you to delete straight away so first delete child node either by double clicking and select all>>delete or individually select each object by placing cursor on it and say Delete by pressing the Delete Icon..it will prompt u message obj is locked press delete that will delete the object, subsequently when all objects are deleted then delete the request also.
when u delete a request all the objects saved or locked onto that request are released or unlocked.
So all the objects that were previously locked or saved onto a req are now ready to save into another req.
Simply say, once the objects are deleted from the req they are independent again with latest changes and readily available to save onto a diff req.
another option is release the req but do not transport it to target system.
Regards
Ellora

Unable to Delete the Transport Request running since a long time - urgent

Hi all
I had a transport request of a DSO , which is running since a long time.
I had deleted it from STMS , & also from the tables TPSTAT, TRJOB, TRBAT; TMSTLOCKR;TMSTLOCKP
But still the entry is shown running
& because of this all my tranport work is pending , & not moving,
Can anyone help me out.
Regards,
ramesh

Hi
1. There are no more entries in TRBAT.
2. I have deleted the RDSEXCEL jobs also
3. I have restarted the Server as well. & tried to manually buffer the requests to the queue.
But still whevner i refresh the Import MOnitor, it gets hanged.
How do i unlock the queue ?

Delete the transport request Objects already transported

Hi,
I have a request which contains two function grps ( 'Z') , along with it function modules (Z) and related objects ( Z data elements, Z Classes, Z table types and Z table structures).
By mistake this request is transported from System1 to system2.
How can i delete them in system2. One way is manual, but guess some problems could occur in it.
Is there any other easier way.
Thnx.

Hello
You have two options to achieve your goal:
1.a) Create a new transport request (system 1) and include all objects that have been imported into system 2. Release this request as backup for restoring the objects in system 1.
1.b) Delete all objects on system 1 (creates a new request), release the request and import these DELETE entries into system 2.
1.c) Re-import the first request (1.a) into system 1 to restore the deleted object.
2.) Change the source system of the objects imported into system 2 to this system 2. Then you can easily delete these objects in system 2.
NOTE: Approach (1.) is only feasible if you do not have too many cross-references to the deleted objects.
Regards
Uwe

Problem in deleting the transport request number

Hi All,
I have created a TR for a program.When i made an attempt to delete the TR(not yet released) using the Tcode se10 its displaying a message saying that the request cant be deleted as it contains the locked objects.Could anybody guide me in this regard.
Thanks & Regards,
Kishore

Hi,
go to se01
and click display
see the object the request contains and delete the
object it contains and try deleting it.
Regards,
V.Balaji
Reward if Usefull...

Re-transport the transport request to NQA server after system refresh

Hi
Users are moving the transport requests in NQA (quality server) using STMS tcode and Basis team is moving the trasnport requests using TP command in operating system level.
There are some transport requests that are released and are moved only to NQA server but not in Production server.
After the NQA refresh from Production server, we need to re-create the trasnport route for NQA server
in NQA using SE06 and STMS.
Now users want to re-transport the requests again in NQA server that was moved to NQA before the system copy but they are not able to make it. In the transport queue, users are able to see their transport requests but they are not able to re-transport.
When basis team try to move the same transport requests using TP command in operating system level, it failed with error:
- "Transport request is not in buffer".
- x2n0v2:nqaadm 14> transport250_NQAu126 908807
/usr/sap/trans/NDV/cofiles/K908807.NDV
is this the correct cofile ?y
cofile is K908807.NDV
source system is NDV
transport type is K
transport name is NDVK908807
Renamed to K908807.NDV.INTRANSIT on dbcindv
Datafile copied to dbcinqa
Cofile copied to dbcinqa
-rw-rw-r--   1 nqaadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NQA/data/R908807.NDV
-rw-rw-r--   1 ndvadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NDV/data/R908807.NDV
-rw-rw-r--   1 nqaadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NQA/cofiles/K908807.NDV
-rw-rw-r--   1 ndvadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NDV/cofiles/K908807.NDV.INTRANSIT
Please compare the files before proceeding
Do you wish to continue the import?y
tp addtobuffer NDVK908807 NQA pf=TP_DOMAIN_NDV.PFL
This is tp version 305.13.25 (release 46D) for ANY database
Addtobuffer failed for NDVK908807.
Cofile not existent or corrupted (datafile exists).
If source system is available you may try to reconstruct
the cofile using the command "createinfo".
We used the following method to re-transport the requests to NQA server:
"STMS --> Request -->Delete (the request number)" method delete the transport request from transport queue and from the cofiles/data directory of the operating system and then " STMS --> extra-> other request-> add" allow us to put the transport request back to transport queue in NQA server. Once the transport requests are in queue, we can re-transport all of them one by one or in group.
Question: Is it the right way to re-transport the request in NQA (first delete if from transport queue and then add and then re-import in NQA server).
Id there is any other way to re-transport the requests, pls suggest us.
Thanks
Amar

Amar,
Depending on how many tarnsports you have and also if this is one time, what you can do is ask Basis guys to write a small script which adds to the buffer to your NQA system.
Steps:
1) under /usr/sap/trans/buffer rename the NQA buffer file.
2) create a new empty file NQA (make sure permissions are identical)
3) Provide the list of transports and ask Basis team to put it in a file at Unix level
4) Run a script which will add to the buffer from the source file.
5) From STMS refresh the NQA queue and you should see all the transports ready for import.
Hope this helps.
Thanks,
Naveed
Edited by: Naveed Qureshi on Dec 4, 2008 8:52 AM

Re-transport the transport request in Quality server after System refresh

Hi
Users are moving the transport requests in NQA (quality server) using STMS tcode and Basis team is moving the trasnport requests using TP command in operating system level.
There are some transport requests that are released and are moved only to NQA server but not in Production server.
After the NQA refresh from Production server, we need to re-create the trasnport route for NQA server
in NQA using SE06 and STMS.
Now users want to re-transport the requests again in NQA server that was moved to NQA before the system copy but they are not able to make it. In the transport queue, users are able to see their transport requests but they are not able to re-transport.
When basis team try to move the same transport requests using TP command in operating system level, it failed with error:
- "Transport request is not in buffer".
- x2n0v2:nqaadm 14> transport250_NQAu126 908807
/usr/sap/trans/NDV/cofiles/K908807.NDV
is this the correct cofile ?y
cofile is K908807.NDV
source system is NDV
transport type is K
transport name is NDVK908807
Renamed to K908807.NDV.INTRANSIT on dbcindv
Datafile copied to dbcinqa
Cofile copied to dbcinqa
-rw-rw-r--   1 nqaadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NQA/data/R908807.NDV
-rw-rw-r--   1 ndvadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NDV/data/R908807.NDV
-rw-rw-r--   1 nqaadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NQA/cofiles/K908807.NDV
-rw-rw-r--   1 ndvadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NDV/cofiles/K908807.NDV.INTRANSIT
Please compare the files before proceeding
Do you wish to continue the import?y
tp addtobuffer NDVK908807 NQA pf=TP_DOMAIN_NDV.PFL
This is tp version 305.13.25 (release 46D) for ANY database
Addtobuffer failed for NDVK908807.
Cofile not existent or corrupted (datafile exists).
If source system is available you may try to reconstruct
the cofile using the command "createinfo".
We used the following method to re-transport the requests to NQA server:
"STMS --> Request -->Delete (the request number)" method delete the transport request from transport queue and from the cofiles/data directory of the operating system and then " STMS --> extra-> other request-> add" allow us to put the transport request back to transport queue in NQA server. Once the transport requests are in queue, we can re-transport all of them one by one or in group.
Question: Is it the right way to re-transport the request in NQA (first delete if from transport queue and then add and then re-import in NQA server).
Id there is any other way to re-transport the requests, pls suggest us.
Thanks
Amar

No cross posting
Read the "Rules of Engagement"
Regards
Juan

How to delete the entries from the transport request

i need to delete the entries programatically from the transport request for all the entries which is exists in the package for the tables e070 and e071.

Hi,
I think you need to have authorization for that thru auth group SA.
One more thing is where ever its created like source client only you can do if u have authorization.
Regds
Sivaparvathi
Please reward points if helpful...

The correct way to delete old transport request record ?

Dear all,
We want to delete old transport request record before 2008 (two years before) of our system.
We learn that we should delete the records in the below two path:
/usr/sap/trans/data
/usr/sap/trans/cofiles
Our target is that we will not see the old record after deleting in our PRD system.
Normally, we see the transport request record in system by this way:
STMS --> import overview --> PRD --> Import Queue system PRD --> Import history
Our question is do we need to restart our system after delete the record to refresh the Import history?
We have not delete the record now.
Any experienced or expert, please kindly give advice.
Regards,
Allen

Hello Allen,
there are some notes and documentations for this process. Deleting the files from /cofiles and /data will not erase the request from the import history, as you already know.
You should follow note #41732 to have the requests/data completely deleted from your system. There is a lot of complementary reading in notes #7224, #556734, #189841, etc.
Note that you can remove the request from the import queue, import history, data and cofiles subdirectory, but still have it on the <SID> buffer (located in /usr/sap/trans/buffer/<SID>). If this happens to you, please save a copy of the buffer file <SID>, then create a new, blank file named <SID> at a time when the import queue is empty (VERY IMPORTANT). Or, alternatively, please excute the tp cleanbuffer FIL command (which will erase the requests that are not found in /data and /cofiles directories).
--> Please test this first on a test system, not directly on a productive environment.
This should be enough to delete old transport requests on your system.
Best regards,
Tomas Black

How to delete unreleased transport request where the objects are locked

Hi Experts,
I was created a transport request, but I am facing some probelms with taht request, now I want to delete transport request. I tried to delete them in SE10, I am getting message that the objects are locked. Please tell me how to delete unreleased transport requests where the objects belong to this transport request are locked.

Hi,
First go to transaction se03 Choose "Unlock Objects (Expert Tool)" option under "Requests/Tasks" and unlock your task,
Than go to se10 and delete what you want.
I hope it helps.
Bulent

Function Module not being displayed in the Transport Request

Hi,
I Created a FM "RH_ACTIVATE_WFOBJECT_AFTER_IMP" in my SAP System. After I created due to problem in editing I have deleted the FM and also deleted it from the request.
I have re created the function module and if I see the object directory entry I find the following
Identical request locks
Request User Task/request Object
**** ***** R3TR FUGR RHWS
In the request I cannot find the function module but only the function group. Please help me to get my function module visible in the transport request.

Hi ,
When your creating the FM for first timw with new FGRP then no need to worry .
You can see only the FGRP in the transport request number and when you move this transport request to further systems your FM automatically transport with the FGRP.
Next time when your creating a new FM under the FGRP which is already moved to production you can see only your FM name under the transport request.
When you go to FGRP main program by follwing the path
FGRP -> Disply FGRP in SE37 you can see the main program of the FGRP there if you see one include with TOP and XX .
double click on the XX Include.
there you can see allthe FM under that FGRP.
Thanks
Naresh

Import back the transport request to Development Server

Hi All,
I need to import back the Transport request which is in Quality Server to Development Server.
For ex: DEV900764 from Quality to Development Server.
But the same(DEV900764 ) transport request is available in Development also.
How to overwrite the transport request which in Development server ?
I deleted the request in se01, stms in DEV server.
Once i updated the copy of Quality to Development in co-file,data file in OS level. But still it show the old one(DEV copy) while importing thro' stms in development server.
How to solve this ?
actually i need the data of quality transport request

Hi Milan,
Even though you have deleted the request in Development system and later copy the co-file and data file from Quality to Development it will be the same. What is the reason of transporting from Quality to Development.
Normally requests will move from Development to Quality and to production as you already know. Once the request is released from development and transported to next systems that request will have same data in the request what it was at the time it was released and whenever you re-transport that request it will have same changes.
Why you want to do from Quality to development. If you find any differences in the changes of quality and development then some one might have done the chages directly in quailty with client being opened. If it is the same case then you need to take care of the system and avoid any direct changes. If as per my assumption if really there is any difference then make the necessary changes directly in development instead of wanting to transport from Quality.
Transporting from Quality to development is not good practise.....
Regards,
Sharath

When is the entire function group added to the transport request

When you modify a functionmodule in a function group, only the object of the functionmodule( LIMU FUNC) is added to the transport request.
When you modify an include of the function group, the reportsource of that include (LIMU REPS) is added to the transport request.
But under some circumstances the entire function group is added to the transport request (R3TR FUGR).
Can somebody clarify under what circumstances the entire Function Group is added to the transport request?

I was actually looking for the reason why I would find R3TR FUGR objects in requests for existing function groups.
What I found out is that R3TR FUGR is added to the request when :
- the function group is created
- a function is renamed
- the function group is deleted
- you choose : Write Transport Entry, in the context menu of the Function group.
The actual problem was that in our upgraded system (ERP2005) we had a transport containing the function group (R3TR FUGR) and we thought none of these actions had been taken. After talking to the developer in question, I found out he did rename a function module, so I have my solution.
But thanks everybody for the insight.
Message was edited by: Dries Horions

To delete the transport request.

Similar Messages

Maybe you are looking for