To develop Z-Report related to Cost Analysis as in COR3

Hi,
I am trying to develop a Z-Report similar to Cost analysis as in COR3, I just want to know the tables where actually the Planned Qty,Planned Cost,Actual Qty,Actual Cost are getting stored.My requirement is to run it for Multiple Orders with some more fields to add on(for eg. Accounting Document).Please help.
Regards,
Sandeep

For finding out the tables.
use st05> activate the trace> then come back COR3 then execute the same . after showing the output--> go back st05 and deactivate the trace and then use list trace. There you can all tables used in COR3
a®

Similar Messages

CO03 cost Analysis report to BW Report

I need to create a report in BW same as (CO03) Cost - Analysis, I want to create an extractor that extract data the same as what the (CO03) Cost - Analysis shows, but unfortunately i dont know from which and what table, selection condition should i need to use for my extraction.
or can anyone tell me what function module is used by SAP for this and is it possible to use it in my extractor?
Thanks you very much in advance

Hi Joher,
You can look for Controlling extractors in R/3
Basically
0CO_PC_01
and other data sources related to that.
Also you can look for transaction SBIW and there you can look for Controlling and profitabilty analysis(COPA).
basically it covers all the requirements.But it will contain only those orders which have hit your accounts.
But basically CO03 is related at production planning and maintenace then you try for other sources also which are present in standard extrator those starting with
2LIS_17_.....
This all data sources are based on the PM.
I
I think it should help.

Cost Analysis Report - For a range of process orders

Dear all,
Is there a standard report available to get the cost analysis for a range of process order? COR3 --> Go to --> Cost --> Analysis. Here I can see the cost analysis for one report. But I wanted to get the cost analysis report for a range of process orders. Please help.
Thanks
Nagarajan

Dear
You can use cost analysis report like
1.S_ALR_87099932 - Variances Between Costing Runs
2.S_ALR_87099931 - Price vs Cost Estimate
3.S_ALR_87099932 - Variances Between Costing Runs
5.KOC4
Regards
JH

Analysis report for standard cost in CK33N

Hi,
Analysis report for standard cost
Using variant Z003 in CK11N.
Planned cost 3 is the output used for planning and this is adjusted by making changes to the BOM throughout the process
In CK33 you compare the 2011 cost for the product with the proposed cost for the next year. For some parts it works and for others it splits the lines, though the calculation is still correct.
Regards,
T.Harish Kumar

Hi Revital,
I believe the last option is correct.
Thanks,
Gordon

Report S_ALR_87010175 - Posted depreciation, related to cost centers

Hi experts,
I run report S_ALR_87010175 - Posted depreciation, related to cost center. I canu2019t fill field Cost Center on the selection screen . Help for dictionary is available. I run this report withouh filing this field but I havenu2019t field cost center on report. I h've changed loyout and inserted cost center, but field Cost Center is empty. Why?
Rgds Stenwa

Hi,
You can get the field "Cost Center" on the selection screen, by selecting the " + " (All selections = Shift + F7) button.
In the report output, you will get the cost center as sorting field & the sum field. You can the details in the layout change, click the layout button in the right edge to get the option to change / select / save the layout.
VVR

How to get Cost element for a component in co03 cost analysis report

Hi,
I'm using table COSP to find the quantity for a production order component. However, I need to identify the cost element first to get the unique data. In CO03 cost analysis report, there is cost element for the component. Does anyone know how to get it ?
Thanks.

CSKA stores the basic info about the cost element
There is no data in CSKB.
I'm trying to use different tables to get the cost element.
AUFK, AFKO, AFPO, RESB, ...but no luck...

Hide Amount column in COR3 cost analysis report

Hi Expert,
We need to hide the amount column in COR3 when user go to costs -> analysis. Because we don't want PP user to see the cost informant but the need to see the quantity for actual and plan to make sure goods issue is really complete. Would you please advise how to achive this purpose?
Thanks and Best Regards,

hi gimmo,
thanks for the quick reply. however, i think this is only possible if i am using a structure in my rows, because there i can specifically assign the appropriate calculated key figure to use. i need to use the hierarchy because we'd like to present the report down to the account number level.
thanks

Pocess order - target quantity in cost analysis report

hi experts ,
i am not getting the target quantity in cost analysis report of header material , though i have made the GR of the process order .
target quantity is showing zero.
i am getting target quantity of components , sfg used.
kindly give your inputs.
reagrds,
satish

Dear
First Check the Validity of the standard cost for the header material, It can be seen in ck13n, Dates tab.
Target costs are populated when you do the goods receipt. System will search for the released standard cost estimate and then apply that for each material component. If these 2 conditions are passed, then you will get target cost in order.
Plan cost = Plan qty * std cost estimate
Target Cost = Actual qty * std cost estimate
Actual cost = Actual qty * actual costs
Eg:
A production order is planned for producing 10 units of a material
Then plan cost on the order = 10 units * std cost
Target costs are calculated once production is confirmed.
Suppose only 9 units were produced out of 10 planned
Then target cost = 9 units * std. costs
Regards
Ganesh M

Total Target Cost in Cost Analysis report

Hi Everybody,
I have come across a problem. In transaction cor3 when I give the process order then in goto>costs>analysis in the given report I wouldnt be able to find the relevent tables for the field 'Total Target Cost' if someone could help me from where I will be able to reterive this field data int he definition they gave me the fomula
Total Target cost = Target Cost debit + target Cost credit.
If someone have any information regarding target Cost Debit and Target Cost Credit please help me out. I will be very thankful to him or her.
Regards,

Hi Everybody,
I have come across a problem. In transaction cor3 when I give the process order then in goto>costs>analysis in the given report I wouldnt be able to find the relevent tables for the field 'Total Target Cost' if someone could help me from where I will be able to reterive this field data int he definition they gave me the fomula
Total Target cost = Target Cost debit + target Cost credit.
If someone have any information regarding target Cost Debit and Target Cost Credit please help me out. I will be very thankful to him or her.
Regards,

Activity type origin text doesn't have been showed on Cost analysis report

I have defined three acitivities TMAQ, TMO, CIF. But the origin text column of these acitivities is not showing in cost Analysis report(althoug the origin is showed), i.e. when we go to an order & navigate to "Cost Analysis". TCODE:CO02 (Production order)
Anyone knows how to show the origin text ?
Thanks a lot for your comments.
Vero

Hi Veronica
I think maybe it´s missing the description in language you are running the report.
Check transaction KL03 to see if the activity type has the description in the language you are logged.
If not go to KL02 and update the description and try to run it again.
Regards
Fred

Cost analysis report

Hi,
In a production order we can go to 'Cost Analysis' to check plan / target / actual / variance values.
What is to be done if we need a collective report of multiple orders.
is there any standard report?
thanks in advance.
neeraja

Hi Neeraja
Set up summarization hierarchy in KKR0 - Execute KKRC to collect data and Execute KKBC_HOE
KKRC will be monthly activity to be done after each period end closing i.e. after settlement of orders
br, Ajay M

Library develop report with report painter in Cost Center Accounting

Dear experts!
Now, I'm getting some issue about finding library for developing report with report painter.
Really, i don't know libraries that are used to develop report with report painter for Cost Center Accounting.
Can tell me about them?
Help me, please.
Best regards, Huy

Hello Huy,
CCA reports would be based on table CCSS, you can go to transaction GRR2 and check the various libraries listed there and find a suitable one. You can also use libary 1AB which contains the various cost center variance reports or you can use transaction GR21 to create your own library.
Kind Regards // Shaubhik

CO03 function module for cost analysis report

Hi
Can anybody pls let me know the function module for which gives the cost analysis data in CO03 transaction.
Regards

Hi
I'm sorry; BAPI_INTERNALORDER_GETDETAIL, this BAPI did serve my purpose
Pls let me know if any other FM.
Thanks for your help.
Regards

Cost Analysis by Sale Order

Hello,
I'm seeking to enable in BI a Cost Analysis Scenario with repect to the Sales Orders. That is, something similar to the analysis you can easily perform in the R/3 area Accounting -> Controlling -> Product Cost Controlling -> Product Cost by Sales Order.
For instance in standard report KKBC_KUN, you can choose a sales order number and get all the cost elements related to that sales order, with the corresponding costs.
I have examined the following objects provided by the BW's Business Content:
- InfoCube 0PC_C01: it contains only the costs related to production orders, and not the costs associated with sales orders.
- InfoSource 0CO_OM_CCA_9: it seems interesting, in fact it delivers some header and line item data of the Controlling Object Document. Unfortunately it doesn't deliver the crucial characteristics Controlling Object and Controlling Object Type, which I definitly need for enabling my analysis scenario!!
(By the way, are these 2 characteristics delivered by the BC? There exists a 0COSTOBJ characteristic, but it's not used by any object in the flow afterwards. Moreover, I can't find a standard DataSource in R/3 which I can use to load either its attributes or its texts, and see what data enter it..)
Business Content for Product Cost by Sales Order), but none could help me.
It seems really weird that it's not possible to carry out a Cost Analysis by Sales Order in BW, so if anyone has some suggestion it'll be very appreciated indeed.
Thanks & Regards, Davide

I eventually found the following SAP Note. No BCT for this analysis scenario....
Note 584791 - BW-BCT-CO: Costs not extracted on sales orders
Symptom
In R/3, costs are posted directly to sales orders. The costs have to be analyzed in the BW system. In the standard system, however, this data is not extracted into the BW system.
Other terms
0CO_OM_OPA_1; 0CO_OM_OPA_6
Solution
1. There are currently no DataSources for costs on sales orders in the standard BW Business Content. Unfortunately, there are currently no resources scheduled for a new development in this area either.
2. Therefore, the DataSources and the Business Content must be created in the customer project within the framework of consulting as a customer solution concerning the generic extraction options of the BW Service APIs or function modules you have programmed yourself for extracting data.
3. Technical background information about costs on sales orders:
The transaction data is available in the following R/3 tables
COSS and COSP - Totals records or COEP - Line items.
This concerns records for the VB* object numbers.
The master data of the sales orders is contained in the VBAK and VBAP tables.
The 0CO_OM_OPA_1 and 0CO_OM_OPA_6 DataSources only extract costs for orders with master data in the AUFK table. These types of requests always have OR* object numbers. Therefore, these DataSources cannot be used for sales orders.
However, you may be able to assign requests from the AUFK table (for example, maintenance orders or production orders) to a sales order through the AUFK-KDAUF table field.

Process Order Cost Analysis Target and Actual Quantity Missing

This is related to Process order costing .
Issue : Before activating Material Update field in Costing view 1 of Material master , we have created few process orders and Delivered .
Hence cost analysis shows Actual and target cost fields Empty in COST ANALYSIS report of order . After Updating field in Material master , New Process orders are calculated with Actual and Target cost .
Solution needed : How to do Actual and Target cost estimation back in cost analysis report for old process orders which are created before Material Update field ?

You have deleted the Component in the BoM.
Then you have created a production order, check if the start date of this order is after the date change in the BoM..... Can be that the component stills exists in the order ? Have you tried deleting the compoent in the order BoM ?

To develop Z-Report related to Cost Analysis as in COR3

Similar Messages

Maybe you are looking for